Can't download or access MyBook WD3200 after Upgraded to Widows7

I backed up my computer before i did a complete Windows 7 Install.  I have tried using the disk, WD official downloads for actual model and new models as well as all the diagnostic tools.  The external Hard drive comes up as Initio Default Controller.  there is no access to any of the files through the initio device.  I've disabled it, ran troubleshooting and tried to update drivers.  I have the Power Cord plugged into the wall directly as well as the USB.  Nothing will work... the install won't install with a earlier version of Windows.  the upgraded version of my External Drives Software did Download with out problems but won't recognize my Device.  Dear Holy Mother of Sporks will someone Please Help me.  My whole life is on that little Black Box from the fiery depths of Elm Street ;

Welcome to the Community.
This is quite delicate. Maybe you should try contacting WD's Technical Support about this. You can do so either by phone or email.
To Contact WD for Technical Support
http://support.wdc.com/contact/index.asp?lang=en
Support by Country
http://support.wdc.com/country/index.asp

Similar Messages

  • I can't download the trial of Adobe After Effect CC, please help.

    I can't download the trial of Adobe After Effect CC. Its just opening the creative cloud when I clicked the download trial. Creative Cloud doesn't have the application. What should I do?

    Please use the Can't download trial | Akamai Download Manager
    Or you can try http://prodesigntools.com/adobe-cc-direct-download-links.html, do follow the " very important instructions" prior to downloading from here.
    Regards
    Rajshree

  • I cannot download or updates any apps after upgrading the newest ios .. it show offers In-Apps Purchase... anybody can help me ?

    i cannot download or updates any apps after upgrading the newest ios .. it show offers In-Apps Purchase... anybody can help me ?

    This is happening to me too. I'm looking for anyway to fix this its getting very annoying not being able to update apps.

  • HT1689 I redeemed a digital movie but have not downloaded it yet. How can I download or stream the movie after I've selected download later?

    I redeemed a digital movie but have not downloaded it yet. How can I download or stream the movie after I've selected download later?

    Hello geoff1718,
    The following article provides steps for downloading past purchases from the iTunes Store.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Cheers,
    Allen

  • Why can't i activate my iphone 3gs after upgrading it to ios 6?

    why can't i activate my iphone 3gs after upgrading it to ios 6?
    It says,
    ''There is no sim card installed in the iphone you are attempting to activate''
    Thanks for your help in advance!
    Kayl07

    There are several common causes for this problem:
    Your security software (Antivirus, firewall, router settings) is blocking access to gs.apple.com, Apple's activation servers. Try temporarily disabling your security applications on your computer.
    You have a redirect in your hosts file that defines a different IP address for gs.apple.com. you must delete all references to gs.apple.com from your hosts file (c:\windows\system32\drivers\etc\hosts, or /etc/hosts on a Mac)
    Your phone is jailbroken or otherwise hacked.

  • Why can't I open my numbers docs after upgrade to 3.0?

    why can't I open my numbers docs after upgrade to 3.0?  I have downloaded Maverick.  I had the same problem with Pages at first.  Is there any way to get my spreadsheets back?  I'm nervous about upgrades anymore.

    If you recently updated to Mavericks and updated the Numbers to  3.0 then it is likely you are trying to open a Numbers 3.0 file with Numbers 2.3.
    Numbers 2.3                              Numbers 3.0
    Be sure you are careful about which version you are launching and using to open files.  If you want to be able to open a file in Numbers 2.3 then you should continue using Numbers 2.3 (which is located in the folder "/Applications/iWork '09")
    If you already opened a Numbers file in 3.0 and saved if but want to open in 2.3 you can export from Numbers 3.0 by using the menu item "File > Export To > Numbers '09..."

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

    after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it?  thank you

    Hello pichastos,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • MacBook can't see my home wireless network after upgrade to OSX 10.8.5

    After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

    It appears an SMC reset was required:
    HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
    Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
    If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

  • On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

    On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

    I think you are sailing in uncharted waters with those kind of modifications.
    I am only guessing, but if you have not already done so,  do a PRAM reset and then trash your FCP preferences.
    Big Poppa Chris wrote:
    I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
    My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
    MtD

  • Why can't I use word, excel etc after upgrading OS X lion ?

    Why can´t I use word,excel etc after upgrading too OS X Lion ?

    Office 2004 is a PowerPC app that requires Rosetta to run. Roseeta and thus all PPC aps are not supported on Lion. Further Office 2008's Installer is a PPC app. Office 2008 will run if installed before installing Lion, but you cannot install it from Original Office 2008 Media after installing Lion.
    Steve

  • I can't activate my iMessage and FaceTime after upgrading to ios7? Help please!

    I can't activate my iMessage and FaceTime after upgrading to ios7? Help please! TIA

    Try this support document http://support.apple.com/kb/TS4268 for problems with activating iMessage and Facetime.

  • TS3649 Suddenly i can't export iPhoto slideshows to iDVD after upgrading to 10.8.2   I get the message "CouldNotCreateTmpDir"  What do i do to overcome this problem?

    Suddenly i can't export iPhoto slideshows to iDVD after upgrading to 10.8.2   I get the message "CouldNotCreateTmpDir"  What do i do to overcome this problem?  I've been making slideshows for ages using iPhoto and iDVD and it's suddenly stopped. Urgent help needed.

    Are you saying that you cannot export a slideshow from iPhoto to the Desktop and then drag it from the Desktop (or the Movie frolder where it can be stored) into an open iDVD menu window?
    Export the slideshow at the large or medium size:
    They drag the movie file into the open iDVD window.  NOTE: do not move the movie file once it's been added to iDVD. That's why it should be placed in folder where you intend to keep it permanently or at least until the iDVD project is completed and burned to a disk image and then to disk.
    OT

  • Can't access shared music after upgrading to 8.0.2.20

    After upgrading iTunes to version 8 on my mac, the shared music no longer appears. Has anyone else had this problem?
    The problem does not exist on iTunes for Windows 8.0.2.20 - I can still access shared music.

    Press the leftmost button out of the three in the top right corner of the window just above View.
    (39759)

  • Can't download Acrobat Adobe Pro XI after purchased. It's said it's not available after 60 days.

    Hi
    I just buy new computer and would like to download Acrobat Adobe Pro XI on my new computer. The staff said I can downloaded it twice for 2 computers for 1 purchase. But now I can't load the program to my new computer. It's said it has been after 60 days and I can't download it.
    What should I do?

    you can download the trial and activate with your serial number, https://www.acrobat.com/free-trial-download.html

Maybe you are looking for

  • Drag and drop in finder

    When i want to drag and drop files or maps in finder the finder screen is moving upwards and the files above aren't visible anymore. This happens since OS X Yosemite.

  • Sleep proxy Apple TV 7.0.2 not working

    Since my Apple TV automatically upgraded to 7.0.2, the sleep proxy doesn't work. Before, all my Macs (OSX 10.9,10.8 and 10.7) on my home network were displayed under Shared Devices in the Finder whether awake or Sleeping. Selecting one of the Macs au

  • Drawing TrendLines in Line Chart

    Hi, I am using a Line Chart in one of my projects. I use a HTTPService to fetch XML Data to feed the chart. <mx:HTTPService id="myServ" url="ChartData.xml" result="myResultHandler(event)"/> I draw two trend lines over the chart based on the max & min

  • SAP Cloud For Customer : Integration of Service Request to CRM  Issue

    Hello Team, We have CRM integration using HCI working for most of the standard objects running. But for "Service Request" we are not able to see replication initiating from C4C to CRM. We have setup the required Communication Arrangement and artifact

  • How to replicate applications

    Scenario: Two database servers with one schema to replicate from one server to the other (one-way replication). On both servers we have APEX set up. We can copy the applications (export/import), but we would prefer to have a replication-like scenario