Can't enter numbers with shift (while entering a password), Can't enter numbers with shift (while entering a password)

Okay, here is the deal.
Whenever I login or a something asking my password pops up I can't enter the numbers while using shift.
I have to put CAPS LOCK on for some reason, and I don't know why.
I recently formatted my mac and re-installed Mountain Lion and since then this error occurs. Very strange.
Any ideas?

Geoff,
I couldn't correct all the font duplicates because some were used by the system.
If you want to know more about OS X font management, read Font Management in OS X, by Kurt Lang.
Not sure what you mean by Update (Combo) I have automatic updates turned on. Do I need to do still more to assure an updated system?
The only reason I suggested that was because your Apple Discussions "My Settings" system profile lists Mac OS X (10.6.3) as your current system.
;~)

Similar Messages

As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?

As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?
It may have half installed the software so dose anyone know if i can reinstall or delete what it has installed?

after using FCS remover run disc repair:
shut down the Mac
Hold the Shift key on keyboard and start up the Mac
The Mac will run the repair tasks it takes 10- 30 minutes, then it will boot up normally
insert the FCS DVD in the drive and install FCS again.

How can i make a soft return with pages shift enter does not work!

how can i make a soft return with pages shift plus enter does not work!!

On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.

HT2534 My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes accou

My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????

Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918

Can't opened elevated prompt with ctrl-shift-enter

Here's an odd one. I've seen it several times over the last year on different computers - all Windows 7, but both Home Premium and Pro. I believe all were 64 bit.
When I type cmd in the Search Programs and Files box and hit ctrl-shift-enter, it opens an explorer window showing c:\windows\system32.
The same thing happens if I type cmd.exe and and hit ctrl-shift-enter.
If I type command and and hit ctrl-shift-enter, then I get the elevated prompt, as it should do.
Anyone know how to fix this? SFC comes up fine, the machine has been scanned for infections.

Hi
You can try the reg option in this article:
http://superuser.com/questions/453409/how-can-i-always-run-the-command-prompt-as-administrator
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT1430 While I open my yahoo mail, it always appear "password missing" and ask me to enter the password with 8 digit. My email password is not 8 digit. How can I re-open my yahoo mail box on iphone.

While I open my yahoo mail on iphone, it always appear "password missing" and ask me to enter the 8-digit password. My email password is not 8-digit. How can I get the password ?

Hi Chandice
Have you tried to remove the email account and adding it back on again?

Problem with entering integer numbers from keyboard

I have written this simple code:
import java.io.*;
public class Simple{
     public static void main(String[] args)throws Exception{
          System.out.println("Enter two integer numbers: ");
          BufferedReader enter=new BufferedReader(new InputStreamReader(System.in));
               int first=Integer.parseInt(enter.readLine());
               int second=Integer.parseInt(enter.readLine());
          System.out.println("Result is: "+(first+second));
and it works fine if I type first number, press Enter, then type
second number and press Enter.
But if I type in one line: 2 3 (with space between) I get run-time error:
Exception in thread "main"...bla...bla at java.lang.Integer.parseInt(Integer.java)...
I know that error is coming from Integer.parseInt(string) in my code, but I
don't know how can I avoid it.
In C that is rather simple scanf("%d %d",&first,&second), but in Java it's much more
complicated.
Do you have any suggestions how to solve this problem?

store the user input in a string
use a StringTokenizer st
then
while(st.hasNext())
int first=Integer.parseInt(st.nextToken());
but you should really catch a NumberFormatException
walker

MacBook Pro Keyboard problems with shift and enter

would really appreciate help here. neither of the shift keys works, as you can see. the enter key doesn't do anything either. some of the function keys are also not working but i'm less concerned by those.
i activated the keyboard viewer and can see that the key between the right command key and the left arrow key now acts as the enter key. however the shift keys don't register at all.
i'm pretty sure the keys all worked when i first bought the computer in november. also keys work normally when i use the wireless keyboard.
i get the problems whether the wireless keyboard is connected or not.
does anyone know the answer to this problem - it's also annoying not having access to the question mark or any of the smbols above numbers - caps lock doesn't give you access...

If the problem is the same one I have and many others have expressed, it's the small gold ribbon found beneath the battery. It seems that lots of them are failing, although Apple won't acknowledge the problem and the fix is expensive (~$300).
To find out if it is the problem, remove the battery (with the computer plugged in and powered on), press down on the small cable, and see if the keyboard/mouse become responsive. Some people have taped the cable with success, but mine only works with constant hard pressure. So, it's been retired as a laptop and has essentially become a desktop with a USB cable/mouse.

I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but i i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and can't find the solution. This should be a basic thing.

I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but if i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and i can't find the solution. This should be a basic thing. How frustrating !!

pedrofromsydney wrote:
€ 55,555.00
that's the result i get. Still why can't i just type for ex. 29.55 and stay like that on the cell ? Why does it always change to 2955 or 2955.00. ??
I don't understand this
It appears you have the cell formatted to Currency, with the default two decimal places.
What I don't understand, though is how Numbers arrived at a result of fifty five thousand five hundred fifty five on your entering the exact keystrokes in Yvan's post:
an equals sign, followed by five ones, followed by a forward slash, followed by a 2.
Here's the result I get:
Could you do the following:
Open a NEW Numbers document using the Blank template.
Drag the Row and Column control (bottom right corner) to reduce the table to two columns and three rows.
Enter the words "My table" in cell A1.
Click on cell B2 to select it, then enter the formula
=11111/5
Use only those eight keystrokes; do not include any commas, periods or other characters not shown.
Click on B2 again to select it.
Open the inspector and choose the Cell Format button.
Do not make any changes in the Inspector window.
Drag the Inspector window to the position shown in my screen shot.
Take a screen shot that includes the Formula bar, the Table (with cell B2 selected) and the Cell Format Inspector pane (the same screen area as in my screen shot above).
Post the screen shot in a reply to this post.
I'm hoping there will be some clues as to what's happening here in the screen shot. Procedure for taking and posting a shot of part of the screen follows.
Regards,
Barry
SCREEN SHOTS (Selected area)
Place the mouse pointer at the top left corner of the area you want to include.
Press shift-command-4.
The mouse pointer will change to a plus sign on a circle.
Hold down the mouse button and drag to the bottom right corner of the area you wan to capture.
Release the mouse button.
The screen shot will be saved to your desktop with the name "Picture 1" (The number will be different if you have taken other screen shots).
POSTING
In the Compose frame, place the Insertion point at the location you want the picture to be inserted.
Click the camera icon above the compose frame to open the Insert Image dialogue.
Click Choose file to open the Choose dialogue.
If necessary, navigate to the Desktop and click on the 'by date column header to sort the files by date, most recent at the top.
Select the most recent picture file.
Click Choose.
Wait for the picture's file name to appear beside Choose file.
Click insert image.
Done.
B.

Can a .pdf created with Livecycle allow a user to enter a % symbol in a numeric or decimal field?

What I've found so far is that the only way to get the % symbol into a numeric/decimal field at all is to set the "display pattern" to display the % symbol after numbers have been entered into the field.
The reason I want the field to be numeric and not text is because I have to run a FormCalc caculation that populates a third field.
(NumericField1 * Numeric Field2*) + NumericField1

Thanks for the reply Niall.
I ended up chanigng the numeric field to a decimal field instead, and added the following display pattern: num{zzzz9.99'%'}
So although the user can't enter a % symbol into the field, a % symbol automaticaly populates when the user enters a number.
My criteria involved ensuring that a user could not enter a number with more than two numbers after the decimal, so I also set a trailing digits max of 2 (in the Obect > Field settings)
This is the FormCalc formula I used in the "calculate" event to calculate the salary increase amount request: (DecimalField1 * NumericField2) *.01 + NumericField2
This formula is meant to calculate the salary amount a manager is requesting their employee's salary be increased to.

How can i get the while loop to enter a different loop beside the first one

I can't seem to figure out how to change the value to enter into one of the other while statements in the script. I am new to this and can't seem to find anything how to enter in the information to be able to go to different while statements and then run
what is located in that statement.
The script is supposed to let me choose between TC, MonsterLock, and Cyc and then jump to the while statement that is associated with one of them and then run what ever is located in that block. All i am getting is a infinite loop and it never sees the other
while loops. I have 3 set up the go along with the first statement but no matter what i type in for them it always looks at the first while statement and stays there.
Can someone please help me with having it do what i stated earlier.
write-host "This script sets up DATABASE Staging"
$ProductionDistro = Read-Host -Prompt "Which production do you `enter code here`want to run?(TC/MonsterLock/Cyc)"
While($ProductionDistro -notmatch "(TC|MonsterLock|Cyc)"){
write-host "You have entered an error" -ForegroundColor Red
write-host "You must type TC or MonsterLock or Cyc"
write-host "you typed $ProductionDistro"
write-host "This script sets up DATABASE Staging"
$ProductionDistro = Read-Host -Prompt "Which production do you `enter code here`want to run?(TC/MonsterLock/Cyc)"
while($ProductionDistro -match $TC) {
write-host "Sets up location you want to run staging"
$ElementDistro = Read-Host -Prompt "Which Element do you want to run? (DATABASE1/DATABASE2/DATABASE3/DATABASE4/ALL)"
While($ElementDistro -notmatch "(DATABASE1|DATABASE2|DATABASE3|DATABASE4|ALL)") {
write-host "you have enterd an error" -ForegroundColor Red
write-host "You must type DATABASE1 or DATABASE2 or DATABASE3 or DATABASE4 or ALL"
write-host "you typed $ElementDistro"
write-host "set location you want to run staging"
$ElementDistro = Read-Host -Prompt "Which Element do you want to run? (DATABASE1/DATABASE2/DATABASE3/DATABASE4/ALL)"
While($PrductionDistro -match $MonsterLock){
write-host "Sets up location you want to run staging"
$ElementDistro = Read-Host -Prompt "Which Element do you want to run? (DATABASE1/DATABASE2/DATABASE3/DATABASE4/ALL)"
While($ElementDistro -notmatch "(DATABASE1|DATABASE2|DATABASE3|DATABASE4|ALL)") {
write-host "you have enterd an error" -ForegroundColor Red
write-host "You must type DATABASE1 or DATABASE2 or DATABASE3 or DATABASE4 or ALL"
write-host "you typed $ElementDistro"
write-host "set location you want to run staging"
$ElementDistro = Read-Host -Prompt "Which Element do you want to run? (DATABASE1/DATABASE2/DATABASE3/DATABASE4/ALL)"
while( $ElementDistro -match $DATABASE1 ){
function Execute-MySqlcommand {param( [string]$Server, #the host of the SQL server
[string]$Database1, #the name of the database
[System.Data.MySqlclient.MySqlcommand]$Command) #the command to execute (name of stored command)
$mysqlConnection = new-object System.Data.MySqlclient.MySqlConnection
$MySqlConnection.ConnectionString = "DROP_VIEW DATABASE.BTXADDR;DROP_VIEW DATABASE.BTXSUPB;CREATE_VIEW DATABASE.BTXADDR FOR DATABASE1.DATABASE1S2.BTXADDR;CREATE_VIEW DATABASE.BTXSUPB FOR DATABASE1.DATABASE1S3.BTXSUPB"
$MySqlConnection.ConnectionString = "TRUNCATE TABLE DATABASE1.DATABASE1S2.BTXADDR;TRUNCATE TABLE DATABASE1.DATABASE1S3.BTXSUPB; INSERT INTO DATABASE1.DATABASE1S3.BTXSUPB SELECT * FROM DATABASE1.DATABASE1S2.BTXSUPB; select count(*) from DATABASE1.DATABASE.BTXADDR; select count(*) from DATABASE1S.DATABASE.BTXADDR; select count(*) from DATABASE1.DATABASE.BTXSURB; select count(*) from DATABASE1S.DATABASE.BTXSUPB;"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $mysqlConnection
$mysqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$mysqlConnection.Close()
if ($Result -gt 0) {return $True} else {return $False}
function Execute-MySQLCommand {param( [string]$Server, #the host name of the SQL server
[string]$DATABASE1, #the name of the database
[System.Data.SqlClient.SqlCommand]$Command) #the command to execute (name of stored procedure)
$sqlConnection = New-Object System.Data.SqlClient.SqlConnection
$sqlConnection.ConnectionString = "DATABASE_CONNECT_STRING=DSN=DATABASE1;Description=DATABASE1;Trusted_Connection=Yes;WSID=Server;DATABASE=DATABASE1;DATASET=DEFAULT"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $sqlConnection
$sqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$sqlConnection.Close()
if ($Result -gt 0) {return $TRUE} else {return $FALSE}
function Copy-File {
#.Synopsis
# Copies all files and folders in $source folder to $destination folder, but with .copy inserted before the extension if the file already exists
param}($DATABASE0980453.pkg,"d/DATABASE1/code_stg")
# create destination if it's not there ...
#mkdir $destination -force -erroraction SilentlyContinue
foreach($original in ls $source -recurse) {
$result = $original.FullName.Replace($source,$destination)
while(test-path $result -type leaf){ $result = [IO.Path]::ChangeExtension($result,"copy$([IO.Path]::GetExtension($result))") }
if($original.PSIsContainer) {
# mkdir $result -ErrorAction SilentlyContinue
# } else {
copy $original.FullName -destination $result
cd /d/DATABASE1/code_stg
install ../DATABASE0980453.pkg
while($ElementDistro -match $DATABASE2 ) {
function execute-MySqlcommand {param( [string]$Server, #the host of the SQL server
[string]$DataBase2, #the name of the database
[System.Data.MySqlclient.MySqlcommand]$Command) #the command to execute (name of stored command)
$mysqlConnection = new-object System.Data.MySqlclient.MySqlConnection
$MySqlConnection.ConnectionString = "DROP_VIEW DATABASE.BTXADDR;DROP_VIEW DATABASE.BTXSUPB;CREATE_VIEW DATABASE.BTXADDR FOR DATABASE2.DATABASE2MS2.BTXADDR;CREATE_VIEW DATABASE.BTXSUPB FOR DATABASE2.DATABASE2S3.BTXSUPB"
$MySqlConnection.ConnectionString = "TRUNCATE TABLE DATABASE2.DATABASE2S2.BTXADDR;TRUNCATE TABLE DATABASE2.DATABASE2S3.BTXSUPB; INSERT INTO DATABASE2.DATABASE2S3.BTXSUPB SELECT * FROM DATABASE2.DATABASE2S2.BTXSUPB; select count(*) from DATABASE2.DATABASE.BTXADDR; select count(*) from DATABASE2S.DATABASE.BTXADDR; select count(*) from DATABASE2.DATABASE.BTXSURB; select count(*) from DATABASE2S.DATABASE.BTXSUPB;"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $mysqlConnection
$mysqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$mysqlConnection.Close()
if ($Result -gt 0) {return $True} else {return $False}
function Execute-MySQLCommand {param( [string]$Server, #the host name of the SQL server
[string]$DATABASE2, #the name of the database
[System.Data.SqlClient.SqlCommand]$Command) #the command to execute (name of stored procedure)
$sqlConnection = New-Object System.Data.SqlClient.SqlConnection
$sqlConnection.ConnectionString = "DATABASE_CONNECT_STRING=DSN=DATABASE2; Description=DATABASE2; Trusted_Connection=Yes;WSID=Server;DATABASE=DATABASE2;"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $sqlConnection
$sqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$sqlConnection.Close()
if ($Result -gt 0) {return $TRUE} else {return $FALSE}
function Copy-File {
#.Synopsis
# Copies all files and folders in $source folder to $destination folder, but with .copy inserted before the extension if the file already exists
param}($DATABASE0980453.pkg,"d/DATABASE2/code_stg")
# create destination if it's not there ...
#mkdir $destination -force -erroraction SilentlyContinue
foreach($original in ls $source -recurse) {
$result = $original.FullName.Replace($source,$destination)
while(test-path $result -type leaf){ $result = [IO.Path]::ChangeExtension($result,"copy$([IO.Path]::GetExtension($result))") }
if($original.PSIsContainer) {
# mkdir $result -ErrorAction SilentlyContinue
# } else {
copy $original.FullName -destination $result
cd /d/DATABASE2/code_stg
install ../DATABASE0980453.pkg
While( $ElementDistro -match $DATABASE3 ) {
function Execute-MySqlcommand {param( [string]$Server, #the host of the SQL server
[string]$DATABASE3, #the name of the database
[System.Data.MySqlclient.MySqlcommand]$Command) #the command to execute (name of stored command)
$mysqlConnection = new-object System.Data.MySqlclient.MySqlConnection
$MySqlConnection.ConnectionString = "DROP_VIEW DATABASE.BTXADDR;DROP_VIEW DATABASE.BTXSUPB;CREATE_VIEW DATABASE.BTXADDR FOR DATABASE3.DATABASE3S2.BTXADDR;CREATE_VIEW DATABASE.BTXSUPB FOR DATABASE3.DATABASE3S3.BTXSUPB"
$MySqlConnection.ConnectionString = "TRUNCATE TABLE DATABASE3.DATABASE3S2.BTXADDR;TRUNCATE TABLE DATABASE3.DATABASE3S3.BTXSUPB; INSERT INTO DATABASE3.DATABASE3S3.BTXSUPB SELECT * FROM DATABASE3.DATABASE3S2.BTXSUPB; select count(*) from DATABASE3.DATABASE.BTXADDR; select count(*) from DATABASE3S.DATABASE.BTXADDR; select count(*) from DATABASE3.DATABASE.BTXSURB; select count(*) from DATABASE3S.DATABASE.BTXSUPB;"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $mysqlConnection
$mysqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$mysqlConnection.Close()
if ($Result -gt 0) {return $True} else {return $False}
function Execute-MySQLCommand {param( [string]$Server, #the host name of the SQL server
[string]$DATABASE3, #the name of the database
[System.Data.SqlClient.SqlCommand]$Command) #the command to execute (name of stored procedure)
$sqlConnection = New-Object System.Data.SqlClient.SqlConnection
$sqlConnection.ConnectionString = "DATABASE_CONNECT_STRING=DSN=DATABASE3;Description=DATABASE3;Trusted_Connection=Yes;WSID=Server;DATABASE=DATABASE3;"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $sqlConnection
$sqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$sqlConnection.Close()
if ($Result -gt 0) {return $TRUE} else {return $FALSE}
cd /d/DATABASE3/code_stg
install ../DATABASE0980453.pkg
function Copy-File {
#.Synopsis
# Copies all files and folders in $source folder to $destination folder, but with .copy inserted before the extension if the file already exists
param}($DATABASE0980453.pkg,"d/DATABASE3/code_stg")
# create destination if it's not there ...
#mkdir $destination -force -erroraction SilentlyContinue
foreach($original in ls $source -recurse) {
$result = $original.FullName.Replace($source,$destination)
while(test-path $result -type leaf){ $result = [IO.Path]::ChangeExtension($result,"copy$([IO.Path]::GetExtension($result))") }
if($original.PSIsContainer) {
# mkdir $result -ErrorAction SilentlyContinue
# } else {
copy $original.FullName -destination $result
While($ElementDistro -match $DATABASE4 ) {
function Execute-MySqlcommand {param( [string]$Server, #the host of the SQL server
[string]$DATABASE4, #the name of the database
[System.Data.MySqlclient.MySqlcommand]$Command) #the command to execute (name of stored command)
$mysqlConnection = new-object System.Data.MySqlclient.MySqlConnection
$MySqlConnection.ConnectionString = "DROP_VIEW DATABASE.BTXADDR;DROP_VIEW DATABASE.BTXSUPB;CREATE_VIEW DATABASE.BTXADDR FOR DATABASE4.DATABASE42.BTXADDR;CREATE_VIEW DATABASE.BTXSUPB FOR DATABASE4.DATABASE4S3.BTXSUPB"
$MySqlConnection.ConnectionString = "TRUNCATE TABLE DATABASE4.DATABASE4S2.BTXADDR;TRUNCATE TABLE DATABASE4.DATABASE4S3.BTXSUPB; INSERT INTO DATABASE4.DATABASE4S3.BTXSUPB SELECT * FROM DATABASE4.DATABASE4S2.BTXSUPB; select count(*) from DATABASE4.DATABASE.BTXADDR; select count(*) from DATABASE4S.DATABASE.BTXADDR; select count(*) from DATABASE4.DATABASE.BTXSURB; select count(*) from DATABASE4S.DATABASE.BTXSUPB;"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $mysqlConnection
$mysqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$mysqlConnection.Close()
if ($Result -gt 0) {return $True} else {return $False}
function Execute-MySQLCommand {param( [string]$Server, #the host name of the SQL server
[string]$DATABASE4, #the name of the database
[System.Data.SqlClient.SqlCommand]$Command) #the command to execute (name of stored procedure)
$sqlConnection = New-Object System.Data.SqlClient.SqlConnection
$sqlConnection.ConnectionString = "DATABASE_CONNECT_STRING=DSN=DATABASE4;Description=DATABASE4;Trusted_Connection=Yes;WSID=Server;DATABASE=TF90PVS;"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $sqlConnection
$sqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$sqlConnection.Close()
if ($Result -gt 0) {return $TRUE} else {return $FALSE}
function Copy-File {
#.Synopsis
# Copies all files and folders in $source folder to $destination folder, but with .copy inserted before the extension if the file already exists
param}($DATABASE0980453.pkg,,"d/DATABASE4/code_stg")
# create destination if it's not there ...
#mkdir $destination -force -erroraction SilentlyContinue
foreach($original in ls $source -recurse) {
$result = $original.FullName.Replace($source,$destination)
while(test-path $result -type leaf){ $result = [IO.Path]::ChangeExtension($result,"copy$([IO.Path]::GetExtension($result))") }
if($original.PSIsContainer) {
# mkdir $result -ErrorAction SilentlyContinue
# } else {
copy $original.FullName -destination $result
cd /d/DATABASE4/code_st
install ../DATABASE0980453.pkg
While($ElementDistro -match $ALL ){
function Execute-MySQLCommand {param( [string]$Server, #the host name of the SQL server
[string]$DATABASE1,$DATABASE2,$DATABASE3,$DATABASE4, #the name of the database
[System.Data.SqlClient.SqlCommand]$Command) #the command to execute (name of stored procedure)
$sqlConnection = New-Object System.Data.SqlClient.SqlConnection
$sqlConnection.ConnectionString = "(DATABASE_CONNECT_STRING=DSN=DATABASE1;Description=DATABASE1;Trusted_Connection=Yes;WSID=Server;DATABASE=DATABASE1;DATASET=DEFAULT;),(DATABASE_CONNECT_STRING=DSN=DATABASE2; Description=DATABASE2; Trusted_Connection=Yes;WSID=Server;DATABASE=DATABASE2;),(DATABASE_CONNECT_STRING=DSN=DATABASE3;Description=DATABASE3;Trusted_Connection=Yes;WSID=Server;DATABASE=DATABASE3;),(DATABASE_CONNECT_STRING=DSN=DATABASE4;Description=DATABASE4;Trusted_Connection=Yes;WSID=Server;DATABASE=TF90PVS;)"
$Command.CommandType = 1 # 1 is the 'Text' command type
$Command.Connection = $sqlConnection
$sqlConnection.Open()
$Result = $Command.ExecuteNonQuery()
$sqlConnection.Close()
if ($Result -gt 0) {return $TRUE} else {return $FALSE}
install ../DATABASE0980453.pkg
While($ProductionDistro -match $Cyc) {
write-host "Sets up location you want to run staging"
$ElementDistro = Read-Host -Prompt "Which Element do you want to run? (DATABASE1/DATABASE2/DATABASE3/DATABASE4/ALL)"
While($ElementDistro -notmatch "(DATABASE1|DATABASE2|DATABASE3|DATABASE4|ALL)") {
write-host "you have enterd an error" -ForgroundColor Red
write-host "You must type DATABASE1 or DATABASE2 or DATABASE3 or DATABASE4 or ALL"
write-host "you typed $ElementDistro"
write-host "set location you want to run staging"
$ElementDistro = Read-Host -Prompt "Which Element do you want to run? (DATABASE1/DATABASE2/DATABASE3/DATABASE4/ALL)"

OK, so you've got a reasonable input loop early on:
write-host "This script sets up DATABASE Staging"
$ProductionDistro = Read-Host -Prompt "Which production do you `enter code here`want to run?(TC/MonsterLock/Cyc)"
While($ProductionDistro -notmatch "^(TC|MonsterLock|Cyc)$"){
write-host "You have entered an error" -ForegroundColor Red
write-host "You must type TC or MonsterLock or Cyc"
write-host "you typed $ProductionDistro"
write-host "This script sets up DATABASE Staging"
$ProductionDistro = Read-Host -Prompt "Which production do you `enter code here`want to run?(TC/MonsterLock/Cyc)"
I've only added two things to that code: a ^ and $ at the beginning and end of your regex pattern. As originally written, it would have successfully matched any string containing TC, MonsterLock or Cyc (such as "bogusTCwhatever", etc).
Now, instead of a bunch of extra While loops based on $ProductionDistro, what you need is some conditionals (either a Switch statement, or some If/ElseIf). For example:
switch ($ProductionDistro)
'TC'
# Do TC Stuff
break
'MonsterLock'
# Do MonsterLock Stuff
break
'Cyc'
# Do Cyc stuff
break

Enter a true account assignment object with revenues while reversing FB08

Hi All
When I am reversing the document through FB08 I am getting the warning messege "Enter a true account assignment object with revenues"
Message no. KI166
Diagnosis
You made an account assignment for 31211100, a revenue element, in controlling area 1000 to a cost center or profit center.
System Response
Cost centers and profit centers can carry revenues in the SAP system as statistics only. To ensure reconciliation between FI and CO for revenue element 31211100, a CO account assignment object must record the revenues as a real value. This object type is used for updating to the reconciliation ledger.
In principle, it is possible for the SAP system to automatically derive this CO account assignment object, the reconciliation object. However, all postings made in CO for costing-based Profitability Analysis are logged in the reconciliation ledger under "reconciliation object". In this manner, the reconciliation ledger identifies the exact values flowing into the operating profit. If you post reconciliation objects during revenue postings to cost centers or profit centers, you must do so while keeping the interpretation of the reconciliation ledger reports in mind. The sums of revenue postings to profitability segments, cost centers, and profit centers cannot be broken down further.
Procedure
To avoid posting to reconciliation objects, make account assignments to a real CO account assignment object.
If you want to post to reconciliation objects, you can change this message to a warning or a note for future users, or deactivate the message entirely. Use the Implementation Guide under "Controlling: General" and choose Change message control. Enter area KI and message number 166. If you do not enter an individual user here, the change is valid for all users.
It is not allowing me to reverse the document already posted.
Please guide
Thanks in Advance
Sonal

Hi,
Do you have this cost element maintained in OKB9 with a reference to an internal order or profitability segment? If yes, please look at the note 373823.
Regards,
Eli

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri

I can no longer use the address bar to change websites. I can block text with the mouse and input a new URL but when I hit the enter key or left click on the right arrow it has no effect and the page does not change.

Also Ctrl+Enter no longer adds www+.com to words entered in the address bar. I can use bookmarks to change to other web sites or my password manager. Re-booting my laptop makes no difference. Please help.

Hey CaptRobyn,
Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. It might be related to an extension. Then you should read [[Troubleshooting extensions and themes]].
Hopefully this helps!

Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.

Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.

I think it has something to do with the way the value of the check box is exported, but I'm not sure. With nothing being exported to Data5, Data6 displays the sum of Data1-4 rounded down to the nearest whole number and updates automatically as Data1-4 are updated.
Right now, assuming Data1-4 are 0, where data 5 is the output of the second example and any box is checked, "1" is displayed in data5 but nothing is added to data 6. Selecting any other check box or deselecting that check box will cause data6 to add 1 even if data5 displays "0". By way of example:
Selecting Check box 16 results in Data5 displays 1 and Data6 displays zero.
Then, if any or all of Checkbox17-20 are selected, Data5 displays 1 and Data6 displays 1.
Then, if any or all of Checkbox17-20 are deselected, Data5 Displays 1 and Data6 displays1.
Then, if Checkbox16 is deselected, Data5 displays 0 and Data6 displays 1.

Can't enter numbers with shift (while entering a password), Can't enter numbers with shift (while entering a password)

Similar Messages

Maybe you are looking for