Can't delete from portal content areas

Sun Solaris o/s version 2.7
Oracle Portal version 3.0.9.8.0
9iAS version 1.0.2.2
Oracle Database version 8.1.7.1.0b
Some users are suddenly unable to delete from content areas. The
following error occurs:
An unexpected error has occurred (WWS-32100)
An unexpected error has occurred (WWS-32100)
ORA-1;User-defined exception (WWC-36000)
normal, successful completion (WWS-00000)
This has worked fine in the past. One user is also complaining
that she is intermittently getting a 'The page you requested was
not found' error when trying to add files.
Does anyone have any idea what could be the problem?
Thanks.

"Recent" (at least on Windows) is not an actual folder; it's just a list of recently used files/documents. I clean such things using CCleaner.

Similar Messages

How do I identify the files that can be deleted from flash recovery area?

Greetings.
My RMAN backup failed last night:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on oem_disk_backup channel at 05/18/2010 23:05:53
ORA-19504: failed to create file "/opt/oracle/flash/<directory_name_here>/datafile/o1_mf_users_%u_.dbf"
ORA-27044: unable to write the header block of file
Linux-x86_64 Error: 28: No space left on deviceWhen I run the following:
select * from v$flash_recovery_area_usage;I get the following output:
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 2.7 .02 61
BACKUPPIECE .37 0 1
IMAGECOPY 77.58 44.81 22
FLASHBACKLOG 3.86 0 144How do I identify and delete those files taking up the <tt>PERCENT_SPACE_RECLAIMABLE</tt>?
Thanks,
Jeff

You would have to be backing up one big file to encounter a space issue with 34GB free and that much freeable space in your FRA. Does your alert log show any error messages?
It's possible that based on your CONTROL_FILE_RECORD_KEEP_TIME or other issue(s) that older files are left in your FRA.
Basically, you can run the following commands and anything older than what is shown in this list can be removed.
RMAN> list copy;
RMAN> list backup;
RMAN> list archivelog all;To be on the safe side, you could rename the older file(s) on the filesystem that don't show in the list above. Then run a CROSSCHECK and LIST EXPIRED in RMAN to ensure it doesn't want one of the files you want to delete. If the LIST EXPIRED doesn't show anything, then it should be safe to delete the file from the filesystem.
You also may want to ensure a large file wasn't deleted on the filesystem that still has a file handle open for it. lsof can show any of those files.

Portal Content area not displaying in Portal

I tried to disable Portal favorites option from Content admin -> Default Frame work Page -> Detailed navigation. Instead of only disabling the default navigation I have disabled the entire Portal content area and I am now not able to see any content in the Portal except the masthead area and the Top level navigation.
Can any one please help me on this.
Thanks.

Hi,
Check the content area iview in the Desktop inner page in framework page.If this iview is not there then it will not show the content area.
If desktop inner page is deeted then also you will not see the content area.
If so please add the content area iview indside the Desktop inner page then you can see the content area for the users.
Content area iview will be available under the following path of the portal
Content Administration > Portal Content > Content provided by sap > Admin Interfaces > Admin Iview Templates > Content Area (view).
Thanks,
Regards,
Rudradev Devulaplli

Removing the Vertical scroll bar from the content area.

Hello,
Is there a way to remove the vertical scroll bar from the content area?
I am trying to create a new light portal frame work.
Everything works fine except that I see two vertical scroll bars, one from the content area and another from the page(frame).
Thanks in advance.
-Sudheer

Hi
There are a couple of ways in which to achieve this
1) Try and make the content flat. What I mean by this is that the content area (when using the standard light framework) doesn't contain an iframe, meaning that the iview defined on the page has "EMBEDDED" isolation mode. This should mean that you only have one scrollbar (if the content extends past the size of the browser)
2) If you need to make the iview URL isolation, then try and get the domain of the content to be of a similar domain to your portal server, i.e. your portal is portal.company.com and the content is content.company.com. In this way you can make the pages expand.
NOTE: One thing to note is that when using URL isolation iviews doesn't allow the automatic expanding of the iframe content. This is because the standard javascript doesn't allow this. Therefore you may have to write your own javascript function (or content area page) to do this
I hope this helps
Darrell

Open KM Link(to KM Resource) in portal content area

Hello,
Open KM Link (not external link) created in KM to html/htm page located in KMcontent in Portal content area.
Is there any way can I open KM link created in same window (Portal content area) not in new window? By default it always opens in new window? From these links I created KM Navigation iView layoutset as LinkList explorer.
Thanks

Hi Mark,
As mentioned by VS..look into the iview property and then checkout the "Launch In" or "Display State" (sry cannot remember by hard) and set it according to what VS indicated above. This way, when you click on the iview from your Portal (not preview), it will display in the content area.
Additional info on iview properities.
http://help.sap.com/saphelp_nw70/helpdata/EN/69/0ccb3ffe0ad969e10000000a11405a/frameset.htm
Hope that helps.
Ray

Portlet repository-- Seeded providers does not show Portal Content area

Hi,
When I login to portal as admin user go to administration --> Display portlet repository--> Seeded providers does not show Portal Content area.I tried to search but no results shown.
Any idea as to how to get it back ?
Thanks and regards.
Neeti.

1. From the Portal Object Navigator, click on the Applications
tab.
2. In the "Find" box, type %search% and click "Go"
3. There are 2 reports you need to modify, depending on which
portlet provider you want to use: RPT_SEARCH (owned by
people_app) and SEARCH_RESULT (owned by wwv_system)
4. For each report, click the "Edit" link
5. Click the "Display Options" tab
6. Under the "Full Page Options" heading, change the "Size"
for "Row Text" to 12. (If you are running the reports as
portlets, then you must also change the "Size" for "Row Text"
under "Portlet Options".)
7. Click OK
Search results are now visble using either portlet, the Oracle
Portal provider or the PEOPLE_APP provider.
You may also need to change the field settings on the hierarchy
if now when you run the people search you receive SQL errors.
Here is what worked for me (assuming you want to change both
users components):
1. On the Application Tab search for %search% and %detail%
components. You don't need to change the WWMON components.
Change the font size on the full page and portlet options
(Display Options Tab)for the heading and text (I use 12 and
11pt). Otherwise the default can only be read with a magnifying
glass.
2. The org chart components are slightly different. Search for %
org% and you will find 2 components org_chart and orgchart. Both
of these need to have the column fields changed (Table or View
Column tab) as well as the font size for the Parent, Child,
Grandchild (Display Options Tab). Here are the Table Column
settings (for some reason they are initially blank - yet will
fail if recompiled without values):
People_App.Org_chart
1. key values:
primary key - empno
parent key - manager
start with - empno
ww_system.orgchart
1. Primary Key Column WWSEC_PUBLIC_DIRECTORY.ID
Parent Key Column WWSEC_PUBLIC_DIRECTORY.MANAGER
Start With Column WWSEC_PUBLIC_DIRECTORY.ID
Hope this helps. The second half of the answer provided by Rich
Pickett.

How do i delete from portal.wwdoc_document?

Hi,
i followed the instructions of modpls user's guide and lama madi (?) an managed to build an application to up- and download files. but i store the files in my own tables. unfortunately all files uploaded are stored in portal.wwdoc_document too. I succeeded in building a report on wwdoc_document, but when i try to build a form or even when i try to manipulate wwdoc_document from sqlplus (as sysdba) i get an 'insufficient privileges'-error when i want to delete files.
Access for select/delete for orcladmin is granted on wwdoc_document.
So, what is my mistake?
thank you,
Ralf Schmitt

Hi Ralf,
try deleting from portal.wwdoc_document$ instead of wwdoc_document - it's an updateable system view on the same table and you can use it in-session.
Otherwise if you wish, use portal.wwdoc_api.remove_document(name)
Hope this helps
Andrea

Room part page occupying det. nav and portal content area..

Hi,
I have created a room part from a custom created room-part template (say MyGoogle room part template). i have added a parameter called "search term". So, when creating a room, the user should enter a value in this parameter(say FLOWER) ... and the result.... should be..as follows:
>>>>>>>>>>>>>The URL should then always load with the following url: http://www.google.com/search?hl=en&q=FLOWER. Everytime a member of the room enters the room, they see a search in Google, with results for the search term - "FLOWER".
Well! i have achieved this ...but, the problem is that.. the detailed navigation is going away and the google results page is occupying the entire area below TOP LEVEL Navigation.. (detailed navigation area & portal content area).. I want the resulting page to be displayed in portal content area only .. and the detailed navigation should be visible too(with room hierarchy and stuff) ..
Any1 who can help me on this...
Regards,
SK.

Hi All,
Any ideas?
I just want to get rid of the redirection - I am using a redirect, and it takes away the left navigation pane!
My component should be able to load a webpage without redirecting and taking over the entire lower half of the portal screen.
Regards,
SK.

Hallo! How can i delete my files wich are saved not on the C: drive?

Hallo! How can i delete my files wich are saved not on the C: drive?

I'm guessing there must be more to this question than you are stating.
But to answer the question you asked, if you want to delete files that are not on the C drive, select the files and then delete them (press the Delete key, and then Delete from Hard Disk or not, your choice)

BI content with folder structure in portal Content Area

HI Dear Friends,
I have a requirement in my current project where i am integrating the BI reports with SAP EP.Iviews are associated with BI Reports.In the portal on clicking workset it should display folders in the portal content area with Icons instead of in Detail navigation .On click of the displayed folders it should display its sub content with Icons.
I tried in all ways but later i came to know there there is a SAP BI business package which would come up with predifined iviews associated with BI. By importing this business package we can dispaly the BI content in the portal in a folder format .
I am using BI and EP 7.0 versions.
Ratnakar

Ratnakar,
   Let me understand your requirements, correct me if I understood it wrong. You need to display BI reports in Folder structure that is similar when you log on through BEx analyzer or WAD. If this is correct, then you need to upload the BI Role which contain all the required Folder structures and it BI Queries or BI Queries url assigned to that role.Once you upload this role on to portal , you will see folder structure on PCA.
Example
BI Reports - Folder 1
I--> FI reports -- Subfolder 1
I            I--> AP reports 1
I--> CO reports -- Subfolder 2
               I--> Cost Report 1
Hope it helps,
Cheers,
Balaji

XML Form - Link open in Portal Content Area

I have created an XML form which displays a list of images as links to KM documents (eg a Read More... link).
The problem I have run into is that any link that you click on opens up in a new window.
Is there a setting somewhere that indicates that all links should be opened in the portal content area, rather than in a new window?
Thanks in advance for any assistance.
Kind Regards
Rasim

Rasim,
You can try doing this.
Logon to Portal.
Click Personalize option on the top left corner and choose work protect mode.
Choose "Discard unsaved data (open page in same window)"
Save and Exit.
Logoff and relogin and check.
Hope this helps.
Sandeep Tudumu

Open KM Document in Portal Content Area

Hi All,
I have created a KM Document iview. I did upload 1 document in KM Repository (test.doc) and have given this path in the document iview.
Now when I preview the iview......then i get a dialog box Open, Save, Cancel. On pressing Open, the doc gets opened in the New Window in MS Word.
I want the document to be opened in the same window when I click on the link.
Plz let me know how to achieve this.
Regards
Nikhil

Hi,
At the iveiw level (document iview or URL iview), you can set the property "Launch in New window" to "Display in Portal content Area".
Consider awarding points if this helps.
Regards
Ramesh Kotagiri

Java.lang.NullPointerException in xRPM iView Preview from Portal Content

Hi all,
When I am trying to Preview the xRPM iViews from Content Administration>Portal Content> Portal Content> Content Provided by SAP> End User Content> Project Portfolio and Design Collaboration> iViews>Portfolio Manaagement> Item Dashboard
I am getting the following error
"500   Internal Server Error
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.xapps.cprxrpm.ui.portfolioitem.dashboard.component.ItemDashboard.execute__Rpm__Item_Getlist_Input(ItemDashboard.java:339)
    at com.sap.xapps.cprxrpm.ui.portfolioitem.dashboard.component.ItemDashboard.wdDoInit(ItemDashboard.java:221)
    at com.sap.xapps.cprxrpm.ui.portfolioitem.dashboard.component.wdp.InternalItemDashboard.wdDoInit(InternalItemDashboard.java:1559)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    ... 27 more
But I can view the "Item dashboard" on the xRPM under Portfolio Management.
I don't know why I can't Preview the same from Portal Content. My objective is to pick this iView and add this to another Customised workset/Role.
Pls help me.
thanks and warm regards
Purnendu

Hi,
Have you had a chance to fix this issue, pelase let me know?!
Thanks,
Parthi

SAPUI5 Application doesn't display in Portal Content Area

Hallo Guys
We are developing a SAPUI5 application that needs to be displayed inside the portal.
The problem is that the SAPUI5 app doesn't display in in the content area, no erors, just a blank page, you have to set the iview to open in a seperate headerless window, then it works. But it needs to work in the content area.
Our findings: a possible cause is that the IE mode when inside the Portal content area is IE5 Quirks, and when it displays in a new window, the mode changes to a more recent and acceptable mode for SAPUI5, IE9.
Is there any solution to this? We get the same result with both URL iView and using the SAPUI5 iView in content provided by SAP. We are on NW 7.4
Regards
Antonette

Hi Antonette,
As Lawrence explained the reason is indeed that quirks and standards mode can't run together on the same page (not only in portal but it's a limitation by MS).
Since your framework page is in IE5 quirks mode the UI5 application doesn't run in the content area, you can run it by selecting in the iView properties "Launch in a new headerless window (strandards)", that will open the UI5 application in a new window and will work.
If you wish to run UI5 applications in the content area you can get latest SP of 7.4 and there you will have a new framework page: standards AFP, basically an AFP framework page that works in standards mode.
In that framework page you can run UI5 applications in the content area, however trying to run old applications (HTMLB, not WD) may fail, for WD you have a paramater you need to pass called sap-ie, passing it with the value of "Edge" will make sure WD applications run in standards mode as well.
When running the AFP in standards mode you will need to open your HTMLB and other old applications in a new headerless window or new window so you can see the content.
Hope this helped,
BR,
Saar

Give iView as link in portal content area

Dear All,
I have divided my portal content area into 4 section. In one section i got my GP process. I have created the process as iview. I have tried to give this iview link to the end-user to open the process. Is it possible to bring iview inside one section of content area. If any one did this or got knowledge on this, pls through some light on this.
with Regards,
Balachander

Balachander,
not sure what do you mean by "bring iview inside one section of content area". Are you willing to show only the single iView or you want to show it with some other iViews also? For first case URL to the single iView will work. For the second type of requirement you can add the iViews inside a page and give the Page URL to the users instead of iView URL.
Regards,
Shubhadip

Can't delete from portal content areas

Similar Messages

Maybe you are looking for