Can't deactivate current software because of hard drive failure
Trying to reinstall Acrobat 7 Pro, but can't activate, error message, exceeded number of attempts. Have original disk and serial number but can't enter it. Phone Registration is no longer available Any help? Frank
Hi Francis ,
I have checked from my end that there are sufficient activations left .
Could you please share the serial number with us so that we can check at our end.
I am sending you a private message.
Regards
Sukrit Dhingra
Similar Messages
-
I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.
If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
Install from scratch and apply all updates manually.
Please do a forum search. I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
Bottom line: the Adobe auto updater is utterly useless in CS5 and prior versions. You need to download the updates and apply them manually yourself.
I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify. -
How do I restore my computer's software after a hard drive failure? No back-up. No disk.
My hard drive on my MacBook quit working. I didn't have a back-up. I sent it to a data recovery company with instructions to recover the photos only. I bought a new hard drive and installed it, only to realize that I don't have any way to get back the operating system or the other software that came with it. Do I need to bring it in to have a genius do it, or can they send me a disk? How much will it likely cost? Why didn't I get a backup disk in the first place? Any help is appreciated.
ThanksIf you call AppleCare they will be more than willing to help you. Use the appropriate phone number on this page. Tell them you need a support related fulfillment - replacement disks. As shldr says there will be a small charge, but you will be able to install your system again.
Best of luck. -
I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?
Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.
-
Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/ -
I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.
I have that problem too. There's many other discussion threads as well. Either Apple doesn't realize they have a problem, or they do and simply don't care. Either way, not good.
There is a workaround that I'm going to try next. Go to this webpage:
http://support.apple.com/kb/HT5634
Scroll down to the middle of the webpage. Hit "Expand All". Now, search the webpage for the Apple product name of your computer. It should be something like "MacBook Pro, 17-inch, Early 2008". If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit). Hopefully you'll find a "4" or "5" there. Click on that number, to go to the download page for the drivers that you need. If you just see an empty box there, then you're out of luck....
Hopefully there will be drivers. Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32). Use Disk Utility to format your USB stick if necessary. Now, you have the drivers you should have gotten from the Boot Camp Assistant download. You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
Hope it works!
Josh -
I use a Macbook Pro 13" mid 2010 on Mavericks and I've tried using the Boot Camp assistant to download support software for Windows 7. This gives the error "Can't install the software because it is not currently available from the Software Update server."
Further, I tried to separately download Boot Camp 4 and 5. When I do this and try to install from Windows 7, it says that this version of Boot Camp is not for this computer and doesn't install. The result is that I have Windows 7 working and installed, but am unable to use the trackpad to rightclick, brightness settings, etc.
Please help!
ThanksYou need to run Bootcamp Assistant and select only the menu item to download the Windows Support Software. Follow the instructions. The download servers are extremely slow therefore it may take several hours to get the download.
-
Trying to add Windows 7 with boot camp to a Macbook Pro
HI
while i download windows support
that time this message comeing"can't install the software because it is not currently available from the software update server. boot camp"
i can't use apple keyboard and multi touch keyboard in windows.
pls help me -
hi there i was trying to install windows via bootcamp and when i was trying to download the support software i had an error of "Can't install the software because it is not currently available from the Software Update server." i am using a 15" 2009 macbook pro and the bootcamp version is 5.1.0 (473). can anyone help? thanks in advanced
Instead of downloading the Windows support software from Boot Camp Assistant, download it from the Apple website. Mid 2009 and older MacBooks Pro only support this Windows support software version > http://support.apple.com/kb/DL1630 This version allows you to install a 32-bit or 64-bit Windows 7 version.
Follow Apple's steps to install Windows on your computer > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf -
Error: Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.
OS 10.9.1
iMac 27-inch, Late 2009
Boot Camp Assistant Version 5.1.0 (473)
Every time I run this I get the above error after I hit "Continue" on the "Save Windows Support Software" page and subsequently hit "Download Windows 7 Support Software."
How do I successfully install 64 bit WIndows 7 on my iMac?
Thank you!Waited a month and tried again with the same result. What gives? Does Apple no longer support Bootcamp with Windows 7? Do they not read these posts and help out customers? If Apple doesn't care and won't help, can anyone else suggest something? My large company does not like Apple and barely supports those of us who buck the trend and buy Macs. If I have to buy a PC to support their software to work from home this only gives them more "ammunition" to decline to support Macs. Any advice anyone can give would be greatly appreciated!
-
Can't install the software because it is not currently available from the Software Update server...what does this mean? I'm trying to install windows 8.1 on my early 2009 iMac. I double check with telephone support to make sure I am able.
Assuming you are referring to the Windows Support software, normally it means the download server is busy or off line. If you know what version of the support software you need you can get it here: http://www.apple.com/support/bootcamp/downloads/
But in your case since you have an early 2009 iMac, your computer does not support Windows 8.1. See this table from: http://support.apple.com/kb/HT5634
iMac (24-inch, Early 2009)
4
DVD
DVD
iMac (20-inch, Early 2009)
4
DVD
DVD -
can't install the software because it is not currently available from the software update server. boot camp
HI
while i download windows support
that time this message comeing"can't install the software because it is not currently available from the software update server. boot camp"
i can't use apple keyboard and multi touch keyboard in windows.
pls help me -
Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server. Please help.
Installing an HP network printer
-
I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help
It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me. -
Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,HP Print Drivers
Maybe you are looking for
-
How to connect my MacBook air to my iphone?
I want to connect my MacBook Air to my iPhone (AT&T).
-
Problems accessing parameters within repeating frames.
I hope this is a more readable version of the problem I just submitted. This is the overall layout of a report I am currently working on and having problems with, using Oracle Reports 6i. Departments Commitments Obligations Dept 1 - Dept 1 Title RCC
-
Any way to export an outline, preserving its hierarchical structure?
In an AppleWorks word processing document, outline labels seem to be stored separately from the text. When I "Save As" text, the result does not contain either labels or indentation. Similarly, Edit/Copy copies the text without the labels. Is ther
-
Can't save a file because of "a program error"
PSE 8 doesnt' save files with error "Could not complete your request because of a program error". when PC is restarted PSE does save one or two files and then the error appears... looks very ugly, such a basic fiture is not working
-
How can I display previous monthname including the year?
I have the following sql statement: SELECT Cast(datename(month, dateadd(mm, -1, getdate())) as varchar(15)) + '-' + Cast((DATEPART(YYYY,GETDATE())) As CHAR(4)) The result displays as July-2014 which is correct for previous month... But on next year J