Can't enable 64bit kernel mode on my MBP

I typed the command "system_profiler SPHardwareDataType | grep "Model Identifier" | cut -d: -f2" and it shown that my mbp is MacBookPro3,1 and then I typed "ioreg -l -p IODeviceTree | grep firmware-abi", the terminal said that is " | | "firmware-abi" = <"NO". and I checked the Extensions, there are also many NOs on that list, What is that problem? I know that EFI-64 could enable 64bit Snow Leopard but how come my mbp can't?
Please help me, thank you!

A 64-bit chip and 64-bit EFI do not guarantee running the 64-bit kernel. In fact very few Macs can run the kernel. My four month old Mac mini cannot boot into 64-bit. Apple to date has disabled the 64-bit kernel for all MacBooks and the Mac mini.
This is the rule
A 32-bit processor can only run 32-bit stuff.
A 64-bit processor can run 32-bit and 64-bit stuff.
(stuff can be system, kernel, applications, drivers, etc)
So you need a 64-bit processor to run 64-bit anything
On a 64-bit processor:
A 32-bit Kernel can run both 32 and 64 bit applications.
A 64-bit Kernel can run both 32 and 64 bit applications.
A 32-bit Kernel can load only 32-bit kexts (kernel extensions).
A 64-bit Kernel can load only 64-bit kexts (kernel extensions).
Marcus Winter
Here is the list.
Dah•veed

Similar Messages

  • Can't enable "Sudden Motion Sensor" in 13" MBP

    My brand new MacBook Pro's "Sudden Motion Sensor" won't seem to enable. I've done the Terminal commands listed on Apple's support page and I get a "1" instead of a "0" next to the results, implying that the system thinks it's turned on, yet under "System Profiler" it says "Disabled." Obviously, either Terminal or System Profiler is wrong, but I can't figure out which one.
    I'm not sure if this would influence it but, I do have a WD500GB Scorpio Blue drive inside and was/am suffering from the "Beach ball of death" issues associated with the 3rd party HDD's, so I downgraded from the 1.7 EFI Firmware to the 1.6 EFI. Anyone experienced this issue or have any recommendations?

    Hi, got the same problem on a 15" MBP running 10.6.1. Apple support referred me to these discussions for a solution.

  • Enabling the Debug Mode

    Hello!
    I can't enable the debug mode as descibed here http://help.sap.com/saphelp_nwce10/helpdata/en/45/e4fa02855c2e97e10000000a155369/frameset.htm.
    There isn't "Start Debug Session..." in the context menu.
    How can I enable the debug mode on the fly?
    Regards,
    Armin

    Your probably missing the oracle debug privileges then. I can never remember them off hand but its something like debug any procedure and connect any session that are needed

  • Windows XP mode Can't enable integration features

    I noticed there are so many threads on this and all the discussions confuse the hell out of me.
    Here's how it happened for me: I install Virtual PC, then install Windows XP mode. The VM boots up fine, everything is smooth, I can access my C drive from the VM and run an XP program as if it's operating from my host Win7 machine.
    But I have to change the network settings so my bandwidth monitor which doesn't work on Win7 will recognize my host machine's traffic and log it. That requires a restart of XP mode. I do that and that's how this error happens. Now I can't enable integration
    features no matter what I do.
    I've followed steps in other threads. I deleted the .vsv file, set it to auto shut down or turn off instead of hibernate. The "Enable Integration features" button is greyed out. That cryptography FIPS thing or whatever it is is ALREADY disabled,
    always has been. That didn't work for me.
    Can anybody help me fix this?

    Well, with all the minutia in your post it was difficult to decipher exactly what your were after.
    If you have a question you should provide the specifics for the question and leave out all the irrelevant minutia.  Details specific to the situation you want to resolve are what's important.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
    Hi I get "Can't enable Integration Features" error when starting XP mode, please help.
    That better?
    Either way, I fixed the problem by reinstalling XP Mode.

  • HT4046 why i can't enable the voiceOver function with my new labtop(window 7 64bits) with my ipod shuffle?

    why i can't enable the voiceOver function with my new labtop(window 7 64bits) with my ipod shuffle?

    even try to update the latest itunes but still can't fix it
    is it window's problem?
    it work fine in my orginal desktop with window XP
    PS: ipod shuffle 3rd

  • Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

    Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode
    Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

    You need to disable Safety Mode at the bottom of the YouTube page. More info here:
    https://support.google.com/youtube/answer/174084?hl=en

  • Error message on Satellite A200: Can't open ACPI ATK0100 Kernel Mode Driver

    Hi,
    I have Satellite A200 laptop
    When i start the windows(vista) I get the following error: *"Can't open ACPI ATK0100 Kernel Mode Driver.* " !!
    I've installed all drivers and the error remains.
    I've installed all the drivers from the Toshiba website , but the issue remains.
    Device manager shows me that every device is working properly.
    Has anyone got an solution?
    Thanks

    ACPI is the power management facility for your Windows Operating system. If this is failing you may have to run a system recovery on your computer. You can do this with the hidden partition on your hard drive, however this will erase all of the data on your machine. If this doesn't solve the problem, you may have to consider getting your hard drive checked for bad sectors as this may have failed.
    Hope this helps. :)

  • I can't enable VT-x in Thinkpad setup mode

    Tôi cài đặt VMware, nó có thể không hoạt động tôi không thể cho phép VT-x
    Khi tôi ở chế độ thiết lập thinkpad, tôi không thể thay đổi kích hoạt hoặc vô hiệu hóa VT-x
    nó ẩn, tôi không thể thay đổi nó Xin hãy giúp tôi !!

    Google translation of above post:
    I installed VMware, it can not work I can not enable VT-x
    When I set thinkpad mode, I can not change the enable or disable VT-x
    it hidden, I can not change it Please help me !!
    This is an English-language forum.  When posting in another language please provide a translation to English.
    Are you saying that the VT-x option is not available in BIOS?  Or it is available but you can't toggle it to "enabled"?  Or that you set it to enabled, but VMWare still reports it as disabled?
    What laptop modela and operating system are you using?
    If you are turning VT on in BIOS but still getting the VMWare error, things to check:
    after setting VT to ON, do a full power-off, power on reboot as stated in the VMWare message.
    Make sure you don't have Hyper-V enabled (in Windows features) as Hyper-V will hide the VT setting from other hypervisors.
    Some versions of Avast antivirus will also hide the VT setting from applications.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • UNABLE or CAN NOT Install Printer, Windows 8 calls it a Kernel Mode Driver

    Very similar to
    this thread.
    None of the provided solutions work.  I wish I could get a screenshot, but this is a computer I was working on for a friend and won't be back there for a couple of days.
    Things I have tried:
    Download absolute latest Windows 8 x64 Driver from HP's website for the specific printer in question (hp laserjet pro color m251nw).  Tried both "driver only" and "full installation" downloads.
    Told Windows to use a driver from Windows Update.
    There is no Citrix based application to uninstall anywhere on the computer.
    The computer is Windows 8 "standard" - so using GPEdit to Disable "Disallow installation of kernel-mode printer drivers" was not an option (although I did use a
    3rd party GPEditor to try to modify this setting anyway, to no avail).
    I used Advanced Startup to boot without Driver Signature Verification.
    Disabled Anti-Virus software to ensure it wasn't preventing installation.
    I ensured the local user on the computer had full permissions to the Devices and Printers menu.
    I tried to install everything using "Right Click / Run as Administrator"
    I tried to install using both Windows 7 and XP SP3 Compatibility Modes.
    I have ensured there are no files in the Print Spools folder (C:\Windows\System32\Spool\Printers\). and reset the print spooler.
    I am able to ping the network printer and it prints test pages, I do not believe there to be a problem with the printer itself, just some strange setting causing me all of these problems.
    HELP!  I'm an IT Pro but I spent 3 hours on this and I'm not used to being utterly defeated! 
    Thanks in advance for any and all advice!!!!
    Don't forget, if you find the help you need, click the "Propose as Answer" link at the bottom of the post containing the solution!
    NuAngel.net

    I wish I could get a screenshot
    What are the chances of it being a bogus message?  For that reason and others I would be running ProcMon to find, correlate and supplement any and all diagnostics which are being produced.  Filter with  Operation Is WriteFile.  You
    need to infer which WriteFile  corresponds with which message but that is relatively easy because the Detail contains a close approximation to each message's length.  In any case, you get to see all the files that were involved and easy access to
    them.
    Good luck
    Robert Aldwinckle

  • All keyboard shortcuts are disabled, and I can't enable them - resetting firefox or safe mode not helping

    For example, Ctrl-T is grayed out / disabled so I can't open a new tab using the keyboard.
    Ditto for ALL other keyboard shortcuts - they're all disabled / grayed out.
    PS - I've used Firefox for years, this happened about a month or so ago, and it's been that way ever since, even after rebooting computer.

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Running 8.0 firefox. can't enable 4.60 hp printing (windows 7 64bit)

     can't enable printer (work force 600)  incompatability issues.  Any fix?

    Hi,
    The HP Smart Web Printing compatible with Internet Explorer 6,7 and 8.
    The HP Smart Print compatible with internet Explorer 6,7,8 and 9.
    HP does not provide any web printing solution for firefox.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • All future MacBook with 10.7 Lion will be set to 64bit kernel by default always ?

    Dear Apple and Mac Expert,
    Actually I hope Apple can answer this if possible or someone can redirect me to any Apple post ?
    I learned that right from 10.7 Lion available, the default kernel mode is always set to 64bit no matter installed in MacBook White or Pro. I am wondering is it same for all future MacBook Air and Pro that come with 10.7 Lion will be set to 64bit kernel by default??
    I really need a confirmation on this to support my future plan.
    Appreciate Apple can answer this or someone can help.
    Thanks in advanced!

    Apple typically does not answer questions here. Further, your question invites speculation about future product releases, which is specifically forbidden in the Terms of Use for these forums.
    That having been said, Apple usually looks forward, not back. Once they remove something it is usually gone forever. Witness the floppy drive disappearing in the late 1990s.
    Best of luck.

  • Mavericks can only boot in safe mode

    In can only boot my Imac 27' (end of 2009) in safe mode.
    The problem started in Lion, when the computer suddenly froze.
    I upgraded (in safe mode) to Mavericks 10.9.2, took away all Launch Agents and Daemon that are not Apple (both in System and User's), done all the permission repairs, reset memory, fsck and turn the plug off the computer. The only thing I was not able to do is the hardware test (for some reason, the command + D to access the internet testing is not working). I have no external devices or cables attached.
    My 2TB hard drive is divided in 3 partitions. I have got 2 user accounts.
    Even with all this, I can only start in safe mode.
    Here is a copy of the log. If anyone can help, I would be grateful !
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.bookstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 kernel[0]: Longterm timer threshold: 1000 ms
    03.05.14 11:48:37.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    03.05.14 11:48:37.000 kernel[0]: vm_page_bootstrap: 2015569 free pages and 65199 wired pages
    03.05.14 11:48:37.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
    03.05.14 11:48:37.000 kernel[0]: zone leak detection enabled
    03.05.14 11:48:37.000 kernel[0]: "vm_compressor_mode" is 4
    03.05.14 11:48:37.000 kernel[0]: standard timeslicing quantum is 10000 us
    03.05.14 11:48:37.000 kernel[0]: standard background quantum is 2500 us
    03.05.14 11:48:37.000 kernel[0]: mig_table_max_displ = 74
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Sandbox
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Quarantine
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    03.05.14 11:48:37.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    03.05.14 11:48:37.000 kernel[0]: The Regents of the University of California. All rights reserved.
    03.05.14 11:48:37.000 kernel[0]: MAC Framework successfully initialized
    03.05.14 11:48:37.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    03.05.14 11:48:37.000 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    03.05.14 11:48:37.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    03.05.14 11:48:37.000 kernel[0]: ACPI: sleep states S3 S4 S5
    03.05.14 11:48:37.000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    03.05.14 11:48:37.000 kernel[0]: console relocated to 0xf80010000
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
    03.05.14 11:48:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
    03.05.14 11:48:37.000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    03.05.14 11:48:37.000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    03.05.14 11:48:37.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    03.05.14 11:48:37.000 kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
    03.05.14 11:48:37.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    03.05.14 11:48:37.000 kernel[0]: handoff: unsupported os...
    03.05.14 11:48:37.000 kernel[0]: handoff: symbol mismatch...
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    03.05.14 11:48:37.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
    03.05.14 11:48:37.000 kernel[0]: BSD root: disk0s2, major 1, minor 1
    03.05.14 11:48:37.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    03.05.14 11:48:37.000 kernel[0]: hfs: mounted Macintosh HD on device root_device
    03.05.14 11:48:37.000 kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
    03.05.14 11:48:37.000 kernel[0]: 2.296383: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
    03.05.14 11:48:37.000 kernel[0]: 2.300580: Atheros: mac 128.2 phy 13.0 radio 12.0
    03.05.14 11:48:37.000 kernel[0]: 2.300590: Use hw queue 0 for WME_AC_BE traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300596: Use hw queue 1 for WME_AC_BK traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300603: Use hw queue 2 for WME_AC_VI traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300609: Use hw queue 3 for WME_AC_VO traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300615: Use hw queue 8 for CAB traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300620: Use hw queue 9 for beacons
    03.05.14 11:48:37.000 kernel[0]: 2.300700: wlan_vap_create : enter. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1
    03.05.14 11:48:37.000 kernel[0]: 2.300743: wlan_vap_create : exit. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1.
    03.05.14 11:48:37.000 kernel[0]: 2.300778: ATH tunables:
    03.05.14 11:48:37.000 kernel[0]: 2.300782:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    03.05.14 11:48:37.000 kernel[0]: VM Swap Subsystem is ON
    03.05.14 11:48:37.000 kernel[0]: Waiting for DSMOS...
    03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe
    03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
    03.05.14 11:48:37.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
    03.05.14 11:48:10.829 com.apple.launchd[1]: *** launchd[1] has started up. ***
    03.05.14 11:48:10.830 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    03.05.14 11:48:37.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
    03.05.14 11:48:37.000 kernel[0]: init
    03.05.14 11:48:37.000 kernel[0]: probe
    03.05.14 11:48:37.000 kernel[0]: start
    03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
    03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    03.05.14 11:48:37.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: ** Device in slot: SLOT--1 **
    03.05.14 11:48:37.000 kernel[0]: Previous Shutdown Cause: 3
    03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    03.05.14 11:48:37.000 kernel[0]: DSMOS has arrived
    03.05.14 11:48:37.609 distnoted[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    03.05.14 11:48:36.114 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    03.05.14 11:48:36.115 fseventsd[46]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (502 27 1097)
    03.05.14 11:48:36.115 fseventsd[46]: log dir: /.fseventsd getting new uuid: 4CB3C308-0B39-4855-BD13-3F533C4457B9
    03.05.14 11:48:36.117 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    03.05.14 11:48:36.416 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    03.05.14 11:48:36.633 kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
    03.05.14 11:48:37.611 com.apple.launchd[1]: (com.apple.Kerberos.kdc[42]) Exited with code: 1
    03.05.14 11:48:37.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    03.05.14 11:48:37.000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    03.05.14 11:48:37.642 kdc[78]: label: default
    03.05.14 11:48:37.642 kdc[78]:     dbname: od:/Local/Default
    03.05.14 11:48:37.642 kdc[78]:     mkey_file: /var/db/krb5kdc/m-key
    03.05.14 11:48:37.642 kdc[78]:     acl_file: /var/db/krb5kdc/kadmind.acl
    03.05.14 11:48:38.242 com.apple.SecurityServer[24]: Session 100000 created
    03.05.14 11:48:38.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    03.05.14 11:48:38.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1a40 -- 0xe000 -- 0xb400 ****
    03.05.14 11:48:39.540 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:42.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    03.05.14 11:48:42.130 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:43.069 configd[56]: dhcp_arp_router: en1 SSID unavailable
    03.05.14 11:48:43.078 configd[56]: setting hostname to "Macs-iMac-3.local"
    03.05.14 11:48:43.092 configd[56]: network changed.
    03.05.14 11:48:43.095 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:43.095 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:43.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:48:43.492 mds[34]: (Normal) FMW: FMW 0 0
    03.05.14 11:48:44.000 kernel[0]: hfs: mounted Video on device disk0s4
    03.05.14 11:48:45.000 kernel[0]: hfs: mounted Musicas on device disk0s5
    03.05.14 11:48:46.690 com.apple.SecurityServer[24]: Entering service
    03.05.14 11:48:46.783 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    03.05.14 11:48:46.813 digest-service[67]: label: default
    03.05.14 11:48:46.813 digest-service[67]:     dbname: od:/Local/Default
    03.05.14 11:48:46.813 digest-service[67]:     mkey_file: /var/db/krb5kdc/m-key
    03.05.14 11:48:46.814 digest-service[67]:     acl_file: /var/db/krb5kdc/kadmind.acl
    03.05.14 11:48:46.816 digest-service[67]: digest-request: uid=0
    03.05.14 11:48:46.833 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    03.05.14 11:48:46.835 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    03.05.14 11:48:46.870 digest-service[67]: digest-request: netr probe 0
    03.05.14 11:48:46.871 digest-service[67]: digest-request: init request
    03.05.14 11:48:46.879 digest-service[67]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
    03.05.14 11:48:46.913 awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    03.05.14 11:48:46.919 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
    03.05.14 11:48:47.229 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    03.05.14 11:48:47.243 locationd[40]: Location icon should now be in state 'Inactive'
    03.05.14 11:48:47.243 locationd[40]: locationd was started after an unclean shutdown
    03.05.14 11:48:47.401 airportd[63]: airportdProcessDLILEvent: en1 attached (up)
    03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    03.05.14 11:48:47.404 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:47.404 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:47.000 kernel[0]: 38.870836: performCountryCodeOperation: Not connected, scan in progress[0]
    03.05.14 11:48:47.000 kernel[0]: 38.871785: setWOW_PARAMETERS:wowevents = 2(1)
    03.05.14 11:48:47.470 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    03.05.14 11:48:47.532 loginwindow[38]: Login Window Application Started
    03.05.14 11:48:47.000 kernel[0]: en1: 802.11d country code set to 'US '.
    03.05.14 11:48:47.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    03.05.14 11:48:47.589 sandboxd[113]: ([63]) airportd(63) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
    03.05.14 11:48:48.103 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:48.167 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:48.530 networkd[118]: networkd.118 built Aug 24 2013 22:08:46
    03.05.14 11:48:49.138 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:49.178 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.136 WindowServer[115]: Server is starting up
    03.05.14 11:48:50.229 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.262 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.542 systemkeychain[102]: done file: /var/run/systemkeychaincheck.done
    03.05.14 11:48:50.554 configd[56]: network changed: DNS*
    03.05.14 11:48:50.556 configd[56]: network changed: DNS*
    03.05.14 11:48:50.557 mDNSResponder[35]: D2D_IPC: Loaded
    03.05.14 11:48:50.557 mDNSResponder[35]: D2DInitialize succeeded
    03.05.14 11:48:50.561 mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    03.05.14 11:48:50.561 mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB802360 Macs-iMac-3.local. (Addr) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB8027F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81BD60 Macs-iMac-3.local. (AAAA) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81C1F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    03.05.14 11:48:51.199 kdc[78]: KDC started
    03.05.14 11:48:51.321 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:51.362 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:51.520 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    03.05.14 11:48:51.571 awacsd[59]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
    03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
    03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
    03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    03.05.14 11:48:52.603 fseventsd[46]: event logs in /Volumes/Video/.fseventsd out of sync with volume.  destroying old logs. (157 8 1095)
    03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchDevice::start] entered
    03.05.14 11:48:53.586 fseventsd[46]: log dir: /Volumes/Video/.fseventsd getting new uuid: DF46AA4B-9528-407F-AD85-EAC421E431C3
    03.05.14 11:48:54.638 awacsd[59]: KV HTTP 0
    03.05.14 11:48:54.655 fseventsd[46]: event logs in /Volumes/Musicas/.fseventsd out of sync with volume.  destroying old logs. (155 10 1095)
    03.05.14 11:48:55.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
    03.05.14 11:48:55.424 mds[34]: (Normal) Volume: volume:0x7f8813845200 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
    03.05.14 11:48:56.202 fseventsd[46]: log dir: /Volumes/Musicas/.fseventsd getting new uuid: DBDC9085-505D-4A24-8508-5C15EBF36DFA
    03.05.14 11:48:57.243 WindowServer[115]: Session 256 retained (2 references)
    03.05.14 11:48:57.243 WindowServer[115]: Session 256 released (1 references)
    03.05.14 11:48:57.280 WindowServer[115]: Session 256 retained (2 references)
    03.05.14 11:48:57.282 WindowServer[115]: init_page_flip: page flip mode is on
    03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    03.05.14 11:48:57.000 kernel[0]: AirPort: Link Up on en1
    03.05.14 11:48:57.000 kernel[0]: 48.780691: apple80211Request[10514] Unsupported ioctl 181
    03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    03.05.14 11:48:57.000 kernel[0]: AirPort: RSN handshake complete on en1
    03.05.14 11:48:57.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:48:57.927 fseventsd[46]: Logging disabled completely for device:1: /Volumes/Recovery HD
    03.05.14 11:48:57.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
    03.05.14 11:48:58.530 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
    03.05.14 11:48:58.533 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
    03.05.14 11:48:58.534 WindowServer[115]: mux_initialize: Couldn't find any matches
    03.05.14 11:48:58.535 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
    03.05.14 11:48:58.538 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
    03.05.14 11:48:59.640 awacsd[59]: KV HTTP 0
    03.05.14 11:49:00.487 configd[56]: network changed: DNS* Proxy
    03.05.14 11:49:00.487 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
    03.05.14 11:49:00.488 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    03.05.14 11:49:00.489 UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
    03.05.14 11:49:00.493 configd[56]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
    03.05.14 11:49:02.569 ntpd[135]: proto: precision = 1.000 usec
    03.05.14 11:49:02.673 racoon[157]: accepted connection on vpn control socket.
    03.05.14 11:49:02.811 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    03.05.14 11:49:03.100 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    03.05.14 11:49:04.537 apsd[61]: Unrecognized leaf certificate
    03.05.14 11:49:14.000 kernel[0]: utun_ctl_connect: creating interface utun0
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.378 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.378 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:49:20.396 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
    03.05.14 11:49:23.596 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
    03.05.14 11:50:16.742 warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
    03.05.14 11:50:16.743 warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
    03.05.14 11:50:51.617 apsd[61]: Failed to send activation record to service com.apple.ManagedClient.enroll
    03.05.14 11:51:07.187 distnoted[172]: # distnote server agent  absolute time: 177.064182367   civil time: Sat May  3 11:51:07 2014   pid: 172 uid: 502  root: no
    03.05.14 11:51:24.977 mdworker[177]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12997 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802
    03.05.14 11:51:25.032 com.apple.SecurityServer[24]: Session 100003 created
    03.05.14 11:51:25.033 com.apple.SecurityServer[24]: Session 100005 created
    03.05.14 11:51:38.595 mdworker[184]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12980 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802

    I have tried a few other tricks from the experts in the discussion boards (including removing all preference files that are non apple, remove all non apple extensions), still no way to start up the computer other than safe boot.
    I would like to try and turn off bonjour, as it seems like a MDNSResponder Error. But need a green light from any of you experts.
    I am posting the latest system log (on this one, I forgot to unplug the printer)
    Please help !!!
    May  4 20:38:05 localhost bootlog[0]: BOOT_TIME 1399246685 0
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.appstore" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
        Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.authd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.bookstore" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.eventmonitor" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.install" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.iokit.power" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.mail" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.MessageTracer" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.performance" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.securityd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:45 --- last message repeated 6 times ---
    May  4 20:38:44 localhost kernel[0]: Longterm timer threshold: 1000 ms
    May  4 20:38:44 localhost kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    May  4 20:38:44 localhost kernel[0]: vm_page_bootstrap: 2008481 free pages and 72287 wired pages
    May  4 20:38:44 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
    May  4 20:38:44 localhost kernel[0]: zone leak detection enabled
    May  4 20:38:44 localhost kernel[0]: "vm_compressor_mode" is 4
    May  4 20:38:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
    May  4 20:38:44 localhost kernel[0]: standard background quantum is 2500 us
    May  4 20:38:44 localhost kernel[0]: mig_table_max_displ = 74
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Sandbox
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Quarantine
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    May  4 20:38:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    May  4 20:38:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    May  4 20:38:44 localhost kernel[0]: MAC Framework successfully initialized
    May  4 20:38:44 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    May  4 20:38:44 localhost kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    May  4 20:38:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    May  4 20:38:44 localhost kernel[0]: ACPI: sleep states S3 S4 S5
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    May  4 20:38:44 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
    May  4 20:38:44 localhost kernel[0]: console relocated to 0xf80010000
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
    May  4 20:38:44 localhost kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    May  4 20:38:44 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    May  4 20:38:44 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    May  4 20:38:44 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
    May  4 20:38:44 localhost kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
    May  4 20:38:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    May  4 20:38:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
    May  4 20:38:44 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
    May  4 20:38:44 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    May  4 20:38:44 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
    May  4 20:38:44 localhost kernel[0]: USBF:    1.518    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
    May  4 20:38:44 localhost kernel[0]: 2.257313: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
    May  4 20:38:44 localhost kernel[0]: 2.261494: Atheros: mac 128.2 phy 13.0 radio 12.0
    May  4 20:38:44 localhost kernel[0]: 2.261504: Use hw queue 0 for WME_AC_BE traffic
    May  4 20:38:44 localhost kernel[0]: 2.261510: Use hw queue 1 for WME_AC_BK traffic
    May  4 20:38:44 localhost kernel[0]: 2.261516: Use hw queue 2 for WME_AC_VI traffic
    May  4 20:38:44 localhost kernel[0]: 2.261522: Use hw queue 3 for WME_AC_VO traffic
    May  4 20:38:44 localhost kernel[0]: 2.261529: Use hw queue 8 for CAB traffic
    May  4 20:38:44 localhost kernel[0]: 2.261534: Use hw queue 9 for beacons
    May  4 20:38:44 localhost kernel[0]: 2.261612: wlan_vap_create : enter. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1
    May  4 20:38:44 localhost kernel[0]: 2.261651: wlan_vap_create : exit. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1.
    May  4 20:38:44 localhost kernel[0]: 2.261688: ATH tunables:
    May  4 20:38:44 localhost kernel[0]: 2.261691:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    May  4 20:38:44 localhost kernel[0]: USBF:    4.521    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: USBF:    5.362    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    8.760    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: USBF:    9.587    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    10.418    The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    10.418    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1596; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45036
    May  4 20:38:44 localhost kernel[0]: VM Swap Subsystem is ON
    May  4 20:38:06 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    May  4 20:38:06 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    May  4 20:38:32 localhost hidd[44]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    May  4 20:38:36 localhost hidd[44]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May  4 20:38:44 localhost com.apple.SecurityServer[25]: Session 100000 created
    May  4 20:38:45 localhost distnoted[65]: # distnote server daemon  absolute time: 28.917725827   civil time: Sun May  4 20:38:33 2014   pid: 65 uid: 0  root: yes
    May  4 20:38:46 localhost revisiond[27]: sandbox cache error 3850
    May  4 20:38:46 localhost blued[57]: sandbox cache error 11: database disk image is malformed
    May  4 20:38:46 localhost ReportCrash[71]: Invoking spindump for pid=13 wakeups_rate=1596 duration=29 because of excessive wakeups
    May  4 20:38:47 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    May  4 20:38:47 localhost kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    May  4 20:38:47 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:47 localhost spindump[73]: Unable to register Stop Spinning port: 1011
    May  4 20:38:47 localhost kernel[0]: Waiting for DSMOS...
    May  4 20:38:48 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:48 localhost kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
    May  4 20:38:48 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[42]): Exited with code: 1
    May  4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe
    May  4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
    May  4 20:38:49 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: init
    May  4 20:38:49 localhost kernel[0]: probe
    May  4 20:38:49 localhost kernel[0]: start
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xec00
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
    May  4 20:38:49 localhost kernel[0]: ** Device in slot: SLOT--1 **
    May  4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    May  4 20:38:49 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: Previous Shutdown Cause: 3
    May  4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    May  4 20:38:49 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1240 -- 0x7800 -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: DSMOS has arrived
    May  4 20:38:50 localhost com.apple.SecurityServer[25]: Entering service
    May  4 20:38:51 localhost kdc[79]: label: default
    May  4 20:38:51 localhost kdc[79]:     dbname: od:/Local/Default
    May  4 20:38:51 localhost kdc[79]:     mkey_file: /var/db/krb5kdc/m-key
    May  4 20:38:51 localhost kdc[79]:     acl_file: /var/db/krb5kdc/kadmind.acl
    May  4 20:38:52 localhost digest-service[66]: label: default
    May  4 20:38:52 localhost digest-service[66]:     dbname: od:/Local/Default
    May  4 20:38:52 localhost digest-service[66]:     mkey_file: /var/db/krb5kdc/m-key
    May  4 20:38:52 localhost digest-service[66]:     acl_file: /var/db/krb5kdc/kadmind.acl
    May  4 20:38:52 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    May  4 20:38:52 localhost configd[55]: dhcp_arp_router: en1 SSID unavailable
    May  4 20:38:52 localhost configd[55]: network changed.
    May  4 20:38:53 Macs-iMac-3.local configd[55]: setting hostname to "Macs-iMac-3.local"
    May  4 20:38:53 Macs-iMac-3.local digest-service[66]: digest-request: uid=0
    May  4 20:38:53 Macs-iMac-3.local com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    May  4 20:38:53 Macs-iMac-3.local mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    May  4 20:38:55 Macs-iMac-3 kernel[0]: hfs: mounted Video on device disk0s4
    May  4 20:38:56 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:56 Macs-iMac-3.local aosnotifyd[61]: aosnotifyd has been launched
    May  4 20:38:57 Macs-iMac-3.local systemkeychain[94]: done file: /var/run/systemkeychaincheck.done
    May  4 20:38:57 Macs-iMac-3 kernel[0]: hfs: mounted Musicas on device disk0s5
    May  4 20:38:58 Macs-iMac-3.local configd[55]: network changed: DNS*
    May  4 20:38:58 --- last message repeated 1 time ---
    May  4 20:38:58 Macs-iMac-3.local stackshot[21]: Timed out waiting for IOKit to finish matching.
    May  4 20:38:58 Macs-iMac-3.local awacsd[58]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    May  4 20:38:59 Macs-iMac-3.local airportd[62]: airportdProcessDLILEvent: en1 attached (up)
    May  4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    May  4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    May  4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: netr probe 0
    May  4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: init request
    May  4 20:39:00 Macs-iMac-3.local digest-service[66]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
    May  4 20:39:00 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    May  4 20:39:01 Macs-iMac-3.local loginwindow[38]: Login Window Application Started
    May  4 20:39:01 Macs-iMac-3.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2D_IPC: Loaded
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2DInitialize succeeded
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
    May  4 20:39:02 Macs-iMac-3.local kdc[79]: KDC started
    May  4 20:39:02 Macs-iMac-3.local awacsd[58]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
    May  4 20:39:03 Macs-iMac-3.local networkd[124]: networkd.124 built Aug 24 2013 22:08:46
    May  4 20:39:03 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:06 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:39:08 Macs-iMac-3.local mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    May  4 20:39:09 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:09 Macs-iMac-3.local spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:39:10 Macs-iMac-3.local sandboxd[116] ([62]): airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
    May  4 20:39:11 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:39:11 Macs-iMac-3.local blued[57]: hostControllerOnline - Number of Paired devices = 5, List of Paired devices = (
            "00-22-41-ce-73-b2",
            "7c-d1-c3-bc-ed-9b",
            "04-f1-3e-e9-76-f5",
            "d4-88-90-f0-2d-96",
            "90-27-e4-f2-fd-53"
    May  4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 04-f1-3e-e9-76-f5
    May  4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 04-f1-3e-e9-76-f5
    May  4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 7c-d1-c3-bc-ed-9b
    May  4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 7c-d1-c3-bc-ed-9b
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchDevice::start] entered
    May  4 20:39:14 Macs-iMac-3.local blued[57]: [setFeatureWithReportID] Could not set report
    May  4 20:39:19 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:21 Macs-iMac-3 kernel[0]: 76.792776: setWOW_PARAMETERS:wowevents = 2(1)
    May  4 20:39:21 Macs-iMac-3.local WindowServer[118]: Server is starting up
    May  4 20:39:22 Macs-iMac-3 kernel[0]: 77.481213: performCountryCodeOperation: Not connected, scan in progress[0]
    May  4 20:39:22 Macs-iMac-3.local locationd[40]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
    May  4 20:39:22 Macs-iMac-3.local locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    May  4 20:39:22 Macs-iMac-3 kernel[0]: en1: 802.11d country code set to 'US '.
    May  4 20:39:22 Macs-iMac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    May  4 20:39:22 Macs-iMac-3.local mds[34]: (Normal) FMW: FMW 0 0
    May  4 20:39:23 Macs-iMac-3.local locationd[40]: Location icon should now be in state 'Inactive'
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01AD60 Macs-iMac-3.local. (Addr) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01B1F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801B60 Macs-iMac-3.local. (AAAA) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801FF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    May  4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    May  4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: Link Up on en1
    May  4 20:39:27 Macs-iMac-3 kernel[0]: 83.354881: apple80211Request[10514] Unsupported ioctl 181
    May  4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    May  4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: RSN handshake complete on en1
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 released (1 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: init_page_flip: page flip mode is on
    May  4 20:39:28 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: mux_initialize: Couldn't find any matches
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
    May  4 20:39:30 Macs-iMac-3.local configd[55]: network changed: DNS* Proxy
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
    May  4 20:39:30 Macs-iMac-3.local configd[55]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
    May  4 20:39:31 Macs-iMac-3.local racoon[146]: accepted connection on vpn control socket.
    May  4 20:39:32 Macs-iMac-3.local ntpd[132]: proto: precision = 1.000 usec
    May  4 20:39:32 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    May  4 20:39:33 Macs-iMac-3.local apsd[60]: Unrecognized leaf certificate
    May  4 20:39:35 Macs-iMac-3.local mds_stores[129]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexCI in void _indexEmergencyUnmap(void *):live.1. marking invalid
    May  4 20:39:43 --- last message repeated 1 time ---
    May  4 20:39:43 Macs-iMac-3 kernel[0]: utun_ctl_connect: creating interface utun0
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:40:25 Macs-iMac-3.local warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
    May  4 20:40:25 Macs-iMac-3.local warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
    May  4 20:40:31 Macs-iMac-3 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
    May  4 20:40:42 Macs-iMac-3.local com.apple.kextcache[154]: kext com.jmicron.JMicronATA  101069000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASRAID  307029000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA3  100059000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA  200009000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressPCIUl4  404029000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOCelerityFC  304089000 is in exception list, allowing to load
    May  4 20:40:55 Macs-iMac-3.local com.apple.kextcache[154]: kext com.Accusys.driver.Acxxx  300029000 is in exception list, allowing to load
    May  4 20:41:16 Macs-iMac-3.local com.apple.kextcache[154]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
    May  4 20:42:17 Macs-iMac-3.local distnoted[161]: # distnote server agent  absolute time: 252.755084619   civil time: Sun May  4 20:42:17 2014   pid: 161 uid: 502  root: no
    May  4 20:42:18 Macs-iMac-3.local mdworker[157]: sandbox cache error 3850
    May  4 20:42:37 Macs-iMac-3.local distnoted[169]: # distnote server agent  absolute time: 272.385323107   civil time: Sun May  4 20:42:37 2014   pid: 169 uid: 89  root: no
    May  4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100005 created
    May  4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100004 created
    May  4 20:42:50 Macs-iMac-3.local mds[34]: (Normal) Volume: volume:0x7faf09848800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.vXiC4Y
    May  4 20:45:38 localhost bootlog[0]: BOOT_TIME 1399247138 0

  • "Unexpected Kernel Mode Trap (Wdf01000.sys)" and a Blue Screen appearing frequently on my Windows 8.1 (64-bit) laptop and laptop restarting all of a sudden.

    Hi I am Arka Dey. I am using a
    Windows 8.1 64-bit single language Dell laptop. Recently I have installed an update to my Windows 8.1 (X-64) operating system from the "Windows Update" available in the "Control Panel" section of my laptop.
    But from that very day when I installed the updates, my laptop started behaving weird sometimes.
    The problem is while I am using my laptop, a
    blue screen suddenly appears and it says, " Your PC has run into a problem and needs to be restarted." Along with it there is
    written the following message: " You can later search for this online - Unexpected Kernel Mode Trap (Wdf01000.sys)".
    After displaying this for a few seconds in the blue screen mode, my
    laptop automatically restarts. This has been happening for sometime for the past few weeks. I do not understand the meaning of the message displayed in the blue screen and nor do I know the reason behind its occurrence. Please help me with
    a solution to this irritating problem as I am not a student of computer related sciences and software technologies. Neither am I that tech savvy. So please do help me with a guide or set of instructions to solve this problem of mine. The detailed specifications
    of my laptop are given as follows:-
    System Information
    OS Name Microsoft Windows 8.1 Single Language
    Version 6.3.9600 Build 9600
    Other OS Description Not Available
    OS Manufacturer Microsoft Corporation
    System Name DELL
    System Manufacturer Dell Inc.
    System Model Inspiron 5521
    System Type x64-based PC
    System SKU Inspiron 5521
    Processor Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date Dell Inc. A11, 29-08-2013
    SMBIOS Version 2.7
    Embedded Controller Version 1.01
    BIOS Mode UEFI
    BaseBoard Manufacturer Dell Inc.
    BaseBoard Model Not Available
    BaseBoard Name Base Board
    Platform Role Mobile
    Secure Boot State On
    PCR7 Configuration Binding Not Possible
    Windows Directory C:\WINDOWS
    System Directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume1
    Locale India
    Hardware Abstraction Layer Version = "6.3.9600.17031"
    User Name DELL\Arka Dey
    Time Zone India Standard Time
    Installed Physical Memory (RAM) 8.00 GB
    Total Physical Memory 7.88 GB
    Available Physical Memory 5.08 GB
    Total Virtual Memory 15.9 GB
    Available Virtual Memory 12.6 GB
    Page File Space 8.00 GB
    Page File C:\pagefile.sys
    Hyper-V - VM Monitor Mode Extensions Yes
    Hyper-V - Second Level Address Translation Extensions
    Yes
    Hyper-V - Virtualization Enabled in Firmware
    Yes
    Hyper-V - Data Execution Protection Yes
    N.B. : If you need more specifications about hardwares then I can send them to you in later messages. Please help me.

    Hi roberto-
    Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
    -sag

  • How can I enable remote debug in weblogic to use with Rational RSA IDE?

    How can I enable the remote debugging technique so that I can work with my IDE.
    I use RSA by IBM as the IDE
    What should be the changes in the setdomainenv or startweblogic?
    I use 10.3
    Please help.. ur help is appreciable...

    Hi,
    I did not make any console adjustments for debugging on my WebLogic 10.3.2.0 - however I am running in development mode on an "adminServer" (an option during the install)
    In the console there is a debug setup page - that seems to have no effect for me (I can always debug) - so either it is a combination of development mode and/or the startWeblogic script from the Eclipse plugin.
    However, these debug settings are likely for debugging into the server - you only want to debug your own app code right?
    On the console page goto
    http://localhost:7001/console/console.portal?_nfpb=true&_pageLabel=ServerDebugPage
    servers | AdminServer | configuration-debug | expand weblogic
    I see...
    "Use this page to define debug settings for this server.
    Debug settings for this Server
    EnableDisableClear Showing 1 to 2 of 2 Previous Next
    Debug Scopes and Attributes State
    default Disabled
    weblogic Disabled
    EnableDisableClear Showing 1 to 2 of 2 Previous Next
    Try expanding the whole tree and selecting the root to enable everything.
    You will see the following
    10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute DebugAbbreviation on weblogic.management.configuration.ServerDebugMBeanImpl@47a32e1b([base_domain]/Servers[AdminServer]/ServerDebug[AdminServer]) has been changed. This may require redeploying or rebooting configured entities>
    <10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server AdminServer. This server must be rebooted in order to consume this change.>
    <10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerDebugPage.>
    When I debug WebLogic 10.3.2.0 from Eclipse 3.5 EE - I see the following in my server startup log which includes the "-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453" you mentioned.
    Starting WLS with line:
    c:\opt\wls10320\JROCKI~1.5-3\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\opt\wls10320\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=C:\opt\wls10320\WLSERV~1.3 -Dwls.home=C:\opt\wls10320\WLSERV~1.3\server -Dweblogic.home=C:\opt\wls10320\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=c:\opt\wls10320\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
    Listening for transport dt_socket at address: 8453
    The server process listening on debug portl 8453 ooks like this
    Oracle WebLogic Server 11gR1 PatchSet 1 at localhost [Oracle WebLogic Launch Configuration]     
         BEA JRockit(R)[localhost:8453]     
              Thread [Main Thread] (Running)     
              Daemon Thread [Timer-0] (Running)     
              Daemon Thread [Timer-1] (Running)     
              Daemon Thread [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] (Running)     
              Daemon Thread [weblogic.time.TimeEventGenerator] (Running)     
              Daemon Thread [JMAPI event thread] (Running)     
              Daemon Thread [weblogic.timers.TimerThread] (Running)     
              Daemon Thread [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] (Running)     
              Daemon Thread [Thread-7] (Running)     
              Daemon Thread [ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'] (Running)     
              Daemon Thread [ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'] (Running)     
    I hit a breakpoint and see
    Daemon Thread [[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] (Suspended (breakpoint at line 56 in ApplicationService))     
         ApplicationService_5ptwty_Impl(ApplicationService).insertObjects(List<Cell>) line: 56     
         NativeMethodAccessorImpl.invoke0(Method, Object, Object[]) line: not available [native method]     
         NativeMethodAccessorImpl.invoke(Object, Object[]) line: 39     
         DelegatingMethodAccessorImpl.invoke(Object, Object[]) line: 25     
         Method.invoke(Object, Object...) line: 597     
         AopUtils.invokeJoinpointUsingReflection(Object, Method, Object[]) line: 310     
         ReflectiveMethodInvocation.invokeJoinpoint() line: 182     
         ReflectiveMethodInvocation.proceed() line: 149     
         DelegatingIntroductionInterceptor.doProceed(MethodInvocation) line: 131     
         DelegatingIntroductionInterceptor.invoke(MethodInvocation) line: 119     
         ReflectiveMethodInvocation.proceed() line: 171     
         MethodInvocationVisitorImpl.visit() line: 37     
         EnvironmentInterceptorCallbackImpl.callback(MethodInvocationVisitor) line: 55     
         EnvironmentInterceptor.invoke(MethodInvocation) line: 50     
         ReflectiveMethodInvocation.proceed() line: 171     
         ExposeInvocationInterceptor.invoke(MethodInvocation) line: 89     
         ReflectiveMethodInvocation.proceed() line: 171     
         DelegatingIntroductionInterceptor.doProceed(MethodInvocation) line: 131     
         DelegatingIntroductionInterceptor.invoke(MethodInvocation) line: 119     
         ReflectiveMethodInvocation.proceed() line: 171     
         JdkDynamicAopProxy.invoke(Object, Method, Object[]) line: 204     
         $Proxy68.insertObjects(List) line: not available     
         ApplicationService_5ptwty_ApplicationServiceLocalImpl.insertObjects(List<Cell>) line: 306     
         FrontController.generateGlider(PrintWriter) line: 240     
    thank you
    /michael
    http://www.eclipselink.org

Maybe you are looking for

  • Problem with hp photosmart c5180 and printing from computer

    Hello, I have windows 7 and an hp photosmart c5180 all in one printer, at first, I couldnt scan anything to my computer, so I reinstalled the software and drivers for windows 7, and it scans now, but the printer doesnt respond to the computers comman

  • How to connect Template project and Implementation project

    Hi Experts,      I would like to know how to connect Template project and Implementation project     in Solution maneger.   Please help. Best regards,    Gaito

  • HDMI & Pavillion 500-242ea

    I have just bought a pavillion 500-242ea with an amd radeon hd7560d graphics . There is an hdmi port which I have connected to my tv but the tv says there is no signal. I have no trouble connecting a differnt desktop and my laptop to the tv. Could an

  • Connecting to an oracle database

    Hi! I am a student of Computer Engineering. I was hoping someone could help me out giving me options of could be wrong in my database application. The problem is this: I connect to an oracle database and i have a username, password and an url directi

  • Logon is not possible because you have not been assigned to a business role

    I am getting the message u201CLogon is not possible because you have not been assigned to a business role; contact your system administratoru201D when I try to access an incident ticket SMIN I created in SolMan 7.1. I have seen this exact error in lo