Can't detect in printer device

when i press ctrl+p in printer field my device can not detect... so please help me...

,Welcome to the HP Forums! I read about the issue you're having when trying to print by using the "Ctrl+P" command. I will do my best to help you however, I will need some more information from you to begin with, and I also have a few suggestions to start.
Please respond to me with the following. If there are any steps here that you have not tried, please try them before responding and include the result in your reply back to me:
How is the printer connected (USB/ wireless/ wired/ Bluetooth)?Have you tested hardware functionality (made copies) and do they work successfully?Have you tried printing from different programs?Can you print from any programs?Have you tried uninstalling and reinstalling the software?Run the Print and Scan Doctor and include the results in your reply.Did you make any recent changes to your set up (physical move, upgrade, downgrade, new software installed, new router, etc)?Is the printer plugged directly into the wall outlet (avoiding power bars and surge protectors)?Have you tried using a different USB/Ethernet cable?Do you see any error messages or codes, and if so, what are they saying and where do you see them?
Thank you

Similar Messages

Hp soluation center can't detect any hp devices

have installed the software and drivers on a acer laptop with windows vista home basic,all software and drivers installed. when i clicked on the shortcut for hp solution center it said it can't detect any hp device. but when you print the printer prints the other software works. the printer driver is installed. also when i plug the printer in the safely remove hardware said safely remove usb mass storage device - drive (f. please help thank you hp photosmart 7260

i downloaded the software from hp,it was for windows vista 32 bit . it loads but the hp solution center said it can't detect any hp devices. the rest of the software and drivers work. thank you

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze

Can't detect or print to C8189A All-in-One-Printer on a wired LAN

Computers on my home wired LAN repeatedly but intermittently stop being able to print to the HP C8189A printer attached via wired LAN connection. I began trouble shooting last night and uninstalled all HP software to start afresh.
I cannot print to my HP C8189A all-in-one printer conected to a wired network from my desktop PC running Windows XP with SP3. I can see the printer has pulled an IP from the router by looking at the router's attached client list. I can ping the printer at its assigned LAN IP address.
My desktop pc and the C8189A printer share a common DLINK Gigabit Switch which connects wired wired LAN to the DLINK router.
I uninstalled and reinstalled all HP software but during the HP Solutions Center software reinstall it could not find the PRINTER on the lan, even when inserting the Printer's assigned IP address.
When checking the network configuration from the printer, it confirms that it is has the correct IP address, but the HP software still cannot detect it. I have pulled the power connector from the back of the power a couple times to RESET the printer. This usually corrects what is now a terribly frustrating problem accessing the printer.
Additional factoids: 1) other PCs can print to this printer, 2) SPYBOT Search & Destroy is running on my PC and popped some registry change windows during the install.
I'm running out of ideas - any suggestions please?
Message Edited by VARocketry on 01-09-2009 11:54 AM

Hmmm ... this is interesting. In review:
You can print intermittently from your XP SP3 box to the OJP L7680.
Disabling the SW firewall (Norton/Symantec, Zonealarm, McAfee, etc) on the SP3 PC doesn't help.
Other computers on your network have no problems printing to the OJP L7680.
You are running a wired (Ethernet) network.
Did I get this right? I'd like to ask a few more questions:
What are the other types of computers on your network and what firewall do they run?
The next time your XP SP3 computer has trouble printing to the OJP L7680, try to access the printer's internal web page.
What are the IP addresses of the other devices on your network? By chance, is there a duplicate address on your network?
Finally, you can try adding the print driver manually to see if we can get you printing. This is the sequence for XP:
Click "Start" button --> Printers and Faxes.
Under Printer Tasks, click "Add Printer".
Click "Next" button on the first Add Printer Wizard window.
If the option for Local or Network printer appears, select "Local printer attached to this computer" and deselect the "Automatically detect and install My Plug and play printer" option. Click "Next".
Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and configured. Click "Next" button.
Under "Add Standard TCP/IP Printer Port" enter the printer's host name (that is the hostname of printer that printed in network configuration page)
under "Additional Port Information" select "Standard". Click Next, and then click Finish.
Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
The Printer name will be highlighted on the next window.
Click "Next" button.
It ask for the Printer name -- leave it as is.
Select "Yes" option for making the printer default.
Click "Next" button.
The Printer Sharing dialog box will open.
Click "Next" button.
The Print Test Page box appears.
Select "Yes" option to print a test page.
Print Test Page.
Completing the Add Printer Wizard box appears.
Click "Finish" button and wait for the files to copy
This should work to get you a print queue for your XP box.
Regards / Jim B
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

How can I detect that a device is from Motorola !

hi all !
I want to detect if my device is a Motorola one, to do so, I was checking the class com.motorola.extensions.ScalableImage, if it's present I know that the device is a Motorola.
but, now, I have some devices (V8) that didn't support this class, so how can I do otherwise ?
I saw that there's an API named get URL from flex, but i don't now more about !
some one can help me ?
Regards, Idir

check this out
// detecting NOKIA or SonyEricsson
                  try {
                           final String currentPlatform = System.getProperty("microedition.platform");
                           if (currentPlatform.indexOf("Nokia") != -1) {
                               return "nokia";
                           } else if (currentPlatform.indexOf("SonyEricsson") != -1) {
                               return "SE";
                  } catch (Throwable ex) {
               // detecting SAMSUNG
                  try {
                           Class.forName("com.samsung.util.Vibration");
                           return "samsung";
                  } catch (Throwable ex) {
               // detecting MOTOROLA
                  try {
                           Class.forName("com.motorola.multimedia.Vibrator");
                           return "motorola";
                  } catch (Throwable ex) {
                           try {
                               Class.forName("com.motorola.graphics.j3d.Effect3D");
                               return "motorola";
                           } catch (Throwable ex2) {
                               try {
                                        Class.forName("com.motorola.multimedia.Lighting");
                                        return "motorola";
                               } catch (Throwable ex3) {
                                        try {
                                            Class.forName("com.motorola.multimedia.FunLight");
                                            return "motorola";
                                        } catch (Throwable ex4) {
               // detecting SIEMENS
                  try {
                           Class.forName("com.siemens.mp.io.File");
                           return "siemens";
                  } catch (Throwable ex) {
               // detecting LG
                  try {
                           Class.forName("mmpp.media.MediaPlayer");
                           return "LG";
                  } catch (Throwable ex) {
                           try {
                               Class.forName("mmpp.phone.Phone");
                               return "LG";
                           } catch (Throwable ex1) {
                               try {
                                        Class.forName("mmpp.lang.MathFP");
                                        return "LG";
                               } catch (Throwable ex2) {
                                        try {
                                            Class.forName("mmpp.media.BackLight");
                                            return "LG";
                                        } catch (Throwable ex3) {
                  } pravin

TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device. The rest of the screen is blank; all menus are blanked out. What do I do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

The operating system can not detect my wireless device!

Hi all,
I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Setup can't detect network printer Photosmart C7250 all in one

I volunteer for our local historical society. The person who did a lot of the computer maintenance work is not active at this time so I’ve begun to look at things.
There is a Gateway PC running Windows 7 64 bit home premium, a Sony Vio laptop running Vista 32 bit home premium, an HP Laser printer and (of most importance here) an HP Photosmart C7250 All in one printer.
Internet connectivity is via a dsl line with a combination modem/router. I think the modem/router is a Westell or an Actiontec through Frontier Communications (formerly Verizon in this area) but I’m not sure and I’m not at the museum now.
A couple of weeks ago I was able to connect the laptop to the network via wifi. My next step is to connect the laptop wirelessly to the printer so we can print wirelessly over the network. The printer was originally set up through a usb connection so I changed it to a wired Ethernet connection. The PC now successfully prints to the printer over the network. I downloaded the software and drivers directly to the laptop from the HP site and began the installation. When it got to the point of finding the network printer the software couldn’t detect it. I then put in the ip address for the printer (from the network info printed out from the printer) and it still couldn’t find it.
This same situation occurred when I tried to set it up on my personal laptop (Win7 , 64 bit) as well. Setup couldn’t detect the network printer, even after searching for the network ip address.
Since the printer is connected to the network (router) via an Ethernet cable, I don’t have the wifi radio turned on in the printer. This shouldn’t make any difference.
I’ve searched the forums and haven’t seen anything that is like my issue.
I don’t what else to do. Hopefully someone will give me some advice on what to do next.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
If the network has Wireless Isolation turned on it will prevent wired devices from seeing wireless devices. Do you have access to the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

ITunes 12 can't detect iPhone 5 device

I've been connecting to the iPhone fine for days but ever since the iTunes 12 cam out my Mac can't find my iPhone. It may not be able to find any other similar devices but all I have is an iPhone, no iPad or iPod or anything. The keyboard and mouse through another USB port work fine.
Yes I've tried turning both the MAC and the iPhone off and on again separately a couple of times. It's not asking me to verify "whether I trust it".
The only temporary fixes I've found involve reverting to iTunes 11. However, all the guides for this strongly recommend backing up first. I don't have a MAC formatted hard drive to back up to and so this would take a couple of days to do as I'd need to obtain one. No fix at the moment and it's just stopping me from doing any development because XCode also relies on iTunes for finding devices.
OSX 10.9.5
iPhone 5 MD298B/A
iOS 8.1 (12B411)
iTunes 12.0.1.26
Thanks in advance
Ben

If you are using Mac:
01- Quit iTunes 12 and unplug your iPhone.
02- Download iTunes 11 at http://support.apple.com/kb/DL1774
03- Download Pacifist http://www.macupdate.com/app/mac/6812/pacifist
04- Hold down ( Command + Shift + G ) and a screen will pop-up.
05- Key in this ( ~/Music/iTunes/ )
06- Find a folder called ( iTunes Media ) and move this folder into your Desktop. Do not delete this. This is your music library.
07- Launch your Pacifist app.
08- Open your downloaded iTunes 11 but don't install.
    When you opened your downloaded iTunes 11 you should be able to see 2 files,
    ( Read before you install iTunes.app ) file and ( Install iTunes.pkg ) file.
09- Drag the ( Install iTunes.pkg ) file to Pacifist.
10- Now you need to uninstall your iTunes 12 by using sudo code.
      Go to open your Terminal app.
           Type this: sudo killall iTunesHelper
                 Hit Enter/Return and ( if you have password it will ask you to key your password )
           Type this: sudo rm -r /Applications/iTunes.app
                 Hit Enter/Return
11- Now go back to your Pacifist screen.
          Select this ( Contents of Install iTunes.pkg ) and then click ( Install ) on top of the Pacifist menu bar.
12- You should see a message pop up and asking you if you want to install with Admin's privilege? Click ( Yes ).
          Another screen will ask you if you want to replace the files.... Select ( Yes ) to replace all the files.
13- Hold down ( Command + Shift + G ) and a screen will pop-up.
          Key in this ( ~/Music/iTunes )
               Delete this file ( iTunes library.itl )
                    Now move back your folder ( iTunes Media ) that you moved to your desktop.
14- Close all the screens now.
15- Open your iTunes 11. It should be at your Applications.
16- Plug in your iPhone and your iPhone should be appearing on your iTunes 11.
17- If yes, do a back-up.
          After finished back-up now check your iTunes for updates and you can go ahead to update your iTunes to iTunes 12 and
               everything should work like normal again.
Please let me know if this help!

Can IPhone/IPads use printer hooked up to Airport Express or Extreme?

I can't detect my printer on my mobile devices when selecting the print option. Is it just not possible?

I believe it only works with AirPrint enabled printers.

My system can't detect Videocam thru firewire

I have tried to connect my videocam to my PC thru firewire.
After connect, I on my Videocam (set to video mode) but XP can't detect any new device. ???
I have tried lugging the 6 pin firewire to the back of the CPU and also onto the optional IEEE 1394 connectors using the IEEE1394 bracket.
I have check the BIOS and the IEEE1394 is ENABLED.
When I view the network connection under LAN or High-Speed Internet, the 1394 connection shown
Connected, Firewired
1394 Net adaptor
My Videocam is JVC GR-D270.
I currently do not have any software to capture the video other than window movie maker.
Appreciate if someone can advise on how to go abt this problem.
Thank

Quote
After connect, I on my Videocam (set to video mode)
Did you already try ALL possible modes on the videocam? Did you check the videocam's manual that video mode is the correct setting for making contact with the computer?

Mx922 not working after ink changed. now computer can't find the printer! Help!

Computer said the ink was low. Changed the ink when it finally stopped because of an insufficent amount of ink. Now the computer can't detect the printer, let alone the ink change! I have read some other posts and tried to reset the drivers, that didn't work either. Now I can't even reinstall the drivers because the computer can't detect the printer. The printer is on and says that it's connected to the wireless network. It says my only other option is to connect via the USB, well Canon does not provide this model with a USB cord. So what now I have to go out and get a USB cord so that I can use my EXPENSIVE printer! That is why I paid more, so I wouldn't have to use wires!
Please if anyone has any solutions that I have overlooked please tell me! I really need to print for work.

I had a similar issue with my new Macbook Air. I ended up going and finding the bluetooth preferences (/Library/Preferences) and deleting them. Then I restarted. This time around it could see the printer.

Printer device group and a label format in SAP AII

Hello @ all,
I try to configure a SAP OER System with SAP AII. Now I should configure the label printing with the transaktion /AIN/ASGN_PRF_FORMAT. I must take a profile name, a printer device group and a label format. The problem is now, that I can't chose a printer device group and also I don't know the label format. Where can I adjust the printer device group and which label format must be in that field?
Can anybody help me?
Thank you.
Peter

Hi Peter,
SAP AII sends the label format filename as part of the Command message xml to the printer during tag commissioning.
I assume you have configured the label format filename for SAP_PRINT_PROFILE using transaction /AIN/ASGN_PRF_FORMAT - Assign Format to Printer and Profile
Now you have to assign that profile to an ID type or GTIN, etc. using the menus under Profiles for Tag Commissioning and Label Printing.
Once this configuration is done, the xml command message containing the element WriteTagData is sent to the printer RFC destination configured against the Device controller as an HTTP message.
This command message will contain the label format and field names - value pairs as per the SAP_PRINT_PROFILE.

Can only print one page to the Adobe PDF printer "device".

When I print to the Adobe PDF printer device I can only print one document. When I print a second document I get the message "Adobe PDF Creation cannot continue because Acrobat is not activated." However, if I reboot, I can again print a single document.
I'm running Windows 7 pro-64 bit. I have Adobe Acrobat X pro, version 10.1.7 installed AND ACTIVATED.
Any suggestions for solving this damn headache would be much appreciated. I'm sure tired of rebooting to print PDFs.
George Sundell

OK, here are a couple of ideas to try....
Go to Help and try Detect and Repair.
If you have Acrobat, you can try to distill the document or try a Save As
[signature deleted]

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

Standard practices:
Restart the device (power off completely, then back on) - retest.
Reset (hold sleep wake and home buttons until apple logo appears) - you can try this, but it is most useful when your device is frozen.
Restore to factory settings - retest.
Make an appointment at an Apple retail store genius bar if the above did not resolve the issue.
HTH.

Can't detect in printer device

Similar Messages

Maybe you are looking for