Can`t detect ATI AVSTREAM ANALOG CAPTURE

I got a problem when i try to detect a TV Tunner Card: ATI AVSTREAM ANALOG CAPTURE with jmf. I got this message:
" the dispositive can`t be use when another applicacion like video, DVD conference, video edition o webtv for windows
is using.If WebTv has been instaled and is running in your sistem, make a pause at video datos services of webtv."
The card works fine with movie maker so it `s not problem of the card, and i don`t have another aplicacion that is using the card.

Miguel Angel wrote:
well actually the message is in spanish and is this:I don't think JMF would spit out Spanish... which makes me think this isn't a JMF message.
Is your ATI card VFW or DirectShow compliant?
so if you understand spanish maybe you can help me.The device cannot be used when in use by this or another video application, like DVD, video conference, WebTV for Windows. In order to use this device with the current application, close the other application that is using it. If WebTV is installed and running, pause the "WebTV Video Data Service" in the taskbar by right-clicking its icon and selecting "Pause Service"...

Similar Messages

Zbook14, can't detect ATI.firepro.M4100

Hi,
After updating bios to latest version 01.20 REV. A(28 Jul 2014), and setting to default.
The system(win7,64-bit) can not detect ATI_firepro_M4100, even reinstalling the system.
I already tried every version of driver listed on HP website.
Any idea? Does someone meet the same problem like me?
thanks a lot,

Hello @TzuMori,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your computer is not able to detect ATI.firepro.M4100, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

Can't adjust video levels in capture tool

I'm using a Blackmagic Multibridge Pro as my I/O but when I try to digitize, the video input levels are hot. i want to adjust them in the capture tool but it's grayed out. I'm capturing from a Beta SP deck with a component signal. Anyone know how to fix this?
Thanks.

page 243 in the FCP6 manual states that "video levels can only be adjusted for analog video interfaces" it says nothing else. i'd rather adjust the levels from the source anyway whatever medium I am working in anyway. you might else well stick with that.

713x BDA Analog Capture defaults to SVideo?

I am having trouble using the MSI TV@nywhere Plus to stream live video from the composite input to a provider like ustream.tv.
Using a free version of webcamxp/webcam7, I am able to view/stream video ONLY when I select '713x BDA Analog Capture', then 'Video Input > Composite'. Some other clients (such as the ustream.tv producer client), there is only an option to select '713x BDA Analog Capture', which does broadcast (i can see the static being broadcast), but not from the right input port. Unfortunately, I am not able to select the 'composite' video input source, which I think is the problem.
Is there a way to change default the video input for this card? Is there another way to work around this?
I have tried connecting the camera (BNC output) to the TV@nywhere card differently, but found it only worked using: BNC -> RCA -> composite cable -> svideo port on the TV@nywhere card.
Any help would be GREATLY appreciated.
Thanks,
Matt.
Technical Details:
TV@nywhere Plus
Windows XP Home Edition SP1
AMD Athlon 2400+
512MB RAM
DirectX 9.0c

Have you tried BNC female to f male adapter using the antenna/cable in? I didn't have any luck finding BNC female to male PAL, native connector for the cable in is male PAL (card socket is female PAL) but PAL is hard to find in US since it's mostly used in Europe.
I don't know if this type of input would work but the adapter is cheap enough to give it a try.
http://www.l-com.com/item.aspx?id=5368

My system can't detect Videocam thru firewire

I have tried to connect my videocam to my PC thru firewire.
After connect, I on my Videocam (set to video mode) but XP can't detect any new device. ???
I have tried lugging the 6 pin firewire to the back of the CPU and also onto the optional IEEE 1394 connectors using the IEEE1394 bracket.
I have check the BIOS and the IEEE1394 is ENABLED.
When I view the network connection under LAN or High-Speed Internet, the 1394 connection shown
Connected, Firewired
1394 Net adaptor
My Videocam is JVC GR-D270.
I currently do not have any software to capture the video other than window movie maker.
Appreciate if someone can advise on how to go abt this problem.
Thank

Quote
After connect, I on my Videocam (set to video mode)
Did you already try ALL possible modes on the videocam? Did you check the videocam's manual that video mode is the correct setting for making contact with the computer?

How can i detect digital signal transitions?

Hi,
I have to monitor several digital signals and i'm not interested in the signals themeseves,but in their transitions because those represents important events in my problem.
I have an E series daq card, so i think that the only way i can do this using digital inputs, is by polling.
My problem is that i cannot loose any transition and i need an accuracy of about 10-20 ms to accomplish this.
Do you think that's possible using polling?
Can i use my daq analog inputs(because in this case my daq card support buffering) instead and try to detect transitions?
Thank you in advance,
Luca Tascedda

I believe the state detection is event-driven. You might take a closer look at the manual for the 6533 (available on-line) and at the example in our developer zone. You can query for
"Change Detection with Time Stamping" or follow this link.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3DC7956A4E034080020E74861&p_node=DZ52327&p_submitted=N&p_rank=&p_answer=&p_source=External
Alternatively, you can use the analog trigger, though I think this works with just one analog channel at a time.
Good Luck.
Preston Johnson
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

Dropped frames were detected during the last capture attempt???

I have been getting the message "Dropped frames were detected during the last capture attempt". I cant figure out what it is.
I have a Mac OS X version 10.4.11 Processor 2 x 2.66 GHz Dual-Core Intel Xeon
2 external lacie disk drives, 1TB each
FCE Easy setup: all formats, Use: DV-NTSC
Sony DVcam HDV HVR-M15U Deck firewired to back of Mac
Can someone help?

Dropped frames during capture are typically a result of a slow disk setup.
Where is your Capture Scratch folder? (System Settings)
Are you external drives connected via Firewire also?
Often the internal drive (SATA) is much faster than the Firewire
interface. Try capturing to your internal, then moving to
the externals for editing and backup.

Can't detect "creative webcam pro"

Hi,
can't detect "creative webcam pro",
Vector devices=CaptureDeviceManager.getDeviceList(null);
System.out.println(devices.size());
System.out.println(devices.elementAt(0));
i get:
1
JavaSound audio capture : javasound://44100
"java JMStudio" doesn't detect also.
win 2000, JMF2.1.1b(Java),JDK1.4.1.
can somebody help me?

Hi.
I have the same problem with my Logitech webcam. But i tried the registry scan and the webcam appeared. But: With CaptureDeviceManager.gerDeviceList(..) I get only 2 sound devices, not my vfw-webcam.
Any idea?
Greetings, Steffen

Analog capture device ?

I need to buy a analog capture device, can anyone recommend one that works well with Adobe premiere elements

If you mean an A-D "bridge," then I'll add a few:
The ADS Pyro gets a lot of high marks, and many here, plus on Muvipix use it. IIRC, the price is about US$150. You might want to survey this forum and also Muvipix for comments on this device.
Canopus offers at least two: the 110 & 300 versions. Were I buying, I'd probably opt for the 300, but it is more expensive. I like the TimeBase correction available. The 100 is about the same price as the ADS unit.
I happen to use a Turtle Beach caputer card and it works well. If I did not already own it, then the Canopus 300 would get my vote.
Good luck,
Hunt

Elitebook 6930p BIOS can't detect wlan.

Hello, after new bios update ATI F.20 my laptop can't detect wlan. In bios it show NO DIVICES. Please help me.
This question was solved.
View Solution.

Hello @KipsasLTD
Thank you for posting on the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since the Elitebook 6930p is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP EliteBook 6930p Notebook PC
I hope this helps!
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

just a summary...
i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
now, back to the topic..
so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
"4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
after reinstallation of itunes my DVD drive can be seen and just noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
so going back to the topic..
i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
so now i opened iTunes and BOOOM!
iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
[for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
and then you will see the screen below
click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
BUT the problem here is that your iPhone can't be detected on iTunes...
now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

Hi LSGZ,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
- Brenden

Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.

Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.I restore it and then it works for a while, but then a couple weeks later I'll plug it in and I get the same message again. It's very frustrating because even though I have all the settings to save to cloud, my apps and data don't all come back.

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

My Macbook Pro can't detect or read my CDFS file system external HDD

My Macbook Pro can't detect or read my CDFS file system external HDD

Open Disk Utility and see if the USB drives show in there. If they don't then it is a USB port or bus problem. If they do show in disk utility are they formatted in either Mac extended or a Windows format?

Can`t detect ATI AVSTREAM ANALOG CAPTURE

Similar Messages

Maybe you are looking for