Can't edit 360VR Pano in QT Pro 7.0.4 Windows XP

I can not edit my QT 360VR Panoramas in QT 7.0.4 Pro using Windows XP, However I can edit the Pano's on my Mac G4 using QT Pro 7.0.4 I know I'm doing this right because it works on the Mac but QT 7.0.4 is for sure non compatible with XP. After reading over 60 pages of post complaining of non compadibility issues with Windows XP and QT Pro 7.0.4 it is clear the QT techs need to patch things up on a future upgrade.
Here is what I'm trying to do...I open my QT autorotate5secs.mov sprite track widget, go to "edit" then "Select all" then "copy" I then open my QT 360VR Panorama go to "Windows" select "show movie properties" select "presentation" change "QTVR movie controller" to "movie controller" go to "edit" select "add to selection and scale" and nothing happens what should happen is the "sprite" should paste at the top of the other tracks! I also know if the "sprite" were to paste I would then change the "movie controller" back to "QTVR Movie controller" and "save as" a new QT named movie file of my choosing.
Now thease same steps work fine "sucessfully" on my Mac G4, but not on Windows XP. So...QT techs PLEASE write a PATCH!
If there are others with the same problem I would like to hear and if someone has a cure I would really like to hear from you, Thanks B
toshiba Windows XP

Similar Messages

Can I edit the system file Manifest.XML in Word for Windows? (there's a reason for doing this)

I renamed a file directory containing several PDFs. Consequently, Adobe Digital Editions says these files are missing when I try to open them and look at notes I made. There seems to be an obvious solution, but I'm unfamiliar with XML and don't want to screw things up. The file locations and a lot of other information for Digital Editions is in an XML file called Manifest. If I can edit the XML file to show the correct directory, I expect I'd be able to see these files and recover my notes. I'm unsure what Word for Windows may do (e.g., add or delete characters) when I edit and save the new Manifest. That might corrupt the Manifest and be extremely counterproductive.
Is editing the file locations in Word for Windows safe, so long as Digital Editions isn't open when I do my editing?

I can confirm that Notepad++ can happily edit manifest.xml files, but as Jim_Lester says, make a backup (especially if you are not used to XML).
You may well find that if you Open the .epub files from their new location explicitly from ADE (ctrl-O) that you will both be able to read documents and see the notes.
I can't vouch for that; but if it works I'd recommend it over editing the manifest file.

Can't edit text in Acrobat X Pro

I can't seem to edit text properly in a recently created PDF document, using Acrobat X Pro. I went to the help file, and followed the instructions, but it isn't working right. All I need to do is replace the numeral "8" with a "7" in a paragraph. When I finally get to the point to edit the text, I can delete the "8" but when I type "7', it creates a large space instead.
The instructions said that maybe I have to do something regarding the adobe font, so I did that, was able to finally enter a "7" but it messed up the formatting of the paragraph. Surely it can't be this hard to revise one character?

Steve,
There are definitely folks out there that have had the same problem in Lion. Just to cover the obvious basics however ... Select the clip with the text in it (we are talking about Titles, right?). Then position your timeline vertical playback marker somewhere in that clip. Go up to the preview window and make sure the little rectangle icon in the lower left corner is Blue (enabled) ... a little horizontal line will appear near the center of the text area with a little circle on the end. Then go to a word in your text and double click it. Does it select the word? Making sure again that the text clip is actually selected on the timeline, if it does not select the text then I probably cannot help you. There are other discussions on this topic, but I really do not know for sure if there are resolutions. FYI, I use FCP X with Lion and 16GB on a 2011 21" iMac and use text titles about 20 times a week and do not have a problem at all. Still I know the problems others are seeing are real. Best wishes,
stephen

Can I edit HD on Mac Book Pro with FCP X without CRASHING often?

Model Name:                   MacBook Pro
Model Identifier:              MacBookPro8,3
Processor Name:               Intel Core i7
Processor Speed:                 2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:                           8 MB
Memory:                              8 GB
I keep having crash issues, FCP X on my 17inch Macbookpro is crashing on simple task like playing back a short video clip in HD from an iPhone.
and the People at the store were not able to tell me why.
Not sure if this is possibe,
Can I use RAID external drives to take off the pressure of editing on my macbook?

You can back up your MacBook Pro with Retina display while it's in sleep mode (not turned off) if you have turned on Power Nap.
Also, you can back up all the Macs you want to one Time Capsule, always that you have enough storage on it. Also, you can back up the rest of your Macs in sleep mode if they are compatible with Power Nap. See > http://support.apple.com/kb/ht5394

Can't edit text in final cut pro x

Hi
Have been reading through the posts, but I am still unable to highlight the text to edit, can any one help?
Steve

Steve,
There are definitely folks out there that have had the same problem in Lion. Just to cover the obvious basics however ... Select the clip with the text in it (we are talking about Titles, right?). Then position your timeline vertical playback marker somewhere in that clip. Go up to the preview window and make sure the little rectangle icon in the lower left corner is Blue (enabled) ... a little horizontal line will appear near the center of the text area with a little circle on the end. Then go to a word in your text and double click it. Does it select the word? Making sure again that the text clip is actually selected on the timeline, if it does not select the text then I probably cannot help you. There are other discussions on this topic, but I really do not know for sure if there are resolutions. FYI, I use FCP X with Lion and 16GB on a 2011 21" iMac and use text titles about 20 times a week and do not have a problem at all. Still I know the problems others are seeing are real. Best wishes,
stephen

Can't Edit SWF in CS5 Flash Pro

Forgive the noobness, but I'm trying to find out why I can't open a SWF file in CS5 Flash Pro.
When I attempt to open the file, it opens in a box as seen in this screeen cap.
I'm using Win 7 on my desktop.

You should always start your own posting rather than tagging onto someone else's... especially one that is already marked as answered. Postings with 0 reolies draw attention.
Your version of Flash is too old to be able to open the files from that tutorial. The tutorial is using either CS4 or CS5.

Can not edit file on network shared folder after upgrading to windows 7

Merry Christmas and happy new year,
Due to some configuration changes on a specific application, I have forced to upgrade OS of a few number of workstations from Windows XP to windows 7. After upgrading I am facing a strange problem on WIN7 workstations. These workstation are member of a Windows
2008 R2 Active Directory domain which also has a Windows 2003 advanced server additional domain controller. Also there are a number of shared folders on some member servers (all windows 2003) which are mapped as network drives at user logon. Before upgrading
mentioned workstations to WIN7, users was able to edit his/her files on all of mapped network drive according to his/her permissions without any problem on their WINXP workstations, But after installing windows 7 they begin facing problem on one of these mapped
network drives and the problem exactly is when they edit a file, in more specific word an excel file, and then try to save, the excel returns an error message of "document not saved" and exit the excel program. It becomes more strange when you learn
that the edited excel file is disappeared and replace with some "tmp" file. If user copy the excel file to his/her own desktop, edit it and then copy it back to its original place on mapped network drive, it will be replaced normally with its older
version. In other words if user wants to edit an excel file on that specific network drive, he/she must edits it somewhere else and then replace it on the network drive. If the same user uses a WINXP box, there will be no problem.
Can anybody help me to fix the issue?
TIA
Bijan

Thank you Karen,
The problem is fixed, but my case was none of what you suggested. In fact I have
another problem which I described in another question and it was of the root of this excel file issue. I describe what I have done to fix the latter problem hope to help fixing similar issues to mine.
Okay, as it is described in the
question, I was not able to open a shared folder with its UNC address while it could be mapped as a network drive without any problem. I examined what I was replied and some other ways, came to no result. I decided investigate a similar shared folder in
permissions to problematic one to see if the problem is repeated. So I created a folder and shared it with similar permissions and examined it. Surprisingly there was no problem. It was wise to remove sharing of the problematic folder and share it again to
see if the problem resist. But when I tried to remove sharing I received an error message saying that
the shared folder is related to a DFS root. When I took a look at the DFS roots of domain there was no sign of the problematic folder (that made me recall that I created a DFS root with problematic folder mistakenly and removed that DFS root).
After little searching, I found out that the problem could be caused by traces of the removed DFS root. Yep! I found the suspect! The registry key
HKLM\Software\Microsoft\DFS\Domain\problematic shared folder. I removed the key restarted DFS service and log off and on and Bingo!
This problem pops up a few more questions:
1) Why is not the registry key related to removed DFS root deleted from the registry of windows 2003 server?
2) Why was I able to browse this ex-DFS root shared folder without any problem in windows XP while it was problematic in windows 7?
3) As there is no special client service for DFS and user can access DFS root targets like other shared folders what is the deference between shared resource access mechanisms in windows XP and windows 7 that caused the problem?
Bests,
Bijan

Why Can't I run Acrobat 9.0 Pro in 64 bit Windows 7?

Earlier today I was limping along with 9.0 Pro in windows 7. Then it stopped working. Although the document would scan, there were no characters on the page when the scan was complete.

You need to update AA9. I am not sure which subversion was needed to work with x64 systems. Generally the initial releases have not worked with x64 systems. I think that AA9 will work with x64, but only after updating. The current version of AA9 is 9.5.2. Some have still reported problems with x64 systems after upgrading, but without the upgrade you can probably forget it.

Where can i get a driver to officejet pro 8500A plus for windows 8.1 ?

I tried to download the driver from the hp site but i didnwt found it.
i need the driver and the software manegment.

Hi, use the HP printer install wizard. (link)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Can u edit words and convert files with creative cloud?

is adobe cloud for pics only or can i edit files and convert

Acrobat XI pro present in CC helps you to these.
Convert PDF to Word doc, PDF to Word converter | Adobe Acrobat XI
Regards
Rajshree

I have AVI files that I need to be MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I have AVI files that I need to convert to MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....When I have the files open in QT Pro do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I strongly recommend you use compressor to do the conversion (if it will open the files - since quicktime will open them, it will more than likely do it.
Compressor allows you to customize presets and save them and apply them to multiple files. Although the interface may seem daunting, it's actually pretty simple.
Even if you can edit the avi in fcp, it's not a good idea. Liable to cause problems down the road.

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

Can I Scan to editable text on HP Officejet Pro 8620 using the Apple Printer Driver 3.0?

Can I Scan to editable text on HP Officejet Pro 8620 using the Apple Printer Driver 3.0?
I had a very difficult time getting my new HP Officejet Pro 8620 functioning as well as it does now. I just tried scanning something as editable text for the first time and it ended up being scanned as a pdf. At one point in my various tries there was a note on the printer screen that I did not have the HP OCR software installed.
This may be because the resolution to my installation problems with the HP Officejet Pro 8620 seems to have been reverting to operating with the HP-Apple Printer Drivers 3.0 package instead of the HP-Officejet-Pro-8620_v12.32.0.dmg installation package.
I do not, therefore, have the HP Scan application on my computer now which is where HP says its OCR software can be found.
So what I'm afraid of is that I'm now running well with the HP-Apple driver but if I do go back and install the HP Officejet Pro v12.32.0 driver software with the HP installer, in order to access the OCR softwware in HP Scan application, I'll mess up everything else.
Is there any chance that the HP-Apple Printer Drivers 3.0 package I have installed also includes OCR software? If so where can I find instructions for activating it and using it with the HP 8620's scanner?
Or can I only get OCR capability with the HP-Officejet-Pro-8620_v12.32.0.dmg package?
Any experience with this? Should I leave well enough alone? Or can I somehow install the HP-Officejet-Pro-8620_v12.32.0.dmg package without messing up my current functionality?
Thanks
Steve

The printer driver that is installed automatically from Apple doesn't scan. The scanner part can be accessed through Image Capture, but I don't think that does any OCR on the scan. You'd need a separate program. As you noted, many of the bundled software programs have OCR built-in (albeit limited). From my experience, that is only activated when you scan to "searchable" PDF or something similar. You would then have to extract the text from the PDF.
I don't have an HP printer/scanner, so take this all with a grain of salt.
If you can just install the Scanner utilities, that shouldn't affect the printer portion.
Your other option would be to purchase separate OCR software. Unless you need to scan lots of documents into text, you should further investigate installing the HP scan utilities.

Acrobat XI Pro - can't edit a form from another version of Acrobat?

I've got a form I'm trying to edit to see how something worked with a form field. However, I can open it just fine in XI Pro, but when I do a Forms/Edit I get the following popup message: "This form cannot be edited in Acrobat. Please use Adobe LiveCycle Designer to edit this form."
I can open it just FINE on my old machine that has Acrobat 8 Pro with LiveCycle with no problem.
So, how is it that I can open AND edit this document in 8 Pro and not XI Pro?? I've been tinkering with a couple of different forms in XI Pro, and I assumed that LiveCycle must have been subsumed into Acrobat XI Pro itself, but this mystery would seem to indicate otherwise!
Help? Answers? Thoughts? Cookie recipes?
Thanks!!

You will need to get LiveCycle Designer, which is now a separate product.
XFA forms created with LiveCycle Designer can be either static or dynamic. Static ones are very similar to forms created in Acrobat (AcroForms) in their behavior. Dynamic forms can have auto-expnding text fields, rows added to and removed from tables, entire sections generated and removed at run time, and a number of other dynamic behavior. So which you choose really depends on what your needs are. Many static XFA forms could be created as AcroForms with no loss in functionality. A big downside to XFA forms nowadays is the lack of PDF viewers for mobile devices that support them. AcroForms have always had more support in general.
JavaScript is used in both XFA and AcroForms, but each has it's own object models. XFA forms also support FormCalc, which isn't a full blown programming language like JavaScript, but it does have a number of useful features.The types of controls are pretty much the same, though an XFA forms support an image field and a good number of 1D barcode types with bar code fields.

Can I edit anything in a pdf using Acrobat XI Pro?

Can I edit anything in a pdf using Acrobat XI Pro?

And the degree of effective editing may be an issue. Editing is not a recommended task in Acrobat, but instead edit in the original doc and recreate the PDF.

Can't edit 360VR Pano in QT Pro 7.0.4 Windows XP

Similar Messages

Maybe you are looking for