Can´t edit or trash files on my NAS – (Error code -36)

I have all my files on a NAS. I have got a problem - I can´t trash any of the files via finder (tried Mac OS X 10.7 and 10.5). When I try I get this message: "The Finder can’t complete the operation because some data in “FILENAME” can’t be read or written. (Error code -36)"
I can change name on files, I can open, but not edit. I can put new files on the share and make copies, but can´t trash och edit files. I have searched for a solution but haven´t found anything that works.
I can via the nas own Web file Manager trash files but not from finder.
If I open an rtf-file, it says that it is locked in the titlearea, but its not locked if I shows "info" on that file in finder.
I can download any file of the nas to edit in the mac but not as long as it´s on the nas-share...
Please help... I´m geeting desperate...

Update:
I have found what makes the problem appear, If I configure the Qnap to not "Enable Network Recycle Bin", then everything works, but when activated same problem. I have tried everything with access rights, but nothing solves the problem when Network Recycle Bin is activated. This is strange because before I reformated the drive to begin from scratch this worked…
Update 2: A new firmware 3.6.0 was released today - Installed it and it fixed the problem!

Similar Messages

TS3297 I can't empty the trash. I keep getting error code -8003, I have tried the terminal methods including both sudo and chflags. The apps that won't delete are

I can't empty the trash I have three different versions of Quicken Essentials that should have been deleted and also some iskysoft apps [two ]. I tries to delete them but I always get a -8003 error. I ve tried using the terminal with both the sudo and chflags methods. No effect. Can anyone give a method that would work to delete the five? In advanced appreciation.

Hey donnie90,
It seems like this article might be the best for helping you address this issue:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
Thanks for coming to the Apple Support Communities!
Regards,
Braden

How can I edit an html file in Firefox using View Source?

I have created an html webpage and saved it to my pc. I can't edit the html file in firefox when I right click on the page and select "View Source". I can view the code but I can't edit it. I can do this in IE9.
I thought I was able to do this before in Firefox.
Did my settings change somewhere that I can no longer do this?
Do I have to have something checked in the Web Developer extensions for it to work?
I'm using Firefox 24.0
Thank you for any help with this. :)

The View Source window in Firefox cannot be used to change computer codes. Nor can the Web Developer tools.
Sorry for any inconvenience.
I suggest using Programmer's Notepad.

Found Audacity for my background noise. Can I edit my audio files in the FCPX event folder in Finder?

I think I found the solution to my background noise problem using Audacity.
But can I edit my audio files that are in FCPX Event folder in Finder? Or do I actually have to edit my project all over again to put in new audio (edited by Audacity)?

No, copying the whole Project and Event is just too much of a waste of time.
Do this, in the Browser, select the audio file you need to take to Audacity. Export it as a Master File, and in the Settings section of the Share window, set Format to Audio Only. Set Audio File Format to AIFF. Set Open With to "Other" and select Audacity. Then pick your Desktop as the location to save the file.
In Audacity, do whatever it is you want and save it.
Back in FCP X, import the new "fixed" file, be sure to check the box to copy it to your Event folder.
Finally, if necessary, do a Replace edit with the new version to the old one if it has already be edited into a Timeline.

I can´t edit the text files with SAP BODS 3.2

Hello
I can not edit some text files 9-20 megabytes to replace two words in each file, the source is a text file and the same destination but with different name, because with the same name have been unable . My idea is to remove the original and stay with the new performing edition but that if he does , let me file this way:
SALES_ORDERS_FULL_20140223_150051_006.xml ( ORIGINAL )
should leave it with me so : SALES_ORDERS_FULL_20140223_150051_006.xml _OLD (AMENDED )
but strangely leaves me so :
MICROSOFT_SQL_SERVER_KCC-BI_REPO_KHSA_XI_REPO_KHSA_XI_1543_5434_2_3_Long_INVOICES_INCREMENTAL_20140225_034004_001_xml_dat.txt (not deseased)
The type of data you use is long since varchar not allow me because it cuts my data file , use varchar (50000000) but takes the information and short .
I am using long data type , modify the file and I pass the name of the text files of sap bods for global variables. They are a series of files that are called by a while loop
Thanks for your answers
regards

HIr
Yes, first I convert long_to_varchar for edit, and convert varchar_to_long.
I edit before before and later
Thanks

Can I edit the system file Manifest.XML in Word for Windows? (there's a reason for doing this)

I renamed a file directory containing several PDFs. Consequently, Adobe Digital Editions says these files are missing when I try to open them and look at notes I made. There seems to be an obvious solution, but I'm unfamiliar with XML and don't want to screw things up. The file locations and a lot of other information for Digital Editions is in an XML file called Manifest. If I can edit the XML file to show the correct directory, I expect I'd be able to see these files and recover my notes. I'm unsure what Word for Windows may do (e.g., add or delete characters) when I edit and save the new Manifest. That might corrupt the Manifest and be extremely counterproductive.
Is editing the file locations in Word for Windows safe, so long as Digital Editions isn't open when I do my editing?

I can confirm that Notepad++ can happily edit manifest.xml files, but as Jim_Lester says, make a backup (especially if you are not used to XML).
You may well find that if you Open the .epub files from their new location explicitly from ADE (ctrl-O) that you will both be able to read documents and see the notes.
I can't vouch for that; but if it works I'd recommend it over editing the manifest file.

How can I edit my PDF file on cloud?

I cannot figure out how can I edit my PDF file on Acrobat Pro cloud version.

Hi abulr60330783,
I've checked your account, and couldn't see what version of Acrobat that you have. You may be referring to the Acrobat DC which Adobe announced this week, but that isn't available just yet.
So, for the time being, you'll need to use Acrobat Pro XI or earlier to edit PDF files. You can download a 30-day trial from http://www.adobe.com/products/acrobat.html.
Best,
Sara

How can I edit a pdf file without converting it?

How can I edit a pdf file without converting it?

Hi there,
To edit a PDF file in the PDF format, you need Adobe Acrobat.
-David

How can I edit VOB Video files in imovie 09?

Hi Everyone
I wonder if you can help? How can I edit VOB Video files in imovie 09?
Thanks

Handbrake is good, give it a go.
http://handbrake.fr/
You may want to create another topic about the other issues if you want some help with them.

How can I edit /etc/mnttab file of a running Solaris 10 Machine?

Hi All,
How can I edit /etc/mnttab file of a running Solaris 10 Machine?
Any ideas, solution, suggestions.
Regards,
Rahul.

Hello Roach,
First, thanks for your quick response.
I am using a Solaris 10 (Sparc ) machine , I want to make sure that no set uid programs get executed in /tmp partition.
Currently I am modifying the value in /etc/vfstab to and adding the value in Mount Options as nosetuid, and restarting the system as a result when the system is rebooted the /etc/mnttab entry is populated accordingly and setuid programs are not executed in /tmp partition.
But I want to avoid the reboot.
I am planning to update the /etc/vfstab as well as /etc/mnttab file directly so that the reboot can be avoided.
I found some function related to /etc/mnttab i.e
(i)getmntent
(ii)resetmnttab
I will go into more details about it now
Regards,
Rahul.

How can i edit an adobe file

how can i edit an adobe file free of charge?

in the originating software that the PDF was created from. Acrobat is not a very good editor just strictly meant for very minor touch ups.
Duplicate words very small missing words, misspellings

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I wanted to empty the trash but I get an error code -8003 and I can't continue. What's up?

I wanted to empty the trash but I get an error code -8003 and I can't continue. What's up?

Hi pete down under!
Here is an article that addresses this issue and should be able to help you resolve it:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I tried to empty my trash and could not - an error code 8003 showed up and stopped me. What can I do to empty the trash?

I tried to empty my trash and could not - an error code 8003 showed up and stopped me. What can I do to empty the trash?

Look to the right under 'More like This' - many good sugestions there.

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

Can´t edit or trash files on my NAS – (Error code -36)

Similar Messages

Maybe you are looking for