Can't enable my NIC on my new Satellite C660D-10M

Hy there,
My laptop (Toshiba Satellite C660D-10M) came with Free-DOS. I have installed WIndows 7 and all the required drivers from Toshiba website except the driver for my Network Adapter. I can't go to the Internet because of this!
From this page: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
I enter the correct info:
Notebook - Satellite - Satellite C Series - C660D - PSC0WE - Windows 7 32bit.
A) There are no CHIPSET drivers for my laptop here? But i think they are merged with the DISPLAY DRIVER and i could install only them.
B) LAN DRIVER - after installing this driver, in my DEVICE MANAGER -> Network Controller has a question mark and is not installed.
Checked BIOS - it is enabled.
Uninstalled, found my NIC SPecific driver on realtek website. Realtek RTL8139/810X Family Fast Ethernet. -> Installed the driver for win7, ----- NOTHING!!!
I don't know what to do next?
Please can you help me?
Some similair problems:
- http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/e093d50d-e702-4c9b-8906-977cd4294475
- http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/6af7ac06-02ff-4417-9d41-e320a6be1a11
- http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/83fee7bd-1af3-4fa8-b664-9af8ce78e750

You are right about chipset driver. By AMD based notebooks it is integrated with display driver.
The same LAN card has Satellite C660D PSC0UE so the right Win7 32bit LAN driver you can find HERE . It must work. All offered drivers are tested.
Please test it and send some feedback.
Have you installed WLAN driver?
Be sure unknown device in device manager list is definitely related to LAN and not WLAN card.
Bok ;)

Similar Messages

Cannot remove McAfee trial from my brand new Satellite C660D

Got a Satellite C660D yesterday and can't find a way to remove the mcafee trial. I have free mcafee from BT and have tried downloading it but it fails to install. Tried mcafee removal tool but that fails, tried changing uac no good. Straight forward removal from control panal uninstall fails as does the use of ccleaner and other tools???
Anyone any ideas?

After changing UAC back, restarting about 8 times and the same amount of attempts at installing the BT Mcafee program it finally worked. I had at one stage even tried removing all references to mcafee with regedit.
Put the trial back on using restore then about 5 tries later it loaded?

Can't enable S-Video to TV on Satellite P305D-S8834 Vista 64bit

I've been trying to connect my TV thru the S-Video out but the second display won't stay enabled.
I've updated the drivers with Toshiba's latest, using ATI's CCC ver 8.10 and neither will enable second display.
Toshiba's phone Tech Support wants me to send it in for service. I will if I have to but I don't want to.
Specs:
OS: Vista Home Premium, SP, 64 bit
Memory: 4GB
CPU: AMD TurionX2, 64 Bit
Graphics Card: ATI Radeon 3100
Graphics Driver: 8.479-080422a-063870C-Toshiba

Hi charlieboy,
don't no if this will help you, but i had the same prob on my then brand new Tosh P10.
Tosh tec advised return, which i did.
When i got it back i had no probs [microprocessor replaced] i use mine for karaoke. So i have to work with all sorts of TV's and i new the correct way to set up, which by the way techinician did not know or never mentioned this is how i do it.
As already been said computer must be OFF, lead connected ,switch TV ON, [ yes ON]
Select display properties, settings. Now drag and drop the number two [2] display on top of display one [1] follow on screen message to apply.
Make sure you tick the two boxes use this, and extend under screen resolution box.
Hope this helps.
By the way; Tosh told before sending back to use recovery disc to clear every thing out that was not preinstalled bit of a bind if you have put programes in
colin

Can not enable wi-fi on ipad 2. Any suggestions?

I can not enable wi-fi on my new ipad 2. I have tried resetting network settings & restoring settings, but wi-fi remains greyed out under settings and is listed as N/A under settings-about. Any suggestions?

have you tried to see if a reboot fix it?
http://support.apple.com/kb/ht1430

I've just enabled match and now my new purchases do not show up on my i tunes account. i can only play them buy going in to purchased playlist.

I've just enabled match and now my new purchases do not show up on my account. I can only access them buy going into purchase playlist?

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

HT4046 why i can't enable the voiceOver function with my new labtop(window 7 64bits) with my ipod shuffle?

why i can't enable the voiceOver function with my new labtop(window 7 64bits) with my ipod shuffle?

even try to update the latest itunes but still can't fix it
is it window's problem?
it work fine in my orginal desktop with window XP
PS: ipod shuffle 3rd

Can't enable iMessage with my Apple sign in info on my iPad. It used to work. Got a new iMac yesterday, any correlation?

Can't enable iMessage with my Apple sign in info on my iPad. It used to work. Got a new iMac yesterday, any correlation?

Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

I'm looking to remotely disable then re-enable a NIC ... possible?

My organization is having quite a few issues now that we're finally rid of XP. We think we've narrowed it down to the default setting of Win 7 NIC cards Power Management, specifically the "Allow the computer to turn off this device to save power"
checkbox being enabled (checked). Example below:
We've had hundreds of complaints of disconnects and issues re-connecting when people leave their computer at lunchtime or an extended break, and on a few dozen of those specific people we have tried disabling this (manually) and they report the issue has
stopped for them. We'd like to test this on a few dozen more people, but they're at remote locations and we'd have to do it remotely. Making the actual change isn't a problem, it's a specific registry key located at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002bE10318}\
- the problem is the NIC needs to be disabled and re-enabled after changing the key to make it stick, otherwise it seems to revert back to a default (which is that box checked on).
Does anyone know of a way to disable and then re-enable a NIC on a remote machine via PowerShell? We have full remote access to these machines, so we can copy scripts to them or invoke-command if need be.
Thanks in advance.
[email protected]

If running PowerShell V3, you can take advantage of disconnected remote sessions to continue running code even if the session has been disconnected (and in theory should work if the NIC drops).
Something like this should work:
#Create the session option; Drop is important so the command execution continues on after the disconnect
$Option = New-PSSessionOption -OutputBufferingMode Drop
$Session = New-PSSession -ComputerName 'client1' -SessionOption $Option
Invoke-Command -Session $Session -ScriptBlock {
#Registry code work goes here
$NetAdapter = Get-WMIObject Win32_NetworkAdapter -filter "Name='Intel(R) 82579LM Gigabit Network Connection'"
$NetAdapter.Disable()
$NetAdapter.Enable()
#This may not be needed since the connection will drop anyways
Disconnect-PSSession $Session
#Wait a bit and see if the system comes up as the commands should still be running remotely
Note: The clients need to be running V3 for this to work.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

All music gone, transferred to 'other', can't enable disk use on iTunes

it seems like there are a lot of people with similar problems but nothing exact..here goes:
-doing research on my macbook and i get a popup from itunes saying that my ipod was disconnected improperly (i didn't touch it and i wasn't even messing around on itunes)
-ipod restarts and reconnects with itunes and i get another pop up saying that "itunes cannot read the contents of the ipod. go to ipod summery and preferences and restore.
-i would just restore it and reload all the music butttttt like an idiot..i dont keep my music in my itunes cause it takes up way too much space and i never used any external hard drive or anything to back my music up (again..idiot..i know)
-so i read though a ton of forums and posts and see that im not the only one that this has happened to and everyone is saying to put it in disc mode, go to removable disk, copy all the music back to my macbook, restore my ipod, and put all the music back on. i also read something about clicking on my ipod icon on my desktop and going under ipod controls and changing some names (i dont konw if that was jsut for windows or what) but i also dont have an option of ipod controls
-the problem with that is that i can put my ipod into disk mode but that does me no good because i can't enable disk use on itunes because literally..my only option when i plug in my ipod is to restore it. under devices on the left hand menu, it just says ipod..not ipod with a bunch of sub categories like music and playlists and stuff..just ipod.
-normally..i would just give up and restore it but when i go to the about section on my actual ipod, it says that i have 50GB of "other" so that means that stuff is definitely still on it.
-so finally..my main question is:
is there ANY way to enable disk use on my iTunes without doing it through my iPod?..like i explained..when i plug my iPod in..that is not an option. and also..would i benefit from just bringing my laptop and ipod into an apple store and asking for help there or will that just be a waste of time?

The library on the iPod will have been damaged - hence the reason it appears empty, but the media files are still there taking up space and reported as "Other". Check out this post from Zevoneer for some iPod recovery options.
http://discussions.apple.com/thread.jspa?messageID=6273675&#6273675
Some of the tools mentioned will require a working library, but I know from experience that you can use the manual recovey method when the library is missing or damaged. If you're struggling for space you probably need to go & buy an external drive before you start. Stick the iPod in disk mode. Hold Menu+Select > 6 seconds (resets iPod) followed immediately by hold Previous & Select > 6 seconds. You can now drag the contents of iPod_Control\Music to your new hard drive. You may need to reveal hidden files & folders. Once they are on your hard drive you can create a new empty library on the drive, then import the files you have reovered and consolidate the imported library so that the files are in a standard artist\album\## track structure rather that the iPod's obscured names.
tt2

How can I enable embedded pl/sql gateway to run on port 80

I have a new 11G install on OEL 4.0, database created. I would like to be
able to access the instance using the pl/sql gateway. Works fine with
port 8080, the default. How to I enable it to run on port 80?
I found this statement in the following docuementation:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb22pro.htm#ADXDB2500
Using HTTP(S) on Nonstandard Ports
By default, HTTP listens on a nonstandard, unprotected port: 8080. To use HTTP(S) on
the standard port, such as 80, your DBA must chown the TNS listener to setuid ROOT
rather than setuid ORACLE, and configure the port number in the Oracle XML DB
configuration file /xdbconfig.xml.I have root priviledges on the box.
I've tried setting the listener file permissions:
chown root:dba /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
chmod 6775 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
Also put root in the dba group.
The permissions turn out like this:
-rwsr-sr-x 1 root dba 830854 Jun 17 21:04 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
I stopped the listener, bounced the database, and started the listener again.
But it still shows the process being owned by oracle:
oracle 29682 1 0 21:08 ? 00:00:00 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr LISTENER -inherit
Changing the port is easy:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings
* can interfere with Web browsing.I can set the port. Just can't talk to it.
This is the entry from the listener log:
<msg time='2008-07-03T15:40:09.741-06:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='hostname'
host_addr='xxx.xxx.xxx.xxx'>
<txt>TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
</txt>
</msg>
So this looks like an permissions problem. But where? I posted
this on the apex forum here:
Re: How can I enable embedded pl/sql gateway to run on port 80
They suggested asking here.

No, that thread did not provide the information that I need. Some more data:
I have the port set to 8080:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
I can set the port. Just can't talk to it.

Can I enable battery percentage on my iPod touch 4th generation running iOS 5.1.1 without being jailbroken?

Can I enable Battery percentage on my iPod touch 4th generation running iOS 5.1.1 without beig jailbroken?

You can enable battery % on ipod touch 4g without jailbreaking it you can use backup bot for itunes. Thats how i enabled it on mine. Step 1: goto http://www.icopybot.com/ibackupbot_setup.exe download and install it if you have windows. Step 2: Next create a backup of your device in iTunes and then CLOSE iTunes (or else you may run into problems later on) do not lock the backup with a password. Step 3: Open iBackupBot. Click the backup you just made Next click "Path" to sort by Path. Step 4: Look for Library/Preferences/com.apple.springboard.plist and double click it. On the registration screen that comes up, hit cancel. Step 5: Find <dict> and create a new line after it. Then add this:
<key>SBShowBatteryLevel</key>
<true/>
Step 6: Hit CTRL + S or just the save button at the top left corner of that editor window. Now close the window.
Step 7: Right click that same backup you just edited
Step 8: click restore
Step 9: Done! If you don't see the changes, reboot your iPod.
Enjoy I hope you found this useful!

My account was deleted for security issues. I made a new account, but I can't syncronise my apps with this new account. I bought a new Iphone and would like to transfer the apps ans music on this new one. Can somebody help me?

My account was deleted for security issues. I made a new account, but I can't syncronise my apps with this new account. I bought a new Iphone and would like to transfer the apps ans music on this new one. Can somebody help me?

Why would you make a new account? This will likely cause many problems. Just get you old account enabled.
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
Frequently Asked Questions About Apple ID
Everything you purchased with the old account will always be tied to that account. You will have to authorize the computer for that account and you will have to update the apps from that account.

Can't enable disk use on Ipod

I've recently upgraded my Ipod software to 3.1 and Itunes to 6. I've followed the tutorial to make the Ipod be a hard drive and when I click on Ipod in Itunes and go down to the Ipod icon in the lower right corner and click on that, it does NOT look like the screen on the tutorial and on the screen that I see, "enable disk use" is greyed out. I'm trying to troubleshoot why my synching contacts has allowed duplicates as well as loading in emails, which I don't want. But first I need to figure out why I can't enable disk use.

I can relate...sort of! My iTunes doesn't even HAVE that option. Can you believe it??? It's a brand new (although outdated) 40gb HP iPod, and I'm running HP version of iTunes 6. The manual says how I should enable (configure) the iTunes for use as hard disk--but it failed to tell me that no freaking icon would appear in that little corner. FRUSTRATED
Sigh.

ORA-00385: cannot enable Very Large Memory with new buffer cache 11.2.0.2

[oracle@bnl11237dat01][DWH11]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Mon Jun 20 09:19:49 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount pfile=/u01/app/oracle/product/11.2.0/dbhome_1/dbs//initDWH11.ora
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
DWH12.__large_pool_size=16777216
DWH11.__large_pool_size=16777216
DWH11.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DWH12.__pga_aggregate_target=2902458368
DWH11.__pga_aggregate_target=2902458368
DWH12.__sga_target=4328521728
DWH11.__sga_target=4328521728
DWH12.__shared_io_pool_size=0
DWH11.__shared_io_pool_size=0
DWH12.__shared_pool_size=956301312
DWH11.__shared_pool_size=956301312
DWH12.__streams_pool_size=0
DWH11.__streams_pool_size=134217728
#*._realfree_heap_pagesize_hint=262144
#*._use_realfree_heap=TRUE
*.audit_file_dest='/u01/app/oracle/admin/DWH/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='/dborafiles/mdm_bn/dwh/oradata01/DWH/control01.ctl','/dborafiles/mdm_bn/dwh/orareco/DWH/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='DWH'
*.db_recovery_file_dest='/dborafiles/mdm_bn/dwh/orareco'
*.db_recovery_file_dest_size=7373586432
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DWH1XDB)'
DWH12.instance_number=2
DWH11.instance_number=1
DWH11.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat01-vip)(PORT=1521))))'
DWH12.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat02-vip)(PORT=1521))))'
*.log_archive_dest_1='LOCATION=/dborafiles/mdm_bn/dwh/oraarch'
*.log_archive_format='DWH_%t_%s_%r.arc'
#*.memory_max_target=7226785792
*.memory_target=7226785792
*.open_cursors=1000
*.processes=500
*.remote_listener='LISTENERS_SCAN'
*.remote_login_passwordfile='exclusive'
*.sessions=555
DWH12.thread=2
DWH11.thread=1
DWH12.undo_tablespace='UNDOTBS2'
DWH11.undo_tablespace='UNDOTBS1'
SPFILE='/dborafiles/mdm_bn/dwh/oradata01/DWH/spfileDWH1.ora' # line added by Agent
[oracle@bnl11237dat01][DWH11]$ cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
#kernel.shmall = 4294967296
kernel.shmall = 8250344
# Oracle kernel parameters
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
kernel.shmmax = 536870912
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
net.ipv4.tcp_wmem = 262144 262144 262144
net.ipv4.tcp_rmem = 4194304 4194304 4194304
Please can I know how to resolve this error.

CAUSE: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
ACTION: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters

I have my photos on an eternal USB connected drive. I am trying to import them to PSE. The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.

The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.

"Copy" is normally used when connecting a camera or card reader.
Simply copy or move folders from your external drive to your computer hard drive, then from the Organizer menu click:
File >> Get Photos & Videos >> From Files & Folders
Then navigate to the new location on your internal hard drive.

Can't enable my NIC on my new Satellite C660D-10M

Similar Messages

Maybe you are looking for