Can't enable bluetooth second time after 3.0 upgrade

Since the iPhone 3.0 upgrade, I can only enable bluetooth once. If I turn bluetooth off, then attempt to turn it on again, it appears to crash and I am not able to turn on bluetooth. The only way I can enable bluetooth is to turn the phone off, then back on.

I'm not sure what you mean by turning "automatically join networks" on.
Under Settings->Wi-Fi, I have turned on "Ask to Join Networks," which is what I think you mean -- it says, "Known networks will be joined automatically. If no known networks are available, you will be asked before joining a new network." But even if I turn that toggle off, it still says, "Known networks will be joined automatically. If no known networks are available, you will have to manually select a network."
The behavior I had in the past was that my iPod would reconnect to my office network when I woke it from sleep, so I feel confident it's always automatically connected in the past, and is set as it should be to do so in the future. (Even while asleep, it would occasionally alert me to new e-mail. Since it loses its connection now, it doesn't do so.) Either way, I'm confused about why attempting to manually rejoin a known network would even occasionally get me an "Unable to join network" message, when tapping "Other ..." and re-entering that same network's settings would be successful. Seems it is able to join that network, but won't do it automatically -- and occasionally won't do it unless I teach it about that network all over again.
But there's also that "Auto-Join" toggle I've mentioned above, on the Wi-Fi Network settings page for this particular network. No matter how I try to turn that toggle on, it reverts off as soon I scroll down the page or tap the button in the top bar to return to the Wi-Fi Networks screen.
For what it's worth, it remembers my home Wi-Fi network just fine, and connects automatically when reentering range of my router. It also reconnects when waking from sleep, and periodically while asleep as well.

Similar Messages

  • Failure to down load CC Acrobat DC Pro for a second time after a system recovery

    Failure to down load CC Acrobat DC Pro for a second time after having to perform a system recovery.
    The previous 'DC Pro' is not showing as not being an installed program.
    When trying to perform the update again an error shows in the Creative Cloud window 'the download appears corrupt please try again in a few minutes(26).
    Trying again both in a few minutes and after a restart the same error message shows again.
    What next?

    check the dl'd file size vs expected file size to see if you're getting a completed download.
    also, you can try a different browser and/or different wired connection and/or a download manager.

  • I can not enable bluetooth on Iphone 4

    I can not enable bluetooth on Iphone 4. Attempt enabled in settings, bluetooth and awaits income. (not displayed tab)

    qfyerko wrote:
    Attempt enabled in settings, bluetooth and awaits income.
    Then pay it.
    What is the real issue?  Post in your native language if you have problems communicating in English.

  • I recently upgraded from Leopard to Snow Leopard and I noticed that I have more capacity available on the Macintosh HD. I checked my files and applications and they are still on my computer. Can capacity on the HD change after an OS upgrade?

    I recently upgraded from Leopard to Snow Leopard on my MacBook and I noticed that I have more capacity on the Macintosh HD than before the upgrade. I checked my files and applications and they are still on my computer and nothing appears to be missing. Before the upgrade I had around 111 GB capacity with around 10.50 GB available on the Mac HD but now after the upgrade I have 119 GB capacity and 20.92 GB available. Can capacity on the HD change after an OS upgrade?

    No, but the upgrade removed unneeded PowerPC code and changed the way free space is determined.
    (72071)

  • Can I remove safely Photoshop CS5 after a successful upgrade to Photoshop CS6?

    Can I remove safely Photoshop CS5 after a successful upgrade to Photoshop CS6? What is best and safest way to do this?

    If you are using a Windows OS
    Open CS5 and go Help > Deactivate.
    Then Control Panel > Programs and features > select CS5 and uninstall.
    Or just leave it there.  Make sure you have sorted any third party plugins from CS5, although the uninstall should leave them intact.

  • Thunderbird 31.0 can only be started one time after boot.

    After installing TBird 31.0 on Win7x64, the application can only be started 1 time. It does not matter if safe mode is used on the second restart; it always crashes. If TBird is closed or crashes, the OS must be rebooted. All OS patches are installed. Problem appeared with version 31.
    When TBird is shut down normally, the process never completely disappears from Task Manager.

    Hello Greg,
    unfortunately you're posting in the wrong forum.
    These forums are for Sun Hardware, you have a configuration problem with a piece of software - the x-server. Please post in one of these forums
    Solaris on x86
    http://forum.sun.com/jive/forum.jspa?forumID=291
    Installation
    http://forum.sun.com/jive/forum.jspa?forumID=292
    General Solaris 10 Discussion
    http://forum.sun.com/jive/forum.jspa?forumID=298
    Michael

  • Can i enable BlueTooth and keep my headphone output?

    well, the header says it all...
    Bouke

    No, the header really doesn't say it all. Enabling Bluetooth doesn't do anything except turn on the Bluetooth transceiver in the iPad. You could leave it on all the time if you wanted. You might see a slight increase in battery use but nothing else. You could still plug wired headphones in and use them. So, i'm guessing your question is more about pairing and connecting something to the iPad. One od the few things you can pair and connect to an iPad by Bluetooth is a keyboard. And yes, you can pair and connect a Bluetooth keyboard to an iPad and still use wired headphones.
    Best of luck.

  • Caller ID fails to identify numbers in my contacts 80-90% of the time after OS 6 upgrade

    Ever since I upgraded to OS 6, my Bold 9650 has exhibited several issues, one of which is my Caller ID-capable phone no longer identifies calls that come in from phone numbers I have in my Contacts.  This is not consistent, but it fails the vast majority of the time.  This feature worked flawlessly prior to the OS 6 upgrade.  The one exception to this failure is for those contacts that are also identified as Facebook friends: those contacts will have their Facebook profile pic displayed the majority of the time, but probably about 20% of the time that too will fail to display properly.   The phone number always displays, so it's not that folks have suddenly blocked their phone numbers.  It's also not due to the calling area, as previous to this OS 6 upgrade I didn't experience this issue.   
    Has anyone else experienced this? And if so, does anyone know of a resolution to this issue?
    Thanks.

    Suzy -
    I uninstalled FB, got by the cold sweats from the withdrawal, and of course had no incoming calls for 2 days.  Played around with calling my own cell from my work and home phones with mixed results - my work phone was correctly identified by my Contacts name associated, but my home phone just showed as the number.  I was a bit dubious of the FB uninstall truly clearing out remenants of the app, too, as the logo still appears on the home screen, and I believe the FB profile pics remained on some contacts.  If you click on the logo, it prompts you to install FB, but still...
    This morning I was prompted to download an update for OS 6, so I'm in the process of that now.  With all the problems I'm experiencing with the move from OS 5 to OS 6, I figured it can't get much worse (can it???). 
    I'll report back on my findings.
    Other issues I noticed from the OS 5 to 6 jump:
    - Blackberry Messenger no longer scans QR codes (just beeps 3 times after a brief period of showing the code on the screen - no attempt to focus on the code).  Installed an independent QR scanner app, but it won't read a code, either.
    - Verizon icon that used to show your running total of data usage no longer shows the data usage number.  I would go into the app, exit, and a number would be on it.  Later in the day, look at that icon again, and the number was gone once again.  It used to show all the time and automatically update the total throughout the day.
    - Phone antenna fails to turn on sometimes when the phone turns on for the day via the auto on feature. 
    Hoping this update may address some, if not all, of these items.

  • Can't enable Bluetooth after 2.1 upgrade

    Upgraded (original iPhone) to 2.1. After reboot Bluetooth will not turn on. It just spins forever in the pref pane.

    After the 2.1 upgrade my iPhone would not recognize my Jawbone. Per this discussion, I restored the iPhone in iTunes 8. Pairing is back! Both the Jawbone and TomTom were immediately there.
    Thanks!

  • How can I download second time after install

    I installed Lion (not doing the dvd copy) and all works fine.  How do I download again to make the dvd copy ?
    I want to install it on a macbook that is on a non-cable connected link (very slow connection).
    I can see it int eh Puchased list - Installed.  Do I have to buy it again ?

    Found it, the cmd (alt) key on the purchased icon....

  • TS4002 I can't enable mail on icloud after i updated to mountain lion 10.8

    I just updated to Mountain lion 10.8, and I cannot get mail to enable on icloud. I also see a faint apple on the corner of my mail tab on my dock, what is goin on? need help!

    the same happen to me. after updating from snow leopard to moutain lion I have decided to create email on icloud.com.
    i have setted it up on ios devices with success but on my mountain lion mac i can activate icloud with contacts , calendar, browser, data, but not the mail service.

  • How to save password and username second time after pressing by mistake "never for this site" option when firefox asked to remember passwords for gmail for first time?

    By mistake i pressed "Never for this site" when firefox first offered to remember my login details first time on gmail.com. Now how can i save my username and password for gmail.com. firefox no longer asks me to save any new login details... How can i re enable that notification to save passwords.

    * Make sure that you not run Firefox in [[Private Browsing]] mode. In Private Browsing mode some menu items are disabled (grayed) and features like visited links and disabled and not available.
    * You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History settings, choose: Tools > Options > Privacy, choose the setting '''Firefox will: Use custom settings for history'''
    * Uncheck: [[ ] "Automatically start Firefox in a private browsing session"
    See also [[Private Browsing|#Always_start_Firefox_in_a_private_browsing_session|Always start Firefox in a private browsing session]]

  • How can I enable bluetooth printing on HP BT printer card?

    I have an HP Deskjet 460 and wanted to use the HP Bluetooth Printer Card with it. So I set it up per instructions (I think) but I haven't figured out how to make it discoverable to my USB bluetooth dongle.  
    I've tried the dongle in both my laptop and desktop and in both instances the computers recognized the 'bluetooth radio device' and verified it is working okay, but in neither case can the computer 'discover' the bluetooth-enabled printer so they can connect.
    I was hoping to find better instructions from HP but was unable to so I'm trying this forum instead.
    Thank you.

    Hi Pete4750,
    There are only two possible solutions, that I can think of:
    1) Find an older computer with Windows XP on it so that you can install software and use the Printer Toolbox to enable the bluetooth.
    2) You can try installing the Windows XP software that includes the Printer Toolbox on Windows 7 using compatibility mode. Make older programs run in this version of Windows.
    Otherwise, if these solutions do not resolve your issue, please call our phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Best of luck!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Re: NB100-12A - How can I enable Bluetooth?

    I have just bought a NB100-12A.
    On installation and every few hours since it starts a process "Installing Bluetooth driver " which opens a dialog box which says "please plug in the bluetooth device and click the OK button" if I click OK the message appears again in a minute. If I click cancel the installation program ends abnormally and then restarts a few hours later.
    I can't tell if the NB100-12A has bluetooth built-in (although the packaging says it does) and if so how to enable it. Is it a software error, or could it be that the bluetooth device is faulty. Is there any way to test the bluetooth function?
    In Control Panel the Bluetooth Local COM has no entries in it. Does this mean it simply has not installed?

    Are you using the Toshiba Bluetooth Stack? Or the Microsoft Bluetooth Stack?
    I would try this:
    Uninstall the Toshiba Bluetooth Stack from Add/Remove Programs.
    Install the Toshiba Bluetooth Monitor (This will enable the Microsoft Stack). A Bluetooth icon should appear in the System Tray or Control Panel.

  • HT4623 its happinig second time after update my (ios) i tunes not reconized my phone and i have to setup again and again im tired of it .... im using iphone5

    hello im from istanbul turkey
    i have iphone5 and after get ios7 two times itunes(newest itunes) do not recognized my phone every time i have to get upgrade again  coluld you help me before throw it to window ?

    You will need to restore the software via the following procedure:
    Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.

Maybe you are looking for

  • K3b, filesystems and a dvd player

    Hi! Im using k3b to burn a dvd with 6 movies... just one have less than 31 characters, and the subtitles .srt for it works ok but the other 5 have more than 31 characters, and my dvd player do not "join" the video file with the .srt file... so, I hav

  • F110- Foreign invoice paid by local currency.

    Dear Guru, We've set up all stuffs in FBZP but happened to see one small issue. In case of foreign currency invoice, running F110 to the end we have payment document in foreign currency. But our client wants to create payment documents in local curre

  • HELP!! ITUNES 10.5

    I tried downloading the new iTunes 10.5 but i keep getting an message that the installation failed due to an unexpected error. How can I download iTunes? Actually my old iTunes doesn't open now either...

  • BlackBerry Calendar issue

    i'm having problems with the calendar app. When I create an event, it won't show up on the day, week or month view but if I search for the event it'll be there. I've updated all my software to the latest versions but that doesn't seem to have helped

  • Oracle DB+AS+MidTier Installation

    Hi, I am bit confused with the Oracle termonology. I want to install the Oracle Infrastructure and Portal and Midtier and AS. What does each term specifically signifies? What I am aware of is the Oracle Database installation, all the above terms seem