Can't Eject IPOD Classic 80gig

I need some help and can't find any elsewhere so I am trying here. I can't eject my Ipod from Itunes without turning my computer off. It says that it can't eject because there is shared files on my Ipod. I deleated all files with Itunes and still got the can't eject due to shared files message. I try to restore to original settings and got the message that I couldn't restore due to shared files on my Ipod. Can anybody help me with this. I am using Vista 64bit.
Thanks in advanvce
Will

wwrice. I saw this thread and it helped me solve my problem. www.discussions.apple.com/thread.jspa?threadID=2385677
I hope this link works!

Similar Messages

Can't Eject iPod Classic in iTunes 10

After syncing my 160G iPod Classic with iTunes 10, I could not eject the iPod Classic in iTunes 10. It says the iPod is being used by another Application (when there is NONE except iTunes 10). I had to quit iTunes 10, and eject the iPod Classic via Finder Window. There were a couple of times where I had to perform OPTION-APPLE-ESC before I could eject the iPod Classic. Is there something wrong with this version of iTunes - anybody having same problem? Or could it be my PPC iBook G4? <Don't think so.>
With all the complaints I've read about iTunes 10 (yah, the icon does look horrible, Steve, despite what you may say - it looks soooooo 'bland'), I suspect it's the latest-but-no-longer-greatest software, iTunes 10.
Any suggestions/assistance is greatly appreciated.
Else, I may go back to the earlier version, where I had no problems at all.
Much thanks in advance.
Regards.

I'm having a similar problem ... nothing but problems with iTunes 10
In my case, my iPod nano is showing up as a device in Finder and even when I eject it from iTunes it remains in the Finder for some time. When I reconnect the nano then iTunes starts playing music, but the nano does not appear in iTunes (although it shows up again in Finder.)
I have to restart iTunes for the nano to show up again. Disk use is not enabled. I've also had problems with the nano occasionally showing up with the incorrect info (image etc.) in the Summary window.
I had none of these problems until I upgraded to iTunes 10 (other than it showing up in the Finder.)
I suspect it will not be easy to go back to iTunes 10 because iTunes 10 upgraded the iTunes Library (as far as I remember.)

How can I reset ipod classic when error message 439 shows?

how can I reset Ipod classic when error message 439 shows?

The easiest solution and apparently the only approved solution via Apple (although a pain if you haven't backed up your device) to restore the phone if you can't figure out the passcode. It will erase everything but if you have a fairly recent backup then you will be fine...you may only lose anything that was added after the last backup. You can also try searching the Apple Support pages and forum to see if there is another solution. Ultimately, it's a plus to a certain degree that there is no easy way to change the passcode....if someone "found" it and wanted to try to get in to it....but it's a pain when it's a situation like yours.
.https://discussions.apple.com/thread/3750135?start=0&tstart=0
http://support.apple.com/kb/HT4113#
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf pg 165

Can i syncronise Ipod classic & Ipad by using same Itune on same computer

can I syncronise Ipod classic & Ipad to same Itune by using same PC

jambhe wrote:
can I syncronise Ipod classic & Ipad to same Itune by using same PC
You can sync as many ipods/ipads/iphones as you like to the some library/computer.

Can i format ipod classic with NTFS file system on win7?

can i format ipod classic with NTFS file system on win7?

Not if you want to have an iPod as opposed to an ordinary external drive.
(60693)

Where can I find IPod classic games

Where can I find IPod Classic games?

Kmae12 wrote:
i mean it really makes me wanna take back my ipod classic...its just not as great as i expected it to be...i heard other brands are just as good if not better...245.00$ for an ipod...that isnt that great seems a little...unneccesary.
Since it's not that good and there are other brands that are just as good and bettter, I suggest you do return it.

Can't access IPod Classic when charging

Hi All...
I have 30GB Ipod classic. When I plug it into the computr to charge (USB), I see a flashing red circle with line thru it in the middle fo the screen with message Do Not Disconnect.
While it is charging I cannot clear this fromthe screen and listen to the stuff on the Ipod. Is there something wrong or is this by (very very very bad) design?
How can I listen to the Ipod while it is charging?
I tried to eject the device from systray icon, but when I do that, it stops charging?
Help please.
Thanks in advance.

Burger2go wrote:
I have 30GB Ipod classic. When I plug it into the computr to charge (USB), I see a flashing red circle with line thru it in the middle fo the screen with message Do Not Disconnect.
This is because the iPod is being synced to the computer, which means that it is being updated and the information on it is being changed. While that is happening you cannot do anything with the iPod. Once it has finished syncing, (when the message *iPod sync is complete - OK to disconnect* displays in the top of the iTunes window) you can click on the *Eject iPod* button which you will find in the bottom right hand of the *iTunes summary screen* (not the systray icon) and which will "disconnect it" from iTunes but allow it to continue charging. You can then listen to it while it is still plugged in and charging.
While it is charging I cannot clear this fromthe screen and listen to the stuff on the Ipod. Is there something wrong or is this by (very very very bad) design?
No, nothing wrong with it or the design. It is syncing as well as charging. If you try to "use" the iPod while it's being updated that would confuse it!
I tried to eject the device from systray icon, but when I do that, it stops charging?
That is not the correct (or best) method of disconnecting the iPod. As I stated above, you should use the *Eject iPod* iPod button.
By the way, there is no such model as a 30GB Classic, perhaps yours is a 5th generation or photo iPod? See http://docs.info.apple.com/article.html?artnum=61688 for information on identifying your iPod model.
Regards,

Windows Vista can't recognize Ipod Classic

I bought an Ipod of a guy yesterday. It's a classic. I did a lot so bare with me here.
It doesnt show up in Itunes.
When I turn off the ipod and turn it back on.
it says the device driver can't be installed and is unrecognized.
I'm installing Windows Servce Pack 2 as we speak in hope that an updated driver is in there.
Someone told me Ipod classics don't work with windows 7 period.
Someone help me!
Is the updated driver in a service pack?
Or what?
I just want to listen to music!
I uninstalled and reinstalled Itunes multiple times.
I don't want to keep doing it because it takes forever.
Do I have to download a older version of itunes?
What do I do?!?!?

Do this 5Rs first and tell me what you see on the iPod Screen, after charging the iPod and Reset
To do a Hard Reset
Charge your Ipod for at least 2 hours
Toggle the Hold switch, make sure you dont see the Red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Have a Nice day!

Can`t synch IPOD classic after 1.0.2 firmware

I just boguht an Ipod 160 GB 2 days ago. Using the firmware 1.0 I could synch anbd load about 1gb of music. The itunes asked me to update the firmware to 1.0.2 and the problems started from here.
After update, the itunes freezes, and ask for not disconnect while the ipod is not synchronizing. If I ask for eject, notthing happens... Tried to delete some repeated songs, and it freezes, just one and it freezes.
in a forum i found a way to downgrading the firmware to 1.0.1 It freezes as well the itunes, of course i think i couldn`t even update the firmware to newer versions...
Any help is appreciated, sinde i`m not in the states

I didn't think the new ipod classics would work with Windows 2000. I quote from the technical specifications:
Windows system requirements
PC with USB 2.0 port
Windows Vista or Windows XP Home or Professional with Service Pack 2 or later
iTunes 7.4 or later
I seems odd that your ipod worked with 1.0.1 then ran into a Windows 2000 issue with 1.0.2 I don't have an answer but it might be worthwhile to ask Apple about this.

Can't sync iPod classic 160GB

I recently purchased an iPod classic 160GB. I am running Windows XP with SP2,
iTunes 7.4.3.1, QuickTime 7.2 (I am hesitant to install iTunes 7.5 due to known problems with QuickTime 7.3). I had to go to my local Apple Store to get the latest iPod Software Update installed (56.6 MB is pretty huge; this Update for my iPod video was only 6.2 MB).
Problem Number 1: iTunes cannot successfully download an iPod Software Update (1.0.2) if the download has been Paused and then Resumed; iTunes loses track of the size of the module it was working on. (If there are buttons in the application to pause and resume the download, they should work correctly.) (This happens with both the iPod classic and the iPod Video.)
Problem Number 2: I cannot successfully sync my Music Library (40GB) with my iPod classic. I actually got to listen to a song after 4 days of trying to perform this download (only 800 MB of my music made it into the iPod successfully.) iTunes froze up when the iPod was first attached and also while trying to perform the sync. (I also have and iPod Video (30GB) and it works fine although a little slow.) The Genius at my Apple Store was able to load the iPod successfully using one of their BootCamp machines since my Music Library resides on an external hard disk. (And it only took 4 hours of work to get this far.)
Device Manager in Windows also shows an additional driver (iPod Driver) in the USB section with the iPod classic attached (it is not shown when using the iPod video). Both iPods show as Drive J: in the My Computer window.
Note to Apple Management: When a customer pays $250 to $350 for and iPod, the customer has heightened expectation levels, especially if he/she has had success with prior successful products. Especially since the classic is the 6th generation machine. Please get on this Apple!!!!!

I solved my problem!! I just loaded my iPod classic 160GB with 40GB of music and one video file.
I upgraded to iTune 7.5.0.20 and iPod Software 1.0.2 with no major ill effects. (I had to install iTunes 7.5 a second time because it told me to.) Windows XP is at SP 2 level and appears to be fine.
I tried using msconfig to stop initally loading anything except iTunesHelper and qttask. Nothing major broken yet. This is good news.
I tried loading over one album at a time (Using the Manual button in the options) and iTunes started freezing up at weird places (but it usually came back after a while.)
So I set the iPod into Disk Mode and I went to the Summary screen and only checked the "Enable Disk Use" box. (The top box was already checked.)
I Clicked on the Music tab and chose Sync Music and All songs and playlists (I would suggest you try something less to test this; my whole list took almost 12 hours to copy over. But I'm running with 1.1 USB ports). It ran very smoothly and iTunes only got fussy when I asked it to eject the iPod, but it eventually did it.
After it said I could disconnect, I got the iPod out of Disk Mode by using Menu/Center buttons and presto, it was up and working. All my playlist present and accounted for.
It'll take me a couple of days to find any problems (I have 31 days of music to listen to), but it's looking good.
Thank you to all who have listened to my problems and provided help!!
Apple has managed to keep this customer.

Can't restore iPod Classic - Error 1439

I tried plugging in my iPod one day to put new songs on my iPod, but it was freezing my computer and I had to restart my computer. When I restarted my computer, suddenly my iPod was reading 'Plug to computer to restore'. Which is strange itself, because my iPod was fine prior to me plugging it in to the computer. So that's what I did, but my iTunes was having trouble restoring my iPod, and it wouldn't work. So I decided to try it on my laptop (I have iTunes on it too), but now I'm getting the 'Cannot restore, error 1439'. I've tried unplugging and replugging. I've tried rebooting computer. I've tried it on different computers. I've tried changing the port. I've updated iTunes to iTunes 9. I've tried every resolution that iTunes gave in support. Nothing seems to work.
Does anyone have any idea what I can do to get it to restore? If not, anyone know another way I can restore my iPod without iTunes use?
PS. I have a Windows XP

Here's the Apple Support doc for that error:
http://support.apple.com/kb/ts1372
Which at a guess suggests it a communnication issue. I'm pretty sure there will be a new build of iTunes out on Monday which might help if the problems originate with the particular build of iTunes (although it works fine for me). It would be worth trying to check out your device on a friend's computer who is not having problems to try to exclude either the iPod, the cable, or the PC as the most likely source of trouble.
*iPod Diagnostics*
You might also want to run some diagnostics on the iPod just to make sure the problems don't originate there. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
tt2

Can't restore iPod classic 60GB video. Cannot Allocate Memory - Disk Utility

Sorry if this has been asked before but I've been searching the boards and am yet to find a result.
I have an old iPod classic 60GB (video) which has a dodgy HDD. It was clicking and in a constant sad face/charging loop. I've managed to get it display "Please restore iPod" message and it is now being recognised by my macbook. I've tried to restore it via iTunes but when I try that I get an error message tht says "The iPod could not be restores because it is busy".
I've tried toformat the iPod using Disk Utility too but i get an error:
Disk Erase failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
The oddest thing is that under disk utility my iPod drive is showing up as a 2TB drive:
All I'm realy trying to do is restore the iPod so I can try to recover some of the tracks using Disk Drill. Can anybody help?

See if you can find a window based PC and try to do a Restore there.

Can't register IPOD Classic

Everyone, this sounds really easy. I had a nano previously and it was easy. I just plug it in and the screen comes up and it charges and syncs. Well, I lost it and my wife got me an Ipod Classic. I'm doing the same thing, I plug it in, but no screen comes up. I put in a cd and ask the comp to import it using Itunes, to get my screen. It then shows my device.
Now I need to register it. When the register screen comes up in the itunes window, it's so big that I can only read the left half of the screen. You have the scroll lever on the side to go up and down but you don't have one going left and right. I also dragged the screen to the left, and put my cursor on the right edge of the itunes screen until it shows the left right arrow. It can move left, which shortens the page but it can't move any further to the right.
I've hit the enlarge window and nothing. I hit the views, and nothing. I can only read half of the page and can't register my IPOD.
Last thing, I don't see any special code for the IPOD classic, will I need one?

Hi, kiki-just sorted our problem.
Go into Control Panel, Display and settings and increase the size of the pixel settings -worked for me-regards,
John

Can't reduce iPod Classic's volume

I have just bought my first iPod (classic model, 80GB) and I'm experiencing a lot of problems for adjusting it's volume. The minimum default volume seems to be set at a really loud level, so I can't reduce it or silence it at any time, it only lets me increase it even more. Does anybody know how can I solve this before my head explodes?

I have a problem kind of like this. I am able to lower the volume but it seems that after a certain point the volume bar will keep going down but the volume levels off. I can never get it to go completely silent like my previous ipods. So when I'm at work or in the library, it can be loud than I'd like it to be and I can't get it to drop any more.
My only suggestion is to leave feedback and hope something happens http://www.apple.com/feedback/ipod.html or return it because it sounds like your click wheel may have been faulty.

Can't restart ipod classic.

When I plugged my iPod classic into my Mac this morning to update my newest songs, it said "Battery very low." I suppose that could be, but it would be unusual. I'm pretty religious about keeping my iPods charged.
It's been charging for a couple of hours now, but still won't restart. I can hear the drive spinning up and down ...the Apple logo flashing on for a few seconds, then goes away.
I've tried rebooting a couple of times, but I can't tell if it's actually rebooting, or just spinning off and on like it's been doing while it's charging.
I don't know what to try next.

Hi b.lindstrom,
If you are seeing the Red X on your iPod, then try putting your iPod into Disk Mode and then restore it within iTunes. If that does not work, then you will need to setup service on your iPod. The article below will have more information to help you out.
iPod Displays a Red "X" Icon
http://support.apple.com/en-us/HT203170
Regards,
-Norm G.

Can't Eject IPOD Classic 80gig

Similar Messages

Maybe you are looking for