Can't define user profiles

Hi Gurus,
I installed bw3.5 in testing environment successfully, and also I done client copy from 000 to 003, the problem is when I created new user in client 003, there is no any profiles I can define, such as SAP_ALL, SAP_NEW etc. but I can define it in client 000. any step am I missing?
I would really appreciate for this help. Thanks.
Min

The data copied in a client copy process is determined by the copy profile. Following are some values:
SAP_ALL    All Client-Specific Data w/o Change Documents
SAP_APPL   Customizing and Application Data w/o Change Docs
SAP_APPX   SAP_APPL w/o Authorization Profiles and Roles
SAP_CUST   Customizing
SAP_CUSV   Customizing and User Variants
SAP_CUSX   Customizing w/o Authorization Profiles and Roles
SAP_PROF   Only Authorization Profiles and Roles
SAP_UCSV   Customizing, User Master Records and User Variants
SAP_UCUS   Customizing and User Master Records
SAP_UONL   User Without Authorization Profiles and Roles
SAP_USER   User Master Records and Authorization Profiles
Since you are doing a copy of reference client it is good to use SAP_ALL profile.

Similar Messages

Can we define users for both studio and integrator server

Can someone please let me know how can we define users for both studio and integrator server so that the user can be used to view UI page but not modify it.I want to define user in studio which will access the Page but not modify it. And the user in integrator server should be able to view scheduled jobs.
Thanks a lot.
Regards,
Amrit

Amrit,
Both Studio and Integrator Server support LDAP. See http://docs.oracle.com/cd/E35976_01/studio.240/eid_studio_users/toc.htm#Integrating%20with%20an%20LDAP%20System%20to%20Manage%20Users for details about implementing LDAP in Studio. For Integrator Server, see "LDAP Authentication", p. 38 (document pagination; p. 44 pdf file pagination) in the Integrator Server Guide (http://docs.oracle.com/cd/E35976_01/integrator.240/DataIntegratorServer.pdf).
RLJII

Resource assignment WMS- Defining user profiles and equipment profile

Can anyone please let me know how I can define the user profiles and equipment profiles in SAP WMS We have a decentralized WMS that we are implementiing . Can any one please let me know how I can define the user profiles and aalso the equipemtn profiles. Ability to skip tasks and task groups.
Thanks

Yes - this was the first set of information the OP dumped from his system. About line 5 of the post.
But I do wonder whether the 9.2.0.6 (not latest patch) makes a difference? Or perhaps the connect time is being used as part of a composite limit.

Firefox V33.0 can't find user profile and cant view window content

Hello
I have used Firefox since the old days, wayyy back. Never an issue, always worked, always performed.
My Firefox (v32 I believe), automatically downloaded and applied the v33 browser and immediately, everything went wrong...
First, the browser loaded but the screen was either sheet black or sheet white, then reloading (after closing the window) was informed (only via the window title as all else was block black) that Firefox couldn't see a user profile.
I loaded FF with safe mode and disabled everything (list of addons at the bottom of this post), and the browser loads now and I can see content, but then after only a minute in "safe mode" firefox persistently returned with either a fatal crash or a sudden inability to find the user profile (causing exit).
Reading up about possible workarounds, I eventually managed to export the Profile data (to desktop), to clear the profile data and replace data with desktop copy. Clearing the data took several attempts due to firefox display only showing black or white as stated above, but firefox then couldn't "import" profile as I can't see whats going on in the window.
Eventually manually installed profile data (from desktop automatic copy) to firefox but FF still persisted in crashing to desktop and not displaying correctly if not in Safe mode. I eventually uninstalled firefox and reinstalled from scratch. The reinstall persisted with all the above mentioned issues, I did manually reinstate the FF user profile and crashing to desktop is now rare but does still happen, now it usually happens when Firefox is not the current active window.
Firefox still does not display correctly unless in the "Safe Mode".
Any clues or help or suggestion about why this would happen? Any way I can revert to version 32?
My Addons :
No Services.
Appearance, default only
PLUGINS:
VLC plugin 2.1.3.0
Silverlight plugin 5.1.3
shockwave flash 15.0.0
Quicktime plugin 7.7.5
Java platform SE7 U67 10.
Google Update (disabled)
Adobe Acrobat 11.0.9
EXTENSIONS:
British Dictionary (not compatible with v33!!, disabled)
Colorzilla 2.8.1
cssUpdater 0.5.2 (disabled)
Dust-Me Selector [for CSS] 4.1
Firebug 2.0.3 (and associated FireDiff, FirePHP, EventBug)
enabling / disabling all/any of these does not (so far) change the graphical fault loading Firefox outside of Safe Mode.
Any ideas?
cheers
P.S>As additional info: I have tried the "reset firefox" but this caused numerous little bugs with saving the profile user data. Also reseting did not fix any of the issues.
Everything else on my computer works fine. No virus, no malware (Eset / MWBytes) all other programs fine, and FF was fine until V33!!

Hi for the crashes that are continuing, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

Can I create User profile service sync connection for my site without Active directory?

Hi everyone,
Is it possible to use my site without active directory? our AD policy don't allow farm account to have "Replicating directory changes", If I export AD information to SQL and sync profile from SQL is it possible?
Thanks
TanaponP

Yes, you can use mysites without setting up user profile sync. But you won't be able to sync information from SQL without having a primary sync setup with AD first. Syncing to something like SQL is designed to augment existing profiles. It
won't create new ones.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Can I change user profile of an IPOD but keep all of the music and information stored on it?

A friend updated my IPOD with all of their music with their profile. However, I would like to make changes but keep most of the music that was uploaded. Can I change the user profile (username and password) of an IPOD but keep all of the music and information stored on it?

Your frend does not have the right/lience to give the music to you. You should delete that music.
If he set up the iPod with his iTunes account you should restore the iPod from a backup of the iPod that should be on your computer. That will delete his music but restore your settings.

Cross Farm: User Profile Custom Properties do not show up in the consumer farm web applications

I have a two SharePoint 2010 farms, one is the publishing farm and user profile service is running on this farm. I have defined a couple of new custom properties, and after a while these custom properties do not show up at the consumer farm end.
So, on the publishing farm, I can udpate the user profiles with values in these custom properties. However, neither the custom properties nor the values got synchronized to the consumer farm. What puzzled me further is that some of the existing custom properties
exist on the consumer farm, but not the new custom properties I recently added.
1. I have made sure the application pool accounts on both the farms being added to the administrators with full control permission in UPS on the publishing farm.
2. The User Profile Service proxy (connected to the publishing farm UPS application) is associated with all the web applications on the consumer farm.
3. When values in the user profiles on the publishing farm changed, these changes do not get replicated to the consuming farm user profiles. This symptom occurs on both custom and OOB user profile properties.
However, I cannot find any other related information on the web, nor from the ULS logs.

Hi,
As I understand, it did not display the new custom properties you defined in the publishing farm at the consumer farm end.
1. Check if the topology Discovery Service Application runs well in consuming farm. In the Central Administration, it is the Application Discovery and load Balancer Service Application, check if it starts.
In the IIS, it is the topology, check if it starts.
2. Check the permissions have been established if you have established consumer farm permissions on Provider Farm before you publish the service application.
1. Go to Central Administration and going to “Manage Service Applications”.
2. Click on “Application Discovery and Load Balancer Service Application” and click “Permissions” from the ribbon.
Your farm GUID should be listed with full permissions.
The article is about Shared Service Architecture in a multi farm environment
http://blogs.msdn.com/b/russmax/archive/2010/05/06/sharepoint-2010-shared-service-architecture-part-2.aspx
Best regards
Sara Fan
TechNet Community Support

Assign User Profiles and Web Interface Transactions to Users

Hi EM Gurus,
Has anyone worked with not standard scenarios in SCEM?
They are working well but I can't access them on interface web.
In selection page (search page after logon), where choose tracking scenarios, only standard scenarios appear although I have assigned both scenarios to the user and made same configuration; Assigned and Defined Web Interface Transactions, Configured Fields for User Profiles, Defined User Profiles, Assigned User Profiles and Web Interface Transactions to Users.
But only Standard Scenarios appear as choice of tracking scenarios that are displayed to the user as a dropdown box on the selection screen after logging on to the Web interface.
Has anyone accessed not standard scenarios on interface web??
Help, please!
Thanks a lot.
Rodrigo Freitas

Hello Rodrigo,
if you have assigned the scenarios to your user in transaction /SAPTRX/UCUSER you must go to the admin page and reload the profile manager.
/admin in the URL of the WCL instead /ehsearch.
Afterwards you should see them also in the drop-down box.
Best regards,
Steffen

User Profile Pictures not deleting / replacing

Hello,
I have been struggling with this issue for a couple of weeks and think I may need some help. I have a user profile sync application which works fine, it syncs several attributes from AD into SharePoint, it also exports user profile pictures back to
AD for Exchange and Lync to use, this all works fine.
I was asked to replace a picture for a user, which I did using the 'Manage User Profiles' page in Central Admin. I didn't realise there was an issue until I was asked again a week later, it seems the update had not worked. I tried again, and
lo and behold the picture managed to revert back to the old one again.
After a lot of messing around deleting the picture, syncing, adding the new picture, syncing again etc I could not get the new picture to stay, the old one kept coming back. I do not think the issue is related to the sync, but more with SharePoint itself,
here is a symptom I believe is related:-
I delete a user's picture from 'Manage User Profiles', the picture is gone and the user's mysite page shows the placeholder pic.
Looking in the mysites site collection in User%20Photos/Forms/AllItems.aspx the 3 pictures for the user have disappeared. However if I browse to the url of the picture - User%20Photos/Profile%20Pictures/*username*_SThumb.jpg (or mthumb or lthumb) the
picture appears in my browser.
Next if I add a new picture for the same user through central admin, I then see the new picture in their mysite, I can also see 3 thumbnails of the user's photo under the mysites site collection in User%20Photos/Forms/AllItems.aspx
So far so good, however, if I browse to the url of the picture (including the filename as above) then I am shown the old picture :S
So it appears that the pictures in User%20Photos/Profile%20Pictures/_w and User%20Photos/Profile%20Pictures/_t are updating with the new picture, but the pictures in User%20Photos/Profile%20Pictures/ do not get updated, or even deleted properly when they
are removed.
Hope somebody can shed some light on this as it's really annoying me now! Thanks :)

Hi,
According to your post, my understanding is that the replacing picture not work properly in MySite.
I tried to reproduce the issue in my environment(SharePoint server 2013+SP1), it works without any issue.
Did the issue occur for all the users?
To narrow down whether the issue is related to the User Profile service, you can use other accounts to check whether it works.
If that is the case, you can recreate the user profile service application to check whether it works.
If your environment does not install any updates, you can install SP1 or latest update to check whether it works.
You can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

The User profile synchronization Full , runs for 1 second successfully

Hi!
On our sharepoint 2013 farm we can run the user profile incremental synchronzation timer job without issues, it runs for about 2-3 min.
However when trying to run a Full import, we observe that the full user profile synchhronization job only runs for a second and is finished. There must be something wrong..
The user profile service and synchronzation service are up and running. The connections to Active directory are present and working (incremental synchronization works).
Have anyone experienced this?
brgs
Bjorn

Hello Bjorn,
You should not run Full incremental until anything on UPA is broken. It should be only ran in case of disaster and recovery.
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

MySites User Profiles and User Hidden List

I would like to automatically activate all user profiles so I can assign an administrator to update all user information. The environment does have MySites setup but no one has permissions to create their own MySite site. Therefore,
when a user navigates to their profile page to edit their profile information they visit the URL http://server/MySiteSiteCollection/_layouts/15/start.aspx#/Person.aspx?accountname=domain\user
Right now, the administrator can only edit user profiles where the user had previously visited their user profile page, thus activating their user profile, which I assume adds an item to the hidden user list. However, the administrator cannot edit
any user profiles where the user had not yet visited their user profile site, thus generating an error. I would like to enable/activate all user profiles automatically without having to contact each user separately and asking them to visit their
profile page just to get it enabled for editing.
Does anyone know if there is a way via PowerShell to activate all user profiles?
Environment: SharePoint 2013

That is probably the best, most consistent way. It would be isolated to that particular SA, so there shouldn't be security concerns. Otherwise you'll constantly run into this issue.
This should work with SharePoint 2013:
http://blog.bugrapostaci.com/2011/10/03/create-all-users-personal-site-via-powershell-script-sharepoint-2010/
But you'd need to continually run it to capture new users.
Another one specifically for 2013 if the above doesn't work:
http://www.getinthesky.com/2014/04/powershell-create-mysites-users/
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to define a profile

I need to define Password limits using an Oracle Profile.
Can I define a profile using SqlDeveloper Data Modeler 3.0?

Hi,
No. I'm afraid Data Modeler does not support the definition of Oracle Profiles.
David

User profile is not avaliable on the first request to portal.

Hi, I am having a problem with anonymous user profile.
When user come to our portal for the first time:
1) In desktop backing file we will initialize it's anonymous profile.
ProfileWrapper userProfile = SessionHelper.getProfile(SessionHelper.getSession(request, true));
userProfile.setProperty("UserProperties", "user-region-name", "Germany");
2) The in Java Page Flow action I could read or change this value, but in the following forwarded .jsp page
I read only NULL values.
In the JSP I tried to read it by scriptlet, tags.
<%
ProfileWrapper userProfile = SessionHelper.getProfile(session);
String segmentJ = ((String) userProfile.getProperty("UserProperties", "user-region-name"));
System.out.println("JSP CODE:"+segmentJ);
%>
JSP CODE: [<%=segmentJ%>]
<profile:getProperty propertyName="user-region-name" propertySet="UserProperties" id="segment"/>
ruser-region-namee : <c:out value="${segment}"/><br>
But in the both situations I read only NULL values.
In the next request(F5) all values are accessible.
Please adivice how can I read user profile or deal with it in correct way?
P.S At the same moment I couldn't read user profile in the Struts portlet at all. :(
Thanks

Hi
Couple of things.
1. Try using this below API to get ProfileWrapper and see if that helps. This is what I use on my side after login action, and I could get user profile details.
ProfileWrapper aProfileWrapper = ProfileFactory.getProfile(loginId, null);
http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14255/index.html
2. Now, in the backing file, you are setting some properties. Which lifecycle methods are you setting them in. Like in handlePostBack or preRender. For time being, set them in both these methods and add proper System.out.printlns to observer which method is actually getting invoked. handlePostback gets called only when we move across tabs, as per my observation so far. So I set them or get them in preRender method.
Thanks
Ravi Jegga

How to set which User Profile attribute is used for email messages?

I am having a problem setting up User Profiles in SharePoint 2013. I have users that are both (1) Active Directory users authenticated using Windows Authentication, and (2) Active Directory users, existing in another distinct OU, authenticated via ADFS (active
directory federation services).
My problem is with the ADFS users. I want to have the users unique id be their logon email account ([email protected]), but want to populate their work email attribute with their "actual" or real email account.
If I have an OU (External Users) and within that OU (XYZ Company Users), AND my domain is contoso.com, then I want to add a user such that they have a unique id in active directory ([email protected], but want their email address to be whatever
it is (I.e. [email protected]).
MY PROBLEM: I can setup the User Profile Synchronization service to map the properties perfectly, but when I I try to add/share a user in a SharePoint site, the user's account email ([email protected] is sent the message, not their "Work Email"
([email protected]).
QUESTION: How do I get SharePoint to use the "Work Email" attribute (NOT the account email) of a User Profile when sending email messages?

Okay, within Active Directory, the user's email IS set to
[email protected] The "unique value" (Using the account logon name) works just fine. The problem is SharePoint. When I logon with another account and choose to share a site with this particular test user, the Email for sharing the site is sent to
[email protected] (the account logon name), not
[email protected] (the user's email address)
How do I get SharePoint to actually use the email address of an AD user, and not use the account logon name when sending notifications?

Product User Profiles

I am trying to determine if I can apply Product User Profile directives to groups of users at once. For example, I may have a system with a few thousand users and want to disable SQL*Plus access from the whole lot of them. Obviously I'd much rather do this through roles rather than inserting all those records in the PUP table for each and every single user.
Is it possible to apply a PUP to a group of users?

Hi
PUP table accepts wild card as userids. If you have a standard pattern for your users' names, you are lucky. eg: Just use usr_% for all user starting with usr_
If you just insert '%' as userid , It revokes the rights from all users.

Can't define user profiles

Similar Messages

Maybe you are looking for