Can't Cut or Remove Frames

Whenever I select several frames and include all layers (80)
and try to delete, cut frames or remove frames, the spinning
beachball comes up and Flash shows as "Not Responding" in the Force
Quit dialog box. I have no alternative but to force quit the
application. I have trashed the "Flash p.list" but continue to
experience the same problems - Any ideas?
Thanks,
Steve

Thanks, I will try this when I get home today. However, the fact that the problem was not corrected when I made a new user makes me think that deleting this file from my user Library folder may not correct the problem. Any other suggestions if deleting the dock.plist file doesn't work?

Similar Messages

Can final cut pro x remove vocals on mp3?

I want to Karaoke 'Try' by Dolly Parton on Blue Smoke as there are no available karaokes of it commercially, so I want to remove the vocals on the song but keep the musical arrangement. Can Final Cut Pro X do that? Thanks, GoDeAn

I don't know anything that can do that. If you find one can you let us know?

How can I remove frames in the middle of a clip?

Seems Precision Editor should let me remove frams from the middle of an individual clip, but I can't figure out a way to do this.

What application are you using?

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove wires/rig? Are there any rig removal plugins for final cut pro? Thanks!

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove them? If not can anyone recomment any plugins for Final Cut Pro or Motion that can remove them. Thanks!!

In Motion 5 there is a plugin from CoreMelt called "SliceX" that does this. But I don't know anything in Motion 4 that will do it. You may get more help posting in the appropriate "Final Cut Studio" section of this forum.

Video cuts out of frame when importing to timeline :( What to do?

Hi there!
So I have my initial video on my timeline and all is well.
However when I try to import another video with the same frame, it looks like it zooms in because it cuts so much of the frame that I can't even see my face anymore . I even tried viewing it in the preview window on the upper left side (which looks fine) until I drag it in the timeline.
Photo 1 : This is the initial video
Photo 2: This is the additional clip that I'm adding that cuts out of frame
Something I should specify as well is, I recorded audio & video separately and merged them through he merge option that Premiere Pro has but that shouldn't be a problem since I did the same thing with my initial video to sync the audio and it did not cut out of frame.
I am still new at premiere pro and when I look up tutorials, no one seems to have that problem. Any help?
Thanks

How to remove frames in ISA B2B

Hi Everyone,
Our requirement is to change the looks and feels of the standard ISA B2B application drastically. To achieve the requested looks and feel, we may have to remove the frames, but at this point we are not sure if this is possible.
I would like to know if frames in B2B app can be removed? If Yes then, how easy or difficult it is to do that? What are the disadvantages of doing that?
Many thanks in advance,
Yoshi.

Hi Yoshi,
Remove frame/frames in ISA B2B is a standard requirement.
There are 2 main files from where you can control ISA Frames.
1. fs_start_inner.jsp
2. fs_startworkarea.jsp
You cannot remove frame from ISA B2B frame structure but you can hide frame.
Below is the example to hide "History Frame"
Open file fs_startworkarea.jsp.
Try to find below line.
<frameset cols="*,15,80" id="fourthFS" border="0" frameborder="0" framespacing="0">
Here 15 and 80 represent closer_history and _history frames. Suppose you want to hide these 2 frames from ISA B2B frame structur then change as below.
<frameset cols="*,0,0" id="fourthFS" border="0" frameborder="0" framespacing="0">
Now save "fa_startworkarea.jsp" and run ISA B2B you will not see closer History and History frames on right side.
Actually in ISA B2B we are not removing frames but we are hiding frames which is as good as removing frames.
Hiding frame will not create any problem in ISA B2B as you are not bracking any logic or process flow so do not worry.
Again remember we are not removing any frame from standard structure but we are just hiding it by making it "0"
I hope it will help you to achieve your goal.
eCommerce Developer.
Edited by: Ecommerce Developer on Jul 29, 2009 7:27 PM

Cut and Paste: Frame and Content Size Auto Changes

I'm working in InDesign CS2 and am having this reoccurring problem.
When I cut and paste frames with placed images (or pull images from a library) the frame and image will both expand to between 300%-3,000%. As you can imagine, it's very frustrating to have to create new frames and place new images every time. Any suggestions on how to fix or work around?

I'm still having problems with this, even using Paste and Match Style.
My table has three rows with gray background, then three rows of white; this pattern repeats for many rows. In the center row of each three rows is some text, while all other rows are blank. I want to move all this text down three rows, so that the text that was in the center row of the gray rows now is in the center row of the white rows, but I want the row colors to remain unchanged. Here's what I've tried.
If I "Cut" the selected cells, then the background colors are cut, so this is no good. Instead, I Copy the cells, then hit the Delete key. This leaves the background alone. Now I select a cell three rows down from the top. If I Paste, then the old backgrounds are pasted in, which is not the behavior I want. If I Paste and Match Style, then all the backgrounds are overwritten with white, except those single rows that originally contained both text, and had a gray background. The original cells that were gray but had no text are pasted in as white.
This latter behavior makes no sense to me. There seems to be a difference in how Paste and Match Style works, depending on whether the copied cells had text, or were blank.
Is there another way to do this rather common task—moving text around a table that has alternating-colored rows, without messing up those colors?

How can I cut up a video file into smaller bits?

I shot around 3 hrs of 1920x1080 AVCHD in 2 clips (a wide shot of the stage of a musical production I performed in) It all fits in the internal memory of my camera.
Two friends shot medium and closeups in Standard AVI with a view of making a DVD (2 disks)
They will be editing it in Premier Pro standard def.(a 3 camera production!)
When I convert my AVCHD to AVI SD, each of my 2 reduced clips is still too big to fit on one dvd disk as a data disk.
How can I cut each clip in half to fit on a total of 4 disks so I can send them the video?
If I make two AVCHD projects out of each clip in PE9 and share as DV, the quality is badly degraded. Near vertical lines become very jagged and the picture is much softer than if it had been originally shot in SD.
If I make a PE9 DV project and import the AVCHD instead, I get the red line and the picture once rendered is no better.
I have seen references to a lossless codec. Would this do the job in PE9 and how do I implement it?
The 4Media converter does a much better job of converting to SD but how can I cut the new file in half?

I would point out that Standard Def here in Australia(576) is 12% better vertical resolution that in USA(480).
So European & Aussie SD doesnt look quite so bad compared with full HD
In fact if you stand more than 4 metres from a 40" screen, most people cant see the difference between good SD and full HD.because the eye cant resolve such fine detail at that dustance even with perfect vision.
This is providing the original material was shot with a good camera capable of HD and it was downscaled properly.
Converters
I. downloaded trials of the following converters and rank them in the following order
1. 4Media version 6 AVCHD to AVI converter ($37)
2. Prism
3. AVS
4. Wondershare
5. PE9 making seperate SD projects
I found them obviously different with PE9 right at the bottom of the scale! I will never use it again to make a SD project.
Blurryness and jagged or twinkling diagonal lines were the most common faults.
4Media shone above all the others. When used on the highest bit rate was only slightly softer than the ACVHD material with no jagged diagonal lines but it produced an AVI file the same size as the AVCHD.
When I set the bit rate so the AVI file produced was half the original AVCHD, the quality was equal to original SD video Shot on my old Sony Camera that cost me $2000 5 years ago.
I can split the files with this program too!
Judging picture quality
All pictures will have errors and be less than ideal. It's just a matter of how many are acceptable.
The ONLY way to evaluate how good a picture is to view it on the best possible setup. You can't judge vertical resolution on an old CRT TV which is a different number of lines anyway (525 or 625) so evaluation is impossible. Digital TV thru a set top box to a CRT TV is far worse than the original analog.
Because everyone knows SD is worse then HD but it should only be half as bad (576 is about half of 1080)
Because I wear glasses that perfectly correct my focus and slight astigmatism, I have a good rough method of calibrating my eyes so I can relatively judge quality of different pictures on different systems.
I vary the difference between myself and the screen so the left and right edges are in line with my fingers inside the frames of my glasses!
This is equivalent to sitting two thirds from the screen in the average picture theatre where you can comfortably sit without being disturbed by deficiencies of most film and HD projection.
Applying this to my computer screen I can now judge pretty well. If a picture looks really good under these circumstamces it IS good and I can easily see any meaningfull errors.
Using my calibration "method", I found that full HD on my 40" LCD is noticeably sharper than the best cinema in our city (we have 39 of them, some with 8 theaters ) and after enquiries found they are all 1440x768 and not true HD at all.If you get there earlier than when they boot up their projector you can often see this in their boot up screen.
Worse still they slightly defocus them so you can see the pixel structure close up!
The now rare 35mm Film projection ranks even lower by the time copies are distributed.
You can't buy analog TVs or CRT screens anymore here anyway and Analog TV finishes here completely next year.

How can I cut and paste from a webpage to a Word document without the document taking me to the web address when I click on a word in the document?

How can I cut and paste from a webpage to a Word document without the document taking me to the web address when I click on a word in the document?

You are trying to copy a link, it is most likely in a different color such as the words "Microsoft's own forums" in his post. In Word highlight the word or words, control click on them, select Hyperlink, then Edit Hyperlink, then delete the link from the top box. It will then have a button asking if you want to "Remove Link", click on it.

I have marked some video cuts for removing, and want to activate them again and take away the marking (a red line over the thumbnails). How do I do that?

I have marked some video cuts for removing, and want to activate them again and take away the marking (a red line over the thumbnails). How do I do that?

In the middle tool bar, near the Reject Tool that you used to make the red marks, there should be an "Un-Mark" Tool. Select this tool and you can erase the red marks. It should look like an empty star.
YOu can select "View Rejected Only" to make sure you get them all.

Can't seem to delete frames in Flash movie.

Hi,
I'm very new to Flash. I've imported an .flv movie into a job, on the stage. I want to get rid of a lot of the first frames, about 180 of them. Why can't I delete them using a right-click and choosing "remove frames?" Nothing seems to go. The movie's still starting at the same place all the time.
Thanks,
Peter

I think you are right. That is what happens.You can't "edit" an FLV file this way. The frames are deleted, but that just means you won't see the end of your video!
Generally it isn't a good idea to import the video to the stage and play it back in this manner it can cause memory managment issues and other stuff.
It is usually a better idea to use either the playback component or your own code to dynamically "stream" the file.
Also if you want to edit out the first 180 frames you should open the source video, edit it, and re-export to a FLV.
If you can't do any of the "best practice" things. You could embed the FLV in a MovieClip say myMovie and then use code like:
myMovie.gotoAndPlay(181);
or whatever. But the file size will still include the 180 frames of content and there are likely to be other problems when looping and replaying and stuff like that.

How to remove Frame.BackStackDepth

Hi
I am developing a windows 8.1 app which includes several pages. I want to know how can I remove Frame.BackStackDepth so that when the user press the back button the app will navigate the control to the first page.
I tried this but its not working .
private void backButton_Click(object sender, RoutedEventArgs e)
this.Frame.BackStack.Remove(this.Frame.BackStackDepth);
this.Frame.GoBack();
samEE

Hi Sameel,
You can use following code to remove back-stack and go First Page
private void backButton_Click(object sender, RoutedEventArgs e)
{var rootFrame = (Window.Current.Content as Frame);
rootFrame.Navigate(typeof(FirstPage));
rootFrame.BackStack.Clear();
Don't
forget to mark the right answer and vote up if helps you.

Re: removing frames

> Are you trying to remove frames from Video file ?
In my FLA file I have a movieclip created by using
Insert---New
Symbol---movieclip
Then I import an AVI file onto the stage of that movieclip.
As a result I
have about 250 frames created in the movieclip timeline. Now
I wanted to
remove some of them

Yes, you appear to have found a "bug' or missing function of premiere cs5. (is it fixed in 5.5?)
My sony HVR-M25AU decks are fully capable of recording HDV 1080/24p signals from firewire and it is not working from premiere cs5. I created the adobe HDV 1080p24 sequence and tried export to tape and my deck flashes a big window saying "Invalid Input Format"
doh! lol as i just typed this i looked back at premiere to verify the sequence name and in the window for the preset description it says:
"Note; Export to tape is not supported in this editing mode"
O'well now that leaves us with - Hey adobe why cant $800 premiere do something so simple that sony vegas can?

Adobe premiere cutting between the frames

Hy there und hallo
English:
I'm working with Adobe Premiere and Adobe Encore. Sometimes the timehead is between the frames (between 2 single frames!!!). Actually that's not possible, but I'm not the only one with this problem. My co-worker had the same problem on a different computer. And Adobe Encore is not better in this way. Now, I have a project in Encore and i want to make the sequenz shorter. I can make it shorter with no problems, but the video gets cutted between the frames like in premier sometimes. I was looking for that problem in the internet, but i found nothing. Does anyone know how to shoot this prob? Thanks for every answer...
Deutsch:
Ich arbeite mit Adobe premiere und Adobe Encore. Ich hatte öfters das Problem, dass premiere zwischen den Frames den Timehead hinsetzt (Zwischen 2 einzelnen Frames). Das geht doch gar nicht. Ich bin nicht der einzige mit diesem Problem. Mein Mitarbeite hatte das selbe Problem an einer anderen Workstation. Adobe Encore ist auch nicht besser in dieser Hinsicht. Zur Zeit habe ich ein Projekt mit Encore. Wenn ich im Schnittfenster die Sequenz etwas verkürzen möchte, dann springt das Video nicht auf einzelne Frames, sondern dazwischen. Ich habe im Internet schon nach Lösungen gesucht und nichts gefunden. Kann mir jemand helfen? Für Antworten bin ich sehr dankbar.

with encore i always had 24 fps.
Yeah, but the Encore timeline assumes a 30 fps time base. Either your 24p original has the 3:2 pulldown it in already, making it truly 30 fps, or it has the appropriate flags inserted, which makes Encore treat it as 30 fps.
I don't think there's any way around that with Encore. It's just the nature of the NTSC beast.

So I have a file on my desktop and I cannot open it, move it to a folder, or delete it from my mac. I dont know what it has in it, and that makes me suspicious. What can I do to remove this unremovable file from my computer? Is it a virus?

So I have a file on my desktop and I cannot open it, move it to a folder, or delete it from my mac. I dont know what it has in it, and that makes me suspicious. What can I do to remove this unremovable file from my computer? Is it a virus?

First, I would recommend repairing the hard drive with Disk Utility.
If that doesn't fix the problem, there's a very dangerous command you can execute in the Terminal. This is very hazardous, because a simple typo can result in very drastic consequences. I have seen people erase their entire hard drive by putting a space in the wrong place! So, please follow the directions I'm going to give you very carefully!
Open the Terminal, which is found in the Utilities folder in the Applications folder. In the Terminal, enter the following:
sudo rm -f
Make sure to put a space after the "-f"! Then, drag the troublesome file from the Finder and drop it on the Terminal window. That should insert the path to the file in the command. Then go back to the Terminal and press return. You will be asked for your password, and when you type it, nothing will be shown as a security measure. Press return again after entering your password. The file should be deleted.

Can't Cut or Remove Frames

Similar Messages

Maybe you are looking for