Can't e-mail photos using iPhoto.  I get an error message saying...

I already receive mail via the iMail client for my iCloud (@me.com) account.  When I tried to set up an e-mail account withing iPhoto, it prompted me for that same information.  I used my @me.com e-mail address and password correctly (I think), but then it says, "the server didn't recognize the username/password."  HELP!! 

This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope)

Similar Messages

  • TS3276 Can't open web addresses from an email-get an ERROR message saying-no application could be found

    Can't open web addresses from an email-get an ERROR message saying-no application could be found

    Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

  • I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!

    I have upgraded to Yosemite and also updated the iPhoto application to version 9.6. I am no longer able to send a photo from iPhoto via email. I get an error message saying the server is not responding. But, when using the same server in Mail, I can attach the photo and send it. My wife is using the older version of iPhoto and it works fine.
    I have checked the settings for the outgoing server, etc. and the Mail settings match those in iPhoto.
    Could this be due to either the Yosemite upgrade or the iPhoto upgrade?

    This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
    I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
    https://appleid.apple.com
    Click "Manage Your Apple ID"
    Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
    Click Password and Security in the left column
    Click Generate an app-specific password
    Enter iPhoto as the name of the app
    Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
    And...voila' (I hope)

  • I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error  message saying "The file is an unrecognized format."  But if I

    I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting.  When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format."  But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine.  Why won't iPhoto accept jpegs scanned at the highest quality setting?  Wondering?

    What scanner format settings dis you use?  Are these color photos? If they are B/W did you scan as grayscale images?  That could be the problem.  
    Are you able to open them with Preview?  If so do a Save As, select full quality and save as a jpeg with a new file name.  See if that file will import and work as intended. 
    OT

  • How can I update my itunes when I keep getting an error message saying the network path is not available

    I am trying to update my itunes  to 11.0.1, I can download it but when I install I keep getting an error message that states:    the feature you are trying to use is on a network resource that is unavailable. Click ok to try again or enter an altenate path to a folder containing the installation packagr itunes64.msi* in the box below.  use source: C:\Users\owner\AppData\Local\Apple\Apple Software Update\    
    Nothing helps? what do I need to do?

    The servers are getting slammed by millions of people wanting to upgrade..   just give it some time, and soon enough you'll have your upgrade.

  • When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

    I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
    AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

    I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

    To diagnose problems with Thunderbird, try the following:
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto.  You have made changes to your photo library using a newer version of iphoto.  Please quit and use the latest version of iphoto.

    Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto.  You have made changes to your photo library using a newer version of iphoto.  Please quit and use the latest version of iphoto."  I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to. 

    If you don't have a backup you can resort to give this a try:
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

    When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • When I open iphoto I get an error message that says Your photo library is either in use by another application or has become unreadable,

    when I open iphoto I get an error message that says Your photo library is either in use by another application or has become unreadable, I have tried restarting computer and opening iphoto whilst holding down option and command key, but then I get the following message-Your photo library is damaged or unreadable and cannot be opened. Please restore from a backup.  Please can anyone help?

    Make a back up now. If you have any vaule in Your photos always have a back up.
    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
    In Library Manager the Rebuild command is under the File menu. There's also an excellent Help available.
    Regards
    TD

  • When importing photos into iPhoto I get an error Unreadable Files:

    When importing photos into iPhoto I get an error Unreadable Files: The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
    I can open the JPG in question with PREVIEW, photoshop etc.. actually if I try to import a photo that I had originally imported it also fails..
    Please help... Thank you..

    I too had this error message (and to be honest, it was becoming a bit of a pain). I resolved it in a slightly different way to Terence.
    I had 10 photos that were allegedly unreadable; however, as Terence rightly says, they are duplicates. When I opened iPhoto I mad a note of each of the files concerned and did a Spotlight search throughout my hard drive.
    For each photo, there were four or five duplicates. I deleted all but one of each of the photos and then reopened iPhoto. No more error message.
    The original problem stemmed from importing my files directly from an external device I was using with a previous computer [that was running XP].
    Anyway, hope this helps.
    Andy

  • When I try to open iPhoto, I get an error message that says it can't open the application because it may be damaged or incomplete.

    When I try to open iPhoto, I get an error message that says it can't open the application because it may be damaged or incomplete.

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    Happy New Year

  • I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

    I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

    This article has a link for more information on finding your profile directory: [[Fix the "Could not initialize the application's security component" error message]]. On Windows 7, you can try this (either in a Windows Explorer window address bar or from the start menu search box):
    %APPDATA%\Mozilla\Firefox\Profiles
    You may see one folder in there and that's the one you want. If you see more than one, look for the one with the most recently modified files.

  • When using Migration Assistant to transfer files from my pc, I get an error message saying that an attempt was made to access a socket in a way forbidden by its access permissions.  How can I fix this?

    When using Migration Assistant to transfer files from my pc, I get an error message saying that an attempt was made to access a socket in a way forbidden by its access permissions.  How can I fix this?

    You followed:
    http://www.apple.com/support/switch101/

  • I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    Please see the subject line thanks
    I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    If you were told they would refund the price for the iCloud storage - Contact AppleCare and ask to speak with a senior advisor.  Have the case number for the promised refund available.
    If you are trying to update your device, but you don't have sufficient space to download and install the update, you need to delete content from your device.  Buying storage in iCloud does not add space to the device which is what you need.
    You can always update using a computer with iTunes installed - this method is faster, and will allow you to make a backup on the local computer (Local backups restore faster than iCloud backups).
    HTH

Maybe you are looking for