Can't dismiss error message in Mail

I tried to send a bulk e-mail from Mail and got an error message. From other discussions I've seen, it appears that the issue was that I tried to send it to too many people. The problem now is that I can't dismiss the error message.
The message reads: "Cannot send message using the server smtp.gmail.com:[xxxx]@gmail.com. The server 'smtp.gmail.com' did not recognize the following recipients:" and then it gives a long list of recipients. So long, in fact, that it goes past the bottom of the screen, but I can't scroll down to see what my options are. If I hit enter, it tries again and I get the same message.
I don't really care about sending the e-mail; I got it to go through in Gmail. While I can learn for future not to include so many recipients, right now I just want the error message to go away, but the e-mail itself cannot be closed, and it doesn't show up in drafts or outbox, so I can't delete it. Any ideas?

Never mind; found the answer here: https://discussions.apple.com/message/17965389#17965389.
Turns out all I had to do was disconnect from the internet and hit enter; it tried and failed to send the e-mail and then placed it in the outbox, where I deleted. Nice.

Similar Messages

Can not find some messages in Mail using search

I have some problems with Mail.app I can not find some messages in Mail using search, the strange thing is that sometimes mail search finds some messages, but after rebuilding spotlight index the search displays other messages with the all messages searched using same search criteria. I have also tried to delete Envelope index file from the Mail folder in usr/library and forced mail to import all mailboxes but it started to crash importing some of mailboxes - I deleted the messages from that mailboxes, imported remaining mailboxes and tried to rebuild mailbox, but everything without a successes. Any ideas how to solve it?

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

How can we trigger error message in BADI PARTNER_UPDATE

Hi All,
I have implemented a BADI PARTNER_UPDATE. In this I have validation ( Error Message ) on saving buisness partner.
It is giving the error message but it freeze all the fields. On pressing enter it goes for short dump.
In short dump it gives error The COMMIT WORK processing must not be interrupted.
Kindly suggest me that how can we pass error message and it also does not freeze the fields.
Regards,
Narendra Goyal

Hi Narendra,
How are you trying to display message.
Is it using message service class instance of message statement (which should not be used, as that is for GUI messages) or using collect FM or by adding to genil message class container.
Please try different approaches and see what works for you.
Thanks,
Rohit

How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?

How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.

You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model:          HL-DT-ST DVD-RW GH41N
Revision:          PQ06
Serial Number:          K3D9BH92251
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
HL-DT-ST DVD-RW GH41N:
Model:          HL-DT-ST DVD-RW GH41N
Revision:          PQ06
Serial Number:          K3D9BH92251
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          Hitachi HDP725050GLA360
Revision:          GM4OA5CA
Serial Number:                GEA534RJ06E63A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
OSXLION:
Capacity:          499.25 GB (499,248,103,424 bytes)
Available:          192.76 GB (192,758,513,664 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk1s3
Content:          Apple_Boot
Hitachi HDP725050GLA360:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          Hitachi HDP725050GLA360
Revision:          GM4OA5CA
Serial Number:                GEA534RJ06E63A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
OSXLION:
Capacity:          499.25 GB (499,248,103,424 bytes)
Available:          192.76 GB (192,758,513,664 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk1s3
Content:          Apple_Boot
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity:          2 TB (2,000,398,934,016 bytes)
Model:          WDC WD2002FYPS-02W3B0
Revision:          04.01G01
Serial Number:               WD-WCAVY7048785
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk3
Rotational Rate:          5400
Medium Type:          Rotational
Bay Name:          Bay 2
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk3s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk3s1
Content:          EFI
BU2TB-Time:
Capacity:          2 TB (2,000,054,960,128 bytes)
Available:          1.1 TB (1,096,926,654,464 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2
Mount Point:          /Volumes/BU2TB-Time
Content:          Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity:          2 TB (2,000,398,934,016 bytes)
Model:          WDC WD2002FYPS-02W3B0
Revision:          04.01G01
Serial Number:               WD-WCAVY7048785
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk3
Rotational Rate:          5400
Medium Type:          Rotational
Bay Name:          Bay 2
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk3s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk3s1
Content:          EFI
BU2TB-Time:
Capacity:          2 TB (2,000,054,960,128 bytes)
Available:          1.1 TB (1,096,926,654,464 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2
Mount Point:          /Volumes/BU2TB-Time
Content:          Apple_HFS
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD10EAVS-00D7B1
Revision:          01.01A01
Serial Number:               WD-WCAU43604330
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
Data:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          715.55 GB (715,549,786,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD10EAVS-00D7B1
Revision:          01.01A01
Serial Number:               WD-WCAU43604330
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
Data:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          715.55 GB (715,549,786,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1003FBYX-01Y7B0
Revision:          01.01V01
Serial Number:               WD-WCAW31850957
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk2
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 4
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk2s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk2s1
Content:          EFI
BUOSXLION:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          697.88 GB (697,881,690,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk2s2
Mount Point:          /Volumes/BUOSXLION
Content:          Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1003FBYX-01Y7B0
Revision:          01.01V01
Serial Number:               WD-WCAW31850957
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk2
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 4
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk2s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk2s1
Content:          EFI
BUOSXLION:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          697.88 GB (697,881,690,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk2s2
Mount Point:          /Volumes/BUOSXLION
Content:          Apple_HFS

How i can display default error message in alert window

how i can display default error message in alert window
i.e.,
i have a text field with datatype Alpha
if i am giving numbers.etc then it is displaying
FRM-50001: Acceptable characters are a-z,A-z and space
I want to display this message in alert window
please tell how to do this

In the on-error trigger :
Capture error_code and error_text in a variable.
Set the alert title to something meaningful.
Set the alert message equal to the captured error information.
Display the alert.
declare
v_alert varchar2(100) := 'ERROR' ; -- name of alert to use
v_title varchar2(100) := 'Error !' ; -- text to display as title
v_msg varchar2(200) := error_code || ':' || error_text; -- message to display
v_btn number ; -- button pressed
begin
set_alert_property( v_alert, TITLE, v_title );
set_alert_property( v_alert, ALERT_MESSAGE_TEXT, v_msg );
v_btn := show_alert( v_alert );
end;
----------

How can I view my messages in mail, I only can see incoming emails, but the the screen where the message must be visible is empty. Also attachements are nog visible. These messages are visible on my Iphone. thanks

How can I view my messages in mail, I only can see incoming emails, but the the screen where the message must be visible is empty. Also attachements are nog visible. These messages are visible on my Iphone. thanks

And attached is a screen grab showing selected e-mails in the Inbox...the white space below are e-mails too!

How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,

How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,
@ Alternatively purchase an Elements 9 or 10. Holding Elements13 but that needs OS 10.8 (Lion) and much of my data is in Appleworks, which is incompatble
Apologies if I am using this incorrectly. My first time here

Hi. Thanks for coming back to me. I am using Mountain Leopard (OSX 10.6.8). Had major problem and have re-formatted my H/D and re-installing software. Must have lost a file in the process. Would upgrade to Lion only I have a lot of vital data in Officeworks, but that is incompatible with Lion.

Can no longer access blueyonder emails on iphone.I get the following error message: The mail server 'imap4.blueyonder.co.uk is not responding', how do I fix pls?

Hi there
As I've mentioned above, I can't seem to access my emails from my blueyonder account on my iphone. When I first set up my account on the phone, I had no problems at all receiving emails. Then recently, just out of the blue I get the following error message: 'Cannot Get Mail, The Mail Server 'imap4.blueyonder.co.uk' is not responding. Verfiy that you have entered the correct account info in mail settings. I definitely have the right settings, I even checked with Virgin but they are not able to assist with my problem. Has anyone else experienced this problem, if so,how did you fix it? If you could explain in simple terms as I'm not tech savvy!
Many thanks!

http://www.apple.com/uk/support/iphone/mail/
work through this

Error message: have mail version 4.3 (1081/1084). Can't be used with mac/ox version 10.6.8. Help?

My son deleted the mail application. Tried to to re-install it from download version. Get error message: You have mail version 4.3 (1081/1084). Cannot be used with Mac O/S version 10.6.8. build 10K549. Any suggestions?

Hi ...
The Mail app is not available for downloading.
You need to reinstall the Mail app from your install discs.

Error Message re: Mail Version with OSX Version & Mail Won't Open

I have not upgraded my OS and have been with 10.6.8 (on iMac Intel 3.06 GHz) since it came out without any issues. However today, after using sofware update to install: Java for Mac OSX 10.6 Update 10 and Security Update 2012-004 (which I can't see how they would relate), I went to open Mail and got the following error message:
You can't use this version of Mail with this versio of Mac OS X
You tried to open Mail version 4.5 (1084/1085) in : /Applications/Internet/Mail.app (which is where I have had it forever)
it can't be used on this version of Mac OS X. Try opening the version of Mail located in the Applications for on your computer. For more information, click the Help button (which it stated upon clicking that it could not be accessed).
Also, though I don't think this could be related - for about a month now, iTunes keeps asking me to enter my password (apparently not recognizing that i never logged out) - however if I just dismiss the request 2-3 times I can look in the menu and the log out option is available - weird.
I see others have intermittently had this problem and as I said I have not added or upgraded any software and I am not using iCloud. I performed disk repair and permissions, cache cleaning, corrupt preference files etc, using Applejack but it did not resolve the issue. Any help would be greatly appreciated - while I can get to my mail through other avenues it's not nearly as convenient. Thanks.

Resolved. Found another thread - had to move my Mail App back into the Applications folder and then re-apply Security update.

Error message in mail account

I have added my home email to my iPad and it is downloading the mail just fine but I can't open them because there's an error message popping up telling me my username or password is incorrect.
Clearly it's not as I can see my mail loading behind it. The error message won't let me"deal" with it, it won't respond when I tap on it?
What did I do wrong and how do I fix it?
TIA

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

Receiving bogus error message sending mail

Hello all,
I've configured an Exchange ActiveSync account on my iPhone 3GS to connect to my IceWarp mail server (I turned SSL off btw).
It connects fine, my IMAP folders sync beautifully and I can receive mail without any problems.
However, when I attempt to send mail using this account (either to an external address such as GMail or an address on our mail server) I get the following error message:
"Cannot Send Mail: An error occurred while delivering this message"
Then the message sits in my outbox.
HOWEVER... here's the kicker...
I actually receive the e-mail without any problems on my GMail account (or my own internal account I sent the test message to).
I don't know what's causing this incorrect error message to appear, but it's starting to drive me insane.
Any help on this would be greatly appreciated.
Thanks!

If anyone was still interested, the issue has been resolved.
It turns out, the iPhone was attempting to create a "Sent" folder and the mail server was claiming that the name was invalid. The server had a folder named "Sent Items" already on it to store the sent e-mails.
I re-named the "Sent Items" folder on the server to "Sent" and everything was fixed.

"No more virtual tiles can be allocated" error message

This posting was made in April of last year but I can't reply to it so I'll post it all over again.
I just installed CS3 and I get the error message "No more virtual tiles can be allocated" when I try to run certain filters like most of the "sketch" ones.
I've tried to increase the memory usage to 1380MB (80%), Cache levels to 8 and I still get the error.
What's a virtual tile and how can I allocate more?

I had this on my Win 7 x64 machine. Just found a solution/workaround.
This machine had a single partition/logical drive C: and so was the swap location. The problem was circumvented by running in Admin mode but this causes other issues with registry and the IT team if you have to listen to one.
I stopped the error.
But all I did was shrink my main partition and add a small partition so I have two local physical drives.
Now understand I did NOT tell PS to use that drive for anything. But it does create a temp file on the new logical drive call "300017921_MVM_0.tmp" when I do a distort lens correction.
Very interesting. It NEEDS a second drive, and uses it without being told.
https://www.adobe.com/cfusion/entitlement/index.cfm?e=ca&returnurl=http://forums.adobe.com /adobe_login&loc=en

"No error" message on mail

Each time I try to open an email from Apple to track a package, when I click on the tracking nummber, a blank white page opens with just the 2 words "No error" at the top. I was able to open the site prior to recently. Does this mean the site is actually down or that something is wrong with my mail setup?
Thanks

I think I discovered the answer which, if true, was a real coincidence. Just at the time that I was getting the "No error" message each time I tried to go into the tracking site, I noticed that the Apple Store was down. As soon as it came up, I was able to get into the tracking site. I am sure this was the problem but it sure was strange how everything came together.

TS3694 how can i overcome error message 1015 which pops when trying to restore an iphone 3g?

While doing a restore of my 3g iphone, i get error message 1015, and the phone is frozen at the loading mode. can someone help me fix this problem with a windows 7 ?

Joebats709 wrote:
... i get error message 1015, ...
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Can't dismiss error message in Mail

Similar Messages

Maybe you are looking for