Can't edit form after upgrade to Acrobat XI

I am using Adobe Acrobat XI through Adobe Creative Cloud and was going to edit a form that I had made and I get this message:
"This form cannot be edited in Acrobat. Please use Adobe LiveCycle Design to edit this form."
Does anyone have experience with this problem.
I just edited form in Acrobat about two weeks ago and then it was no problem.

Thanks George, this is a document that I made in 2012. I have figured out that I did password protect it and also did use an certificate. So I am going to look in my backups and find the original file before I locked it.
I was only saying that I had edited another form in the Acrobat XI, not this one.
Thank you for your answer.

Similar Messages

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?
The issue is they type but there is 2 second delay when it appears in the field.
Windows 7 64bit

I see, I misread your reference to Reader 11 to mean you were using Acrobat 11, but it looks like it worked out anyway.
The base-14 fonts are special in PDF because they are guaranteed to be available even if they are not embedded. If you select a non-base-14 font for use with a form field, the entire font usually gets embedded, since each glyph it contains has to be available for use with the field. This can take up a lot of space if you do this a lot, and the space isn't reduced if you change back to a base-14 font later because the internal reference to it is not removed. This is caused by the bug I mentioned.
In your case, however, the entire font doesn't get embedded because fonts like it (e.g., large asian fonts with a lot of glyphs, Arial Unicode) would take up too much space if fully embedded. If it did, a 100KB PDF could bloat to 20MB with that one change. Instead, users are expected to have such fonts installed on their system, which is why you were prompted to install the font pack. This despite the fact that the font was not actually used by anything in your document, it was simply the orphaned reference to it that triggered this. This should get fixed in Acrobat eventually so this type of thing doesn't happen again.

I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accounts

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

Can't launch color after upgrading to OS 10.5

I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?

Click here and follow the instructions.
(46092)

Can´t open LR after upgrade to 5.3 without entering a licens key

Can´t open LR after upgrade to 5.3 without entering a licens key

I have seen comments from someone who indicated that every time they started Lightroom they were prompted for the serial number, even though they had already entered it. Is this your situation? I can't remember what the solution is, but I have seen that problem mentioned in the past.

Can't open Pages after upgrading to snow leopard on 10.6.8

Can't open Pages after upgrading to snow leopard on 10.6.8

Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

Check the Epson web site for updates to drivers and Epson scan software.

WiSM can't function normally after upgrading from vesion 6.0.182 to 7.0.220.

I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.
When it was unstable, I found three strange condition
1. A lot of log looks like this
*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)
*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'
2. Internal Temperature was showed "sensor failed"
3. CPU User load is Zero
Anybody can tell me what wrong with the wireless controller ?

Could be a hardware failure.

I can't load modules after upgrade

I can't load modules after upgrade xfree 4.4.0-2, gcc 3.4.0-1, perl 5.8.4-1 and kernel 2.6.5-3.I don't have even access to the internet from Arch.System says that modules have invalid version.
What can I do now?

You were right robot5x. After command lilo I have got modules loaded properly.Thanks.

HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

Check the Epson web site for updates to drivers and Epson scan software.

After upgrading to Acrobat X Pro, having problems editing text

I just upgraded to Acrobat X Pro from Acrobat 8 Professional. I've opened a document (created in Acrobat 8) and when I try to edit the text, it all seems fine until I try to save it. Then the formatting goes awry. The spacing between paragraphs disappears and the document is one solid block, so to speak. I've tried various methods of text editing/saving but nothing seems to work. Any thoughts? Thanks.
russ

While editing is allowed its just meant to correct a misspelling here or there. Not whole sentences. Another thing that can affect light editing of PDF with Acrobat on OSX.6.7.
On some applications bad fonts (use FontBook) to verify your fonts. Open Fontbook without any applications on (such as acrobat, Reader, Ms Office). select all fonts. in click on box that shows fonts. Randomly select a font. The hold command key(⌘) press A, that selects all fonts. Look for and use Verify Fonts. Any fonts that can not be verified, or repaired with a Font reair Program should be removed.
also while all fonts are selected, look for an use reconcile Fonts. This looks for Duplicate fonts. In some cases the same application would use one version one time andanother another time thus causing spacing problems. click on each one found and see which is duplicated. Disable the oldest version.
do this with all duplicate fonts found.
If the above corrects the problem, locate disabled fonts, User >Library >Fonts disabled and Main Library Fonts disabled remove to desktop Make archives and place archives in safe place( in case you need to swap fonts).
Next if you have X.6.7 Install this Patch: http://support.apple.com/kb/DL1377. This corrects some font problems caused by the OSX.6.7 the update that affects Adobe Products, (such as Acrobat, Reader Indesign and others, As well as Microst Products for Mac)

Can't add/edit contact after upgrade to IOS5 - HELP!

After upgrading to ios 5, I can't add or edit the contact. The buttons are gone! How to get them back? I tried numerous restart also no use.

I was having issues with Calendar after updating to iOS 5.0.1 also. I finally was able to get Calendar functioning again by turning it OFF within Settings > iCloud. This action keeps all my calendars on my iPod. I also reverted to backing up my iPod Touch to my computer within iTunes, then restoring, and re-syncing after I made the changes. Now, I am able to add, edit, and delete events in my calendar just as I was able to do before updating to iOS 5.0.1. Restoring my iPod Touch only worked temporarily for me (before I change the settings), as the problem returned the very next time I attempted to add an event. This fix probably will not allow syncing with other Apple devices through iCloud, but it is less drastic than deleting my iCloud account.

Cannot display 3D models after upgrading to Acrobat 7.0.7

After upgrading my copy of Acrobat 7.0.5 to 7.0.7, I found out that 3D Models are not displayed in PDFs.
"A 3D data parsing error has occurred" message is displayed. In Edit > Preferences > 3D, the "Preferred Renderer" field is empty, and there are no items to choose from.
When trying to add a 3D model manually in Acrobat, the program crashes.
Did anyone have a different experience with 7.0.7? Any suggestions as to how to fix this? There is no option to remove 7.0.7 upgrade, only to reinstall it (which I tried; it did not make a difference).
Shlomo Perets
MicroType: FrameMaker training & consulting * FrameMaker-to-Acrobat TimeSavers
FM-to-PDF Assistants: Navigation, Form, Presentation, Defaults, Multimedia & 3D

I have learned that there may be an issue with upgrading to 7.0.7, selecting the "reboot later" option, and then trying to use Acrobat with 3D. The suggested procedure is to do the update and then select "reboot now" when asked. Upon rebooting your system, the correct plug-ins are copied into the running Acrobat directories and things should work properly. We will continue to investigate these types of issues with the updater, but I believe this procedure will help fix these types of problems.
Michael Kaplan
Director of Engineering, Acrobat 3D/Manufacturing

No PDF printer after upgrading to Acrobat X Professional

Hi, I recently upgraded from Acrobat 6 Pro to Acrobat X Pro (technically, an upgrade isn't possible but the Acrobat X Pro installer will uninstall Acrobat 6 and install Acrobat X). After performing the installation "successfully" I no longer have an Adobe PDF printer under printer and faxes. I'm running Windows XP SP3 (32-bit). If I uninstall X and reinstall 6 the printer comes back. But nothing I do can get the printer there under X. Am I missing something?
Regards,
Tommie

While editing is allowed its just meant to correct a misspelling here or there. Not whole sentences. Another thing that can affect light editing of PDF with Acrobat on OSX.6.7.
On some applications bad fonts (use FontBook) to verify your fonts. Open Fontbook without any applications on (such as acrobat, Reader, Ms Office). select all fonts. in click on box that shows fonts. Randomly select a font. The hold command key(⌘) press A, that selects all fonts. Look for and use Verify Fonts. Any fonts that can not be verified, or repaired with a Font reair Program should be removed.
also while all fonts are selected, look for an use reconcile Fonts. This looks for Duplicate fonts. In some cases the same application would use one version one time andanother another time thus causing spacing problems. click on each one found and see which is duplicated. Disable the oldest version.
do this with all duplicate fonts found.
If the above corrects the problem, locate disabled fonts, User >Library >Fonts disabled and Main Library Fonts disabled remove to desktop Make archives and place archives in safe place( in case you need to swap fonts).
Next if you have X.6.7 Install this Patch: http://support.apple.com/kb/DL1377. This corrects some font problems caused by the OSX.6.7 the update that affects Adobe Products, (such as Acrobat, Reader Indesign and others, As well as Microst Products for Mac)

Can you edit text after saving your file as pdf

I have recently created a letterhead in Illustrator.
Is there a way to change a person name and title after saving it as a pdf file? I heard something about creating a form in Acrobat professsional.
I need to print out a letterhead with different peoples name and title. Any help would be appreciated. Thank you.

Can you edit the text in Acrobat Reader?
Yes, if you use Acrobat Pro to save the PDF as a Reader-enabled form.
1. Create your letterhead in Illustrator (or whatever). Leave design space for, but do not create text objects that you want to be editable.
2. Save as PDF.
3. Open the PDF in Acrobat Pro. Use Acrobat's Form tools to add text fields whereever you want the end users to be able to key text.
4. Select the Enable Reader Usage Rights command in Acrobat to make the form fields edtiable in Reader. Save the file.
Recipients of the PDF can now open it in Reader, edit the content of the fields, and save the file with their edits.
JET

Can't edit form after upgrade to Acrobat XI

Similar Messages

Maybe you are looking for