Can't edit home page

When I select "edit page" on the home page I get an error message (in both CS3 and CS5; I just upgraded because I thought the problem might lie with an incompatibilty with the old version). I have no problems with any of the other pages on this web site. There's no open draft of the page at the time. Help!?!

Thanks for trying, but that doesn't work.
I'm the administrator, owner, and sole user. When I click on "administer websites - manage sent drafts" there are no entries in the manage sent drafts box. And I can't "send for edit" or "send for review" because I have to get a successful response when I click on "edit this page", and that's where the trouble originates.
I've used "save as" to save the page with another name and managed to edit it, but then I can't save it under the "proper" name (which would be index.htm) because I get an error message saying that file name already exists, and I'm not given an option to replace/rewrite the existing file. So I've been unable to publish the new page to the server so that it can see it with my browser. I still get the old version with the browser.
I can't even delete the page (in order to replace it with the new one) because I get that same message error "You can't edit this page because is editing it".
I'm now trying to manage page expiry to see if I can get rid of the original page that way...
Any other suggestions will be most welcome!

Similar Messages

How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??

How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??
== This happened ==
Every time Firefox opened

Firefox can have multiple home pages if you wish. Each home page that will open when starting Firefox is separated by the "|" character.
See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
To have new tabs open a specific web site, add one of the following extensions:
http://sogame.awardspace.com/newtaburl/
https://addons.mozilla.org/en-US/firefox/addon/777

Can't Edit this Page ..already editing on another computer

So, I was Editing a Page and went to Publish it, but it
couldn't Connect, so I hiit Cancel.
I tried again to Edit the page, when up pops this message in
a Yellow Box.
"You Can't Edit this Page now because you are already editing
it on another computer. Please contact your webmaster "
[IMG]http://i11.photobucket.com/albums/a173/JoeWood_/Misc/Contrib.jpg[/IMG]
<a href="http://photobucket.com"
target="_blank"><img src="
http://i11.photobucket.com/albums/a173/JoeWood_/Misc/Contrib.jpg"
border="0" alt="Photobucket - Video and Image
Hosting"></a>
The problem is, I don't have a webmaster anymore, so, how can
I correct this so that I can Edit my Page again?? I have my
Contribute Key (I think) and probably have the password ..

Go here:
http://www.adobe.com/support/documentation/en/contribute/
Download "Using and Administering Contribute" PDF and page
229 has your answer step by step.

Can Not Edit JSP Page

Running SJSC2.1 on XP
I have a project which uses tables and DB
I can not edit the JSP page (the tab for the Page1.jsp page has an asterisk) after the name.
The IDE can not edit the page either, I add a table column for display and the design mode shows the added column but the JSP page does not show the new column, nor does the new column show when the app is deployed..
I can edit the file with wordpad outside of the IDE
What gives???
Thanks

Actually, I did say that I am able to edit the file and save it in WordPad..
Outside of the IDE..
Thanks anyway...
I have restarted the IDE, Rebooted the system (which reboots the app server) made sure there are no "hanging" "app module" entries in the domain.xml file...
Anybody know why the "*" is shown with the filename on the SJSC Design tab..
There was also a series of very small "red somethings" to the upper left of the file name in the Files> listing
The red somethings looked like:
| | | |
| o |
I have no idea what this red something is.. I thought if might say something but even with a magnifying glass it is unreadable, if in fact the somethings is text
Thanks
any help would be appreciated...

Can edit home page but not other pages of website. Can anyone help?

I've just installed Contribute CS5 and tried some editing of my website. I found that I can only edit the home page. When I go to the other pages the draft that is created doesn't show my images and I also can't get into the page to do anything. On top of the draft page there is something like a small logo with the letters "php" and the curser stays there. Does anyone know why that is and what I can do to make it work? And if yes, can you explain it to me as if I was 3 years old, please. Thank you.

It is pretty easy but it should be considered more of a content management system rather than a basic web editor (even though that's what it does). For example, we have 25 content posters that use Contribute. They know basically nothing about building websites so we use Contribute so that they can do limited things on the site. But it still takes us using a different tool in the background to keep the site up and running.
The unfortunate news is, unless you know PHP language, your site will be a bear to work on. It's a scripting language so, much harder than HTML.
Your site really wouldn't be to hard to rebuild in HTML if you have some experience with building websites from scratch. If you know HTML, you can use one of many low-cost HTML editors out there. If not, you'll need to use a tool like Dreamweaver but even then, it helps to know HTML in case something goes wrong and you have to dig in and find the problem.
Your other option would be to hire someone to build a new site for you. This time, let them know you will be using Adobe Contribute to work on the site so that they can put it together properly.
Not sure why it was built in PHP to begin with.
Good luck.

Cannot launch 10g Express Edition Home page

I have installed Oracle 10g Express Edition yesterday,but cannot launch the home page.My browser is Firefox.Following msg is displayed,
Unable to connect
Firefox can't establish a connection to the server at 127.0.0.1.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
I have tried by disabling antivirus protection also.I am using Home Standalone PC.
Pls. help.
Trips

I have this same problem after installing Oracle Database 10g Express Edition in Windows XP Professional SP2. Here is the result of lsnrctl status:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
U:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 31-JAN-2007 12:46
:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 31-JAN-2007 12:21:49
Uptime 0 days 0 hr. 24 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAARONSON.corp.company.com)(PORT=1
521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
U:\>
Here is the ouput of ipconfig:
U:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : SAARONSON
Primary Dns Suffix . . . . . . . : corp.company.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.company.com
company.com
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.56.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.180.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Cont
roller
Physical Address. . . . . . . . . : 00-12-3F-57-D2-BD
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.11.230
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.10.3
DNS Servers . . . . . . . . . . . : 10.10.11.246
10.10.11.248
U:\>
Can you please advise what to do here?
Thanks,
-Seth
P.S. I edited the domain in the ipconfig to save just a little anonymity.

CS4 & CS5 will not edit Home Page. All other pages edit fine.

Called tech support and they said to make this duplicate post, so I will. I am using CS4 Trial in XP 32 bit, and CS5 Trial in Vista 64-bit. Neither version will edit my home page. All other pages edit fine. http://www.audiofilesolutions.com.
I have checked to be sure I am listed as Admin on both versions.
When trying to edit the home page, all text and content collapse and will not allow editing. Very top and very bottom menu bar remain. Here is a pic.
As you can see above, there is nothing to edit other than the top and bottom hyperlinks.
Here is a pic of what the edit view should show. This is another page and not the home page.
This is a freshly designed site and I can't edit it until this is resolved. Any help is appreciated.
Thanks.

Hi Robbin,
The code in the index page needs some correction.
Then it renders fine in Contribute in Edit mode.

Can't access Home page on XP, with sqlplus connection is OK

Version: Oracle 10g Expression Edition
OS:XP
DB connect with sqlplus : OK
Home page access failed:
I tried
http://127.0.0.1:8080/apex
http://localhsot:8080/apex
http://<myIp>:8080/apex
I can use it before, but one day it doesn't work.
There is a Mcafee installed on my OS, I don't know if there is any relationship.
Pls help

Run a lsnrctl status there should be an endpoint for http, if not either the database is down or the parameters needed for the XEXDB service aren't correct:
$ lsnrctl status
Listener Endpoints ...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))

Can't access home page

After installing oracle xe, I'm not able to access the home page.
I tried looking at other posts regarding this subject and can't find an answer to this problem. Here's lsnrctl status results. Also, netstat does not show port 8080 in use.
H:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-MAY-2006 11:0
:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
ction
Start Date 22-MAY-2006 10:56:58
Uptime 0 days 0 hr. 4 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File c:\oraclexe\app\oracle\product\10.2.0\server\network\
dmin\listener.ora
Listener Log File c:\oraclexe\app\oracle\product\10.2.0\server\network\
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CEAR.corp.snocap.com)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Additionally, I'm seeing the following errors in sqlnet.log:
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 22-MAY-2006 10:57:16
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

Hi,
this brings the error:
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'C:\Programme\oraclexe\app\oracle\product\1
0.2.0\server\dbs/spfileXE.ora'
ORA-27041: unable to open file
OSD-04002: Datei kann nicht ge┐ffnet werden
O/S-Error: (OS 2) Das System kann die angegebene Datei nicht finden.(the last lines say: "unable to open file" and "System unable to find file")
Which makes perfectly sense, because there is no such file, and nowhere else, too.
Seems that no database scheme and instance where created while installation.
[s]Is there a chance to do this after installation, i tried the installer now the second time, so i don't see a chance in reinstallation for the third time?[s]
The third installation worked out and now the database is running.
I still don't now what i did wrong before (since i did the same), but who minds if it works now...
Thanks!
Message was edited by:
user511416

Can't save home page in A D's My Settings

Hello,
I can't save my home page in My settings, if there is a www in the link is it perhaps prohibited?
I get the red error stating the link must be shorter then 80 characters,
It's well under 60..
Any thoughts or help would be appreciated.
Thank you.
Maria
p.s. I find it interesting that my points keep changing Eme (3155) to Eme (3160)
and back ODD eh
Message was edited by: Eme

Rachel I would just as soon not post the link here, but thank you.
Ali I suppose that means I earned 5 points in one of the "other" Safari forums
woo hoo I rock!!
Thank you for your reply Mark and everyone here.
Cheers,
Maria - eMe
Message was edited by: Eme - to get me 3rd smiley working!
ahh there it goes.. wish I had more stars!!!

I can't edit multi page PDF file in Illustrator at once.

I made 30-page PDF file in Illustrator last week.
Yesterday my co-woker eited and sent to me.
but i can't open 30-pages all in once
instead of this window pops up and only 1 page of all open it.
How do I open all the page and edit it once without any script?
Last week I Could open it without asking.

Keep a backup of the .ai file. Your coworker should not be making edits to pdfs, only commenting tools. Tell your coworker not to do that again, unless they know what they are doing (eg: are creating from scripts). If they persist, or this is your boss, lock the PDF with security protection.
This script may help you. Keep in mind the popular pdf preset smallest file size converts to RGB, so your color will change and l;ayers possibly flattentin if Illustrator editing capabilites is lost.
https://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1698047

Can't Access home page on Windows XP...how to re-install?

I installed Oracle XE on a windows XP machine and it's not working. I believe the issue is that I log into my machine on a Windows domain, but I installed XE while at home and not connected via it. I then saw the note on the Oracle site about making sure you are connected to the network before installing. So I uninstalled and re-installed to solve the problem, but still can't get to the home page. Noting is running on port 8080.
How do I uninstall and re-install or otherwise correct this problem once I've had a bad install?
Thanks,
Don

Sorry for the slow response. I finally solved my problem. I can't explain why this works, but maybe this will help others.
When I typically log into my machine I log into a "kerberos domain" (for me "stanford.edu"). Our IT folks have set this up so that doing this also logs you in to the WIN domain as well, but you get an extra kerberos certificate for logging into other applications we commonly use.
So while logged into the kerberos domain, I uninstalled the "failed" installation of Oracle XE. Then I logged out (and rebooted for the heck of it).
I logged back in using the WIN domain (e.g. WIN/myusername) and ran the Oracle XE Universal installer.
It worked and the Oracle XS home page came up.
I logged out of Windows (and rebooted again for the heck of it).
I logged back in under my normal kerberos domain and Oracle XE continues to work.
Hopefully someone with more knowledge of Windows domains and authentication can explain why this worked.
Fyi...if I go to Control Panel > User Accounts, I can see an entry there with my username and the domain WIN. This entry has the groups ORA_DBA and Administrator. There is no other entry for the "kerberos" domain I usually log into (since it supposedly logs me into the WIN domain behind the scenes).
Good luck if you run into this problem

Bug i hope mozilla can fix. Home page sometimes gets screwed up. Due to Software idiots who tamper with it and other sites... let me explain...

Mozilla is awsome, but there comes often times such as now, DivX software asked me if i wanted to make BING my default home page. I of course said no. Well it set it to that anyways in firefox. Gee, thanks Divix and thank you microsoft for joining the ways of many adware jerks out there. Well anyways, I wanted to set it back to firefox default. Well i can't. I click that button over and over click save it keeps it at bing. I really hate bing. I like google, but i also love that firefox logo i get each time i click the home button. So now like usual, there is no way to set it back the way it was no matter how often i restart the computer the browser, click the "restore to default button" i'm now once again stuck with a seach engine on the firefox page that i hate so much. The only way to fix this is to uninstall firefox, including all add-ins and plugins, and all private stuff, to completely remove it, then reinstall it. man i am so tired of this just cuz some developers are too lazy to respect the work of other developers and consumers to now force their gibberish into my favorite web browser. Can Mozilla possibly fix this so there is no possible way any developer could ruin it for me any more? I really just like the fresh default page, with the Firefox logo and Google as default. Thanks.

There are many loaders that change settings without asking.
Book mark this;
'''Download the [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
This add-on is very simple: on installation, it backs up
and then resets your search preferences and home page
to their default values, and then uninstalls itself. This
affects the search bar, URL bar searches, and the home
page.
And check this out;
'''[https://addons.mozilla.org/en-US/firefox/addon/settings-guard Settings Guard for Firefox]''' {web link}
Detects and resets changes to settings that are frequently done
by add-ons and application installers.

How can i edit photo page?

I´ve tried to figure out a good way to display my photography portfolio using iweb, but I haven´t found a good way to do it.
What I want to try is using the photopage, but with modifications. I would like to remove the numbers indicating how many images there are, and place a selfmade button for next and previous. Is this possible?
Can I edit the text, font and color?
Can I edit the size of the photo?
Thanks!

Yes. You set the photo size in the FAE export, upload the folder that's produced to the server and then use iFrame code in an HTML snippet to add to any page you'd like. I suggest you create a test site that you can use to experiment with, publishing to a folder on your Desktop to see how it works before adding to your site. Once you get it like you want just copy the snippet form the test site to the page in your regular site.
What should I add to what codeplate to get the autoviewer and not the postcardviewer?
You select the theme when you go to export the photos from iPhoto via the File->Export->Flash Album Exporter menu path.
Click to view full size
OT

How can I change home page setting

My home is somehow locked on yahoo as its home page. This happened after a technician needed my computer to work on Xfinity to give be wireless in my new home. I have know idea what to do, and I tried the steps you list in trouble shooting and they did not help.

Sorry my English!! I hope you can understand
Try this,
Go to the url bar and type "about:config" press Enter two times.
In bar locate, type "browser.startup.homepage", in this option click with right button of mouse and click on "restore default"

Can't edit home page

Similar Messages

Maybe you are looking for