Can't Display large total in Discoverer Plus

I am trying to display a large total (billions) in Discoverer Plus, however instead of displaying the actual number it displays "#######################". The number I am trying to display is 1,234,567,890. Other totals display fine, however they are only in the millions, not billions.
I am in Discoverer Plus so I can't change the cell/column size. I have also tried changing the font size to a much smaller size.
Any suggestions?
Currently Displays
Col_A
1,000
1,513
3,643
Total: ################
Need Displayed
Col_A
1,000
1,513
3,643
Total: 1,234,567,890

Thanks for the info John.
I'm using Discoverer Plus and don't have Discoverer Desktop, although our admin does. If he makes the change on Desktop will the change be reflected on Discoverer Plus as well?
I have tried a few different formatting changes in Discoverer Plus however my Discoverer Plus is down right now and can't get in to see if the change you recommended is available in Plus.
Again, thanks for the help...it is much appreciated.

Similar Messages

  • Creating Total for Discoverer Plus 10 Cross Tab

    Hi Everyone,
    Any known issue in creating total for Discoverer Plus 10g CrossTab?
    My Total did not display any value when the there is more than 1 data to be summed.
    Anyone encountered this kind of problem before?
    Any feedback is greatly appreciated! Thanks
    Regards,
    Angeline

    If attempting to calculate sum as total, try cell sum... If datapoints are a mix of detail and aggregates, try neutral aggregate for detail or better still seperate aggregate from group by items (e.g. in a cross tab worksheet, keep dimensions on the left hand side or page item and only aggregable facts in the datapoint area). Hope this helps.

  • Total in Discoverer Plus

    I have created a report in Discoverer Desktop Edition
    (Version 4.1.44.00.00). The 'Person Code' column
    has 'Count Distinct Total' and the total has been
    displayed on the report. When I run the same report
    in Plus (Release 4.1.44.00.00) the total shows a blank.
    What needs to be done to correct this problem? Thank
    you in advance.

    Hi,
    Try changing the aggregation behaviour in Plus by going into Edit -> Worksheet Properties -> Aggregation (Last Tab) and select the last 'Show the sum of the values displayed in the contributing cells', this suppresses the action and allows totalling on mixed item/aggregate columns.
    Hope this helps,
    PJ

  • Total on Discoverer Plus

    I have a column of Total of all data poinst, and this total results ######## instead of the value in US$.

    Hi Daniela,
    Okay, I'm stuck... There must be some difference in settings between your installation of Viewer and Plus, or a difference in the workbook. The only thing I can suggest now is to find that difference.
    Anyone else any suggestions?
    Regards,
    Sabine

  • Field over flow can not display the total and subtotal in ALV

    hi
    i am running a z report with huge data in quality system.
    in 2 columns and not able to show the total and subtotal in 2 columns
    it says field overflow and cannot be dispayed.
    value is around 20character integer.

    You can create a domains with 20 positions and 2 decimal, for example.
    Than, associate this domain a data element.
    To finish assign that data element to the column you wanna sum.
    I hope help.

  • Can not display Chinese on discoverer plus

    i have moved this thread to this forum from discoverer.
    Dear,
    ebs 12.0.6
    OS OUL5x64
    AS 10.1.2.3
    using bi 10.1.2.3 with discoverer
    Discoverer Version:Server 10.1.2.55.26
    when connect to the viewer like
    http:10.10.10.10:7778/viewer
    it could display the Chinese character correctly
    when connect
    http:10.10.10.10:7778/plus
    the Chinese became square boxes.
    Please advise how to fix this error.
    Regards,
    Tom

    Hi Huusein,
    i found these file in application tier, they were all upper case.
    ALBANWTJ.ttf
    -rw-rw-r-- 1 oracle oinstall 18777080 Dec 29 2006 ALBANWTK.ttf
    -rw-rw-r-- 1 oracle oinstall 18676032 Dec 29 2006 ALBANWTS.ttf
    -rw-rw-r-- 1 oracle oinstall 18788548 Dec 29 2006 ALBANWTT.ttf
    copied them over and restart the opmnctl stopall and then startall but the discoverer/plus could not display Chinese, i then renamed it to lower case according with doc # Doc ID:      340944.1
    and restart the opmnctl again but it still could not display Chinese in discoverer/plus
    these files (5) from the doc 340944.1 but my actual from appl Tier only has 4 files with all upper case.
    AlbanWTJ.ttf
    AlbanWTK.ttf
    AlbanWTS.ttf
    AlbanWTT.ttf
    ALBANYWT.ttf
    can you please give me some suggestions.
    Regards,
    Tom

  • Totals not showing in Discoverer Plus - Urgent please

    Hi there,Thanks to all for helping on questions and sharing thoughts.
    I got a question from user in Discoverer plus, this is an urgent need.
    Actually they built report in Plus in Production based on 2 folders with few conditions and all, everything working fine and getting data.
    on one column in the report they need Total mean they used Sum but it is showing only lable not the value, like Sum:
    Even we tried Cell Sum, no luck, also I tested format of data and changed to NUMBER datatype, SHOW NULLS AS to 0,
    And also created calculation to avoid nulls like case statement if it is null then '0' otherwise that value and did Toal on Calculation column, still not working.
    I've seen in Disco Admin Dev/QA, that there is joins between these folders and i regarding getting data is not an issue from user I guess.
    Can anyone guide me or point me on this that would be greatly appreciated.
    Thanks in advance,
    skat

    Thanks for your response on this,
    I didnt get you, can you explain in brief.
    See to avoid null values I created calculation and used case statement.
    When I create total using SUM or Cellsum funstions it is not giving data it is giving only the label.
    one more thing this is, actually I saved that report on myid and was trying to play and when I try to keep only that column it gave me the result if i add other columns from other folder again getting the same issue.
    Any ideas or thoughts on this please.
    --skat                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to display binary file saved in BLOB column in Discoverer PLUS /VIEWER

    HI, Friends,
    I tried to display the binary file saved in the database in BLOB column with the *.doc or *.xls fomats, but it seemed not work at all. I can display them in discoverer DESKTOP, but not the web version PLUS or VIEWER. MY Discoverer PLUS/VIEWER version is 9.0.4.45.02 and the database is 9.2.0.4. Are there any special setting/configuration in somewhere (Discoverer administration/Applicaiton server/PLUS/VIEWER?)
    Any help /information will be greatly appreciated.
    Thanks a lot.

    Hi,
    Sorry but this feature is not available in the web version of 9.0.4.45. You will have to write your own mod_plsql function to download the file.
    Rod West

  • Discoverer plus running totals

    hi,
    any help will be appreciated.
    I use Oracle discoverer plus. recently I tried to build a running total (average) calculation using the template provided. I defined 10 previous observations for this purpose. discoverer performed the calculation but the problem is with the first 9 (in this case) observations of the new calculation, because it averaged the first first observation, than the first two, than the first three and so on. when you get to the tenth observation it becomes correct, but you can imagine it is problematic, especially the graphic presentation. if I could present the graph only from the tenth observation and on it would be an acceptable compromise. any other suggestions are welcome too.
    Thanks.
    Mark.

    Hi,
    I am afraid it is not at all clear what you are trying to do here. If you think of your results as a table of data do you want your calculation to be the same for all rows, a group of rows, or a running calculation changing for each row. Any graphical representation must be based on this underlying data.
    Rod West

  • Discoverer Plus crashes when saving large workbook.

    Hi all,
    We have a strange problem with a large 40 sheet workbook
    We can open and save the report back to the database in Discoverer Desktop 10 ok.
    However, there are problem in Discoverer Plus. I can open the report ok but when attempting to save it the browser seems to stall and after an amount of time an error appears saying 'Contact with the Discoverer Server has been lost. To continue your work please restart Discoverer Plus etc etc'
    Any ideas?
    rg

    After how much time the system is crashing?
    check in discoverer plus in Tools->Option->Query Governor setting of 'Prevent queries from running longer than', try increasing this value.
    Thanks.

  • How can I display the vendor associated with result of my running total sum

    I have a report that lists vendors with their most vecent order dates.  I need to set up a rotation so that the vendor with the latest order date is next to be selected.  I used the running total summary to pick the latest date.  How can I display the vendor associated with result of my running total summary?

    If your "latest" order date means the "oldest" order date, why don't you try this:
    Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
    This will make your oldest order your first record shown. 
    You can then create a running total count for each record.
    Lastly, in your section expert under conditional suppress X+2 formula, write this:
    {#CountRecords}>1
    The result will only show the oldest record in your report.
    I hope that helps,
    Zack H.

  • How can I display total playlist size in iTunes 11.  It used to be visible for each playlist or CD, but I can't find it now.

    How can I display total playlist size in iTunes 11.  It used to be visible for each playlist or CD, but I can't find it now.

    The Friend: Thanks from me too for that super simple fix!! I feel kinda stupid for not knowing that.
    Too bad Apple didn't:
    Give it a more intuitive name than "Status Bar"... "status" is what is shown at the top of the window along with the Artist and Song Title, e.g.; how far into the song/podcast/video I've played and how much is left,
    Put the keyboard commands in a more prominent place in their release notes when version 11 came out so we could more easily find the information they decided to hide in this attempt to make the desktop less cluttered and
    Allow us the option of displaying the data size along with the song count and duration just beneath the playllist title. The status bar is a redundant listing of information except for the data size!  Poorly conceived!
    Perhaps Apple will remedy this in a future release. For those of us who like to burn our playlists to CD, DVD and even a thumb drive this information is essential. WIthout it, we're left to guess whether a given playlist will fit on our target device.
    Thank you!

  • Can't Create Saved Connection in 11g (Discoverer Plus).

    We're getting ready to go live with a new installation of Discoverer Weblogic 11g, but we have run into a problem. We are getting errors when we have any user try to create a saved login connection from their login screen. We hit "Create Connection" and enter all the required login info (as we always did with our 10g version), but when we hit 'Apply' or 'Apply and Connect' we get the following errors.......
    A connection error.
    - Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
    - ORA-04063: package body "PROD_DISCOVERER_PS.WWSSO_API_PRIVATE" has errors ORA-06508: PL/SQL: could not find program unit being called: "PROD_DISCOVERER_PS.WWSSO_API_PRIVATE" ORA-06512: at line 1
    Users can login just fine when they enter all their info on the login screen, this is only happening when we try to create the saved connection. Is anyone else running into this on 11g? Is there a setting we are missing or something? Maybe something in the pref.txt file? Any help would be appreciated, especially since we are being asked to go live soon. Thanks!
    Here is our system setup:
    Oracle BI Discoverer 11g (11.1.1.4.0)
    Oracle Business Intelligence Discoverer Plus 11g (11.1.1.4.0)
    Discoverer Model - 11.1.1.4.0
    Discoverer Server - 11.1.1.4.0
    End User Layer - 5.1.1.0.0.0
    End User Layer Library - 11.1.1.4.0
    Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
    Java Virtual Machine:     Sun Microsystems Inc. 1.6.0_29
    JVM Memory Available:     9046KB out of 37372KB
    Operating System:     x86 Windows XP 5.1
    Using protocol: RMI protocol over JRMP transport

    Additional info:
    Based on the error messages, we can see something is wrong with the package being called. We had a long running help ticket with Oracle opened, but in our opinion, it was not really resolved. We provided the following info after a request from Oracle....
    The package does exist. The package is valid but the package body is invalid due to missing dependant objects
    It is owned by PROD_DISCOVERER_PS.
    The database version is 11.2.0.1.0 (64 bit)
    SQL> select OWNER, OBJECT_TYPE
    +2 from all_objects+
    +3 where object_name = 'WWSSO_API_PRIVATE';+
    OWNER OBJECT_TYPE
    PROD_DISCOVERER_PS PACKAGE
    PROD_DISCOVERER_PS PACKAGE BODY
    We have tried to recomplie the package, still invalid.
    After some further questions we were asked to provide info on the app_registry.......We got an error when trying that.......
    The app_registry object does not exist ...
    SQL> connect sys as sysdba
    Enter password:
    Connected.
    SQL> select comp_id,version,status from app_registry;
    ERROR at line 1:
    ORA-00942: table or view does not exist
    In the end (after a lot of back and forth), Oracle could not reproduce our problem on their test system. Because their test system uses Enterprise Edition and we installed Standard Edition, their solution was that the issue is caused because we are using Standard Oracle DB and we should be using Enterprise Edition. Creating a saved connection doesn't sound at all like something that would be affected by Standard or Enterprise edition. That's not an easy "solution" for us right now, and we can use a real fix. That's like taking your car into the shop because your blinkers don't work on your 2010 model car and the dealer's solution is "Oh, your 2010 car blinkers don't work? We have a 2011 model and they work just fine. You'll need to buy a 2011 car so the turn signals function."

  • I have a question about the new version of itunes. in the old version at the bottom of the sceen it display the total number of media and the size of the files. how can i get the new version to diplay this?

    in the old version at the bottom of the sceen it displayed the total number of media and the size of the files. how can i get the new version to diplay this?

    You're welcome. It was frustrating for me as well until I stumbled across "the fix"

  • Can we display only sub totals on the alv grid output

    hi,
    can we display only the subtotals calculated on the grid display.it should display all the data it shpuld display only the subtotals of it.
    if yes can any one please give me the code for
    will be awarded with points.

    Hi Raju
    You can do that
    When you are doing fieldcatalog,comment ws_fieldcat-do_sum = 'x'.
    if you comment that it wont display totals.
    use sort
    i_sort type slis_alv...
    clear ws_sort.
    ws_sort1-spos = '1'<position of field>
    ws_sort-fieldname  = 'matnr'.
    ws_sort-up = 'x'.
    append ws_sort to i_sort.
    pass this i_sort to FM

Maybe you are looking for