Can't display image on TV from MacBookPro (using DVI to video adaptor)

I purchased the apple "DVI to Video Adapter" to be able to use my TV as a display, but it isn't working despite help from the Apple help desk.
I'm using a standard TV video cable that plugs into the yellow video input jack, with is a Hitachi full multi-system C2578FS that works anywhere in the world. Before my iBook died last year, I used to watch movies from it on the same television using a similar setup (just VGA instead of DVI adaptor).
The television is not receiving the signal in any way. My MacBookPro is: the 'detect displays' when activated in my MacBook Pro's menu bar shows a display it calls "NTSC/PAL" which is the television, and I've tried each of the different settings to no avail.
Any ideas on how I might finally watch a movie or slideshow on my television?
Kind regards in advance,
-ck-

After much fiddling with display resolutions and TV setting, and several calls to Apple help, problem was found to have a really basic solution: replace the RCA connector cable. The old one was shot.

Similar Messages

How can I display images in drop down.

Hi All,
How can I display images in drop down.
<select><option>image here</option></select>
please reply soon.
anser please
Thanks

I have not found html forum..That's just incredible.
where can i find it ?Sorry, I'm still recovering from that remark.
please reply soonEvery time you end a post with this, or "urgent" or other such keywords, the forum automatically introduces a 5 minute delay so that will actually make the whole process slower (not faster).

I have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY?

i have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY? for example if i trust that image on particular page doesnot contain any adult material and safe to see that page from home, can i temparory view image on page?

-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to Tools Menu -> Options -> Content -> click '''Exceptions...''' button infront of '''Load images automatically''' -> type the address of the website on which you want to load images e.g. yahoo.com and click '''Allow''' button -> click Close
-> Click OK on Options window -> Restart Firefox
Check and tell if its working.

How can I assign image file name from Main() class

I am trying to create library class which will be accessed and used by different applications (with different image files to be assigned). So, what image file to call should be determined by and in the Main class.
Here is the Main class
import org.me.lib.MyJNIWindowClass;
public class Main {
public Main() {
public static void main(String[] args) {
MyJNIWindowClass mw = new MyJNIWindowClass();
mw.s = "clock.gif";
And here is the library class
package org.me.lib;
public class MyJNIWindowClass {
public String s;
ImageIcon image = new ImageIcon("C:/Documents and Settings/Administrator/Desktop/" + s);
public MyJNIWindowClass() {
JLabel jl = new JLabel(image);
JFrame jf = new JFrame();
jf.add(jl);
jf.setVisible(true);
jf.pack();
I do understand that when I am making reference from main() method to MyJNIWindowClass() s first initialized to null and that is why clock could not be seen but how can I assign image file name from Main() class for library class without creating reference to Main() from MyJNIWindowClass()? As I said, I want this library class being accessed from different applications (means different Main() classes).
Thank you.

Your problem is one of timing. Consider this simple example.
public class Example {
    public String s;
    private String message = "Hello, " + s;
    public String toString() {
        return message;
    public static void main(String[] args) {
        Example ex = new Example();
        ex.s = "world";
        System.out.println(ex.toString());
}When this code is executed, the following happens in order:
1. new Example() is executed, causing an object to constructed. In particular:
2. field s is given value null (since no value is explicitly assigned.
3. field message is given value "Hello, null"
4. Back in method main, field s is now given value "world", but that
doesn't change message.
5. Finally, "Hello, null" is output.
The following fixes the above example:
public class Example {
    private String message;
    public Example(String name) {
        message = "Hello, " + name;
    public String toString() {
        return message;
    public static void main(String[] args) {
        Example ex = new Example("world");
        System.out.println(ex.toString());
}

How can I display images that are not included in any collection?

How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.

Thank you! Good idea! I ordered letters of the alphabet (space separated), and it works.

How can i display image in RTF template when Oracle Apps running in Windows

Can any body help how can i display image in RTF template when oracle apps running in Windows Server.
Thanks
Ravi

Hi Ravi,
You can add images into your rtf template using MS Word Insert Picture feature.
Did you try this method?
Thanks
Ravi
[email protected]

How can I display the HTML page from servlet which is called by an applet

How can I display the HTML page from servlet which is called by an
applet using the doPost method. If I print the response i can able to see the html document. How I can display it in the browser.
I am calling my struts action class from the applet. I want to show the response in the same browser.
Code samples will be appreciated.

hi
I got one way for this .
call a javascript in showDocument() to submit the form

How can I display JTextFields correctly on a JPanel using GridBagLayout?

I had some inputfields on a JPanel using the boxLayout. All was ok. Then I decided to change the panellayout to GridBagLayout. The JLabel fields are displayed correctly but the JTextField aren't. They are at the JPanel but have a size of 0??? So we cannot see what we type in these fields... Even when I put some text in the field before putting it on the panel.
How can I display JTextFields correctly on a JPanel using GridBagLayout?
here is a shortcut of my code:
private Dimension sFieldSize10 = new Dimension(80, 20);
// Create and instantiate Selection Fields
private JLabel lSearchAbrText = new JLabel();
private JTextField searchAbrText = new JTextField();
// Set properties for SelectionFields
lSearchAbrNumber.setText("ABR Number (0-9999999):");
searchAbrNumber.setText("");
searchAbrNumber.createToolTip();
searchAbrNumber.setToolTipText("enter the AbrNumber.");
searchAbrNumber.setPreferredSize(sFieldSize10);
searchAbrNumber.setMaximumSize(sFieldSize10);
public void createViewSubsetPanel() {
pSubset = new JPanel();
// Set layout
pSubset.setLayout(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
// Add Fields
gbc.gridy = 0;
gbc.gridx = GridBagConstraints.RELATIVE;
pSubset.add(lSearchAbrNumber, gbc);
// also tried inserting this statement
// searchAbrNumber.setText("0000000");
// without success
pSubset.add(searchAbrNumber,gbc);
pSubset.add(lSearchAbrText, gbc);
pSubset.add(searchAbrText, gbc);
gbc.gridy = 1;
pSubset.add(lSearchClassCode, gbc);
pSubset.add(searchClassCode, gbc);
pSubset.add(butSearch, gbc);
}

import java.awt.*;
import java.awt.event.*;
import javax .swing.*;
public class GridBagDemo {
public static void main(String[] args) {
    JLabel
      labelOne   = new JLabel("Label One"),
      labelTwo   = new JLabel("Label Two"),
      labelThree = new JLabel("Label Three"),
      labelFour = new JLabel("Label Four");
    JLabel[] labels = {
      labelOne, labelTwo, labelThree, labelFour
    JTextField
      tfOne   = new JTextField(),
      tfTwo   = new JTextField(),
      tfThree = new JTextField(),
      tfFour = new JTextField();
    JTextField[] fields = {
      tfOne, tfTwo, tfThree, tfFour
    Dimension
      labelSize = new Dimension(125,20),
      fieldSize = new Dimension(150,20);
    for(int i = 0; i < labels.length; i++) {
      labels.setPreferredSize(labelSize);
labels[i].setHorizontalAlignment(JLabel.RIGHT);
fields[i].setPreferredSize(fieldSize);
GridBagLayout gridbag = new GridBagLayout();
JPanel panel = new JPanel(gridbag);
GridBagConstraints gbc = new GridBagConstraints();
gbc.weightx = 1.0;
gbc.weighty = 1.0;
gbc.insets = new Insets(5,5,5,5);
panel.add(labelOne, gbc);
panel.add(tfOne, gbc);
gbc.gridwidth = gbc.RELATIVE;
panel.add(labelTwo, gbc);
gbc.gridwidth = gbc.REMAINDER;
panel.add(tfTwo, gbc);
gbc.gridwidth = 1;
panel.add(labelThree, gbc);
panel.add(tfThree, gbc);
gbc.gridwidth = gbc.RELATIVE;
panel.add(labelFour, gbc);
gbc.gridwidth = gbc.REMAINDER;
panel.add(tfFour, gbc);
final JButton
smallerButton = new JButton("smaller"),
biggerButton = new JButton("wider");
final JFrame f = new JFrame();
ActionListener l = new ActionListener() {
final int DELTA_X = 25;
int oldWidth, newWidth;
public void actionPerformed(ActionEvent e) {
JButton button = (JButton)e.getSource();
oldWidth = f.getSize().width;
if(button == smallerButton)
newWidth = oldWidth - DELTA_X;
if(button == biggerButton)
newWidth = oldWidth + DELTA_X;
f.setSize(new Dimension(newWidth, f.getSize().height));
f.validate();
smallerButton.addActionListener(l);
biggerButton.addActionListener(l);
JPanel southPanel = new JPanel(gridbag);
gbc.gridwidth = gbc.RELATIVE;
southPanel.add(smallerButton, gbc);
gbc.gridwidth = gbc.REMAINDER;
southPanel.add(biggerButton, gbc);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(panel);
f.getContentPane().add(southPanel, "South");
f.pack();
f.setLocation(200,200);
f.setVisible(true);

Can I restore to Snow Leopard from Lion using time machine?

Can I restore to Snow Leopard from Lion using time machine? I did not make a new partition on my external HD. My reason for doing this is to import data from Quicken 2007 to Quicken Essentials and then upgrade back to Lion. Can I restart and hold down the "OPTION" key upon start up that will take me to Apple Recovery HD and recover from time machine? I'm a noob at these sort of things. I appreciate your comments and suggestions.

Probably not. See Kappy's going back to SL from Lion guide.

No display after sleep with macmini using DVI - S-video/composite under XP

Hi guys, I have installed XP on my mini. I have CRT TV so I'm using
DVI -> S-video/composite to output to my TV.
The problem is after sleep - there is no display (it's woking only after reset).
I installed the latest drivers from the mac os 10.5 DVD & updated the graphics driver from Intel.
Please help

Unfortunately, no answer, as I'm having the similar problem with a Samsung SyncMaster 215tw and a G4 Mini. It works with the DVI-VGA adapter and the VGA cable into the montor's VGA port. However, connecting with the G$ Mini's DVI port with the monitor's DVI port using a DVI cable doesn't work. I cannot figure out why this doesn't work.
The DVI cable is good and the monitor's DVI port is good, as the connection does work using my friend's Intel Mini's DVI port connected to the monitor's DVI port using the DVI cable.
The monitor is new, too, and otherwise works fine with my other Macs connected with the VGA port. (I've not tried the additional ports as yet.)
Although the monitor is supposed to synchroize automatically, I also tried manually presetting the G4 Mini to different resolutions, but that didn't make any difference. The screen remains black when it should be showing the booting Apple icon.
Any idea what is going wrong here, please, as it sounds as if this same thing occurs with various monitors?

How can i Display images with may own table

Hi
I want display images with my own table. How can I use in this query.
SELECT    '<a href="#" onclick="javascript:'
       || 'getImageHeight(''my_img'
       || '#ROWNUM#'');javascript:redirect'
       || '(''f?p=&APP_ID.:212'
       || ':&SESSION.:DISPLAY:NO::P212_IMAGE_ID:'
       || ID
       || ''');">'
       || '<img src="#IMAGE_PREFIX#edit.gif" '
       || 'alt="Edit"></a>' ID,
          '<img id="my_img'
       || '#ROWNUM#" src="#WORKSPACE_IMAGES#'
       || filename
       || '"/>' image
FROM wwv_flow_filesThanks
Nr
Edited by: user10966033 on Sep 28, 2009 1:41 PM

You don't use #workspace_images# since that is for STATIC files, not images in a table..
see this thread for help: Re: Display image from blob
Thank you,
Tony Miller
Webster, TX

Display image in flex from database

I am using flex and java and mysql,
I upload image file into database from flex application.Now i want to display image in my flex
RIA application from database.
How can i do that??
Thanks in advance!!!

"B.O.H.R." <[email protected]> wrote in
message
news:g91dr3$b0f$[email protected]..
>
quote:
> Ordinary Flex can't do this. You could probably do it in
AIR. There's a
> separate forum just for AIR applications.
>
>
> Could you precise which things flex CAN'T ?:
>
> 1. load image file from local disk and represent it as
an object in Flex
> app?
> 2. display image represented as object(created as above)
in Flex app?
> 3. transfer that object back and forth to database using
BlazeDS ?
>
> Maybe there are posibilitie to make workaround of some
inconviniences?
> I am asking becaouse I realy would like to create such
app in Flex.
Flex can create an AIR application.
But a swf file can't read from the local drive.
HTH;
Amy

Can We Display Image on Hieararichal Report on Each Line item

Dear Gurus ,
I have a Strange Requirement from the Client . They want to display Image on each line item of report with regard to Material in Hierarchal Sequential Report . Is there any solution for the same .
Thanks in advance
regards
Shankar

I am having a path which is stored in SAP database which i have fetched in the reported in both alv heriarchal and also in Alv Grid . The Image is stored from DMS . Now what i am doing is i am trying to load a excel file from program BCALV_BDS_UPLOAD and when i run my report and go to view and select Microsoft Excel option the I am getting an error Bad file format .
The Path is : SAPR3://SAPR3CMS/get/200/DMS_5FC1/DE72B28A5B76F0F1AF0000215E54283E/FM1E1085XX18W-001E.jpg
Can you please help me out in this .
Regards
Shankar

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

Display image in report from BLOB

Hi All,
i have one requirement i.e
i want to display image in a report base on condition
like if id =1 then firest image, id = 2 then second image and id =3 then third image
i have image in database in BOLB type
i need to display in report based on that condition
please help me this requirement is urgent
reg,
jell

just create a query like this:
select id, image_name, image
from tablethen your XML output would be like this:
<ROWSET>
     <ROW>
          <ID>1</ID>
          <IMAGE_NAME>kljkla</IMAGE_NAME>
          <IMAGE>Lots of characters that represents the BLOB</IMAGE>
     </ROW>
     <ROW>
          <ID>2</ID>
          <IMAGE_NAME>jdkwel</IMAGE_NAME>
          <IMAGE>Lots of characters that represents the BLOB</IMAGE>
     </ROW>
     <ROW>
          <ID>3</ID>
          <IMAGE_NAME>oled</IMAGE_NAME>
          <IMAGE>Lots of characters that represents the BLOB</IMAGE>
     </ROW>
     <ROW>
          <ID>4</ID>
          <IMAGE_NAME>mlish</IMAGE_NAME>
          <IMAGE>Lots of characters that represents the BLOB</IMAGE>
     </ROW>
</ROWSET>in your RTF you put this:
<fo:instream-foreign-object content-type="image/jpg" width="251.8pt" height="174.3pt" xdofo:alt="picture"><xsl:value-of select=".//IMAGE"/></fo:instream-foreign-object>the attributes width and height are optional

Can't display image on TV from MacBookPro (using DVI to video adaptor)

Similar Messages

Maybe you are looking for