Can't Disable Midi Controller. Device In Use?

Im trying to use adobe audition 3.0.1 as an audio editor in ableton. The program launches fine but this error keeps showing up. I tried to just disable all my midi controllers but it doesnt seem like its possible. In SMPTE/MTC theres not an option to just select none. Also this is still a pain even if I just want to go in and make a quick edit to something and another daw is open. I have a bcf 2000 and the faders go bonkers when its re enabled. If theres no way to disable the midi controllers and surfaces is there a way to just clear the whole user profile?

Eric S 1 wrote:
Audition might be reacting to your external sound card being used by the other program. ASIO drivers for sound cards allow access by only one device at a time...
.... If Audition wasn't the first audio program opened then it will not be able to access the sound card.
Actually, that's not true at all as a rule. ASIO channels can be distributed amongst different software apps - it's physical devices that you can only run one of. I say 'as a rule', because there are apparently one or two drivers around that won't distribute ASIO channels properly, but these are mercifully rare.
And this doesn't apply to MIDI at all - that's an entirely different issue, albeit one that shares some of the same characteristics. I believe that there are a few MIDI-sharing apps around (look up MIDI-OX, MIDI-YOKE and things like that), and it's probably a bizarre combination of things like this that will solve your problem - if that's what it actually is. I'm only saying that because I have no idea what might actually be causing this at all, I'm sorry to say. These sorts of problems are usually best solved by somebody who actually knows about these particular interactions sitting down in front of the machine and actually sorting them out. They are not that conducive to remote troubleshooting at all unless somebody who has actually had that self-same set of symptoms, and solved them, comes along.
And on this forum, I'm afraid that's not very likely these days.

Similar Messages

Can I disable the wireless functionality and use Ethernet only?

Can you completely disable the wireless functionality and use the Airport Extreme Base Station as a wired internet router with integrated print server?

Yes. I do that. I don't use a print server but I was using that port for an HD. My AExpress connected to it is wired also.

Can I disable scrolling on a PDF using Acrobat X?

I am making an interactive portfolio and my links are able to navigate through the entire PDF.
Can I disable the user from scrolling through the PDF?

Not possible.

HT204053 How can I find out what devices are using my AppleID and the history of purchased items with my AppleID?

I have used my appeID to load some games to my son's friends iPod's and have found that the iTunes gift cards that were loaded under my ID have been used very quickly ($100 in 2 months) when I have not been downloading things. I have been told that the friend has been downloading games/music after I had put in my password to load something else.

We are fellow users on here and not Apple employees so have no account access.
You can see iTunes and app store purchases by going to the store for each and clicking Purchases on the right side.
You might want to consider contacting the store support staff at http://www.apple.com/emea/support/itunes/contact.html and request your account be locked for a period of time. You need to stop allowing uncontrolled access and that may be he bet way.

How can I disable my iphone with a computer using itunes?

How can I disable my iphonewith a computer using itunes?

Welcome to the Apple Community.
You cannot disable your phone using iTunes.
You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

23" Cinema Display: Can't disable MacBook display to use only the cinema?

Hi,
I just bought a 23" cinema display with the intention of using it exclusively while I use a wireless keyboard and just keep my MacBook closed. I notice that when I set the display preferences to "mirror," the quality of the cinema display reduces greatly, since it's only able to be set at the maximum display resolution allowed for the MacBook when mirroring. This seems to defeat the purpose of having the cinema display. So, I guess I have several questions:
1. Can I close the MacBook without it going to sleep?
2. Can I make the cinema display the primary display (with application menus, etc.)?
3. Can I disable the MaBook display and use only the cinema display?
Thanks,
Stew

1. Can I close the MacBook without it going to sleep?
No, but if the power adapter is connected, you can wake it with the external keyboard or mouse (make sure wake-up is enabled in the Bluetooth system preference), and it will continue to run with the lid closed.
2. Can I make the cinema display the primary display (with application menus, etc.)?
Yes. In the "Arrangement" pane of "Displays" system preference, turn off mirroring and drag the picture of the menu bar to the picture f the external display.
3. Can I disable the MaBook display and use only the cinema display?
Yes. Close the lid.

Can I disable the audio pitch adjustment when using frame rate conversion?

We have a mov file containing digitized film material with audio scanned at 25 fps (1 frame film for 1 frame video) while the film should be 18 fps.
So both video and audio are too fast.
Compressor provides the framerate conversion so source plays at x frames per second.
This works well for video but the audio slowed down remains the pitch it has in the original speed. A great feature but an unwanted result in this case.
Audio should be at a lower pitch since it was recorded too fast.
Can we disable the pitch adjustment, when using rate conversion, so the pitch is corrected (lower) as well?

Hi Jason
This does sound tricky - the only other suggestion that I can add to David's is to use the smallest GOP setting you can, I'm in PAL land so the default is 12frames but I push it down to 7, this forces more I-frames into your mpeg. It makes the file size higher but in a project your length it doesn't matter. Make sure you encode your audio to .ac3 (use the Dolby 2.0 preset in compressor). Although David's limit is 7.4, if I'm not playing back on a laptop I'll set my CBR to 8Mbps (in Compressor CBR is called 'one-pass').
Once you create your mpeg, play it back in Quicktime first to make sure there are no artifacts full screen (with Simulators reduced size sometimes artifacts exist in your orig mpeg that you may not notice).
Also as David said, DVDSP doesn't re-encode an existing mpeg so something else must be going on. Before you re-import your new mpeg, delete your DVDSP prefs and any menu mpegs that it has created.
If you have Toast, try just doing a Build, instead of Build & Format. This will give a VIDEO_TS folder that you can then burn in Toast. Use the Data tab and select DVD-ROM/UDF.
If this doesn't work I don't know what will.
Good luck!
B

Onscreen piano keys stuck when using midi controller

Hi,
I am using a Yamaha PSR-172 as my midi controller. I use SoundTech's Lightsnake as my midi-usb connector. It is supposed to power the Yamaha keyboard from the usb, but it doesn't; I still need to use the yamaha power adaptor. Anyway, my onscreen keyboard displays the notes I play on the Yamaha; they colour as I play them via the controller. Sometimes they continue to make sound after I have released them, and the onscreen keys stay coloured. The sound continues until I change instruments or close garageband. There is no problem with the Yamaha PSR-172 when I use it as a stand alone instrument. Any explanation or suggestion would be appreciated.
Thanks,
shirtless

crazymofo wrote:
No, I'm not using a sustain pedal. I'm using the Microkorg and the keys are pretty horrible (sticky and aren't that responsive), could it be this that's causing the notes to sustain indefinitely (until I press the key of the note that won't stop ringing)?
Yes, it could be that no note off (or similar/equivalent message) is being sent. You should watch your MIDI in/out on the right side of the display in the transport bar and assert if any message is being sent when you release the key. It could be that when you strike it a second time that the note off message is being sent, especially if the electrical contacts are dirty.
A new keyboard will probably solve that, yes. Unless it also has dirty contacts.
regards, Erik.

Can't get MIDI output running

Hi there,
I was trying to run Guitar Pro 5 through wine. When I couldn't manage to get sound output, I realized that I don't have any MIDI output at all (i.e. the problem is not wine-specific).
So I checked on http://www.midi-howto.com/ and tried ot follow the tutorial there. I probably should have the necessary alsa packages - but acutally there is no 'alsa-drivers' on the Arch-repositoriers and I could not compile the latest drivers from the alsa website. But as wav-sound is working fine, I assume that I have the drivers I need.
I made all entries at the /etc/modules.conf that the alsa website proposed for my soundcard (Intel OnBoard chipset using intel8x0m). Then I tried to modprobe the following modules by hand:
snd-seq
snd-seq-midi
snd-seq-midi-event
This creates the device files /dev/sound/sequencer[1,2] and the corresponding symlinks /dev/sequencer[1,2] but when a programm tries to use them or when i try to 'cat' them I always just get
/dev/sound/sequencer: No such device
Does anybody have an idea where the probleme originates and how I might solve it?

if the onboard soundchip is not able to play midi (most onboard sound hardware can't play midi) you have to use a midi-to-wav converter like Timidity++
edit:
I see you are from Germany, so have a look at the german wiki
http://wiki.archlinux.de/?title=Kategorie:Sound
Last edited by SiD (2007-02-09 09:20:39)

K8TM-ILSR how to disable raid controller in bios?

Hi,
I have a MSI motherboard K8TM-ILSR, and have 2 sata hdd’s connected.
I want to test my Maxtor hdd’s with the tool called “powermax” but this tool, don’t see my hdd’s
Because it’s on a raid controller. I have my hdd’s in non-raid , when I’m booting I see non-raid, but seems still not disabled.
Is it possible to disable the raid controller in the bios, or are there other ways?
The pata controller is used for my cd-rom and writer.
Please let me know.

You can actually disable the controller, but you cannot use the disks then.
I wouldn't try messing with your raid configuration, you may lose data doing so.
You can try the following: find someone with a mainboard that supports single SATA drives. Install one drive and set the bios setting of the mainboard to IDE for that channel. Now you must be able to use the Maxtor utility. Be aware NOT to let the tool make any changes to the disk. This goes for the mainboard's bios as well. Letting these things change anything to the disk, will cause data loss / distruction of your RAID configuration.
If you use these two drives in a non-raid mode, you will be fine doing this.

I have changed my Apple ID on my iPad, but my iPhone keeps popping up with the old ID.....how do I get all my devices to use the same ID?

How can I get all my devices to use the same Apple ID?

Different services on your iOS device (iMessage, Facetime, iCloud, iTunes and App Store) can be signed into with an Apple ID of your choice. Make sure you verify the settings for each device and that you are signed in to each service with the correct Apple ID.
I'll do an example for iMessage:
1) Go to settings on your iOS device
2) Select "Messages"
3) Select "Send & Receive"
4) At the very top you will see "Apple ID", by selecting your Apple ID, you will now have the option to sign out of messages with the current Apple ID, and sign in with the new one.
The steps for changing your Apple ID for other services will be very similar.
tHIS SHOULD BE VERY HELPFUL TOO YOU.

Mifi 4620L - how do I determine which devices are using my data?

I Have a couple kids connecting to our Mifi4620 and we keep going over our 20gb data limitation. How can I find out what devices are using data and when as we. As how much so I can track down my high data usage culprit?

I have made several comments on another forum about my high data usage. The forum name is "HIGH DATA USUAGE being used". One thing I have found effective in my trouble shooting is to make sure all devices are off and will not auto connect to the WiFi.
1. Turn on the WiFi and make a log of everything that you do and with a time.
2. turn on only one device and do what ever you want to use that device for. (ALL other devices off}
3. Wait about 5 minutes when finished and then turn the MiFi off.
4. Wait 5 to 10 minutes before turning the MiFi back on to make sure all data got registered.
5. Do these steps for each device and keep a log of sites visited and what was done on each device.
6. Log into your Verizon account and go to data then down nearer the bottom there is a box where you can select a device. Select the router phone number and it will give you a detailed listing of data usage and times. The time in the listing is the time the session started and will add all data used until the MiFi session is ended. If nothing is connected it will check about about every 160 minutes ( 2 hrs. 45 minutes) you will see a small data usage. If something is connected you will see data usage every totaled every 6 hours (approximately). By turning the MiFi off you can stop the 6 hour totaling and only total the session up to that time. Of course you have to wait long enough for their computers to get the total data usage. At one time I would have to wait 3 to 4 days for some of these to show up but recently it shows up within a couple of hours and has always been updated over night. I have been downloading the detail usage since every morning since August. I made an excel spread sheet that will total on a daily basis the total data used for a day when I do a copy of my download and paste it into my spreadsheet.
I hope this helps although you might want to read the other forum, You are not alone with a problem. I hope you can solve your problem and if you would not mind posting a reply to me as to what you find if you can solve your problem. I thought my problem was solved but it is back and I have run out of ideas as to what else I can check or change. Today I went to Sprint store and can switch to one of their plans and save $18.00 per month but the problem with that is that the Sprint connection is not quite as good where I live.

Hello Sir. This Is Nilesh B.Desai From India. Our Clients Need is Picture Should Not Be Download So How Can We Disable Keyboard Shortcut For That Website Only.

Hello...
We are In the Business Of developing Website and Software.. We Are facing A problem Regarding Download. Our Clients need is not to download or print a single picture from website. so need help how can i disable download or print by using keyboard or with use of mouse.. so need to block all keyboard shortcut for such website only.. so if it is possible then please help us. we will great thankful to you..
thanking You.
Nilesh Desai
Marketing Executive
WiseCom Technologies Pvt.Ltd.
Amadpore , Navsari, India

No, Firefox is user choice rules over the "wants" of individual websites as far as disabling contextual menus and the keyboard commands.
Placing a transparent image over the image will keep the less technical user from saving the main image. If they do try to save it all they'll get is the transparent image overlay.

How can i disable rotate view tool? But on the windows not macintosh

I am using a graphic pad, and seens two hours my computer started to work slower and after view moves rotate view tool start to run... how can i disable it? I am using windows 7.

it is photoshop cs4

How can I use my iPad 4gen as a MIDI controller?

Hello there,
I have the iPad 4 generation. I have been reading that it is possible to use my iPad as a MIDI controller to help me with making music on my Windows computer and want to do this. What I've seen on the Internet from other people, is that they use an iPad camera adapter with other cables to connect to their computers. I have a few concerns with this, one was that if it can only be done with jail breaking my iPad, if it does please let me know so I just don't try it. Another concern that I have, if i can actually do this without jail breaking, is that I have the new Lighting connection and I see people do it with the old 30 pin connection and want to know if I can still do it with this iPad.
If I there are adapters I can use with my iPad 4 generation can you help me out by telling what I need to buy to do this with my iPad.
Thanks,
Alan V.

Hi there,
At this time you cannot use your iPad as a display like you describe.
However, you can buy the extra Camera Connection Kit, to import video and pictures from some camera's and SD Cards.
I urge you to submit feedback to Apple:
iPad feedback
Nathan

Can't Disable Midi Controller. Device In Use?

Similar Messages

Maybe you are looking for