Can't drag down audio onto timeline from source window

Am using Premiere Pro CS4.  If i have an audio only clip (WAV file), i double click and it loads up into the source window.  i set my In and Out points as per normal, and then try and drag it down onto a normal audio track below .. doesn't work! the mouse/cursor continues to stay in 'scrub' mode on the audio source monitor, and this did not happen before!
Doing it with video clip (with audio) works fine, and i CAN also use the 'Drag Audio Only' icon that is there... but why has this changed? i'm used to dragging down audio (as I can with audio+video), and yet it's just stopped working.
This must be an option or button i've hit somewhere, and is not do to with mono/stero tracks or different sample rates. It's the functionality of the program that has changed, and i can't work out why and it's driving me mad!!
thanks in advance,
Geoff.

In CS4, to drag down the audio you don't click in the middle of the window like you do with video files, you click on the green bar directly below the waveform (or as you noticed, on the speaker icon.)

Similar Messages

  • Can't drag down a cell containing formula

    I've created a simple balance sheet (incoming outgoing) as I've done many times before.
    I can't drag down a cell containing the formula which creates the total balance, which I normally do by clicking on the cell, hovering over the bottom right hand corner until the + appears and then drag that down to cells below, which usually continues the formula.
    Here's the thing - I used to be able to do this in this document and I still can in another group of cells within the same document. It appears that this cell has become locked.
    I've tried deleting the entire column and starting from the top, but again, it won't drag down.
    Any ideas?
    Thanks in anticipation.
    Phil

    Hello
    Having the sheet in front of me gives the soluce.
    You merged cells from column F and cells from column G.
    When this is done we can't use the fill down feature.
    Use Split into Columns to separate cells F from cells G and you will get the original behaviour
    Yvan KOENIG (from FRANCE vendredi 18 avril 2008 16:47:49)

  • I have about 800 more songs on my nano than itunes, due to a crash. How can I get the songs onto itunes from the ipod, or at least get the new music ive gotten since the crash onto my ipod without deleting all the other songs when it syncs?

    i have about 800 more songs on my nano than itunes, due to a crash. How can I get the songs onto itunes from the ipod, or at least get the new music ive gotten since the crash onto my ipod without deleting all the other songs when it syncs?

    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to put everything back.
    If you have failed to bakup, then you can transfer itunes purchases from an ipod: File>Transfer Purchases

  • After restoring my new iPhone5 I can't install my apps onto it from iTunes.

    After restoring my new iPhone5 I can't install my apps onto it from iTunes.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    Also, for not enough space, remove from your iTunes library media that is on the iPod that yo do not need so it can't be restored to the iPod

  • HT1665 why can't i down load my music from my laptop to my iphone.It is on my ipad.It does not sync.

    why can't I down load my tunes from my laptop. The downloaded from my laptop to my ipad but will not syc to my iphone 4.

    Tell us what you're doing when you connect your iPhone to your computer and open iTunes (BTW, this is the iPad forum, not iPhone forum).

  • My Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

    my Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

    You want system, data, backup etc. Make good use of the four internal drive bays.
    You will have to use Disk Utility to ERASE or click on drive and use PARTITION to make it Mac writeable.

  • HT1998 Why can't I uninstall AirPort 4.2 from my Windows 7 PC..  I downloading and reinstalling the 4.2 but during the installation process I get an error.  It reads...    "1608: Unable to Create InstallDriver instance Return Code -2147024894

    Why can't I uninstall AirPort 4.2 from my Windows 7 PC..  I tried downloading and reinstalling the 4.2 but during the installation process I get an error.  It reads...    "1608: Unable to Create InstallDriver instance Return Code -2147024894

    You should not install it again..
    Boot the computer into safe mode and try the uninstall again.
    No luck you will have to manually uninstall which is a pain. Delete the files and open regedit and delete the registry entries.. better still use the system restore to go back to a previous system where you had no 4.2 installed..
    Or just ignore it and install the latest 5.6.1 and if it gives trouble well do a clean install of windows.

  • TS1363 I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed.  Any suggestions?

    I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed.  Any suggestions?

    everytime I try to open the store it endlessly says "accessing iTunes store" but it never opens.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Ok, this is weird...when I drag an audio language lesson from my library to a playlist, the lesson changes from

    ok, this is weird.....when I drag an audio lesson from my library, the lesson changes from #11 to #7.   I've re-downloaded the lesson from the original CD with no luck.   Does anyone know why this happening?   This is the only lesson where this is happening.

    Thank you so very much!!!!  I know I will get this but hey, I am 70 years old - I sure hope I get it soon   Make sure "skimming is switched on" was wonderful.  Why doesn't Lynda even mention this?  UGH!
    In terms of dragging the clip; I am taking it from upper left hand corner of the screen which I believe is called the Event library and taking it down to the middle of the screen.  But in the middle of the screen is the daggone audio wave file and all I am doing is putting that clip on top of the audio wave file and when I play, I get both audios! 
    I remember working in iMovie 09 and iMovie 06 you would drag your clips down into the time line and do your editing there.  That doesn't seem to be working here.  I appreciate your help more than I can say.  I've got to get a DVD out ASAP and it has to be done in FCP X 

  • Can't drag, drop, or move icons from dock

    The issue exactly is that I can no longer move icons to the dock, remove them from the dock, reorder them, or delete them. The context menu still works fine, I just can't drag and drop. Furthermore, if I attempt to drag and drop from a stack, it reads the action as if I am trying to open the file.
    I'm running Yosemite 10.10.1
    Things I've tried so far:
    Repair disk permissions
    Repair ACL permissions
    Rebuild directories
    Relaunch dock
    Reset dock to defaults
    Rebooting/logging out (both fix the problem temporarily, however it returns within an hour of regular use)
    Trying to hunt down any extensions that might be causing issues...can't find anything (problem persists in guest account as well)
    Rebuild and repair kexts
    Cleaned out all caches
    Reinstalled OS X
    Wiped disk and performed clean install.
    I don't have anything installed that does any low level modifications (no third party antivirus or tweaking/tune up tools). For the life of me I can't figure this one out and it's really getting annoying to not be able to use my dock.

    Applications/Utilities/Terminal enter the command
    killall Dock
    Log out/in test. If it works okay, delete the .db from the desktop.
    If the Dock is the same, return the .db to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Learned from leonie.

  • Dragging single clip onto timeline crashes FCP

    Hi
    I am resizing clips but when I drag the clip onto the timeline, FCP shuts down.
    This happens repeatedly both on Studio 1 and Studio 2
    Please help.
    Thanks

    Thanks guys
    No my media is good and not a problem of where they are stored.
    I have gotten around this by dragging the clip into the source screen and then dragging it into the sequence monitor. It's more time consuming but much less frustrating than having FCP crash all the time.
    Many thanks

  • I can not drag java class onto uml class diagram - why??

    Hi
    1. I created a new java web project
    2. I created a new uml project.
    3. I created new classes in the java web project.
    4. I created a new "class diagram" in the uml project.
    PROBLEM:
    1. When I drag one of the classes onto the class diagram screen, nothing happens. That is, when I perform the "drop"...nothing happens.
    (NOTE: when I drag a "package" to the class diagram, a box representing the java package appears... I just cant get this to work for a class(s) )
    QUESTION:
    Should I be able to drag a class (or classes) from my web project src folder onto the UML project's class diagram and have UML representations of the classes appear?

    Hi Shay
    Unfortunately, I cannot view the suggested youtube stuff at work. (I'll try to view it when I get home)
    But, in the meantime, I did kind of get things working...
    After creating the java project and uml project (and initial class diagram), I had to
    1. drag the java packages (containing the classes I wanted diagrammed) onto the root node of the UML project (i.e., located on the left side "navigation" bar). Afterward, the package appeared under the UML project....Then,
    2. One by one I had to drag the individual java classes from the java project onto the root node of the UML project (i.e,. the classes then appeared under their respective packages under the UML project) . Then,
    3. Then, finally, I could drag the java classes (listed under their respective packages under the UML project) onto the class diagram panel, where the rendered properly.
    I dont know if this is supposed to be the way to "reverse engineer" java classes to be part of a UML class diagram... But, it was the only way I found that worked... thus far, anyway.
    Thanks again for reading my post and answering so promptly.... That was much appreciated!
    s

  • I can't drag and drop my songs from mp3 rocket to my iphone?

    i have my mp3 rocket account linked to my itunes account and some songs get put onto my phone, but some dont. i can't drag and drop and if i try to rename it with correct characters, nothing happens. the mp3 rocket folder is in music under shared libraries and they look like albums with a musical note in the middle. i tried unchecking and checking them again but nothing happens. i've restarted my computer. and i added those songs to "what's new" but i still cant add them to my phone...
    can someone please help?? thank you

    Select the first column before the track title.

  • Can no longer pull clip into timeline from Viewer??

    I no longer have the ability to drag a clip, or sub clip if I've chosen in and out points, into the timeline from the Viewer.
    When I attempt to do this the clip moves as if I'm repositioning the clip within the Viewer window, but does not move to the timeline.....thoughts??
    Thnx,
    Bh

    Either the video track that you are trying to edit on is locked (dark grey diagonal lines thru the track)
    or the source and destination patch buttons are disconnected.
    The Illustration below shows the v1 source correctly connected to the V1 destination:

  • How can I automatically change my edited timeline from 24fps into 25fps?

    Hello everyone,
    I have a timeline in 24fps with 24fps footage. I have to convert it (the timeline and the footage) into 25fps, so I can put a 25fps Timecode in it (it was a 24fps 16mm film material and it has to be rescan in 25fps...). Is there a way to do that? I mean beside of reedit everything in a 25fps timeline. The footage was quicktime prores 4444, I made merged clips of it and edited it then, so I have only merged clips on the timeline.
    I would be very thankful for any suggestions!

    Hi Richard, unfortunately I need to burn in Timecode from the source clips, so this won`t help me:/ but thanks for your answer! I think the only possibility for me is to create a new timeline in 25fps, modify the source footage from 24 into 25fps and reedit it. Is there any way to use command match frame (and reversed match frame) from merged clips in a timeline to source material from which I created the merged clips? so the source footage and not the used merged clip will be loaded into the source monitor? it would make a reedit much much faster...

Maybe you are looking for