Can't do Publish/Publish Setting a movie in Flash CS3
I installed Flash CS3 while still keeping Flash 8. When I try
to publish/publish setting a movie, an alert pops up saying 'No
valid HTML Templates are available to complete this operation'.
Probably there was a conflict so I uninstalled both Flash
CS3, Flash 8 then installed Flash CS3 but the problem still comes
up. What is that?
Thanks in advance.
Hey,
First of all, thx for the answer.
The publish location is fine; it publishes to the same place,
like b4 the problem. Nice thought though.
What kind of problem could it have? And can it be fixed?
I've tried to rename it. Nothing.
It's a template that I've bought and I have the source file
in a ZIP, so every time it happens, after i've done some changes, I
copy them one by one, and then I publish it again and I'ts fine.
I'm sick of doing it...
What it be possible for you to check the file?
Thx,
Similar Messages
-
Can I select all flagged photos and move to a flash drive
Can I select all flagged photos and move to Flash Drive as a group rather than drag and drop one pic at a time?
Hi David,
One way you can do it is to create a Smart Album, and make the conditions = Photo Is Flagged. That will put all of your flagged photos into a single album. Then you can export that Album to the Flash Drive via File>Export. Once you set up the Export the way you want it, and then click on "Export" it will bring up your Finder Window, allowing you to select the Flash Drive to export to.
Hope this helps!
Cheers,
GB -
Centering a flash movie within Dreamweaver cs3 on Y axis
I have published a movie in Flash cs3 which has generated an html document however the Flash movie is not automatically centered I have attempted to centrally align the movie within Dreamweaver cs3 by adding:
<center> after the opening body tag and </center> befor the closing body tag
This method has centered on the X axis but not the Y axis
I would have put in a table or a div tag, but when I open the html doc in Dreamweaver I have no visible repressentation of the Flash movie in the design view as I would have if I had created an html document from scratch and draged the movie onto the page, all I can see is the "get flash" hypertext and some other text. I did actually experiment by creating a div tag and dragged my movie into it but ended up with two movies one sitting on top of the other when I ran it in a browser lol. I'm quite intimdated by code and much prefer to work in the design view (wysiwyg and all that) which is quite restricting.
Any advice for centering on the Y axis would be much apreciated, Thanks in advance, DaveI don't believe there is code to prevent this from happening
on a client computer. The default is enabled my Microsoft, what
should happen is a yellow bar should appear at the top of the
browser which will allow you view the content.
What might work is to use a program called Zinc by a company
call Multidmedia Limited www.multidmedia.com. Search the site for
samples, one of the samples is a Flash Browser this will run Flash
a browser that you can use. You will need to change the URL a bit
in the Flash code but it's very clear on how to do this.
What this will do is run your web site in a Flash browser I
did a quick test and I did not get any errors. The program will
create an EXE file. I also believe they have a MAC version if you
need one. With a simple "Autorun" call on the CD-ROM you could have
this up and running in not time.
Just be careful of how you call the pages. Since the web site
is not running from a Web server you need to make sure that your
links are local and not Site Root. The best way to test is to
disconnect your computer from your internet and see how it runs.
You want the CD to be self-contained and not have to get content
from the web (your end user may be on a laptop and not connected).
Good Luck -
Quicktime movie export from Flash CS3 is skipping frame.
When I try to export Quicktime movie from Flash CS3, the
resulting mov file is skipping frames. i.e.: The movie is showing
frame number 1, 2, 3, 4, 5, 6, 7, 7, 7, 10, 11, 12, 12, 12, 15
etc...
As you can see the frame number 7 is repeated 3 times and
frame 8 and 9 are nowhere to be found.
The last configuration I used is 960x540, Sorenson video 3
medium quality, 25 fps, keyframe every 25 frames. 6400 kbits/s.
I tried various configurations,with different codecs and even
with keyframe all frames and I always get simillar problems.
Anyone have an idea what is going on, and how to fix this?
Thank you,
Olivier.The QT exporter in Flash is honestly my least favorite
feature - not the feature itself but how it
works (or how it doesn't work in some cases). For me it is
almost unusable unless you have a very
short timeline, small stage, lower frame rate - like AS
generated effects or something - otherwise,
for true frame accuracy to video output - it is not reliable
enough and not fast enough for any real
world production environment.
So typically for me - I love SWF2Video (www.flashants.com) as
it takes any SWF and makes it into an
AVI that is frame accurate no matter what the frame rate is -
quite incredible - enough so that I
always felt it should have been bundled with Flash (as well
as Wacom tablets).
Harmony is an incredible product - as is SOLO and TBS (Toon
Boom mStudio) - each of those programs
are dedicated animation programs designed for output to video
- Flash has a lot of hats to fill and
it was never really designed for animation to video even
though many of us have found it suitable
for all intents and purposes as an animation program for full
production.
But all in all - the quicktime exporter doesn't really
deliver how we would expect it too I am sorry
to say - I only hope it works as well as it does on the Mac
(Mac users could always choose to export
to Quicktime Video but not PC users).
For now if I am exporting to video I keep it all on the
timeline or nested in Graphic symbols or use
the SWF2Video tool.
hope this helps.
-chris
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
OBastien wrote:
> Thank you for your reply Chris.
>
> I tried different possible solutions you listed but it's
not working.
> Disabling sound had no effects. Changing the FPS is not
an option, it has to be
> 25 FPS. I lowered the resolution to 300 something, it
seemed to be a little bit
> better, but it still dropped some frame, and the image
quality was horrible.
>
> I think it is really sad that we have to try different
settings in the hope
> that flash will grab all the frames. I'm really
disapointed in Adobe. I'm
> pretty sure it is the fault of Adobe and not Apple,
because I don't have does
> problems with Quicktime in ToonBoom Harmony. What is
strange is when I do an
> AVI export I never noticed a dropped frame. I'm not
using AVI video right now
> because I can not find a codec that gives me small size,
fast encoding times,
> the ability to seek in the movie by dragging the
timeline progress bar, and the
> possibility to edit in After Effects. If you know an AVI
codec that does all
> that it would be really great news.
>
> Thank you again,
> Olivier.
> -
Flash CS3- exported movie cuts off right side edge of my fonts
I made a movie in Flash CS3. The exported SWF shows that the right hand side of some of my letterforms (made from a non-converted font) are clipped off. Switching fonts produces similar results. Is there some glitch in the program that I am no aware of?
Thank you-Oh I see. No, it's just short words, upper and lower case. Nothing else as you described. The text was typeset in Flash.
I did some further testing, like switching fonts (again), enlarging the text bounding box, exporting the movie without anti-alias, converting the text to a shape (break apart twice), all to no avail. Most curious.
I should add that the text displays perfect in the .fla file. Just buggers up when I export to a .swf. -
How i can ristrict my BI Publisher report in Dashboards.
Dear All,
How i can ristrict my BI Publisher report in Dashboards.
I have different branches in my report .
I have to send my report split by branches and have to give security to that branch user.
Is it posible in BIP or i have to do in Data Base Level.
I need more information on dashboards
Regards
Subbu..Hi Subbu,
Apology for delay in reading your post.
Your needs and their solution are,
'split by branches ' - use bursting capability of BI Publisher
'have to give security to that branch user' - make out the report in specific folder and dashboard in BI Dashboard. Then give role based and grouped access to users to this Dashboard. For this navigate in BI Application to Settings > Admin > Manage Presentation Catalog. here you can setup dashboard specific security.
Cheers -
Can I download MS publisher to my Mac Book Pro?
I have a disc with microsoft publisher but the macbook pro won't read it.
You can't.
Microsoft Publisher works only on Windows PCs.
You can install Windows using Boot Camp (already on your disk) or via Apps like Parallels. If you consider doing so, you need a Windows CD with serial number.
In my humble opinion: don't do it, it's pain in the a..! -
Are there any apps in Staroffice that can open my MS Publisher 2000 files I have saved?
Thanks!If you want to switch from PC to Apple I recommend a programm like Parallels.
It has a tool (believe its called transporter) which runs on your current PC and creates a file (big) which is a "virual machine". It is a 1:1 copy of your PC which will run under parallels on your iMac.
You will be running your "old" PC as it was under MAC OS X while you run MAC applikations etc at the same time.
This is how I made the transition to Apple. -
Can one run Microsoft publisher on a imac without using a virtual software?
Can one run Microsoft publisher on a imac without using a virtual software?
You would have to use Bootcamp to install a full copy of Windows to run Publisher, or virtual software. There's no other way. Microssoft's native code is not compatible with Apple's OSX code.
Hope this helps -
How can I open Microsoft Publisher files
how can I open Microsoft publisher files?
Look in the box "More like this" here on right side of the page.
There are many answers. -
Windows 7 "Windows can't verify the publisher of this driver software"
I'm using windows 7 and I am trying to install itunes 10.5. I get "Windows can't verify the publisher of this driver software". When I select install this driver anyway, or don't install the driver, the install fails. I've disabled driver verifying in the bootup and also run the itunes installer as admin, at the same time. Still get the error. Help please.
Thanks Oliver, but did not work. Didn't have Apple mobile devices installed because I get the same problem when I try to intall that program that I get when attempting to install itunes.
-
After publish Android Application in Google Play Can't find any publish issue in app.
After publish Android Application in Google Play Can't find any publish issue in app. The Product ID is match, The Email Address in Folio Builder is match but is there necessary that DPS account have to match with Google Play Developer Account? Please Help
Are the folios published as Public? Are the folios free or retail? If retail, did you create an in-app billing Product ID in Google Play that is an exact match for the published folio? Is the "Title ID" you specified the same account you used to create the folios? Did you turn on Strict Renditions when you built the app?
-
How Subscriber Can Ignore Messages When Publisher
Hello,
I have a few subscribers to a topic, however those subscribers can also be publishers for messages.
Is there an easy way for a subscriber to ignore any messages if that subscriber is the publisher of a particular message?
Regards,
StoyanHi,
I don't see what getter I can use on the publisher to get its ID, also I don't see any ID
in the message that I can use. Would you be more precise about the IDs you're
referring to and how to extract them.
Thanks,
Stoyan -
HT5065 Can I hyperlink in iBook to a movie on another server?
I've been told I can not hyperlink in iBook to a movie on a different server if I publish my iBook in iTunes. Is this correct, please?
I was all set to celebrate as it seemed like this worked
perfectly, but I got actionscript errors like crazy in the new
file.
The only actionscript I'm using is 3 versions (1, 2, and 3)
of the following.
The error is:
The class or interface 'Timer' could not be loaded
and
a Type identifier is expected after the ':'
These errors don't happen in my original file.
Will continue to play with it...
this.stop();
var timelinePause3:Timer = new Timer(2000, 1);
timelinePause3.addEventListener(TimerEvent.TIMER,
timerHandler3);
timelinePause3.start();
function timerHandler3(evt:Object):void {
this.play();
} -
Flash cs3 crashes when I try to publish
Hello,
my flash cs3 is crashing every time I try to publish a file,
why? I run vista business 32 bit
I didn't have problems until today,using flash cs3 for the
last month
here is what the os says:
Problem Event Name: BEX
Application Name: Flash.exe
Application Version: 9.0.0.494
Application Timestamp: 46015140
Fault Module Name: Flash.exe
Fault Module Version: 9.0.0.494
Fault Module Timestamp: 46015140
Exception Offset: 00c5958f
Exception Code: c000000d
Exception Data: 00000000
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 1033
Additional Information 1: bd02
Additional Information 2: b71b5bf9ea5ff08d6fffcb887aba95ff
Additional Information 3: 1fd9
Additional Information 4: 0053c83f18f91bf1d56eaad6275e8c5b
Hint:
If I save the same .fla in another folder, flash cs3 doesn't
crash when publishing. why? this looks that is happening in the
root of the folderquote:
Originally posted by:
Newsgroup User
I Love Doing Websites,
> my flash cs3 is crashing every time I try to publish a
file, why?
That description is about as wide open as it gets! ;)
Troubleshooting
is often like a detective story: the more clues one has to
work with, the
more confidently one can begin the chase.
Well, my problem is that the cs3 starting to crash doesn't
really have an explanation for me. but I will put details here.
> I run vista business 32 bit
> I didn't have problems until today,using flash cs3 for
the last
> month
I don't have CS3 installed on Vista, so I'm afraid I can't
provide any
offhand suggestions. Since you haven't seen problems until
today, the first
thing that strikes me is: what happened with today's FLA that
was different
from your previous efforts? Did you import an unusual
external asset (even
if only unsual for you)? Maybe you imported a corrupted JPG
or PNG. Maybe
a bad font?
I did nothing with the fla that started the crash, I imported
some bitmaps and when trying to publish it, it crashed. Also, I
created another fla, imported some random jpgs 2 I believe, tried
to export it to the same folder, and cs3 crashed, saved the fla
with another name garbage.fla No fonts were used
> Hint:
> If I save the same .fla in another folder, flash cs3
doesn't crash
> when publishing. why? this looks that is happening in
the root
> of the folder
Believe me, I'd be asking these "why" questions myself in
your shoes.
What you're describing doesn't sound like a well known issue,
so my hunch is
that something is awry with this particular FLA file --
something not likely
to be easily reproduced. Since you can publish when saving to
another
folder, I would run with that workaround for the time being.
After saving
to a different folder, try using File > Save and Compact,
then move the FLA
back to your original folder and try again. Or ... try File
> Save As from
the new folder, and save the copy into your original folder.
In your duplicate post, you mentioned starting a thread of
your own
(this one) but not hearing any responses. Obviously, I can
only speak for
myself in this reply, but it may be that you didn't get
responses because
your question is on the vague side. It doesn't describe a
common issue
(like, for example, "Why can't I mask dynamic text?" [answer,
"Make sure to
embed your font outlines"]).
When I read these forums, I tend to skim the subject lines
looking for
descriptive summaries. Many people post questions like "How
did they do
this?" or "Help!" or "Flash question" ... none of which
describe meaningful
topics. In my opinion, your subject line is useful, because
it briefly
summarizes your question. That's a good thing. When I read
the actual body
of your post, though, I quickly realized there wasn't enough
(for me, at
least) to give you a solid answer. In this case, I've tried
to give you a
few pointers anyway, but I'm only hazarding a few "try this"
type
suggestions.
It may be that others who read your post felt equally unable
to answer
your questions with confidence -- at least, as stated.
Well, I did some research on the internet and there is a
quite more few people having the same problem, here is the other
forum I found:
cs3
flash crash when publishing
I am sorry that I didn't post any more specifications of what
I was doing, but what I was doing was not something different or
unusual of what I have been doing for the last week at least. I was
just working with dw and flash together importing the .swf into an
html and launching the html from dw.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."
Maybe you are looking for
-
Solaris 10 zone: root crontab deleted.
Hello, for a couple of weeks I have notice that one of our solaris zone has its root crontab deleted. the file root on /var/spool/cron/crontabs is simply gone. I have changed the password so it is somethign inside the OS which is deleting the crontab
-
InDesign exporting to PDF - .eps and .ai color issue
I've been reviewing a lot of help forums and have played with a lot of solutions and can't seem to fix this one. With no updates or changes to my usual settings I've noticed an issue with my company logo when I export to PDF from InDesign CS6. Once I
-
Returns of a substituted Material
Hi SAP Gurus I have a bit of a problem. We have set up material substitution rules that says if customers order Part A substitute with Part B. Because with have g ATP this comes as a subitem. Now my problem is that when I try and create Returns order
-
ITunes very slow when updating ID3 tags
Greetings, I've read about iTunes taking forever "processing file" when people have downloaded songs, but haven't seen a reference to this problem when changing the ID3 tags for songs within the program. Sometimes it will take many seconds to complet
-
How to embed a You Tube into webpage
Can anyone give some guidance on how to embed a You Tube video into your webpage?