Can't detect webcam on EeePC 1025c

Laptop Asus EeePC 1025c, can't detect webcam.
No webcam at lsusb, can't find any references in dmesg, journal, lshw, rfkill, in BIOS, in /sys/.
Also, in many guides there is /sys/devices/platform/eeepc, but I have eeepc-wmi, and no "camera" there.
No camera, video or media at /dev/.
All information at http://dl.dropbox.com/u/34707423/logs/index.html
Kernel - 3.5.1-1, also try on 3.2.13-1.
I remebmer, that camera works few months ago.
Maybe it phisically broken?

Alber wrote:I haven't a EeePC 1025c.
But perphaps, it is disabled in BIOS, same place that wifi or bluetooth.
Something like "onboard devices configuration"?
Actually, it looks like it is not a USB device at all. I think the OP has it working now, the camera is found by the video for Linux infrastructure.
Edit: Sorry, I became confused. I thought cookies was the OP. Sorry about that.
Last edited by ewaller (2013-03-29 20:31:17)

Similar Messages

Mac OSX 10.5.7 Leopard can not detect webcam

Hello Support,
I am using Mac OSX 10.5.7 Leopard in Safari and FireFox however Flash Player v 9 and 10 does not detect my isight webcam (firewire). I can not even change my settings to choose a webcam because the image that I get when I go to the settings is just a screenshot but not interactive. I have attached the picture.
Does Flash player work in Mac OSX 10.5.7 Leopard Safari and FireFox? I get as far as the allow or deny button, then I get a error message saying that my cam is not detected.
Can you please advise.
Thanks in advance

Man... gmax3100 have a POOR opengl performance under Mac Osx Leopard in 2d. It is NOT my problem but it is a known problem. Try to run some benchmark with gma950 and gma x3100.
Macbook c2d 2.2 opengl performance x3100: 23.28
MacMini cd 1.6 opengl performance gma950: 184.76
it is a know problem:
http://lists.apple.com/archives/mac-opengl/2008/Jan/msg00025.html
http://forums.macrumors.com/showthread.php?t=446938
http://forums.macrumors.com/showthread.php?t=448571
http://forums.macrumors.com/showthread.php?t=403685
ecc.
exposè make 40fps and it is NOT fluid like a nvidia or ati card. Exposè is a simple animation, under arch linux and geforce3 (2001) is more more fluid respect leopard... and respect to tiger.
with this hack:
sudo defaults write /Library/Preferences/com.apple.windowserver Compositor -dict deferredUpdates 0
exposè is much MORE fluid so it is a driver problem (because with tiger there's no problem!!)
I have NO problem with my macbook.

Skype Can't Detect Webcam

hi i am using skype and suddenly my webcam stop works even the webcam marks gone i dont know what to do??even whe i touched the video call button its shows skype cant detect my webcam . what to do???thanks in advance

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Skype can't detect any webcam

Hi, Since I updated the newer version of skype 6.11, my video does not work anymore. When I go under options, I get the message, "skype can't detect any webcam". I have a built-in camera in my laptop using windows 7. I know my camera works, but I don't know how to make skype detect my built-in camera. So far, I can call people, I see and hear them and they can hear me, but they can't see me since I don't even have the options to put on my camera anymore. Please, can anyone help me with this issue? I have already uninstalled and reinstalled skype, but it does not work. Thank you

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Can't detect "creative webcam pro"

Hi,
can't detect "creative webcam pro",
Vector devices=CaptureDeviceManager.getDeviceList(null);
System.out.println(devices.size());
System.out.println(devices.elementAt(0));
i get:
1
JavaSound audio capture : javasound://44100
"java JMStudio" doesn't detect also.
win 2000, JMF2.1.1b(Java),JDK1.4.1.
can somebody help me?

Hi.
I have the same problem with my Logitech webcam. But i tried the registry scan and the webcam appeared. But: With CaptureDeviceManager.gerDeviceList(..) I get only 2 sound devices, not my vfw-webcam.
Any idea?
Greetings, Steffen

G400s after update Windows 8.1 the webcam can't detect

Hello,recently i want use my webcam but I realize my webcam cannot use, it says can't detect my webcam!
Last time can use webcam no problem,but after update Windows 8.1 the webcam cannot use.
I have problem with my webcam lenovo g400s for windows 8 64bit. And I search and check many solution on website or google.It not work, and my device manage >imaging device dint have webcam camera list inside
and also I already download last the camera driver for Windows 8 on lenovo download website there ( download.lenovo.com /express/ddfm .html )after install it with error "Not Appropriate Driver to be installed.
Please help

hi Rayman94,
Welcome to the Lenovo Forums.
Can you try the following:
- Follow this guide on how to show hidden devices on the device manager. When done, look under Device Manager > Imaging Devices or Other Devices and see if you can now see the camera or an unknown device.
- If you now see the Camera under Imaging Devices but is grayed out, try to right click on it > choose uninstall > delete the device driver then reboot the system. After the reboot, install the Camera Driver (AVC, Bison, Chicony, Lite-on) and observe.
- If you still can't see the Camera under Imaging Devices but you see an Unknown Device, follow this guide on how to identify it. Once identified, navigate to the C:\drivers\Camera Driver (AVC, Bison, Chicony, Lite-on)\HD folder and install the appropriate driver.
- Link to picture
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

just a summary...
i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
now, back to the topic..
so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
"4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
after reinstallation of itunes my DVD drive can be seen and just noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
so going back to the topic..
i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
so now i opened iTunes and BOOOM!
iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
[for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
and then you will see the screen below
click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
BUT the problem here is that your iPhone can't be detected on iTunes...
now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

Hi LSGZ,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
- Brenden

Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.

Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.I restore it and then it works for a while, but then a couple weeks later I'll plug it in and I get the same message again. It's very frustrating because even though I have all the settings to save to cloud, my apps and data don't all come back.

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

My Macbook Pro can't detect or read my CDFS file system external HDD

My Macbook Pro can't detect or read my CDFS file system external HDD

Open Disk Utility and see if the USB drives show in there. If they don't then it is a USB port or bus problem. If they do show in disk utility are they formatted in either Mac extended or a Windows format?

How can I detect a dialog and respond?

I'm having trouble doing something that's probably not that hard. I'm trying to "Print to PDF" a bunch of old AppleWorks documents. When you open a document created in AppleWorks v6 it opens right up, but when you open a document created in AppleWorks 5 you get a dialog box that says, "This document was created by a previous version of AppleWorks. A copy will be opened and "[v6.0]" will be added to the filename."
Right now I open the file and then:
tell application "AppleWorks 6"
        activate
        repeat while not (exists front document)
                delay .2
        end repeat
end tell
When the dialog box pops up, there's no front document so the whole thing freezes until you hit OK. How can I detect this dialog box and dismiss it?
Thanks
PS
When the box is open I ran this and got this result:
/usr/bin/osascript -e 'tell application "System Events" to get properties of windows of application process "AppleWorks 6"'
minimum value:missing value, orientation:missing value, position:436, 153, class:window, role description:dialog, accessibility description:missing value, focused:missing value, title:missing value, size:412, 123, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXDialog, selected:missing value, name:missing value, description:dialog, minimum value:missing value, orientation:missing value, position:8, 76, class:window, role description:floating window, accessibility description:missing value, focused:missing value, title:Starting Points, size:631, 189, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXFloatingWindow, selected:missing value, name:Starting Points, description:floating window, minimum value:missing value, orientation:missing value, position:4, 22, class:window, role description:floating window, accessibility description:missing value, focused:missing value, title:Button Bar, size:612, 51, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXFloatingWindow, selected:missing value, name:Button Bar, description:floating window

Hi,
The simplest would be to set the application preferences in the script.
Like this :
-- *** set prefs ****
tell application "AppleWorks 6"
      activate
      set oldPrefs to its preferences
      copy oldPrefs to tPrefs
      tell tPrefs
            set old version warning to false --doesn't show the old version warning alert
            set converted file suffix to true -- append “[v6.0]” to documents converted from older formats
            set locked file warning to false
            set paint reduction warning to false
      end tell
      set preferences to tPrefs
end tell
-- *** end set prefs ****
--**** your script, example ***
set tfiles to choose file with multiple selections allowed
tell application "AppleWorks 6"
      repeat with i in tfiles
            open i
            tell front document
                  -- do something
            end tell
      end repeat
end tell
--**** end your script ***
-- *** reset prefs ****
tell application "AppleWorks 6" to set preferences to oldPrefs

How can I detect a certain text within a field within CASE using IF

Dear all,
for a transformation / generation of values receiving from R/3 into BW I try to
manupulate three fields. I have a problem detecting a string in a field.
I am using a CASE with several WHEN clauses on one field. Depending on the
value, an IF is integrated. There I look into another field evaluating, if it contains
a certain string. E.g. IF STRING CP 'xyz' OR 'abc'.
System gives error for the locigal expression. I also tried CS, but same error.
How can I detect a certain text within a field and which is the right logical
expression.
Many thanks in advance!!!
Claudia

Hi,
Folow the blow example...
May be it helps....
DATA: hex1 TYPE string,
hex2 TYPE string.
hex1 = 'FFFF'.
hex2 = '123FF'.
IF hex1 CP hex2.
ENDIF.
Cheers,
SImha.

How can i detect if my PC is not on Network..... Urgent Pls Help Soon !!!!!

Hello Everyone,
We all know whenever we try to connect to a PC which is not on network, we get UnKnownHostException etc..... by which we can detect that the corresponding PC is not an network(intranet/internet)
But when i send a msg from my PC to my PC, it works fine even if the network is down. I hv provided my PC's IP address instead of using localhost or 127.0.0.1 which reduces the possibility that the msg will not be traversed thru the network.
Any IDEA how this works.
Is There any possible way by which i can detect that my PC is not on network or the PC to which i'm trying to connect is not on network .......
Pls help me out, its really urgent as to be implemented in my Project
Thanks In Advance
Sahil Shaikh

Hello Surtee
I have developed a Messeging Service for the eCRM Apllication my company is developing and we r in the final stage of debugging.
Now whenever a user sends a msg to a PC which is not on network, the messaging service automatically sends an Offline mssg to that PC. But know i want ot distinguish wheather the PC to which i'm sending the msg is not on network or am I not on network based on this i need to perform diff. actions, hence i wanted to know that how can i detect .......
Pls see if u canhelp me out ......
Thanks
Sahil Shaikh

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden

Can't detect webcam on EeePC 1025c

Similar Messages

Maybe you are looking for