Can't delete a project

I am having difficulty deleting a project that has no photos in it. When I try to delete it, I get the message:
"This operation will delete the project “” and all of its contents from your library.
Managed master files stored in the Aperture Library will be moved to the Trash.
Referenced master files may be used by another project, library, or application. They will remain in their current locations unless you choose to move them to the Trash.
All versions, albums, adjustments, and metadata will be permanently removed from your library. This operation cannot be undone."
Now, I have run into this before where I didn't realize that I had photos from a given project in the trash, but this isn't the case in this instance. I have tried to search using every criteria that I know, and nothing seems to work. How do I find the hidden photos that are obviously tied to that project?
Thanks in advance,
Mac
Message was edited by: macorin

Yeah, I know. I initially thought that some images might not have showed up in a search because they were either unrated, or rejected. I narrowed the search down to even include those items. Still nothing showed up. I didn't even have any photos in my rejected bin.
Again, not really a big deal. It's over with. This has only happened once where I couldn't figure out where the images were. In other times, I have been able to figure it out, by checking for unrated, and/or rejected images.
On another note, can I ask you a few other questions?
1. I can never remember how to do this. Let's say you want to delete one specific keyword from a group of images, but those images also contain other keywords that you would like to keep associated with those images. I can never remember how to do this.
2. Is it possible to change the location of keywords in an upward direction once they have been embedded beneath other keywords? For example, you might have the keyword, New York for example. Then later you created the keyword, Madison Square Garden, and moved it into the keyword New York. I know that you can create a hierarchy in a downward direction, but there doesn't seem to be a way to move those keywords up again should you so choose. I know this is probably a rare issue, and that I am probably going about organizing my keywords in the wrong way. If there is a way to to what I am asking, do you know what it is? If there isn't, would you have any advice on how to go about creating, storing and organizing keywords?
On a related topic, I used to use keywords very freely. I know that you can use them however, and for whatever you like, but after a while, it tends to be overkill. Are there other areas that you like to store metadata that takes the place of keywords? For example, could you use the Headline, Category, Caption, Editorial Update, Sub Location, or any other tag for similar purposes? Is that what those tags are for in your opinion?
I've been writing a lot of content into the Editorial Update tag as a means to give some dialogue as to what the project/event was all about so that I will remember what I did in years to come. I don't know if this is such a good idea though, because it seems to affect my search ability. So many words exist in my Editorial Update, that when I do a search for something specific, it is hard to narrow it down to what I am really looking for.
I know this is a lot to ask. Any thoughts would be greatly appreciated.
Cheers, and Happy New Year.
Mac

Similar Messages

Can i delete a project

Now this might sound like a no brainer to you experts but i literally cannot delete any projects.
HOW hOW HOw???
merci

http://www.bulletsandbones.com/GB/GBFAQ.html#deleteprojects

Can't delete Untitled Project - error

I have an Untitled project or file that is "stuck" and can't be deleted. It's blank, it appears that it did not upload completely. It doesn't auto-recover, it doesn't appear to be in CC online, just on my Android phone. How do I get rid of it?

Got it. These 2 events previously had pictures downloaded off my camera on different dates. Some pics got moved to other folders while some pics got deleted. I went into the iPhoto trash bin and emptied it...both Untitled Events disappeared!

Error while deleting a project

Hello
I want to delete a project : I 'm using the "delete" command after right-cliking. ODI deletes all interfaces, variables and so on but not the project itsel :
I get the message :
com.microsoft.sqlserver.jdbc.SQLServerException: L'instruction DELETE est en conflit avec la contrainte REFERENCE "FK_UFUNC_TECHNO". Le conflit s'est produit dans la base de données "MLPODI_MAINT", table "dbo.SNP_UFUNC_TECHNO", column 'I_UFUNC_IMPL'.
In inglish, it should be something like :
com.microsoft.sqlserver.jdbc.SQLServerException: th DELETE instruction is conflicting with REFERENCE constraint "FK_UFUNC_TECHNO". The conflict has occured in the database "MLPODI_MAINT", table "dbo.SNP_UFUNC_TECHNO", column 'I_UFUNC_IMPL'.
Does any has experienced this ? How to delete my project ?

Thank you all, HTH and Jitendra
Thanks to your advise and after reading more carefully the error message, I can now understand what's happening :
My project includes a user function that causes the issue : ODI can't delete the project because it can't delete this user function.
But I can't understand what's happening whith this function : it seems to be in a tricky situation : it has nos syntax and no description though it shoud not be possible to create a user fucntion whithout populating these fields.
When I try to enter a syntax, I have another error message talking about conflict and FK.
I can see the line related to this function in the SNP_UFUNC, SNP_UFUNC_IMPL and SNP_UFUNC_TECHNO tables. I tried unsuccessfully to delete the line (though I guess this action could be dangerous). I don't know what to do now ?

Deletion of Project System

Dear Sir,
Please help us out for the following question?
How can we delete a project system when it contains WBS Elements and Budget in SAP R/3?
Please reply on [email protected] or [email protected]
Waiting for your reply, please.

FM BAPI_NETWORK_MAINTAIN
Find more BAPI with SE37 BAPI_NETWORK_*
Message was edited by: Rene Guenther
Message was edited by: Rene Guenther

Project Online - Can't Delete Resource and User from Delete Enterprise Objects

I would like to link a resource account to a user account but I ran into an error: "The resource account
is already in use.". This is a known issue which I attempted to resolve by following the instructions in KB2881398.
However when deleting the selected resource from Delete Enterprise Objects I get a message indicating success ("The
selected Resources and Users have been deleted.") but the duplicate user is still in the listing in Delete Enterprise Objects and when attempting to link the remaining resource to a user logon account I still get the error
"The resource account is already in use."
Why is the user not deleted even though Delete Enterprise Objects reports success and how can I delete these duplicates to be able to successfully link the account?

Hi,
This might be due to your Exchange Sync issue, where your project workspace is unable to delete that user from local DB. Try following steps to diagnose the problem:
1) Go to your Resource Pool, DELETE a resource.
2) While resource is being Deleted, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Resource Deletion update, check if all goes smooth and your Resource is deleted successfully by showing process completion 100% :
( to view any error look at the
last column of table on Manage Queue Job page)
4) Cross check your Resource by running Resource Availability Report.
Basically this will give you a fair idea of your resource deletion problems and how system is responding to it.
Regards

How can I delete Garage band projects?

How can I delete Garage Band Projects?
When GB opens, it takes time to scan for jampacs and then initializes.
How can I skip that?
I have no All My Files showing in Finder.

http://www.bulletsandbones.com/GB/GBFAQ.html#deleteprojects
(Let the page FULLY load. The link to your answer is at the top of your screen)

How can I delete the video tracks from an iDVD project?

I try to use "canc" botton: the video track is deleted on menu, but when I try to insert a new video, iDVD (7.1.2) alert me: "The maximum number of tracks (presentations and movies) is 99. You can not create other tracks."
Then, how can I delete the video tracks (or presentations) really?
Help me, please!

Hi
What is Your original material ?
Did You create Your movie in iMovie/FinalCut ?
iDVD is limited to 99 Chapters (in a movie) or 99 Photos in a SlideShow.
What are You trying to create ?
Yours Bengt W

Can't delete project and blank dots photos

Hi,
I am trying delete some projects, but when I re-launch they're still there. When you click on those project they're are no photos in them, but in the viewer you see dotted boards with no photos in them, but some are portrait and some are landscape as if the picture exist.
Does anyone know how to fix this? Any help would be most welcome.
Best wishes
Michael

I had exact same problem. The following thread provides the solution that worked for me.
http://discussions.apple.com/thread.jspa?messageID=9222468&#9222468
Good luck...

How can I delete blank pages in iPhoto project?

How can I delete blank pages in the middle of an iPhoto album?

I believe you can right click on the images in question and delete them.

I can't delete the master file, which is located on my external HD, through aperture

I import a folder to aperture which is stored on my external HD, and keep the originals on the HD. If I try to delete a master file with the option, file-delete master image and all versions, the photo deletes from Aperture, but not my hard drive. I have even tried to delete my trash, but no luck. Please help, otherwise I do not want to use aperture for file management, which was one of my major reasons for buying it.

After you've deleted a file it from the project it goes into Aperture Trash. When you empty Aperture Trash (Aperture>Empty Aperture Trash) you will get a dialogue box asking "Are you sure you want to permanently delete all items in the Trash?" Under this there is a checkbox giving you the option to "Move referenced files to System Trash". If you check this box it will move the master to the system trash, and from there you can permanently delete the file.
All this is to stop you from accidentally deleting work.

Can't delete file after renaming due to Word file handle still present. Error staes document is still in use but it's really not. Worked fine in 2007 but not in 2010.

I have some code associated with a Word Template. The template is opened, filled out and saved via a routing in vba. This all works fine in older 2007 version (which is version it was originally created in). Once this file is saved, the user can change the
date in a text box and re-save document. The code saves using the new date for part of new file name and then deletes that older file from the server. It fails at the delete function because the newer version of word is not dropping the file handle from the
first named file when user saves it to the new filename. In older version (2007) this handle was released as soon as file was saved to a different name. I can't seem to figure out how to release the old document filename so the old document file can be deleted.
I hope I explained this well enough.
Here's the code that woeked in version 2007 but fails in version 2010.
Option Explicit
Dim CAPEX01 As MSForms.ComboBox
Dim CAPEX02 As MSForms.ComboBox
Dim LocalPath As String
Dim NetPath As String
Dim OldPath As String
Dim OldPathNet As String
Dim DocName01 As String
Dim DocName02 As String
Dim DocName03 As String
Dim DocName04 As String
Dim DocName As String
Dim DocNameold As String
Dim TestDocName As String
Dim filesys
Dim newfolder
Sub AutoOpen()
ActiveDocument.ActiveWindow.View.Type = wdPrintView
TestDocName = ActiveDocument.TextBox2
OldPathNet = "\\yourPath\" & TestDocName & "\"
End Sub
Sub AutoNew()
TestDocName = ActiveDocument.TextBox2
OldPathNet = "\\yourPath\" & TestDocName & "\"
ComboBox1.Locked = False
ComboBox1.Enabled = True
FillList1
FillList2
End Sub
Sub DeleteOldDoc()
OldPathNet = "\\yourPath\" & TestDocName ' & "\"
DocNameold = OldPathNet & TestDocName & "-" & DocName02 & "-" & DocName03 & "-" & DocName04 & ".doc"
    If Not TestDocName = DocName01 Then
        Set filesys = CreateObject("Scripting.FileSystemObject")
    If filesys.FileExists(DocNameold) Then
        filesys.DeleteFile (DocNameold), True
'I get file permission error here
    End If
    End If
If DocName01 <> "" Then
If Not TestDocName = DocName01 Then
If Not TestDocName = "" Then
    MsgBox "Project Proposal Has Been Moved From Year " & TestDocName & " To " & DocName01 & ""
End If
End If
End If
TestDocName = DocName01
End Sub
'''''''Document path functions''''''
Sub chkpath()
Set filesys = CreateObject("Scripting.FileSystemObject")
If Not filesys.FolderExists("\\yourPath\") Then
   newfolder = filesys.CreateFolder("\\yourPath\")
End If
If Not filesys.FolderExists("\\yourPath\" & DocName01 & "\") Then
    newfolder = filesys.CreateFolder("\\yourPath\" & DocName01 & "\")
End If
End Sub
''''''Save Function''''''
Private Sub CommandButton1_Click()
DocName01 = ActiveDocument.TextBox2
DocName02 = ActiveDocument.TextBox4
DocName03 = ActiveDocument.TextBox1
DocName04 = ActiveDocument.ComboBox1.Value
chkpath
NetPath = "\\yourPath\" & DocName01 & "\"
DocName = NetPath & DocName01 & "-" & DocName02 & "-" & DocName03 & "-" & DocName04
ActiveDocument.SaveAs2 FileName:=DocName, FileFormat:=wdFormatDocument
ComboBox1.Locked = True
ComboBox1.Enabled = False
ComboBox2.Locked = True
ComboBox2.Enabled = False
TextBox1.Locked = True
TextBox1.Enabled = False
TextBox3.Locked = True
TextBox3.Enabled = False
TextBox4.Locked = True
TextBox4.Enabled = False
DeleteOldDoc
End Sub
Sub FillList1()
Set CAPEX02 = ActiveDocument.ComboBox2
With CAPEX02
      .AddItem "CASTING", 0
      .AddItem "HOT ROLLING", 1
      .AddItem "COLD ROLLING", 2
      .AddItem "FINISHING", 3
      .AddItem "PLANT GENERAL", 4
      .AddItem "MOBILE EQUIPMENT", 5
End With
End Sub
Sub FillList2()
Set CAPEX01 = ActiveDocument.ComboBox1
With CAPEX01
      .AddItem "A Name", 0
      .AddItem "Another Name", 1
End With
End Sub
Private Sub CommandButton2_Click()
    UserForm1.Show
End Sub

mogulman52 and Don,
I went back and looked at my code and had already updated it to SaveAs in the new docx format. It still holds the lock handle in place until Word closes, unlike earlier versions which released the lock handle when you did a SaveAs.
As a note, all my Word and Excel macro-enabled (dotm & xltm) templates are read only and are never filled in, prompting the user for a file name on any close event or if they run the code gets auto-named. I do the SaveAs and concatenate the file name
from data on the document (or sheet) that has been filled in. During the SaveAs the docx gets saved to a network folder and also on a local folder. The lock gets renamed to the filename and remains until Word is closed.
So my code still fails at the point noted below while trying to delete an old filename version after the file has been saved as a new filename in a new folder. So....
The code is looking in the last folder where the docx file was saved for the older filename so it can be deleted. The newest docx version has already been saved in a different folder and has a new lock handle of its own. That lock is not my problem, it's
the older file lock which really exists in the same folder as the first filename that the docx was saved to. It does not release that lock until I exit Word. My work around has been to instruct all users to manually delete the older version file.
The other odd thing is this only happens when I run it from code, if you manually go through these steps with the SaveAs menu drop-downs in Word it will release the lock handle???
Hope this isn't to confusing and thanks for all your suggestions and help.
Sub DeleteOldDoc()
OldPathNet = "\\yourPath\" & TestDocName ' & "\"
DocNameold = OldPathNet & TestDocName & "-" & DocName02 & "-" & DocName03 & "-" & DocName04 & ".doc"
If Not TestDocName = DocName01 Then
Set filesys = CreateObject("Scripting.FileSystemObject")
If filesys.FileExists(DocNameold) Then
filesys.DeleteFile (DocNameold), True 'I get file permission error here- lock handle is still present from last SaveAs command in last folder where previous version of file was saved.
End If
End If
If DocName01 <> "" Then
If Not TestDocName = DocName01 Then
If Not TestDocName = "" Then
MsgBox "Project Proposal Has Been Moved From Year " & TestDocName & " To " & DocName01 & ""
End If
End If
End If
TestDocName = DocName01
End Sub
Glenn

How can i delete the masters of iPhoto without losing my photos

Mac Book Pro (Mid 2012) 13 inches
256 Solid State Start up Insert in DVD Drive
1T Hard Drive in reg slot
16 GB Ram
Mavericks 10.9.4
iphoto 9.5.1
I am currently keeping my iPhoto library on my 256 SS Main Drive of my MacBook Pro.
How can I delete the masters of iPhoto without losing my photos in the main iPhoto display library and all their masters and edits.
I take loads of photos and import them and then will keep only 5% of the ones that I import. As a result I have a masters folder of over 50GB and actual photos that take up less that 5GD. Is it possible to delete the master folder without losing all the photos and without having to pain stakingly go through every folder and pick out from literally hundreds the ones that i kept and edited. How do I reduce the size of the masters just down to the ones that I have kept and not every single photo and video that I imported in the history of my iPhoto experience.
If I delete the master folder will all the photos and their edits be deleted.
If so, is there a way to just delete the masters that are no longer in the iPhoto library, while keeping the masters and edits of the ones that I clearly want to keep because they are the ones that I did keep.
Why do they keep the masters of photos that I clearly deleted and emptied the trash on.
I like to maximize space and this would help a lot to clear up for me. Thank you.

All the 5000 photos that reappeared after repair today were from my canada mega event, but for some reason it did not do it for all the other mega events. It is a start but not complete.
Try the rebuild to recover more lost photos.
If "rebuild" with iPhoto does not recover more lost photos, rebuild with iPhoto Library Manager as described by Old Toad in this thread, but rebuilding with iPhoto Library manager will not recover your projects like cards, bilks, slideshows.
Re: iPhoto glitch with retained masters https://discussions.apple.com/message/26354337#26354337
Mostly the way I organize all my photos is that I make a folder for each country I visit. i.e. New Zealand Folder, Canada Folder, India Folder; and at the same time, any photos that I import I delete directly from new imports and just keep the ones i want and then i go up to events and move the latest imported event into a mega event for that country and so they all get joined in a sense.
As a workaround, merge the events right after importing, before you start deleting photos. And empty the trash always before merging projects.
You might consider to use albums instead of events for your country lists. I simply use the events as basic containers. One event for each day of shooting photos. I found, that smart albums and searches are quicker in iPhoto and Aperture, if the events are smaller, also browsing is easier, if the events are not so large.
You can merge albums and remove photos from albums without the problems mentioned above.

How to delete a project in Oracle apps R12

Hi
OS RHEL 5.5
Database 11.1.0.7
Applications R12
Initially I have created a project in oracle apps from wrong template and modified the template then created a project with the same modified template.
Now the wrong project needs to be deleted so how to delete the project which had been created from wrong template in oracle apps R12 and integrated project with MSP.
Both the wrong and correct projects are referring to the same template.
Please help me to delete the project as it is done in production database.
Rgrd
Edited by: 955685 on Feb 4, 2013 8:10 AM

955685 wrote:
Hi
OS RHEL 5.5
Database 11.1.0.7
Applications R12
Initially I have created a project in oracle apps from wrong template and modified the template then created a project with the same modified template.
Now the wrong project needs to be deleted so how to delete the project which had been created from wrong template in oracle apps R12 and integrated project with MSP.
Both the wrong and correct projects are referring to the same template.
Please help me to delete the project as it is done in production database.
Rgrd
Edited by: 955685 on Feb 4, 2013 8:10 AMPlease see these docs/links.
Delete Project Functionality not Working [ID 1060648.1]
PRC: Delete Project Performance Reporting Data Completes With Error ORA-12838 ORA-6512 [ID 748674.1]
How Can the PA Period Type Be Changed if It Has Been Entered Incorrectly? [ID 881424.1]
PAXPREPR Unable To Delete Project [ID 874642.1]
http://www.oracle.com/pls/ebs121/search?word=Delete+AND+Project&format=ranked&remark=quick_search
Thanks,
Hussein

How to delete the project version RELEASED.

System is below:
" Project 1522DJ110001 version RELEASED already exists
Message no. CJ016
Diagnosis
A Version RELEASED already exists for project 1522DJ110001.
System Response
Processing stopped. "
but in the system , there are no "Project 1522DJ110001". so the user can't create the project "1522DJ110001".
how to delete the Project 1522DJ110001 version RELEASED ?
Please explain me all the steps to be required.
Thanks in advance!

Hi Harish,
When I select Delete Project Version from Extras menu in CN41, its asking session number and version.
In session number no serch help is avialble. I am keeping it blank and seleting RELEASED in version.
After pressing enter I am getting an error Project Version RELEASED cannot be deleted??
Let me the exact steps to deleted the Project Version.
Thanks and Regards,
Atul R. Rajmane

Can't delete a project

Similar Messages

Maybe you are looking for