Can't Eject Drive on the Desktop

I was working with a USB stick plugged in and simply forgot to "eject" before I pulled the USB stick out. The "Removable" drive icon disappeared of course, but in doing so there was a new folder icon named "Removable" left behind on my desktop. This new folder icon cannot be "trashed" or "ejected". What is also weird is that the new folder is listed as a drive in my Finder window with the "eject" button next to it - that does not work either. It does not appear in Finder as file folder - even weirder. I have also tried restarting. Nothing seems to work.
Is there anyway to get this useless "Removable" drive (that is a folder icon) off my desktop??

Hi
Here is a link to Apples document on how to eject a disc when all else fails.
http://docs.info.apple.com/article.html?artnum=106752
The other option to try is to reset the PRAM.
http://docs.info.apple.com/article.html?artnum=2238
And reset your PMU.
http://docs.info.apple.com/article.html?artnum=14449
Just check the model of your PB.
Phil

Similar Messages

  • I recently put a dual layered DVD in my iBook G4, by mistake.  Now I can't eject it by any of the proven methods.  My iBook doesn't recognise its presence, so I can't eject it in the usual way.  Any solutions?  Is it easy to open up the CD drive?

    I put a dual layered DVD in my iBook by mistake and iBook can't read it.   now I can't eject it.  It isn't recognised by the computer, so I can't eject it in the normal way, using Disc Utility or Terminal or whatever.  Any suggestions?  Is it easy to open up the CD drive on an iBook G4?  Any help gratefully received.

    So if baltwo's suggestion doesn't work there is a similiar command in open firmware.
    "It's Cmd-Opt-O-F to get into Open Firmware. Type "eject cd" once you get in."
    That's from nermal here:
    http://forums.macrumors.com/archive/index.php/t-176460.html
    They also talk about the optical cable and that might be worth checking out.
    Exactly which iBook is this? Speed and size?
    The service manual for the 1.2 GHz 12" describes the procedure for removing a stuck drive. It involves removing the drive and opening it up (4 screws).
    To remove the drive the preliminary steps are:
    remove the following:
    • Battery
    • Keyboard and RAM shield
    • AirPort Extreme Card
    • Memory card
    • Bottom case
    • Bottom shield
    • DC-in board
    • Top case
    • Top shield"
    The reason I ask about the speed is that it's possible the earlier drives are different. In the PowerBooks there was a release on the right side of the slot. It was a small bar you pressed with the proper tool.
    Richard

  • I deleted my desktop icon - now I can't save things to the desktop!

    After a complete meltdown of my computer (and thank GOD I backed everything up!!) ... I'm transferring everything back to my iMac from an external drive ... BUT, I deleted the little "desktop" icon from my finder folder - or more like, I dragged a desktop folder from the external hard drive and "replaced" the desktop icon.
    Now I can't save anything to the desktop. When I drag something to the desktop it says "The item cannot be moved because the 'desktop' cannot be modified."
    Is there a way to get this back???

    No ...
    Under "Ownership & Permission" is says "You can - Read & Write", so that's not the issue.
    What I did was:
    When you open the finder window, there are several icons that appear in the window - usually the Desktop icon, the Home icon, the Applications icon, the Documents icon, the Movies icon, the Music icon and the Pictures icon.
    What I did was, I dragged a "Desktop FOLDER" over from an external hard drive and it asked me if I wanted to replace the Desktop. I said "Yes" and now I no longer have the DESKTOP ICON on the left side of the finder window and I can no longer drag and drop things to the desktop.
    The desktop icon no longer exists, so I can't access my desktop VIA the finder window.
    Does this make sense?

  • I want to see my hard drive ON the desktop, please!

    I'm not sure why it seems that Apple wants to "simplify" things to a point that the results can become unfamiliar to the typical Mac user, like myself.
    Just got finished looking at a document online about where to find the hard drive, and wasn't real thrilled about it. I like to be able to access the hard drive from the desktop. I am not the Finder Window menu type of guy!
    If someone can aid me in placing the hard drive icon on my desktop WITHOUT me having to install Tiger (default installation disc), that would be great.

    I do not see it on the dock; oh, and I forgot to mention, I recently reinstalled Snow Leopard.
    Also, it seems that there isn't an option to have the hard drive displayed on the desktop, by right-clicking or whatever.

  • HT2491 how to show macintosh hard drive on the desktop

    how to show macintosh hard drive on the desktop in apple macbook pro,n how can i install my canon scaner with printer on mac,i am new user,regards,dr.m.imran

    Thank you for these directions. I just created a new user account and couldn't believe the hard drive was not viewable on the desktop. It seems by default the hard drive should always be viewable on the desktop. By having absolutely nothing on the desktop when making a new user I was freaking out thinking my Mac had a bug after the OS updates.
    Thank you for the directions on how to show the hard drive on a new user's desktop.

  • Yesterday I moved a folder from my portable drive to the desktop of a computer called B3. The folder

    Yesterday I moved a folder from my portable drive to the desktop of a computer called B3. The folder contained four tiff files and 16 PSD image files that I had been Photoshoping for two weeks. I dragged the folder into bridge for a quick look. Most of the fliles had been processed in Lightroom 4. When I opened the first image in PS all of the layers were gone and the image looked like it had never had anything done to it. All of the PSD images opened with the same result, no layers, weeks of work gone. I took the portable drive and plugged it into my labtop. All of the layers were there. What happened? there was no older version of the file on the drive.

    Actually that would not have had any impact. When I processed the files in Lightroom there was a software glitch and they would not open as PSD 's inPs they appeared as raw files in PS. Yes I know how to set preferences. Ok to get around that one I exported my files as PSD into a folder. After I always opened them from the folder so I don't see how the XMP files could be an issue. Also remember for two weeks I had been working using the same procedure with out any trouble@bdentonphoto: RT @Patrick_Baz: @patrickwitty: Brutal, important frontpage of the @guardiannews, heartbreaking photo from the massacre in Houla, #Syria http://t.co/7411qhUf
    Sent from my iPhone
    Andrea Star Reese
    Photojournalist based in New York
    currently in New York

  • How can I delete icons from the desktop? every time I open a application (e.g. skype) the icon goes to the desktop

    how can I delete icons from the desktop? every time I open a application (e.g. skype) the icon goes to the desktop

    to remove the HD icon
    In Finder's Preferences pane, in the General tab, uncheck "Hard disks" under "Show these items on the Desktop" to clear away the icon.

  • Can't move files from my external hard drive to the desktop?

    Hi folks, for some reason I am unable to copy files (irrespective of type) from my usb 2 external hard drive to my desktop. This is only a recent thing. Up until a few days ago I was able to transfer files back and forth without problem. Now it is only possible to move unto the harddrive and not the other way around. The harddrive is formatted in Mac OS Extended (journaled). I have tried running disk utility to repair the disc on both external and internal drives, and it advises me that no repairs were necessary. I have also checked the info and read and write is permitted and none of the files are locked. When I attempt drag a file off the harddrive to the desktop the cursor turns into a stop sign (circle with line through it). If I attempt to copy and paste, the file copies and then will not paste as "paste" does not appear in the contextual menu. I have had some limited success by dragging files off the external hard drive to the trash and then dragging then back out of trash unto the desktop. But this only seems to work sometimes?
    It would be great if someone could suggest a reason and solution for this. Thank you in advance.
    Jono

    Sure sounds like permissions are goofed up somewhere. You weren't really clear about exactly what you had checked. Since you can copy TO the drive let's assume things are OK there. How about your Desktop folder? Did you check it with GetInfo to make sure you are the owner and have read and write permissions to the Desktop folder? I have seen these get messed up before.
    Francine
    Francine
    Schwieder

  • Blank Disc in drive did not register as being in the drive and so I can not eject it even the ^ button does not do anything.

    Blank Disc in drive did not register as being in the drive and so I can not eject it and even the ^ button does not do anything.

    CD/DVD - Eject Stuck
    CD/DVD - Eject Stuck (2)
    CD/DVD - Eject Stuck (3)
    CD/DVD - Eject Stuck (4)
    CD/DVD - Eject Stuck (5)

  • Cannot see my external hard drive on the desktop

    Hi,
    I am at the tail end of a large documentary project on FCP. Suddenly, this evening my external hard drive (Maxtor One Touch III, Turbo Edition, 1.5TB) becomes sluggish. I shut down (all properly) and restart and the external hard drive is no longer on the desktop (does not mount and cannot be seen anywhere).
    I change ports (from one FW400 to another), try connecting to a different Mac (was running on an iMac, try connecting onto a G5) and still cannot see the hard drive. I try connecting using USB2 and still cannot see it on the desktop. I run disk utility and the hard drive shows up in menu on the left, I am able to run "verify disk" as well as "repair disk" - hard drive is fine, no errors no problems. However, I still am not able to access the drive - just does not show up on the desktop or anywhere else where I can get into it. I run the install disk that came with the hard drive (Maxtor) and a backup utility can detect the drive and shows that 1.37 TB of data is safe (so no data loss) but I can still not detect the Hard drive. I also noticed that the light on the hard drive is active indicating that the drive is being accessed.
    Problem is simply that both my Macs do not show the drive regardless of how I connect them to the drive (FW400, FW800, USB2 and every port has been tried).
    Need help here...please....
    I realize this might be more suited for a general OSX or Hard drive issue, but since I have always got great answers from FCP users that I am posting this question here.

    Hello all,
    Thank you for all your comments and suggestions. I downloaded Disk Warrior 4 from Alsoft - paid $108, followed the instructions to the letter (after reading and rereading sevral times) and ran the utility...it detected the Maxtor HD, pointed out several errors, repaired the errors, and then gave me the option to preview the new and compare to the old HD...this is where things went wrong. There was no HD to be seen - new or old...same problem. HD is not visible on my Finder, on the Disk Warrior Preview or on the desktop. I went ahead and rebuilt the HD...all errors fixed, Disk Warrior states that all is fine and dandy and that my hard drive should be perfect and I can access it...BUT its still not there, I cannot see it on the desktop nor anywhere else.
    It shows up in Disk Utility as a page icon - but I cannot access it.
    So, unfortunately for me...my problem still remains and I am now out a hundred bucks!
    Please, anybody out there - who can give me some direction - I would greatly appreciate it.
    BTW, the data is still all there and the light on the front of the drive keeps flashing indicating something is going on...but drive is not mounted, invisible.
    I read on the Maxtor packaging something about a built in Maxtor DriveLock - a password protected security measure against theft and loss...could I have inadvertently activated that and that is causing the problem...please advise.

  • Mounting drives on the desktop for all users

    Hi
    Is there a way of mounting drives ( like USB pens) on the desktop for all users please?
    It's a causing a lot of confusion here... you think the USB drives aren't working when you can't see them being mounted in front of you.
    I do realise you can set this in Finder/Preferences but I wondered if there were a way of just making it the default for any user that logs in ( whether locally or to the domain).
    Thanks for your assistance.

    micromike wrote:
    Thanks for your help Barney.
    Hmmmm....why would anyone disable this basic thing?
    Here's a reason. I don't use the Desktop, so why would I want the drives to pop up on my desktop.
    They appear in my Sidebar in any Finder window.
    That's why I turned it off on my system. You'd have to ask the 1000 users why they turned it off.
    However, I'm not sure I understand what you want. If you mount a usb drive on your system, and share it out over the network, it is not a Hard Drive on any network user's desktop. It is a network share.

  • Can't even log into the desktop

    I got a crash or something last night when I opened 2 webpage loading with flash applications, and the system slowed down and then later on can't even get any response.(Still my mouse can move and the screen show the 2 pages without response) I couldn't click the force quit or restart it so I pressed the back button to force switched it off.
    After that in this morning when I turn it on again, It stopped at the loading page and couldn't get into the desktop.
    I tried several times reboot, and now when I turn it on, a floder button flash on the middle of the screen and I don't know what to do.
    Please help thank you so much.
    PS: I am not sure what my OS is, it's likely 10.4.(something)

    Hi konrinn, and a warm welcome to the forums!
    Could be many things, we should start with this since it is Disk Problems likely...
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Very Important, how much Free Space is on your Hard Drive first of all?

  • Nothing shows up on my Desktop. I can put a file into the Desktop folder but it will not appear on the DTop. The HarDrive is not on the DTop either.

    Nothing appears on my Desktop. The Finder seems to work, so I can place a file into the DTop folder, but nothing appears on the DTop, not even the HarDrive.

    You can temporarily hide the crap on your desktop. Edit the CreateDesktop key in com.apple.finder:
    defaults write com.apple.finder CreateDesktop -bool false && killall Finder
    Then, to get my clutter back:
    defaults write com.apple.finder CreateDesktop -bool true && killall Finder

  • How can I remove icons from the desktop on my iPad Mini?

    I understand that there are apps on my iPad that I cannot delete, but is there a way of removing an icon from the desktop?

    Remove, but not uninstall from the device?  Where would they go if you did that?
    Once you delete an App it gets removed form the homescreen, and deleted from the iPad.
    There is no "Less used Apps" area or anything like that.
    Everything you have, and you can access, is on the home screen. There is no other place to access Apps. 

  • Why can't I print to the desktop PDF printer from a PDF file?

    I don't know how much more info I can provide.
    Sometimes I want to print one page of a multi-page .PDF document (to the desktop pdf printer) and it looks like it goes, but never appears on the create adobe website.

    The CreatePDF Desktop Printer has been retired. Please see https://forums.adobe.com/docs/DOC-5131 for more information.

Maybe you are looking for

  • Why is my ipod touch not letting me on the wifi when I have the pssword and it is the first time I put it in

    Why is my ipod doing this please help me

  • Hardware Requirement  for APPS 11I and R12

    Hello experts, i want to purchase new laptop for practice oracle 11i or r12. please suggest me what should harware requirement, mainly processor and operating system. as i want to buy I3 processor with window 7 4 gb ram. 500 gb hard disc. but my frnd

  • No Idocs in XI

    Hello..        i'm unable to c idocs in XI...do we need to maintain same name for RFC in XI  as like as in SAP.. Else How XI pick the idoc from which port and RFc? Thanks..

  • MarshalException

    I am trying to write a Java RMI client/server, but it doesn't seem to be working. The client has not yet been made, I was hoping to test the server first, but every time I do I get the following error: Exception in thread "main" java.rmi.MarshalExcep

  • How to Convert Latin Character into English

    Hi Experts, Can you please suggest how to covert Latin Characters into English like- ó to o, ú to u and so on.is there any FM ?? Logic: Jesúsó converted to --> Jesuso