Can't create wifi with macbook pro

recently after i have bought my new mbp 13.3 released 2014 it recognized my wifi at home but then i attempted to update my operating system , but it fails , after rebooting i can't connect to the wifi the tool bar says wifi-no hardware installed, i have run hardware test, everything seems fine
i connected by ethernet , updatec to the latest OS , but the problem still exists. i have done every trick to fix the problem, i even contacted apple help desk but no good answer
please let's share this issue and solve it.

We'll need some more information.
When you try to connect what are you seeing?
When you go to Network Settings (System Preferences > Network) what does it report? Does Wi-Fi say Off or On? (This image is from an iMac connected via wire to the network but I wanted to give you an example of the screen). Does your Wi-Fi say Connected or off?
Do you see something similar in Wi-Fi as what I have shown below for Ethernet? Basically does your Wi-Fi in "Status" say "Connected. Wi-Fi is currently active and has the IP address xx.xx.xx.xx."? If it does not then you are not even seeing the Wi-Fi network.

Similar Messages

What is the highest memory I can up grade to with macbook pro 4,1?

What is the highest memory I can up grade to with macbook pro 4,1? I want to upgrade to Mountain Lion, but only have 2 gb RAM.

DDR2 - 667Mhz is the RAM for your Macbook.....
You can upgrade to 6GB if you prefer to do so.......
But you can get away with 4GB.....
Check this RAM out for your Macbook
http://eshop.macsales.com/item/Other%20World%20Computing/5300DDR2S4GP/
Good luck...

Can't connect to netgear wifi with macbook pro

I have a Netgear N900 router and although I can find the signal I cannot connect to the wifi. Each time I clicked on it, it would fail to connect and say to move closer to the router. However the router has already been upgraded to make the signal strong enough to reach my room. I have tried restarting the router and it has not worked. I have gone into the router through my browser and reserved an IP address and changed my network settings on my computer to "using DHCP with manual address" and entered the reserved IP address. I restarted my computer but now my macbook pro says that it is connected but I can't connect to the internet when i open a browser. I'm not sure if I'm not reserving the IP address correctly or if there is another solution to this problem. If anyone has encountered this problem and found a solution that would be amazing. I have been trying for a month now to fix this. Thanks!

From the menu bar, select
 ▹ System Preferences... ▹ Network ▹ Advanced ▹ TCP/IP
What values are shown for the following?
Configure IPv4
IPv4 Address
Subnet Mask
Router

How can I use airplay with Macbook Pro 9,2 Mid 2012/ Mac OSX Lion 10.7.5

What do I need to do to play Airplay on Apple TV from my computer. The option is not in my display setting, so, obviously, I do not have the capability. Do i need to upgrade my software?

You can't.
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer.

Can't get online with Macbook Pro

I have a Macbook Pro from 2009 and am having trouble connecting to my home network. The desktop PC has internet connection which is how I posted this message, so I am assuming that my home network or the router are not the problems.
The same problem occured for me earlier yesterday while I was at University but I just assumed that the network was slow on campus. It wasn't until I got hot and couldn't connect to my own network with my Macbook that I became suspicious.
Can anyone help me with this issue? I've disconnected the router in my basement and reconnected it to ensure it wasn't my network having problems. I've reset Safari and emptied my Cache to determine if that might help. I'm all out of ideas, if anyone has any troubleshooting tips I would greatly appreciate it.
My agreement for technical support with Apple expired and I would really like to avoid paying $50+ for a 30 day agreement for one problem. Thanks!

We'll need some more information.
When you try to connect what are you seeing?
When you go to Network Settings (System Preferences > Network) what does it report? Does Wi-Fi say Off or On? (This image is from an iMac connected via wire to the network but I wanted to give you an example of the screen). Does your Wi-Fi say Connected or off?
Do you see something similar in Wi-Fi as what I have shown below for Ethernet? Basically does your Wi-Fi in "Status" say "Connected. Wi-Fi is currently active and has the IP address xx.xx.xx.xx."? If it does not then you are not even seeing the Wi-Fi network.

How i can linking apple remote with macbook pro WRD

dear apple support agint
i have MacBook Pro Retina display and i want linked it with apple remot control
that my case
how i can make it ?
thank you
eng.Muhammad Ghunaim

Remotes don't sync. They pair with your BlueTooth.

Can't Eject CD with Macbook Pro

I'm having a bit of trouble with the eject feature in general on my MacBook. At first I noticed that I couldn't eject disk images or external drives attached to my computer, and now I realized that the eject button on my MacBook Pro keyboard doesn't even do anything. I try to eject a CD and nothing happens. The usual notification (eject icon) doesn't even pop up.
Any ideas as to what the problem might be? Using a third-party program (like Ejector) works fine, but I'd rather have the actual integrated features work.
I previously had an eject icon in my Menu Bar and got rid of it not too long ago. Did I perhaps disable it the wrong way? I don't remember exactly how I disabled it (whether a command in terminal, third-party program, through some Finder preference, etc.).
Any help would be great. Thanks!

Create the new admin account, log into it, and see if it works there. If so, then you're best bet is to delete the original, saving its data, recreate it using the same username/password combo, log into it, mount the saved data disk image in /Users/Deleted Users, and slowly move the plists back into the Preferences folder until you track down the conflicting ones or corrupted ones.

Can't pair 5S with MacBook Pro

When trying to pair the iphone 5S with the MacBook Pro, i'm told MacBook not supprted in this iphone. Worked fine with previous phone (4S).
Thanx,
Boe

Hi ddfaulk,
Thanks for using Apple Support Communities. This article has some steps you can try if you're unable to pair your iPhone 5s to your MacBook Pro over Bluetooth:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Cheers,
- Ari

HELP!!!! Can't do anything with MacBook Pro

MacBook Pro keeps booting from the Tech Tool Pro CD I was using to repair the volume structure on the hard drive. Problem is, I can't get it to boot from the repaired hard drive, because none of the startup keyboard commands work!!!
Holding down D doesn't boot from the hard drive
Holding down Option doesn't give me a choice of startup volumes
Holding down the eject key (or the mouse button) doesn't eject the disc
Holding Command-Option-P-R doesn't reset the RAM
Even plugging in an external USB keyboard and mouse and using these commands doesn't work. In each case, the computer re-boots from the Tech Tool Pro CD, which essentially renders the computer useless.
Does ANYONE have ANY ideas?

Try resetting your SMC.
Resetting the System Management Controller >>
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

Can't pair wiimote with macbook pro

Hi all, I'm trying to pair my wiimote (wii controller) with my macbook pro but i'm having problems. Basically i setup the wiimote to be discoverable, goto add new bt device from the mbp, it sees the wiimote, but keeps asking me to enter a passcode on my wiimote! I somehow need to tell the mbp to not need a passcode but cant find where to do that. any ideas?

sorry ignore me... found it! :P

Can bluetooth gps work with MacBook Pro?

If you have an iPhone, you have a gps and bluetooth. I'd like to get a MacBook Pro to sync with that geo locating capabilities, and/or with a Dual XGPS150. Anyone know a way to do this? Is it possible?

Thanks for the reply chattphotos. It just seems odd that Apple would not recognize this would be a useful feature for astronomers, geologists, photographers, and other professions that use geo-related laptop applications. Oh well.

Can connect to Snow with MacBook Pro but not G4

I have used my G4 with the airport for a long time. I recently got a MacBook Pro and it connects in fine to the ABS. Both worked connecting to the ABS for a few months. Suddenly, the G4 quit recognizing the ABS. Nothing I do allows it to find it. Could there have been a software update that caused this? There was a thunder storm, but no recognizable issues on the G4, everything seems to be fine...except it doesn't see the Airport.
Thanks in advance for any ideas.
Larry
G4 Mac OS X (10.3.9)

try unplugging your broadband modem and ABS for a short time and plug them back in.

Yamaha MOTIF ES8 Can't get working with Macbook Pro

I found this post but it's been archived and the person still couldn't get it working. http://discussions.apple.com/thread.jspa?threadID=1076838
I can't either, I hook up the Motif via USB and change it to USB and my Mac doesn't see the device under Audio Midi, such an expensive Keyboard and it's going to waste. Half the reason I got a mac was to use it with my keyboard, never thought I'd have so much trouble. I'm using the AMS but it never registers and Logic Pro never sees any device. Not that I know how to use Logic Pro.

Did you install the drivers?
Those: http://www.yamahasynth.com/download/ai/macai_v113e.zip
cheers
rob

My Wife's MacBook Pro not booting

Hi All,
I hope someone can help, My wife's macbook pro (bought early 2011) was suffering from split screen then freezing. I read online that it could be due to logicboard issues so I did the Apple Hardware Test (AHT) and it said everything was fine. So while opening final cut pro, the Mac froze and nothing was happening, so we had to do a hard shutdown (held down power button).
The next thing we know is, chimes, loading with Apple logo then grey screen. So recovery mode => loading screen with Apple logo and bar at bottom => Frozen blue screen.
I read some more online, did reset of PRAMand SMC. Did the Internet recovery. held "option" and selected recovery (now instead of showing Macintosh HD it shows "EFI boot")
There was no CD that came with the Mac so i cant even do a repair.
I am getting pretty desperate on what options are left, any other suggestions would be helpful.

KimoMansour,
since your wife’s MacBook Pro was bought in early 2011, it will have originally come from the factory with two grey model-specific installation DVDs. (Models that came from the factory with Lion or later didn’t come with grey installation DVDs in the box, but Lion wasn’t released until July 2011.) You can buy a replacement pair of these grey DVDs from Apple, but not through the online Apple store — you’ll need to call Apple to get the particular pair that her model needs; have her MacBook Pro’s serial number handy when you call. One of the grey DVDs has the original bootable version of Mac OS X for her model; the other one has the Apple Hardware Test and the iLife apps for her model.

Poster printing with MacBook Pro

How can one print posters with MacBook Pro? For example, 16 A4 pages to tape together.

I found system preferences but once I get there I
can't find the internet and network.
wait. in the System Preferences window, the third row down should be "Internet & Network"... the second icon from the left should be "Network".
are you saying you don't see the Network icon?
I clicked show
all and it doesn't add anything.
correct that's just a "return to the main menu"-type thingy - i.e. if you click on "Appearance" from System Preferences window, and then decide that you want to go back to the System Preferences main window, you'd just click on "Show All"
What am I missing?
I'm brand new to OS X.
well, i don't think you need Virtual PC... but i think we should first figure out why you're not able to get to the network setup section of system prefs....
cheers

Can't create wifi with macbook pro

Similar Messages

Maybe you are looking for