Can't display time position on playhead

I have iMovie 10.0.2 and Mavericks and I want to cut an hour long movie into about 5 min segments. I want to be able to browse the movie and find out where I want to split it, note the time positions, then import the 1 hour each time and delete the sections before and after my clip and save each one. But, I cannot display the time location with the playhead (as apparently used to be possible). There are no Advanced Tools, the Preferences consist of two minor items only. The video is of a talk so the there are no visual clues as to locations.
I have spend several hours reading discussions and the only solution seems to be to use a 3rd party app MPEG Streamclip which will cut my original video into clips. Surely this is not what Apple, iMovie expects me to do?

Ok, I had this problem just today and I came over here for help but realised I wasn't the only one but just then my EURAKA moment happened! Its there all this while and I have been missing it! The clip trimmer is also the time line stamp! So here is how I have just used it. I start to drag my video from the end using the yellow holder trimmer and the video length in time appears. The actual length upper on the whole clip and the split clip length on top top of the moving trimmer. I simply stopped at the time I needed to split at on the full clip time stamp and saved. I needed to split in to three small movies to I came back and this moved from the trimmer from the beginning to the mid-portion where my next video should start and then moved the end trimmer back to the desired length and so on. Now all done and uploading to youtube!
I hope this helps!!!

Similar Messages

How can Maximum Display Time in Chart Recorder be increased to hours/days?

Error message displayed when Recorder Display Time (X-Axis) is increased beyond ~0.25 hours, saying maximum display time has been reached. MUST be able to display time in range of days - although since data display rate (not Dasylab sampling rate, display rate separately controlled through pulse generator) is very slow (i.e. 1 sample/5 minutes, 0.0033Hz) total data quantity is not large.
Please help..there must be a way around this!! Thanks

The maximum display time in the Chart Recorder is based on a computation of how much memory is available to be allocated. The computation includes the block size, sample rate, as well as the amount of memory on the computer.
To display more time, you must reduce the amount of data to reduce the effective sampling rate being charted. You can use the Average Module or the Separate module to accomplish this.
There are some conditions where the actual sampling rate and the channel sampling rate are not the same - triggered data is an example of this, and data from the RS232 Input and ICOMS Input may be labeled in a way that leads the Chart Recorder to believe that the data channel has more data than it does.
Please provide more information about your application - what is the data source of the data that you are displaying, what is the sampling rate and block size? How much memory does your computer have?
--cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

This can't be right - can't display time part of a DATE field.

Hi all,
I have a table with one DATE field. It wasn't displaying times with the date,
so I searched and found a post telling how to change my NLS settings
in the Preferences.
I did this and it didn't change, so I thought, OK, I'll shut it down and restart.
Still no. So, I shut it down again, deleted all the records form my table, reinserted
them and then restarted SQLDeveloper.
Despite the fact that it has retained the change in NLS settings, it STILL*
doesn't display the time.
There is no problem in SQL*Plus. Quite frankly, this is poor.
Paul...

>
Would there by anything else - I'm planning on rebooting the machine this afternoon - maybe
that'll do the trick? Will report back.Now, this is still wierd! Have rebooted machine.
I have two tables Sysstat_ext and Sysstat - both have fields M_Time (Measurement time),
which is VARCHAR2(15) in Sysstat_ext and DATE in Sysstat.
Sysstat_ext is an external table pointing at a .csv file where the dates are strings (obviously) in
the format DD-MM HH24:MM:SI (i.e. 01-09 13:55:02).
I then insert the data from Sysstat_ext into Sysstat - the conversion being performed thus:
INSERT INTO Sysstat
SELECT ROUND(TO_DATE (Sysstat_ext.M_Time, 'DD-MM HH24:MI:SS'), 'MI') AS "Measurement Time",
<.. other fields deleted>If from SQL*Plus, I select M_Time from Sysstat
SQL> select M_Time from Sysstat;
M_TIME
2011 09 01 00:00:00
2011 09 01 03:20:00perfect
same for Sysstat_ext
SQL> select M_Time from Sysstat_ext;
M_TIME
01-09 13:55:02
01-09 14:00:01No year - the conversion during the insert obviously implicitly gives this year (good job that's what I actually want!).
I look at the dates in SQLDeveloper
Systat_ext: 01-09 13:55:02 <====== exactly what I'd expect
Systat: 01-SEP-11 <====== where has my time gone?
Anyone care to shed some light on this?
So, I redid the whole procedure removing the ROUND and also the AS "Measurement Time" (in case of artefacts)
INSERT INTO Sysstat
SELECT TO_DATE (Sysstat_ext.M_Time, 'DD-MM HH24:MI:SS'),
<... deleted...>
Still the same result - Sysstat_ext shows the time and Sysstat doesn't. I would have expected the
opposite. SQL*Plus still shows a time with Sysstat.
This is definitely a bug IMHO. Can I report it anywhere? As an aside, I originally thought that 3rd party tool
manufacturers such as Quest and Allroundautomations would be quaking in their boots with a
tool like SQLDeveloper (for free*) coming from the manufacturer of Oracle itself - I see now that
at the moment, they have little to worry about.
Paul...

Xml page can't display in the first time

Hi everyone:
I want to read data from MySQL to web page using JDOM.I read the data from database successful and insert them into a xml file.But I can't open the xml page property.It will display after I refresh the page more than ten times!
I find that it become easy if I use JDOM to do this work.I write the logic in a servlet:
/////////////////////////the servlet code is:////////////////////////////////////////////
     public void displayXml(){
          SAXBuilder build=new SAXBuilder();
          try{
          Document doc=build.build(new FileInputStream("C:\\tomcat\\webapps\\ROOT\\xmlbook\\mysql.xml"));
          Element root=doc.getRootElement();
          List books=root.getChildren();
          out.println("debug... ...");
          while(rs.next()){
          Element id=root.getChild("id");
          id.setText(rs.getString("id"));
          Element name=root.getChild("name");
          name.setText(rs.getString("name"));
          Element title=root.getChild("title");
          title.setText(rs.getString("title"));
          Element content=root.getChild("content");
          content.setText(rs.getString("content"));
          Element time=root.getChild("time");
          time.setText(rs.getString("time"));
          XMLOutputter xmlout=new XMLOutputter("",true,"GBK");
          xmlout.output(doc,new FileOutputStream("C:\\tomcat\\webapps\\ROOT\\xmlbook\\mysqlnew.xml"));
     }catch(Exception e){
          out.println(e.toString());
          System.out.println(e.toString());
//////////////////////////////index.html/////////////////////////////////////////////////////
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
     <head>
          <title>Enter the title of your XHTML document here</title>
          <link style="html/css" href="style.css" rel="stylesheet"/>
     </head>
     <body>
          <h2>welcome to here</h2>
          <form action="mainpageurl" method="post">
          <p><input type="submit" value="CliCk To EnTEr" /></p>
          </form>
     </body>
</html>
//////////////////////////mysql.xml////////////////////////////////////////////////////
<?xml version="1.0" encoding="ISO-8859-1"?>
<?xml-stylesheet href='mysqlxsl.xsl' type='text/xsl'?>
<rootpro>
     <id/>
     <name/>
     <title/>
     <content/>
     <time/>
</rootpro>
/////////////////////////////End code///////////////////////////////////////////////////
I add a hyperlink to the xml in a web page.It will go to the xml page when user click the button.
But there is a problem puzzle me.The xml page will not display when the user first to come this page.The browser report error:"Can't display this page.The xml file must have a top element".It can display after I refresh this xml page more than ten times.Why?But the xml page already have a top element!~.I means the client must refresh the xml page more than ten times for display it.someone know why? :(

sorry,My xsl file is:
////////////////////////////mysqlxsl.xsl//////////////////////////////////////
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:output method="html"/>
<xsl:template match="/">
<html>
     <head>
          <title>WelcomE To thE MainPagE</title>
     </head>
     <body>
     <table border="1" bgcolor="#eecc00">
               <tr>
               <td>User Information</td>
                    <td><xsl:apply-templates select="result/entry"/></td>
               </tr>
     </table>
     </body>
</html>
</xsl:template>
<xsl:template match="entry">
<li><xsl:value-of select="ID"/></li>
<li><xsl:value-of select="Name"/></li>
<li><xsl:value-of select="Title"/></li>
<li><xsl:value-of select="Content"/></li>
<li><xsl:value-of select="Time"/></li>
</xsl:template>
</xsl:stylesheet>
I want to transform the xml file using the xsl.

How can I display date+time and not the point number in excell?

Hi everyone,
Could anybody tell me how I can save date + time to a file, so that I can display on a diagram(excel) : date+time in (ox) and data (oy)? :
My program sets in (ox) the point number and not the date+time....( although date and time are written correctly in the column...)
Any help would be great,
Thanks,
regards,
Marc

hi there,
excel uses 01.01.1900 00:00 as the time offset, LabVIEW uses 01.01.1904 02:00, so you can't display the correct datetime in excel when you write the time as a fractional number of seconds from LabVIEW. you must format the datetime in LabVIEW to a string and write that to the column. use the "Format Date/Time String" - function and for example "%d.%m.%Y %H:%M:%S%3u" as the format string (see the functions help for more examples). you also could format your data to a string using "Format Into String" - function and write the file as a 2D string array. the decimal point you have to use depends on your system and its settings, but you can specify the decimal point in the Format string like "%.;%f" (means fractional number with point as decimal point).
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How do I display time remaining in a captivate published video so the learning can know how much time is remaining in a video

After I publish my video it just plays but there is no indication of how much time is remaining on the video while watching. How do I display this

It is possible, but you have to know 'time' is bit different, depending if you are talking about the 'editors' time or the real time spent by the the trainee. Have a look at this old blog post, that tries to explain:
http://blog.lilybiri.com/display-time-information
Time can show on the TOC (editors time), and if you have a playbar with a progress bar that gives some indication as well, but both for pure linear projects.

How can i display 5,10,15... records @ a time from a table in a DB?

well, i have developed a JSP application that shows ALL the employees in a certain department... the problem is when the number of employees increase the jsp page bcomes very, VERY long...
how can i do this by showing at least 20 records at a time... also like other jsp pages that i see that they have page numbers in the page above to show the other records... like...
page 1 20 records...
page 2, another 20...
... so on and so forth...
please help...
:]

Don't loop through the whole result set at once, just show records 1 to n....where n is whatever value you think creates a nice sized page. If you cache the results you can then display n+1 to 2n when the user hits a "more" link at the bottom of the page...and so on.
btw...caching may not be the best way to store your data, depends on the size of the resultsset, you may want to re-run the query each time and/or optimise the query to only fetch back the n results you want each time.
J.

If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?

If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?
for instance Keynote?

Welcome to the Apple community.
The Apple TV cannot display keynote presentations or websites from the computer. It can display them via mirroring from the iPad 2 or better or the iPhone 4S.
You cannot AirPlay to 2 Apple TV 2's at the same time from an iOS device. You can watch the same video, TV show or listen to the same music from your iTunes library on multiple Apple TV's at the same time.

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR

Can Iphoto display the date and time of a pic on the pic?

I know I can get info and see a pics info, but can Iphoto display the date and time of a pic on the pic itself?

Use the Photos->Batch Change menu option to set the Title to Date and Time. That will give you what you want under each thumbnail.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Can Web Intelligence display time in 24-hour clock format?

I would appreciate your kind help in answering this question: How can I change the time format in a formula so as to display time in the 24-hour clock format?
          Presently the CurrentTime() value format looks like this : 02:26:25 PM GMT-04:00
          Instead, I want it displayed in the 24-hour clock format like this : 14:26
I'm developing Web Intelligence reports in the BusinessObjects Enterprise XI 3.2 InfoView environment.
I searched several places for an answer to this question, but had no luck.
I searched the BusinessObjects Enterprise InfoView online help document (i.e., Web Intelligence Java Report Panel); I also searched two web sites: the Experts-Exchange website, and the BOB www.forumtopics.com website.
I figured out that there is built in conversion function FormatDate() that can convert a date value into a text value, as for example : FormatDate( CurrentDate(); "mmmm dd, yyyy" )
However, I have not found an equivalent time function that would convert a time value into a text value of a specified format.
Edited by: OSoccer on Jul 7, 2010 9:05 PM
Edited by: OSoccer on Jul 7, 2010 9:06 PM
Edited by: OSoccer on Jul 7, 2010 9:08 PM

Anil,
     Perfect; you answered my question!
     The only thing that I had to do differently was to leave off the quote marks from the string "HH:mm:ss" when I entered it into the Custom Date/Time box of the Number Format dialog window.
     While on this subject of the Number Format dialog window, I saw that the Date/Time box already held the following string value:
                FULL_DATE
     So, thinking that I should leave that value alone, I entered the string "HH:mm:ss" in the box labeled "Undefined" next to the Date/Time box, instead. That didn't work. It just caused the webi report to display the CurrentTime() value as a long date, like this:
               Friday, July 9, 2010
     So then I replaced the string "FULL_DATE" (without the quotes) with the string "HH:mm:ss" (first with and then without the quotes). In the first try, the report displayed the time as "14:20:34"; in the second try, the report displayed the time as 14:20:34.
     Questions:
     Can you please tell me:
     1. What is the meaning and usage of the label FULL_DATE?
     2. In my attempts to get the time formatted the way I wanted it to look, I filled the Properties list (of the Number Format dialog window) with junk labels such as those listed below. How can I delete these labels?
               FULL_DATE; "HH:mm:ss"
               FULL_DATE
               FULL_DATE
               FULL_DATE; "HH:mm:ss"
     3. What is the purpose of the box labeled "Undefined" next to the Date/Time box?

How can one display 1 record at a time

How can one display a single record at a time.
The next record should be displayed on the press of a button.
Thanks in advance

Vijaya,
I have 3 regions, each contains a check box item,
the label for which is dynamicaly generated through a SQL Select.
( &P1_ANSWER1. P1_ANSWER1 is the hidden item name)
In the Region Source,
I have put
SELECT col1 from (SELECT col1, row_number() over(ORDER BY col1) row_number from prototype) WHERE row_number = :P1_QUESTION_NO;
SELECT col3 from (SELECT col3, row_number() over(ORDER BY col3) row_number from prototype) WHERE row_number = :P1_QUESTION_NO;
for each of the reqion that contains these items,
Here the table is prototype and P1_QUESTION_NO is the hidden item.
As directed I have included under Processes (after submit and computations) on button "Next Record" clicked:
:P1_QUESTION_NO := ::P1_QUESTION_NO + 1;
When I am doing this, the label seems to blank out.
Thanks
Message was edited by:
faq123

Can we display Cube update time and date

Hi All,
can we display Cube refresh time and date for user with out going into the Cube properties. Can we use any substitution variable for that?
Another doubt----
Will there be any systen defined default substitution variable in Essbase or anly user defined variables. IF there what are they and purpose of it?
Regards

After the successful cube building, you can capture the time stamp from the system into a variable and you can set the note on database.
suppose below is the maxl script updatetime.mxl
login $1 identified by $2 on $3 ;
spool on to $4 ;
alter database $5.$6 set note $7 ;
logout ;
spool off ;
exit ;
you can call the script like
essmsh updatetime.mxl <<userid>> <<pwd>> <<server>> <<spoolfile>> <<appname>> <<dbname>> <<updatetime>>

Can we display date and time in a movie

I am filming a production process and would love to be able to display time of day as the video is playing.
I can see this info while editing, but I don't know if iMovie'11 will let me display this info onto the movie itself? I need to pass these clips to someone who doesn't have any editing tools, but they will be interested to review the events on the tape relative to the time of day that they occurred.
It would be cool if iMovie had a title effect that 1) displays time and date info, 2) let's the user edit the format of the displayed date and time, and finally, 3) lets the user move this title information to a location in the tape that won't obstruct the critical elements of the movie.

Thanks Appleman 1958!
This helps, but to your point, it doesn't show seconds, and it doesn't show frames (for the video purists out there).
Limited to no more detail than minute data, it is not too useful for me, but I could see this being fun in a fast motion shot.
Also nice for capturing day and time of day information for a vacation video.
For my application, all activity took place in 5 hours, and I would need to see down to the second (and ideally the frame) when specific actions took place.
It would be awesome if Apple would let us
1) edit displayed information (lets say for example turn off date, but show hours minutes seconds and frames)
2) edit the font & font size
3) allow flexible placement of the information window. The default location may be where major action is.
Again, thanks for pointing out this title!

Is it possible to disable the autodimm function, so that the clock can be displayed all the time?

Is it possible to disable the auto dim function, so that the clock can be displayed all the time?

At this time it is not possible. Sorry.
Being able to do so would dramatically decrease your iPod's battery life between charges.
B-rock

Can't display time position on playhead

Similar Messages

Maybe you are looking for