Can't drag keywords to top level in the keyword HUD

After having imported my iPhoto library into Aperture 3, I found the keyword HUD cluttered with all of my 300+ keywords, many of which were duplicated. No idea why that is, but anyway. Some of them now live on top level, some on second floor under the main keyword "iPhoto", some of them are duplicates, some are not. That's the situation.
So I want to (a) drag some of them to first level, (b) build my own hierarchy, and (c) consolidate those duplicates that are alloted on separate levels. Now I find myself in trouble. Technically, I can drag any second level keyword from one to another first level keyword, but then they remain always on second floor. I find no way to move it to *first level* in the HUD.
I know that this can be done when the keyword HUD is almost empty. In that case, I drag it to the bottom of the list, see a white border pop up around the HUD, and let go. Simple. But not when the HUDs filled up to the brim?
Am I missing something?

OK ... but you're gonna groan. This is, btw, a long-standing bug (but still an excellent question).
Use the search field to search for the keyword you want to move.
Take advantage of the now empty space in the Keyword HUD to move the keyword.
Clear the search field.
Note that if you set up a well-organized hierarchical keyword list (which seems to be your goal), you can use the other work-around, which is to collapse all levels of the outline.
You might find these remarks on merging duplicates helpful:
http://discussions.apple.com/thread.jspa?messageID=12399717&#12399717
Message was edited by: Kirby Krieger to correct typos -- sorry, seems the coffee hasn't reached the fingertips.

Similar Messages

How can I programically make a top level VI panel invisible?

How can I programically make a top level VI panel invisible?

You can use VI Server's 'Close FP' method to close the front-panel. You will need a reference to that VI to invoke the method. One easy way is to launch the VI with the VI Server and hold on to its reference.
See the attached diagram -- the top-level.vi is launched and run, we wait for 5 seconds, and then close its front-panel.
Hope this gives you some ideas.
Khalid
Attachments:
close_fp.png ‏38 KB

Portal Invalid at the top level of the document. Error processing resource...

We installed WebLogic Portal. We were able to bring up the webpage while we were configured on port 80. As soon as we wired the portal for port 443, it would not display page. Error: Invalid at the top level of the document. Error processing resource...
We are on a VM with Redhat Linux 5. Oracle Weblogic portal 10.3.5
Has anyone had this issue in the past and was able to resolve it?

Did you upgrade your Portal to 10.1.4? Are you using the Web Cache port # or the HTTP Server port #? You can get this error message if you use the HTTP Server port # on Portal 10.1.4.

Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document.Line.

Using Installation wizard to deploy SSIS packages from DEV server to QA server package store cause this error;
Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document. Line 773, Column 93". This happens when loading a package and the file cannot be opened or loaded correctly into XML document. This can be the
result of either providing an incorrect file name to the LoadPackage method or the XML file specified having an incorrect format. Please who have the idea of how this issue can be resolved?BI Developer

Hi ,
for this Error one and only one solution
go to view Code, line number and Column number shown in error message,
and Remove code from there till last and save it, it happens when we are moving Package from one server to another server. and VS adds some lines of code at the bottom of package
something like this
andles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0">
<control>
<ddsxmlobjectstreaminitwrapper binary="00080000921400008c040000" />
</control>
<layoutobject>
<ddsxmlobj>
<property name="LogicalObject" value="{BBFB0E
Remove this code and save package it will work.
hope this will help to Developers who are searching for same ......... :)

XSQL file "Invalid at the top level of the document"

I am trying to insert HTML form parameters into database using <xsql:insert-request>. It worked fine except that it displays <xsql-status action="xsql:insert-request" rows="1"/> after it inserts the data into the database. I am trying to follow the insertnewsform example in Steve's book "building oracle xml applications" to return user a thank-you note. Here is my problem:
I have four files:
faqform.html (html form, action=faqfeed.xsql)
faqfeed.xsql
request-to-faq.xsl (used as transform for faqfeed.xsql)
thankyou.xsl (used for returning user a thank-you)
When I submit the html form, I get an error saying:
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Line 1, Position 43
<?xml version = '1.0' encoding = 'UTF-8'?>"
I didn't put "encoding..." in any of my xsql files, not sure where that came from. When I used faqfeed.xsql?xml-stylesheet=none in the url and it showed up as a well-formed xml file with all the info I need. Here is my faqfeed.xsql and thankyou.xsl
********* faqfeed.xsql ***********
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="thankyou.xsl"?>
<page connection="template" xmlns:xsql="urn:oracle-xsql">
<xsql:insert-request table="faq" transform="request-to-faq.xsl"/>
<xsql:query tag-case="lower" max-rows="5" rowset-element="" row-element="faq">
select * from faq
</xsql:query>
</page>
********* thankyou.xsl **********
<html xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xsl:version="1.0">
<head><title>Thank you!</title></head>
<body>
<h3>Thank you for your faq!</h3>
Your faq has been successfully inserted to the database!
<table>
<xsl:for-each select="page/faq">
<tr>
<td><xsl:value-of select="question"/></td>
<td><xsl:value-of select="answer"/></td>
</tr>
</xsl:for-each>
</table>
</body>
</html>
Anything I am missing here that caused that error? Any hints would be greatly appreciated!
Wenqi
null

Do the XSQL Demos work correctly on your system?
The error you're getting seems like maybe the *.xsql extension is not mapped properly to the oracle.xml.xsql.XSQLServlet class in your servlet engine.

Invalid at the top level of the document in XML file

Hi,
I am sending an XML file (Which is generated by SAP) through mail to the receiver. When the receiver opens the file he is getting the below error. Kindly help me to rectify this error.
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/Documents and Settings/bnkrishnan/Desktop/X...
Regards,
Navaneeth...

Hi guys,
Could any one help me in this?
Regards,
Navaneeth

HT202297 I can't drag my ical events over to the reminders list.

I can't drag my ical events over to the reminders list (that's not there anymore) like I used to be able to do. Why?

What version of iphoto? If it's iPhoto 11:
Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Does it?
Iphoto 09 or earlier
Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). A Finder Window +should+ open with the file selected. Does it?
Regards
TD

In List View, how can I move an item from within a subfolder up to the top level of the window's parent folder?

Up 'til now, from System 7.1 to Tiger—I skipped Leopard—you simply dragged the item onto the folder window's titlebar (since that folder's icon was, naturally, not in its own window) and BINGO! there it was, at the top level. Nothing I can think to do in Snow Leopard seems to work.

Thanks. Most definitely does, although when experimenting I found the left window edge was closer, and 'scrubbing' the item just out of the window and back in seemed to fit the underlying file and folder metaphor better to my mind than just dropping it any old where in the window.
And 'any old where', at any old speed doesn't always bring up the oh-so-subtle blue border that says, "I get it, you wanna add something to this window, hit me." That's The Clue. There seems to be an invisible line you hafta cross, and some kind of deliberate pace you hafta hit. Too fast and SL doesn't seem to always take it seriously. But that left edge scrub can be quite fast.
Sorry about the over hasty denial, I was checking my facts and editting to say you were right when the board was shut for some sort of maintenance, and my bad became permanent. Please forgive.

How can I find out what top level VI TestStand cannot find a sub-VI for?

I am trying diligently to build a TestStand deployment and keep getting errors. TestStand is telling me that an error has occurred because it cannot find a sub-VI in a certain path. The problem is it does not tell me what VI it cannot find a sub-VI for. It just gives me the path that it is trying to find the sub-VI in. Is there any way I can tell what top level VI in a sequence TestStand is trying to find the sub-VI for? Thanks in advance for any help.

Josh - I did not have any disbale diagram structures in the sub-VIs that were giving me trouble. Nor did I have any read only VIs. I mass compiled my entrire directory structure...twice. I had no choice but to go through every single sequence and open every VI. Once opened there were three that did not have the correct directory for a sub-VI and need saved. There were no errors due to a Labview mismatch. For some reason these three VIs did not save the sub-VIs new directory therefore causing trouble during my TestStand deployment build process. The thing I find odd about this is there are hundreds of other VIs that use these same sub-VIs in the same new directory that mass compiled fine. I am continuing my TestStand deployment build process and I will see how it goes from here. I definitely got further, after finding these three errros, than I have before. Thanks for the help.

Did 10.6.5 alter the permissions of the top level of the startup volume?

Since applying the 10.6.5 update it seems that non-admin users have read/write access to the top level directory of the startup volume. That means that non-admin users can create items there.
I am wondeing if this is a normal change for 10.6.5 or if something is weird with my system.
We updated from 10.6.4 via Software Update. This machine has only ever had Snow Leopard installed on it.
(Note that top level sub-folders such as Library and System do not appear to be affected by this)

Are you referring to the ownership and privileges for the drive? If so then if they aren't set at the default it's because of something a user has done because the installer makes no such changes. You can return them to the default as follows;
1. Select the drive and Press COMMAND-I to open the Get Info window.
2. In the Ownership and Sharing section at the bottom is a checkbox labeled, "Ignore permissions on this volume." If the box is checked then click on the lock icon and authenticate. Uncheck the box.
3. Open the Terminal application in the Utilities folder and enter the following command then press RETURN:
sudo chown root:admin "/Volumes/Macintosh HD"
You will be asked to enter your admin password which will not be echoed.
If you now click onto the still open Get Info window you should now see the proper info:
Owner=system with r/w privileges
Group=admin with r/w privileges
Everyone is read-only
Click on the lock icon to prevent any changes. Close the window then quit the Terminal.

Seagate 500Gb FreeAgent GoFlex HD -Can't drag folders from Mac on to the HD.

I purchased a Seagate 500Gb FreeAgent GoFlex HD. I will be copying files/folders on to a PC and a Mac. I have a MacBook Pro and I'm not able to drag files/folders to the Seagate hard drive from my Mac. When I drag them to the HD, I get the circle w/ the line across. I did the Mac install and chose the option for PC & Mac. Any ideas why my files/folders won't copy onto the Seagate hard drive??

Someone? Please?? Is it possible that I am the only one who noticed this!?!?

How can i set the item properties at top level

Dear all
i want to set the responsiblityname and operating unit name at the top of the page
is there any specific regions are there to set at the top level of the page(Image region)
Regards
Sreekanth

FND Framework Compataibiity Mode is a Profile Option you can set the value as 11.5.10.
And instead of creating product branding progrmatically create product branding and incontextbranding at design time.
Also, for both of these items we have View Object and View Instance properties...
For this you take two transient attributes in VO and then as you have grabbed the responsibility name and operating unit...
then you can set these values on these Transient attributes and then they will be visible on Top region of page.
Associate these transient Attributes on product branding and incontextbranding items.
Thanks,
Gaurav

Parent-Child hierarchy without facts in top-level

Hello folks,
I've got a fact table which looks like:
fact_id | costs | some_id
1 | 5 | 1
2 | 10 | 1
and a hierarchy which looks like:
id | super_id | some_id
1 | null | null
2 | 1 | 1
3 | 1 | 1
In the business logic layer I defined two keys for the dimension talbe (id and some_id) and built the hierarchy on the first (id).
Also I defined a foreign key from the fact table to the dimension on the second.
As you see no facts are assigned to the first entry (= top-level) in the hierarchy (id = 1).
However the children of 1 have got facts.
What I want is to show the costs for the children (which is the sum of 5 and 10) and the total sum for the parent (30).
However when I drag the hierarchy and the costs into an analysis I get no results available, as there are no facts for the top-level.
How can I fix this?
Regards,
Matthias

Hi Dhar,
thanks for your reply!
What you write coincides with what I thought would happen (but didn't).
Hence there must be some error in my rpd file.
I created my hierarchy right-clicking on the dimension table and only setting the mandatory settings (that is the definition of parent/menber keys and the setup for the hierarchy table).
I didn't touch what admin-tool created inside the hierarchy, which is: a "total" level, where "grand total level" is checked, and a "detail" level, where "Supports rollup to higher level of aggregation" is checked.
What other settings in the admin-tool will I have to touch to step forward?
@anton: I'm using OBIEE 11.1.1.5.0
Regads,
Matthias

Cannot Create Folder at Top Level of Documents Library

Operating System: Windows 7 Enterprise, 32-Bit
Environment: Windows 2003 domain
Security: Local Machine admin, and domain admin
Documents Library is redirected via Group Policy to
\\servername\home\username
Navigating to Libraries\Documents, there is no "New Folder" button available at that top level of the library. When using File menu => New => Folder, I get "Unable to create the folder 'New Folder' File system error (512)."
Looked that one up using Google, er, I mean Bing, and found articles about it being an old DOS\Win95 issue with the 512 max limit on the root drive. Am familiar with that problem, and this ain't it. Less than 30 folders at the root level, and none more
than 20 characters long.
From inside an Application, if I try to save to my Library\Documents folder, I cannot save a file to the root level. I get "To save here, you must first include a folder in the Library."
At this point where I am looking to save a file, I also cannot type a folder name for navigation, as I am used to doing with previous OS's. So in my address area, I have Libraries\Documents, then I have a subfolder called "important." If I type
the word "Important," expect the system fo navigate down into that folder. Instead I get "To save here, you must first include a folder in the Library." If I type "Important\" I still get the same error.
Navigating to \\servername\home\username, I am able to create a New Folder at the top level from a Windows Explorer window, or from inside an application such as Word.
Mapping a drive letter to \\servername\home\username also will allow me to create a New Folder at the top level, from a Windows Explorer Window, or from inside an application.
From a command prompt, I am able to get to the drive letter and create a new folder.
With the drive letter mapped, going back to Libraries\Documents, I am still unable to create a new folder that way.
I read these two threads, both of which sort of die off with no real answers. So I've started my own.
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/4ea2f28f-8487-40cf-abb0-745916e72b7a
http://social.technet.microsoft.com/Forums/en/w7itprosecurity/thread/ae2505ce-8a6b-493b-9473-a0dca215fd34
Any Help?

Hi,
Regarding your problem, it seems that the user didn’t have appropriate permissions to create folders. To get it work, NTFS and Share permissions must be configured
appropriately.
Here are the Share and NTFS Permissions needed on the File Server Shares and the steps to do so:
NOTE: The $ symbol should be used to hide the existence of the share.
User Home Share Configuration:
Here are the Share and NTFS Permissions needed for Home Directories:
a. The Share permissions (Sharing Tab): Share Named: <HOME>$
Administrators: Full Control
System: Full Control
Authenticated Users: Full Control
b. NTFS Folder Permissions (Security Tab): Turn off inheritance on the Folder named <HOME>, and copy the permissions. (Uncheck "Allow inheritable permissions
to
propagate to this object")
Administrators: Full Control
System: Full Control
Creator Owner: Full Control
Authenticated Users: Read & Execute, List Folder Contents, Read
c. On the NTFS Folder Permissions Click the Advanced Button. Then highlight Authenticated Users, Select View/Edit
d. On the Permissions Entry for <HOME>, "the Apply onto" change to: "This folder
only"
e. Click OK
f. Click OK again.
More reference, please read the following document:
Windows Server 2008 Share/NTFS permissions on home
directories/folders
Redirect the Documents folder to a network share
Please note: we provide the third party link for technical use
only. There may be some changes without notice, Microsoft doesn’t guarantee any accuracy on contacting information.
BTW, as this issue is relevant to Windows Server 2003, please post in
Windows Server forums for solution as well.
Hope it helps.
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Top level navigation to be re organized to come in one page

Dear SDN,
I have one requirement. I want to change the Portal Theme in such a way that Top level navigation to be re organized to come in one page istead of scrolling left or right. Suppose the user having more than 20 roles then he shouldnt be scrolling more times to left or right for the roles, thats why we want that in one page.
Can anybody please help me to solve this. Is there any way where we can set all roles visible in one page??
Thanks & Regards,
Nikesh Shah.

Nukesh
I have given you the link above.
You should read it
There is a step wise procedure for how can you set Navigation Level to 0.
I. Configure Top-Level Navigation
       1.      In the Portal Catalog choose Portal Users-> Standard Portal Users. This folder contains the Default Framework Page.
       2.      Right-click Default Framework Page and choose Open ->Object.
       3.      From the Page Content List, select the Top-Level Navigation iView and click Properties.
       4.      In the Navigation property category, scroll to the Number of Display Levels property and enter the value 0, 1, or 2, depending on how many navigation levels, if any, you want for top-level navigation.
Choosing 0 removes top-level navigation and displays your navigation structure in the Detailed Navigation iView.
       5.      Click Save.
II. Configure Detailed Navigation
       1.      From the Page Content List of the Default Framework Page, select Desktop Innerpage and click Open.
       2.      From the Page Content List of the Desktop Innerpage select the Detailed Navigation iView and click Properties.
       3.      In the Navigation property category, scroll to the Start at Level property and assign a value that is one higherthan the value of the Number of Display Levels property in procedure l. Configure Top-Level Navigation. For example, if top-level navigation is configured for one level, the detailed navigation begins on the second level, that is with the value 2.
Detailed navigation is not automatically synchronized with top-level navigation; the values that you enter for top-level and detailed navigation must agree. For example, if you enter the value 1 for top-level navigation, while detailed navigation still has the value 3, one level is left out, creating a gap.
       4.      Click Save.
III. Configure the Content Area
       1.      From the Page Content List of the Desktop Innerpage, select the Content Area iView and click Properties.
       2.      In the Navigation property category, scroll to the Number of Display Levels in TLN property and enter the same value as that of the Number of Display Levels property in procedure I. Configure Top-Level Navigation.
       3.      Click Save.
Thanks...
Edited by: Chetna Verma on Aug 21, 2008 7:19 AM

Can't drag keywords to top level in the keyword HUD

Similar Messages

Maybe you are looking for