Can't define PVE Uplink with srw224g4

Hi,
I tried to setup sample usage of PVE with Linksys SRW224G4 withot success. I successfully set PVE g1 for ports 1 to 5 but I can't setup uplink port for this PVE group. I can't find place where can define PVE mapping an PVE upllink in web view. When I googled about this I find that in "Port config" section in firmware version befor 1.2.2 have "pve mapping", but there is not such link. How can i define Uplink for particular PVE group in firmware version before 1.2.2?
Thanks in advance

Huh,
Even though i am using older software here, it seems straight forward.
Can I humbly suggest, that you contact the SBSC to get some phone help, if this switch is still under phone support warranty.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
regards Dave

Similar Messages

Can we define a trriger with sql to GML automaticly ?

hello,
i just need to know if we can define a trriger with sql to GML ?
thanks,
best regards ,
lama
Edited by: user11255382 on 25 juin 2009 12:18

Yes, a trigger can be written to convert sdo_geometry to GML using SDO_UTIL.TO_GMLGEOMETRY.

Can I define an RFC with multiple desitinations?

I am working on intergration between SAP and JAVA, I am have to call RFC to get the pricing of a each lineitem from Java instead of getting from SAP Condition types while creating as Sales order. I have defined one RFC to connect to Java server program. I have called that in Exit routine of that condition value.This should happened online as soon as you creat a sales order you have to get the relavant price of each material.I can able to get the things .I need to test the performance of this if data is huge. I need some help regaring this.
Can I call multiple RFC destinations to connect the Java server program if it is excecuted as clusters or different severs .

I had a similar requirement. They want to call different RFC destinations in different systems. So, I created a table with System and Logical destination to be called from that system.
In my code, I check the current system and get the logical destination to be passed while calling function module. You can also use similar logic if you want to call different systems.
Chakri.

How can I define a tooltip with multiline user input?

I've created a button with app.response to get user input for defining a textbox's tooltip, but for my purposes I need multi-line text formatting within the tooltip, such as the \n character. How can I accomplish this? Thanks.

How do you mean? I've not been able to find any real settings for the tooltip under properties. A long enough line of text wraps around, but I want it to contain some actual formatting, for ease of reading. One long paragraph, followed by a few individual bullet points of info. For example:
Blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah.
Blah: blah blah blah blah blah blah blah blah blah blah blah blah
Blah: blah blah blah blah blah blah blah blah blah blah blah blah
Blah: blah blah blah blah blah blah blah blah blah blah blah blah
Is that at all possible with the built in tooltip?

Defining constants/enums with const in JavaScript

Hi folks,
I like to define constant enums like the InDesign DOM already provides, e.g.:
SpecialCharacters.FORCED_LINE_BREAK
StateTypes.DOWN
etc.
I like to define such enums too. The only approach I found was:
const MY_ENUM = {TOP:"top",DOWN:"down"}
But this is not write-safe. I can add properties/functions to MY_ENUM as well as change the value of TOP. Thats not desirable.
Whereas the InDesign DOM enums are readonly. The enum object as well as the value/property. How can I define such type with JavaScript?
Thanks for your comments
Cheers Tino

Alternatively, it is sufficient if you create an output terminal named CO in this case. No need to connect it, of course.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
FormulaNode.gif ‏3 KB

How can I crate a view with tables which require "Left outer join"?

Hi guys,
how can I define a view with tables which require "Left outer join"?. In SE11 "View",->tab "Join condition", it seems that it valid only for "Inner Join".
Please give me some hint.
Thanks in advance.
Regards,
Liying

Hi
Inner Join and Outer Join
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join.
With an inner join, you only get the records of the cross-product for which there is an entry in all tables used in the view.
With an outer join, records are also selected for which there is no entry in some of the tables used in the view. (ABAP allows left outer join.)
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join.

I have a 1st generation Time Capsule with current firmware. Can I define the time periods when my children's devices have access to the wi-fi network?

I have a 1st generation Time Capsule with current firmware. Can I define the time periods when my children's devices have access to the wi-fi network?

Can I define the time periods when my children's devices have access to the wi-fi network?
Yes, using the Timed Access feature in AirPort Utility, you can setup specific rules for each wireless device which define the exact timeframe each day that the device will be allowed to connect to the wireless network.
Example....junior's iPhone can connect.....
Everyday......Between.....9 AM and 10:00 PM
or
Weekdays.......Between......4 PM and 9 PM
and Weekends.....Between......9 AM and 11 PM
At the same time, your own personal devices will have Unlimited Access at all times.

How can i define a boolean variable with the condition if i got a specific text on a selected column?

How can i define a boolean variable with the condition if i got a specific text on a selected column?
Example:
my select results:
[id = 102] [Company = 'Microsoft']
If i got microsoft in 'Company' i want to my another table with the columnName "Microsoft" get "true".
Can you help me?

That is called 2-table UPDATE.
Example:
http://www.sqlusa.com/bestpractices2005/updatewithcorrelatedsubquery/
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How can I settle invoicing plan with defining withholding TAX Parameter

Dear All
         Please kindly help me to answer this question, How can I settle invoicing plan with defining withholding TAX Parameter.
I've already create PO Framework Order by specify Invoicing Plan Periodic automatic settlement.
        But, We can found with holding tax parameter on the tab of invoicing plan in PO.
       Please help me.

Hi,
From my understandinging in case of withholding tax there is no provision to manage from procurement side.
At the time of MIRO or payment run users have to select the applicable
withholding tax code ( During MIRO withholding tax pop up will appear).
Withholding tax is a component within FI: FI-AP-AP-Q
Regards,
Edit

Is it possible to make master pages with several title in one file? & Can I define page range from

Is it possible to make master pages with several title in one file? & Can I define page range from which page to which should be specific title?

While the number of master pages is not unlimited, you can have quite a few in any file. I've never seen the limit documented, but it's in the hundreds, or more likely thousands. There is, I believe, a page limit of 9999 pages per document, but I don't know if that includes the masters or if they are counted separately.
You can choose a page range in the Pages panel, then assign a master to them manually, and I beleive there are some scripts floating around that can assign a master page based on the appearance of a paragraph style (for chapter start pages, for example).

Can I define simple Developer 6i reports with XML?

Hi,
this may sound far fetched, but can I define report definitions
in XML and convert it to RDF?
My RDFs would have simple layout - one record of a table on of
page, in form layout. It would be much easier - and this way I
could redefine it any time - than to user the report wizard in
Developer 6i.
TIA,
Tamas Szecsy

Yes you can. You should look up the STYPE parameter of
rwcon60.exe which one of its possible values is XML and as your
DTYPE use the PDF. The report builders help has covered the
details on this.
Good luck,
--PAYAM
Hi,
this may sound far fetched, but can I define report definitions
in XML and convert it to RDF?
My RDFs would have simple layout - one record of a table on of
page, in form layout. It would be much easier - and this way I
could redefine it any time - than to user the report wizard in
Developer 6i.
TIA,
Tamas Szecsy

Can I create a User with Root Privileges but without UID Zero?

Dear all,
I'm working on this project and this is the task required: Create a user and let this user perform all that the ROOT user can perform but shouldn't have UID 0. I'm sincerely new to this task but I challenged myself and made so many search on Google and this is what I was able to do.
1. I created a user --- testuser1
2. I created a role --- advrole
3. I added the Solaris predefined profile -- Primary Administrator Profile to the role advrole and added this role to the user testuser1.
4. I logged out from root and login with the newly created user i.e. testuser1.
5. I ran the command id and the user - testuser1 still has its UID defined by me when I was creating the user account (which is good as far as my task is concern).
6. In order to perform ROOT tasks when logged in with testuser1, I use su - advrole.
7. I can now do all that ROOT can do but whenever I run the id command, the advrole shows UID 0 (WHICH IS BAD FOR ME AS PER MY TASK).
My question is, I need to tell the customer that what they actually want isn't feasible in Solaris and the above is closer to what they want but I need to be sure if it's feasible or not before telling my customer?
Can anyone tell me if it's feasible and if so, how can it be done? Or if the way I did it is the only way, kindly let me know as well so that I can get back to them with a valid and concrete explanation.
P. S. The customer requires this because when doing auditing, their auditing software tracks users based on UID so therefore if every user will login and su - root, all will appear as done by the ROOT user because of the UID and a particular will not be held responsible.

If you use auditreduce and praudit, you can get the information you need. It will show, as in my example below, that I logged in via SSH, and then switched to root after logging in. This information can be easily scripted and I do so every day in my daily report so I can see who logged in and who switched to root.
Logging in via ssh:
header,69,2,login - ssh,,MYSYSTEM,2010-06-03 09:15:15.151 -07:00
subject,myusername,myusername,mygroup,myusername,mygroup,11435,512647774,15097 65558 MyIP
return,success,0Then switching to root:
header,94,2,su,,MYSYSTEM,2010-06-03 09:15:21.100 -07:00
subject,myusername,root,mygroup,myusername,mygroup,11448,512647774,15097 65558 MyIP
text,success for user root
return,success,0It also indicates the session ID for the SSH session, so I can monitor when that session ended too.
A different session logging in and out via SSH -
header,69,2,login - ssh,,MYSYSTEM,2010-06-03 09:16:19.380 -07:00
subject,myusername,myusername,mygroup,myusername,mygroup,11451,3474846213,15097 131094 MyIP
return,success,0
header,69,2,logout,,MYSYSTEM,2010-06-03 09:16:51.452 -07:00
subject,myusername,myusername,mygroup,myusername,mygroup,11451,3474846213,15097 131094 MyIP
return,success,0

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Help in defining organization structure with reference to new gl

Hi Experts,
I need some help in defining organization structure with reference to new GL. I have three legal entities spread across 17 locations. In each location there may be three legal company entities in operation. And in each company code there are 5 to 6 several product lines. I have defined 3 legal entities as 3 company codes, but my concern is how do i define these 17 locations as and how do i define these product lines. We do location wise reporting meaning if i take one location i draw P&L for all the 15 product lines of the combined 3 company codes. Like wise for we do individual location wise reporting. As ususal we do budgeting location wise for departments for each individual company code.
I thought of using business area as locations, but i heard SAP doesnt support anymore on business due to new gl concept and moreover business area doesnt populate in all transactions. Can we use new gl concept like segments and so, i am sorry i am very new to New gl. Can the location wise combined reporting be done in consolidation or it can achieved in new gl
Can somebody share their expertise on how to achieve this either my new gl or traditional gl.
Thanks in advance
Best Regards,
gj

Hi Experts,
Looking forward some help on this issue.
Best Regards,
gj

Can't tab into flash with FF3?

I have to be missing something here, because this seems too
obvious a bug to be real...
So here's what I do...
1- Create a flash file with a couple of buttons in it.
2- Set the tab order of the buttons to 1,2,3...
3- Publish the swf and associated html page.
4- Open page in IE and hit tab a bunch of times, and you'll
see the tab go through the browser, and then through the flash
movie, highlighting the buttons in the swf with yellow boxes.
Now, open the same html page in FF3, and start tabbing. You
tab through the browser, and the swf in FF3 never receives focus,
and the buttons are never tabbed to. I keep telling myself that I
have to be doing something wrong here, because this is a basic
functionality. Any ideas? Hidden "make this work in FF" checkbox?
I'm running XP and FF3 3.06 and the flash plugin version
10,0,22,87
Here's a screen-capture that shows exactly what I'm talking
about:
http://www.joefreelance.com/FF3_Demo/ff3.html
Joe

I think we're talking about different things.
If I have an html page that has a flash movie on it, and if
that flash movie has properly defined buttons, you should be able
to tab through it without doing anything with the mouse.
We're not talking about newly loaded pages, nor are we
talking about windows.
We're talking about tabbing, right?
So my thing is this:
In IE, embedded swfs are nice and accessible with the
keyboard only. Why aren't they accessible with FF? (I totally think
it must be something on my end, because there's no way that Adobe
would release a player that isn't accessible to people just using
the keyboard.)
I know it's possible 'cause if you look at youtube in FF, you
can tab through the swf with no mouse "activation" needed at all...
Strange.

Can't define PVE Uplink with srw224g4

Similar Messages

Maybe you are looking for