Can't enable DMA mode with JMicron controller
Working with this 975x is like pulling teeth.
Why does the secondary PATA port have to be the Jmicron POS?! How can I get it to just use the intel controller?
DMA won't work for my DVD drive hooked up to the secondary ATA. I have it set to DMA if available, and it keeps using PIO mode.
Quote from: dejanos on 21-November-06, 21:28:38
I suggest that you read all other post about the JMicron issues where lots of things are explained .We have already discussed about showing DMA under SCSI.SCSI doesn't inform you about the DMA.It simply works,or not.
So it's that simple,if your DVD/RW drive read an burn fast, then everything is OK. Don't worry about the DMA.
Yes, I can confirm that also, for what it is worth. I set up my new board some days ago but hadn't really tested the DVD drive yet. Although I felt and suspected everything was normal, I was very concerned after seeing and reading the problem threads on these boards. I have now tested it with a full 4.7GB burn and it took 13-14 minutes on a 4x DVD+RW, which is completely normal. Also, on checking the Nero log I see it reports "DMA: OFF" which is clearly false, but which a lot of people are complaining/worried about. Copying between hard drives (see specs) 'seems' to go at the right speed too. Windows reports 2 minutes when I dragged 3.12Gb across (quick test to see time although I cancelled it half way - not sure of the maths but seems about right from experience)
Obviously Nero (and probably other applications) are NOT able to detect the true access mode of IDE drives under the JMicron controller.
My specs:
P965 Neo-F
2x512MB Corsair 533Mhz
Asus 7600GT
320Gb SataII Western Digital (JMicron)
IDE:
Lite-On SHW-160H6S DVD (master)
200GB (slave) Spinpoint
Bios: 1.5; JMicron: supplied CD - 1.7.1.0 from device manager
Similar Messages
-
Can one enable turbo mode with acpi_cpufreq driver?
Does anyone know if I can enable turbo mode with cpufreq driver? (acpi_cpufreq)
I was able to achieve it with intel_pstate driver, but do not see any way with acpi_cpufreq. Or does performance governor automatically has turbo enabled?
I am using Intel Xeon E5-2650, which has default frequencies of 1.2 - 2.6GHz, with turbo level of 3.4GHz.
Last edited by kdar (2014-08-16 22:39:53)Turboboost is not always exposed to the firmware.
http://askubuntu.com/questions/37618/is … st-working -
Opensource ATI can't switch video modes with CTRL+ALT+plus/minus
Hi,
I've updated my system to the new xorg-server and video driver.
The new video driver (xf86-video-ati-6.7.195-1) can't switch video modes with the CTRL+ALT+plus/minus key combination. I use this key combination a lot and before I upgraded to the new driver this worked :-(
Anybody else having this problem?
I know I can use xrandr to change the video mode, but it doesn't exactly do what I want. Xrandr changes the video mode, but also changes the resolution of the screen, while CTRL+ALT+plus/minus keeps the resolution intact (the screensize is bigger than what is seen on the monitor, you can scroll the screen by moving the mouse "out" of the monitor)
Is there a fix/patch that I can try?It looks like this is the result of the new opensource ati drivers use the new xrandr.
One of the changes is that it will treat the screen section in xorg.conf differently. Browsing through video modes, using the CTRL+ALT+plus/minus key combination, that are defined in the screen section in xorg.conf is not possible anymore. -
Slow Data DVD Burning, Cannot enable dma mode, takes 20 mins to burn 700mb
so yea, i got a brand new comp. a dv7t-2200. it should burn a dvd as fast as my moms 400$ acre. but nope. so far hp has sent me a new dvd drive, no fix. from doing research i should enable the dma mode in the device manager under the ap-something controller, but there is no primary or 2ndary controller. there is only Intel(R) ICH9M-E/M SATA ACHI Controller thats all. can someone help here? this is really annoying. and im using windows explorer to burn the file to dvd. there just movies but they should burn in about 4 mins compaired to 20. is there any way to enable dma some how or to fix this problem? please let me know ne help would be great
I have the same problem, plus i can assert that EVEN the usb burner il slow and the system seems slowed itself (like as having dma disabled).
-
Can't Enable DMA for My Ide Drives
I am using Msi 865PENeo2 with P4 2.4C which I Just bought a week ago.
when i install the Enable DMA Drivers from the CD bundled with the mainboard.
MyPc will not reboot back to windows again and can only boot back to windows when I start on safe mode
Pls helpThis was an error displayed on my screens saying that my operating system is not currently supported by the install package
Any other ideas besides changing the OS coz I'm using Win 98 ?
How do I install a new OS without reformating and deleting my mp3 files
Thanx anyway for guiding me so far.This is my last post on this topic.Hope you will have trouble free computing and overclocking. -
How can i enable retina mode in new PS 13.1
Hello guys!
I have macbook pro retina 15. And i update my photoshop to 13.1 But when i open document in 100% zoom all so little and in 200% all so blurry. How i can enable retina mode in new photoshop or i want to draw all layouts x2? Thank you!And now i will create templates with x2 resolution (x2 zoom will in none retina displays) and for another people (who will write html code after my template) templates will be very big and uncomfortably for use.
And another problem is support my current projects, wich i strat on non retina display, know i can draw on 100% zoom and so small or on 200% zoom and so blur )
Please say man, this is big problems?) I thought that adobe will create non-retina emulation in this version... -
Can't enable DMA on cd rom drive
Hey,
How could I get my CD ROM drive, recognized as /dev/sr0, to get Direct Memory Access enabled?
The reason for this is when I use mplayer to read from an audio CD, the cache gets emptied pretty fast (and without it, audio is too choppy to listen to), and I'm guessing enabling DMA will make it run smoothly.
After some searching I tried 'hdparm':
hdparm -d /dev/sr0
And I get:
/dev/sr0:
HDIO_GET_DMA failed: Inappropriate ioctl for device
Any help would be appreciated!Thanks for the swift reply.
Here's the result:
[pilgrim@archie ~]$ mplayer cdda:// -cache 8192
MPlayer SVN-r34426-4.6.2 (C) 2000-2011 MPlayer Team
181 audio & 384 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing cdda://.
Can't open CDDA device.
Failed to open cdda://.
Exiting... (End of file)
When I manage to get it playing I'm running:
[pilgrim@archie ~]$ sudo mplayer -cdrom-device /dev/sr0 cdda:// -cache 8192
MPlayer SVN-r34426-4.6.2 (C) 2000-2011 MPlayer Team
181 audio & 384 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing cdda://.
Found audio CD with 20 tracks.
Cache fill: 0.00% (0 bytes)
Track 1
Cache fill: 19.91% (1669920 bytes)
rawaudio file format detected.
Cache not responding! [performance issue]
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 2 ch, s16le, 1411.2 kbit/100.00% (ratio: 176400->176400)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 8.7 (08.7) of 4454.4 ( 1:14:14.3) 0.6% 13%
Notice how just 8 seconds in, the cache dropped from 20 to 13, and it won't refill... it just keeps emptying until I get the choppy behavior again. I think making the cache huge would be a workaround but maybe there's a better solution.
Last edited by pilgrim689 (2011-12-26 19:33:38) -
Can't enable developper mode on Nokia N9: server d...
Hi all,
I'm trying to enable developper mode for the first time on my Nokia N9 and I get the following message:
Download failed
Can't complete the download.
Connection to the application provider was lost.
Try again later.
I don't know if the problem is on my side or on Nokia server side. Can someone tell me if they are able to download the developper mode additional applications from Nokia at the moment?
Thanks and have a good one!
Solved!
Go to Solution.I'm scared of flashing the phone... And I'll lose the warranty...
Have you seen this (attachments). There are some files missing...
I talked to my Nokia service center, they told me that I'm not supposed to use the developer mode??? Is that just an excuse because they can't handle the problem? I have nobody to ask and trust here.
Attachments:
Developer mode CANT INSTALL.png 22 KB -
N9 - Can't enable Developer mode
Hello,
When I am trying to enable developer mode (via WiFi), I get the following error message:
"Download failed
Can't complete the download.
Connection to the application provider was lost. Try again later."
Any idea?
Solved!
Go to Solution.Dear sir
i have a same problrm .....]
my phone is NOKIA N9
NOKIA N9 v.PR1.3 DFL61 HARMATTAN 40.2012.21-3 PR 005
intallation time i can see this diloge on my mobile ..."""can't complete the download. connection to the application provider was lost"""
pls help to clear the same
i can't install any updation of app & wazaap , moxilla Etc..... -
I am running a MSI Neo Platinum and I went to my Device Manager (XP Home) to click where you can enable DMA, and there was no box to do this.
Will an updated driver fix this? How do I enable DMA when my pc currently won't let me.Quote
Originally posted by hacker
Hi painiac,
I believe that since 98SE, any drive will automaticaly be set to it's highest PIO or DMA setting.
Could be wrong, but remember reading that in a help question when trying to the same thing you are trying to do many moons ago.
You are correct. The DMA is set to auto config ALWAYS, the only other possible change is to manualy select PIO -
Hi,
I buy a X52P DVDROM Combo unit and installed it on IDE 0 slave (with
IDE 0 master my 80 GB HDD) and cannot enable the DMA in the Control
Panel-System-Device manager-CDROM ? And changed after on IDE 1 master, but the same happ....ens
WHY ????????
Did this unit don't support it ? I can't believe this because I have
CDROM's 8 yeard old which allow the DMA to be activated !!! On IDE 1
master I have a CDROM, and on IDE 1 slave I have other CDWRITER (both
with DMA activated)
What's up ?
Thanks a lot.
Best regards,
L.
P.S. I have a via motherboard and installed the latest Via 4in 1
drivers; PIII 800Mhz. !Quote from: Frankenputer on 10-December-04, 09:26:18
Give system specs as well as the OS you are using. As erydos stated XP does this automatically. If in bios you only have "Auto" and "Disabled," choose "Auto." If you are using XP and want to see if you are using DMA, go to device manager and check the properties of each of the IDE channels under IDE ATA/ATAPI Controllers. You'll see a tab labled "Advanced Settings." Mine has for the following for the Secondary IDE channel(optical drives)
Device 0
Device Type...................Auto Detection
Transfer Mode................DMA if Available
Current Transfer Mode....Ultra DMA 4
Device 1
Device Type...................Auto Detection
Transfer Mode................DMA if Available
Current Transfer Mode....Ultra DMA 2
I have Win98SE ! What to do now ?
L. -
Can I use compare mode with dual monitors? (LR 3.5)
Hello.
I'm a new Lightroom user, and was wondering if it's possible to span the compare mode across two monitors, so the curent select is on the left, and the candidate is on the right? This would be extremely helpful for me.
I've seen another thread from 2009 without an answer, and searching forums doesn't seem to turn up much else.
Thanks in advance!
BartYou can use Loupe Locked or Loupe Live on the second screen to make comparisons with the primary screen selecting different pictures or views. Is this a way to meet your needs? Select Loupe Normal, Live or Locked either in the top toolbar on the secondary screen or hold left click on the 2 second screen icon in the primary screen.
Goodl uck -
I cannot get my iPod touch to go into landscape mode either with the calculator or with my Persons Qmix software app. I have no problems on the iPhone or iPad, but it has all of a sudden stopped working. I tried rebooting the OS, a reset and the orientation lock is off on the unit...help?
Well, it went into landscape mode and I used it with QMix several times, then all of a sudden it would not go into landscape mode for ANYTHING not just QMix and Ihave tried double tapping on the bottom and making sure the orientation lock was not on......any other ideas? Im thinking i may have to send it to Apple to get this resolved...
-
How can I enable my ibookG4 with itunes 9.2 and os 10.4.1 to accept iphone 4
What and where can I get an app to bridge the gap?? Thanks
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later
iTunes Store account
Internet access
You don't meet the minimum system requirements to run an iPhone 4. To bridge the gap you would have to update your computer to at least Leopard and update your iTunes. -
How can I enable VPN passtrough with 881-K9 Security Router?
Hi Space!
I need help, because I really cannot find the error in my configuration.
What I want to do is, to enable simple VPN passtrough with a 881 K9 Security Router.
So all VPN traffice travells directly from the internet trough the router (I don't need any inspection or else of this traffic) to a Windows Server behind (and back to the client of course).
[ Internet -> Cisco 889 router -> Windows Server ]
Enclosed you will find my configuration.
The VPN connection cannot be established and the clients are getting connection error 800 most of the time.
Thanks for any hint!
Kind regards,
ChrisActiveX is proprietary to IE and Firefox has never supported ActiveX.
Maybe you are looking for
-
How Can I Get Group By Select Statement To WorK?
How can I get Code2 to work correctly? Code1 works fine. A user enters the customer and a date range on a form and submits request. I get error message in Dreamweaver. You tried to execute a query where the specified expression field3 is not part of
-
How do I specify tab so that it is universal in Unix and Windows Environment
-
I'm trying to download and install the printer dirvers for my Kodak esp 3.2s, but my iMac keeps refusing, stating that : AiOInstaller can't be opened because it is from an unidentified developer. is there any way round this? Many thanks Nuts517
-
Looking for colorist skilled in Speedgrade
Hi im a video director and editor and I use adobe products for all my work beginning to end. I want to incorporate speedgrade into my workflow. Im looking for a colorist who is skilled in coloring video using speedgrade.All projects will be paid. I h
-
I found an iPhone, what now???
I found an iPhone today, 16 gb, AT&T 3G I'm trying to figure out HOW to return it to its owner. I need a passcode to open it and search for a contact phone number? Am I stuck with this thing. Someone surely would like to have this back! Anyone in the