Can't enter password after 0s7 upgrade .

Before 0s7 upgrade, ipad password included Greek characters. Now start up keyboard screen has no 'world' button to access Greek characters so cannot enter password to start ipad. Any suggestions on how to restore/ find in settings? Thanks

I have the same problem, but as nobody else has replied to your post I am assuming that it is not very common. For me, it has only just started and after a bit of investigation I have found that this problem only arises when running my Powerbook G4 on mains power without the battery installed. Once the battery is fitted (still running on mains power) I can then enter the password as usual. I had been running the G4 without the battery since the latest battery recall.
When the problem arose I find that by clicking the mouse within the User Name field (at the end of my name) and then pressing the tab key, to move the cursor into the password field, allowed the password to be entered. Sometimes I had to do this several times before the key presses were accepted and the password could be entered.
Powerbook G4 Mac OS X (10.4.7)

Similar Messages

Can't enter password after sleep

When I put my powerbook to sleep by closing the lid while playing a game (eg Civ 3) and then wake it (open the lid/ press space) I can't enter a password in the password field as it doesn't accept any key presses (even after clicking on the field). I was going to telnet in but the machine goes back to sleep too quickly. Is this a known issue with a workaround (I don't want to turn off the password as I take it on the train and I have bank details on it).
Thanks in advance for any help.
Arron

I have the same problem, but as nobody else has replied to your post I am assuming that it is not very common. For me, it has only just started and after a bit of investigation I have found that this problem only arises when running my Powerbook G4 on mains power without the battery installed. Once the battery is fitted (still running on mains power) I can then enter the password as usual. I had been running the G4 without the battery since the latest battery recall.
When the problem arose I find that by clicking the mouse within the User Name field (at the end of my name) and then pressing the tab key, to move the cursor into the password field, allowed the password to be entered. Sometimes I had to do this several times before the key presses were accepted and the password could be entered.
Powerbook G4 Mac OS X (10.4.7)

I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. heeeeelp!

I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. what to do?

joycesalvador wrote:
... But I can't activate it after the upgrade. what to do?
See this discussion.
https://discussions.apple.com/message/21189708

Why can't I print after I upgrade to MAC OS 10.10 (Yosemite)?

Why can't I print after I upgrade to MAC OS 10.10 (Yosemite)?

You need a printer driver upgrade. Check with your printer's manufacturer to see if they have a new driver available. If not, then ask their tech support for additional help.
Meanwhile, open Print & Scan preferences, select the installed driver and click on the Delete [-] button. Then CTRL- or RIGHT-click in the list space and select Reset Print System from the context menu. Now, click on the Add [+] button to re-Add your printer. See it this helps. Be sure your printer is connected and turned on.

ORA-01017: invalid username/password; after Oracle Upgrade 9.2.06 to 10.2

Hi
I did an oracle Upgrade from Oracle Upgrade 9.2.06 to 10.2 as per SAP Documentation.
and after the upgrade was successful i changed the password of SAPABT (sapowner)
and now it is giving an error in work folder <b>dev_wo</b>
while connecting can any one help please ?
Tue Feb 06 18:55:20 2007
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPABT's password
C Connecting as /@ABT on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1   044FAB58   045000D4   044FF95C
C Attaching to DB Server ABT (con_hdl=0,svchp=044FF8A8,svrhp=04503F14)
C Starting user session (con_hdl=0,svchp=044FF8A8,srvhp=04503F14,usrhp=08C48D68)
C Now '/@ABT' is connected (con_hdl 0, nls_hdl 0).
C Got SAPABT's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=044FF8A8,usrhp=08C48D68)
C Now I'm disconnected from ORACLE
C Connecting as SAPABT/<pwd>@ABT on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1   044FAB58   045000D4   044FF95C
C Starting user session (con_hdl=0,svchp=044FF8A8,srvhp=04503F14,usrhp=08C48D68)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      4473]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11297]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#2 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#2 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1284]

SQL> connect / as sysdba
Connected.
SQL> SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
OWNER
OPS$CTSINTCOSNW5\ABTADM
SQL> SELECT OWNER, TABLE_OWNER, TABLE_NAME FROM DBA_SYNONYMS WHERE SYNONYM_NAME
= 'SAPUSER';
OWNER                          TABLE_OWNER
TABLE_NAME
OPS$CTSINTCOSNW5\SAPSERVICEABT OPS$CTSINTCOSNW5\ABTADM
SAPUSER
SQL>
Followed the note 400241      Problems with ops$ or sapr3 connect to Oracle
Problem got solved via the
Updating BR * Tools
brconnect -u / -c -f stats -t all -f collect -p 4 in Oracle Database Guide 4.3.6 BRCONNECT
Call BRTOOLS, Select Additional Functions --> Change password for database user.
in my case it is sapabt user
Thanks for the quick reply

Can't sync iPad after iOS upgrade to7.0.2 - repeated authorisation prompt - using admin profile, file SC info does not exist

Hello,
After I upgraded to iOS 7.0.2 I can't sync iPad mini with PC (on Windows XP). I keep getting the folowing message: "The iPad could not be synced because this computer is no longer authorized for purchase items on this iPad". I tried everything:
1) De-authorizing and rebooting (about 100 times);
2) De-installing and reinstalling itunes;
3) Deactivating the firewall;
4) Run Diagnostics (result - all works fine including sync);
5) Tried to look for the "SC info" directory or file everyone is referring to in the Computer (Hidden files) of the iTunes directory - nothing;
6) Ticking and unticking the |Sync over Wi-Fi" option;
7) Changing backup from iCloud to this Computer and back.
I am using the admin account on my PC - doesn't help.
I cannot sync anything at all.
BTW - on the PC and on the iPad - everything that is there plays OK. I can get stuff from iStore both from iPad and from the PC - but I can't sync the two.
It looks like an iOS 7 bug to me - any ideas or advice?
Thanks.
D.

No I have tried multiple connections, at home, at work, and even at my church but to no avail. For example I have recently purchased a CD from Itunes using my computer, but my ipad will only play it from the cloud. I've tried to download straight from my Ipad and that too does not work. When ever I try to plug the Ipad into the computer a window pops up and says that the sync has failed. If I try to drag the file to the Ipad it will say it's loading than just quit before it transfers. hmmm. I hope they get this bug fixed some. would really like to have that CD to isten to on the go. Another issue I am no having is the apps are having trouble updating. I have tried to turn off auto update and do it manually and that too is failing.

ITouch stuck in "iPod is Disabled" mode and I can not enter password, How do I correct this?

Hello and good day,
To who ever can assist me...
My little sister recently experienced the feeling of having her iTouch stolen from her @ school. Since the incident occured, two of her best friends located her iTouch and returned it back to my sister. When my sister attempted to turn the device on, she noticed that the screen that appeared showed her wallpaper, (which was a picture of herself) and the red box message at the top of the screen that indicated "iPod is Disabled"(below that statement states) "connect to iTunes"
So in seeing this message she connected the device to the family laptop. She proceed to open the iTunes program. Once the program was opened, she waited for the iTunes to read her iTouch. Once iTunes attempted to read the device the following error message appeared within iTunes stating:
"iTunes could not connect to the iPod "Delilah's iPod"because it is locked with a password. You must enteryour passcodeon the iPod before it can be used with iTunes."
With that error message coming up, the question then came to be, how do I enter my password if the Touch does not provide me that option to do so? The Touch is stuck in this "Disabled" mode and the screen that appears does not present option of entering password or anythihng for that matter.
With this issue, is there anyone out there that has experience this touble? Is there a solution, and if yes, could you please guide and advise us on what action to take? Unfortunatley, my sisters warrenty has expired. So i know that if the issue requires for us to take it in for repair that we may have to pay for the repairs services, but it would be worth it if I can see that there is or is not an answer for this problem.
Thank you very much for you time! =)
Sincerely,
Jefferson K. Tover
(big brother)

Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Can't enter password for 5 million minutes (malfunction)

I have an ipod touch I have had for over 2 years. One day it just pops up that I have to wait over 4 million minutes before I can even enter my password to open it. I realize that it is a security thing, but it is a malfunction in my ipod. Since Apple doesnt give a crap because their warranties are so short, they say that the only thing I can do is restore it, which will erase pictures along with tons of songs I have downloaded that I will have to repay for since you can only download once. The computer it is backed up on is 2000 miles away. I know what my password is... Is there a way to get this bypassed so that I can enter my password before waiting 5 million minutes to use it again?

Welcome to the discussions,
according to this article, the only thing you could try is this:
If you restore on a different computer that was never synced to the iPhone or iPod touch, you will be able to unlock the device for use and remove the passcode but your data will not be present.
copied from: http://support.apple.com/kb/HT1212

IPhone Crashed-Says Restore Needed-Can't Enter Password to Restore!

Earlier today while using my iPhone with Telenav, it suddenly just quit working! It felt hot and wouldn't come back on for a few mins. When it did come back on, it said Restore needed. However, when I connect iPhone to computer, iTunes cannot connect because of password!!! iPhone will NOT allow me to enter password! Shows iTunes or iPod Screen on phone and will only allow me to make emergency call! This phone is my life!!! My whole life is INSIDE this one! Calendar, numbers, documents etc!!!! I feel lost! How can I restore when I cannot enter password to connect?? HELP PLEASE!! It is the first of the 3GS phones and have NEVER had a minutes problem until now and it is nearl 4 years old I think! Has 32GB.

Thanks - I tried that just now. Didn't work. The passcode prevents the phone from being accessed. I have no idea what the guy used when he did it before but it was like magic.. there was a green button, he clicked it, the password screen went away and the iPhone home screen just popped up like nothing - I wish I could figure this out. If this program could override the password it would be absolutely perfect. Any other suggestions?

Parallels Desktop 9 can't be opened after EFI upgrade 2.9

I just upgraded my EFI firmware for 2.9 edition. But after done this, the Parallels Desktop 9.0 can't be started with an warning of Unable to load the Parallels driver. It seems that the virtualization support is disabled on my Mac.But I have done with upgrade. And another odd thing is the upgrade notice is always on App Store software bar even if I have installed it for several times. Who can help me?

After you have the problem with PB, open the Console app and look for log entries associated with PB at the the time you tried and post the results here.

Why my iphoto can't import photo after i upgrade new solfwere

can you tell me How i can import photo into iphoto because after i upgraded my new solfwear .... its not working

The same as before the upgrade
If you are having problems we need to know what versions of iPhoto and the OS you have, exactly what you are doing, what happens, what doesn't, what error messages you get, what has recently changed and any thing else that might help
LN

IPad apps can't access photos after iOS8 upgrade

I've got a number of apps on my iPad that used to be able to access the photos in my iPad Photos app but no longer can access them. I checked under Privacy > Photos that they are enabled and I went to General > Restrictions and made sure all restrictions are off. I changed nothing after the upgrade and all the apps could access photos before the upgrade.

Hold down ⌥ and ⌘ whilst launching photos and try repairing the library.

Iphone is disabled and old will allow emergency phone calls, how can I enter password

iphone is disables and will only allow emergency phone calls, how can I enter a password to unlock it?

Just restore it by putting the phone into DFU mode. You will loose every thing but it will be back to normal pal
Press and hold power and home button together for 10 seconds by connecting it to cable, leave the power button but keep holding the home button for 30 seconds and it will go into DFU mode. Open Itunes and just perform a restore or update

Can I delete CS4 after CS5 upgrade?

Can I delete CS4 after I installed the CS5 upgrade, or will that have a negative effect?
Thanks

If you don't want to keep the older version:
uninstall the older version first, BEFORE installing the new version.
The Adobe Uninstallers have a nasty habit of messing with essential support files of the new version because they mistake them for the older versions. When that happens, you have to jump through hoops just to uninstall the damaged version, as not even the Uninstaller will work on it. (You would need something called the CS3Clean Script, CS4Clean Script aor CS5Clean. Avoid having to go there. Honest.)
All Adobe upgrades are FULL INSTALLERS. The Upgrade installer will simply ask you for the old serial numbers when it doesn't find an older qualifying version installed.
Once more:
Do NOT uninstall an older version after upgrading to a new one; do it BEFORE.
Foretold is forewarned.
Wo Tai Lao Le
我太老了

Can't enter password?

Okay, so my password is one of the accents. To enter it, you hold down a letter and the letters with accents pop up. I know, stupid idea, but no one ever guesses it. Yesterday, my friend disabled it for a joke, and so I waited for it to recover the full minute, and now I can't enter my password. I kept trying and now I've just stopped because the last time it disabled it was for an hour. How do I fix this? Now I can"t even access my alarm clock or anything. It's the iPod 5.

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Can't enter password after 0s7 upgrade .

Similar Messages

Maybe you are looking for