Can't establish internet connection with Ethernet/Thunderbolt adapter.

Hello,
Ever since I update to OS X Mavericks, I can not connect to the internet on my iMac Pro Retina 15-inch.  I had to purchase the Ethernet to Thunderbolt adapter because the iMac pro Retina does not come with an Ethernet connection port.  When I first purchased the Laptop, I connected to the internet automatically.  However, now I keeps getting a message that the cable is not plugged in.  I did hook the Ethernet cable to a Windows laptop and it connected right a way.  So I'm positive it's the cable from router to computer is working.  Also, the Thunderbolt port is active because I plugged a external HD into it and it mounted.  The ability not to hook up to the internet is baffling.  I have a Motorola cable modem, connected to Linksys router.  I have two computers and one printer plugged into the router.  That leaves me one Ethernet Port.  When I hook up my iMac Pro Laptop using the Ethernet to Thunderbolt adapter, nothing happens.  I'm not connecting to internet.
Any ideas, will be greatly appreciated.
Dennis

Thanks everyone for your help and comments!
However, I still had to call tech support to solve the issue so I wanted to get back to everyone with the solution.
First, it had nothing to do with Mavericks!  Basically, it was a case of IP addresses being assigned by my modem and router.  We first re-booted the modem and router and got the macbook pro to finally recognized an etherport connection.  However, it wouldn't assign the IP address to the etherport, that's because I didn't click the apply button.  Once I did that, the macbook pro was working on ethernet, but I lost WI-FI on the macbook.  Ugh!  Also, my iMac desktop lost ethernet port and stop working.  So, I used the network assist me on the desktop and got to the point where it wanted me to reset everything again.  So, I unplugged the modem and router, waited 45 secs, then powered up the modem and then powered up the router.  Everything is work Great.  The desktop, macbook pro (both ethernet and wi-fi), my wife's PC Laptop and our network printer!  Therefore, the solution in my case was to restart modem and router twice to get all the computers assigned the correct IP address.  I hope this helps someone out there!
Thanks again everyone for your comments ... very much appreciated!
Dennis

Similar Messages

  • Can't establish internet connection with NAT network in Oracle virtualbox

    Hi all,
    I am new to Oracle virtualbox. I have created a new virtual machine with Oracle linux 5.5 (64bit). I have enabled the NAT networking adaptor so as to access internet connection from the VM. But I am not able to do so.
    Here are the network settings in the VM
    1. Automatically obtain IP address settings with DHCP
    2. Firewalls are disabled.
    The 'eth0' device shows active status. The #ifconfig command lists "inet address" as 10.0.2.15.
    Please let me know if any additional configuration is required for establishing the internet connection in the VM.

    The NAT engine of Virtualbox automatically provides a router between the network interface of your host system and the virtual network interface of your guest OS and offers the same DNS servers to the guest that are configured on the host.
    For more information how it works, see http://www.virtualbox.org/manual/ch06.html#network_nat.
    The problem you are experiencing is most likely with the network configuration of your host system.

  • Can't establish internet connection with Time Capsule

    I currently have a wireless Linksys router and have switch over to TC.  I've connected my cable modem internet connection to the internet connection of the Time Capsule, however, with the Airport Utility it states that I do not have a valid IP Address.  I've check under the Manual setting for Internet and ensured that the connection says "share a public IP address", but that does not work.  Any ideas?

    Did you remember to completely reset your cable modem and power cycle the network?
    Push the reset button on the modem (if present)
    Power the modem down
    Pull the batttery (if easily accessible)
    Power down every device on the network....order is not important
    Wait at least 15-20 minutes
    Make sure that you have the Ethernet cable from the modem connected to the WAN port (world icon) on the Time Capsule, and re-install the battery if it was pulled in the steps above
    Power up the modem and let it run for 4-5 minutes by itself
    Power up the Time Capsule the same way
    Continue powering up devices one at a time about a minute apart until the network is powered back up
    Check network operation

  • I cannot open my Yahoo Mail but everything else is OK.  When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page.  Safari can not establish secure connection with Yahoo Mail.

    I cannot open my Yahoo Mail but everything else is OK.  When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page.  Safari can not establish secure connection with Yahoo Mail.

    It sounds as though a script on the site, or an advertisement, is not working quite right...
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies using either of these. Save any pending work first.
    While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • Firefox says it can't establish a connection with any website I try I uninstalled and reinstalled it and get the same message

    firefox says it can't establish a connection with any website I try. I uninstalled and reinstalled it and get the same message .tryed running it with the addons diabled that didn't work. so I uninstalled it again this time uninstalling all the settings and addons too. reinstalled it and got the same message.

    See:
    * http://kb.mozillazine.org/Error_loading_websites

  • How can I establish bluetooth connection with my iPhone so I can share and modify my iPhone's contact list on my macbook?

    How can I establish bluetooth connection with my iPhone so I can share and modify my iPhone's contact list on my macbook?

    The Mac and iPhone sync with iTunes though the charge cable that is included with the iPhone. Through this, you can sync your calendars and contacts.
    Bluetooth is an impractical sync scheme as the time it would take to say transfer your song catalog could be longer than your phone contract. I suppose it is entirely possible to implement with hacks and jailbreaking, but I am fairly sure it is beyond the rules here to discuss such activities.
    You may wan tto ask this same question in the iPhone section of the comminitie here. There may be some workarounds for just contacts.

  • My MBP recently started logging itself out.  I narrowed the problem to the external monitor which is connected with a Thunderbolt adapter. When I disconnected it, the problem went away.

    My early 2011 MBP laptop (OS Yosemite 10.2.2) recently started logging itself out.  I narrowed the problem to the external monitor which is connected with a Thunderbolt adapter. I installed Thunderbolt firmware update 1.2, that did not correct the problem. When I disconnect the external monitor, the problem went away. Is there something I can do to be able to use the external monitor again?

    Try Function F1

  • Can not establish a connection with SQL

    hey all,
    i was trying to start with JDBC ,but i spent two days trying to establish a connection with SQL.
    can anybody help me please, the problem is about the url string and driver name.
    am completely lost with these stuff :(
    thnx in advance,

    stillAbeginner wrote:
    am using Microsoft SQL server 2005, but i don`t know how to get or setup driver correctly.
    please explain how.
    Are you specifically using "localhost" as the server name and thus the database is on your client box? If not then SQL Server must be configured to accept such traffic before it will work.
    Other than that the most common problems are
    1. The port is wrong. It is either 1433 or 1434.
    2. The server name(or IP) is not visible from client computer. Nothing you do in java nor MS SQL Server will fix this.
    Printing the stack trace and posting it here provides more information for us to help.

  • Can't share internet connection with iPad since installing Time Capsule

    Until today, I've used Earthlink's DSL service with a Netopia DSL modem with an ethernet connection to my iMac through a Linksys WRT54G router. My iPads (1 & 2) have been able to simultaneously share the internet connection over wifi.
    Today, I installed a Time Capsule and removed the old Linksys router. I'm still using Earthlink's DSL service with the same Netopia DSL modem, and I still have an ethernet connection to my iMac, but through the Time Capsule now. I can get online from the iMac without problems.
    But my iPad can no longer connect as they did previously. When I try to visit a website using Safari on the iPad, I get the message, "The Internet connection s currently in use by another computer. Enter your DSL Account logon password to switch the Internet connection to this computer." If I enter the DSL account password on the iPad, I can get online, but then the iMac is knocked offline.
    How can I go back to sharing the connection so that any of the devices can get online at the same time?

    I found another thread right after I posted and seem to have solved the problem following the steps described there (plus a couple more).
    https://discussions.apple.com/message/15758093#15758093

  • IPhone 3GS can't share internet connection with a windows 7 64 bit version?

    I have an iPhone 3GS with the latest iOS installed, then the personal hotspot option is ON and it shares internet connection to a laptop with Windows 7, 32 bit version and with the latest version of itunes installled (10.6.1.7).
    But when I connect this same iPhone to another laptop with Windows 7, 64 bit version with the latest version of itunes 64 bit, there is no internet sharing, no error, no signal of fails, it is just as if the hotspot option were OFF.
    Its is posible to share internet from iPhone 3GS to a PC with Windows 7, 64 bit version?

    Hey there @slee , welcome back
    I would suggest trying the steps in this guide for the installation troubles you are having on your one specific Windows 7 computer.
    Windows 7: The Progress Bar on the Software Installation Stops or Stalls
    You can also try disabling your firewall while you run the installation to see if that helps.
    Let me know the results!
    Have a great Thursday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How can I get internet connectivity with my iPod Touch cabled to my PC?

    Most devices "tether" to a computer (PC or iMac) for internet connection. I cannot find any reference in the user manual on getting internet access from the connected PC to the "tethered" ipod touch. How can I accomplish this?

    Hi,
    The iPhone 3G and iPhone 3GS support Internet tethering over a USB cable, as described here: http://support.apple.com/kb/HT3574.
    The iPod touch can connect over a Wi-Fi network, as mentioned here: http://support.apple.com/kb/HT2031.
    If your PC has a wireless card, you may be able to create an Ad-Hoc Wi-Fi network that can share the Internet access to the iPod touch.
    You can also get a wireless router, like an Airport base station http://www.apple.com/wifi/.
    -Jason

  • Problem connecting my macbook pro to a wired internet connection via ethernet cable adapter

    I am having a problem connecting my macbook to a wired internet connection in an area in my workplace where there is no wifi.  The macbook works fine on the same internet connection via wifi in other parts but when I add it as a wired connection it doesn't show any connection.  I have turned off wifi to make sure that it is not trying to pick up a poor connection but I still can't get this to work.  I think I am trying to set up the connection properly but can't be completely sure.  Any help would be appreciated.

    Open System Preferences>Network and make sure Ethernet is selected. If it is, open Advanced Settings (at the bottom of the Network window). Click on the TCP/IP tab. Configure IPv4 should be set to "Using  DHCP".
    Configure IPv6 should be set to "Automatically". When those are set click the "Renew DHCP Lease" button

  • Can't get internet connection via ethernet

    I have had 3 computers, 1 pc and 2 Macs, networked through ethernet for two years. Never had problems until yesterday. We just can't get on the internet on the Macs. Both macs say "Your computer isn't connected." Talked to D-Link router, everything was fine. Macs recognize IP and all numbers, so they told us to call Apple. Any ideas?
    Thanks.

    Possibly:
    reboot the macs.
    check the cables.
    reboot the router.
    reboot the dsl/cable/whatever modem.
    Are you getting a valid Ip ddress from the D-Link (192.168.xx.xx, or is it a 169.xxx.xxx.xxx?)
    In Network utilities, can you ping an outside IP by name? Ping an outside site by IP by number? Ping the router IP? Ping the PC?
    Reset Safari...

  • Can't establish infrared connection with 6101 and ...

    As I've recently upgraded my phone I want to store my pictures from the 6101 I am replacing. Eventually, PCSuite will complete the connection setup, but when I go to Store Images and click Select Phone it either doens't list the phone or, if it does, I select it but the ok is not activated so can't proceed - evenutally the phone disappears from the list and I start over... I've also tried copying files and backing up, but the connection always goes. Please help! I've been trying to do this for days! Really don't want to lose my images (pic's of kids, you know).
    Thanks.
    Berta

    Have you tried the file manager in PC Suite ?
    Connect the phone and see it the phone is visible in File Manager ? When you can browse to the right folder (Gallery - Images or memory card depending where you have the images and manuallly move them to PC folder ?

  • Can I establish WLAN connection with Satellite A20?

    Just bought a new desktop pc and philips ADSL wireless base station. Software running OK on both desktop and laptop but can not logon from laptop without cable being attached. Does anyone know if the A20 should do and if so how to fix / setup?
    And if it doesn't, what do I need to make it so it does? I can not see the WLAN in network or device manager. Got Wireless hotkey in add / remove programs though. (What's this?) Can'e see it in programs list though??
    Help me! Please!!
    Ta. Andy.

    It is not easy to give any precise answer because you have not written which notebook model you have exactly. Anyway I have found follow information:
    Satellite A20-S103 is WLAN ready
    Satellite A20-S103D is also WLAN ready
    To be sure about WLAN card please check at first bottom side. Every notebook with WLAN card on board (factory configured) has small WLAN sticker. Please check also entries in device manager under Networks adapters. If the WLAN card is not listed there you must buy one.
    You can use one compatible card and put it on the right place or use some external solution like USB or PCMCIA WLAN card.

Maybe you are looking for

  • Capture Browse Event in BSP application

    Hi guys, i have a BSP page which contains a browse button and a drop downlist. my requirement is to enable a button only when the value is selected from the dropdown list and the text field of the browse event is filled. the problem is that am able t

  • X icon is displayed in PDF form area.

    Hi all,        i am wokring with some application which displays PDF in browser but  X iconed symbol is only displayed in the PDF form area. PDF configuration are done. but don't know what is missing here. Please can any one give some suggestions to

  • Web Service using SSL

    Using Coldfusion 8, I am trying to connect to a .NET web service that is secure with SSL v3. I have added their cert to my CF keystore but still getting the same error. I am able to connect to the webservice, but not execute any methods. I can access

  • Bug in which Premiere does not allow publishing of videos to YouTube over 15 minutes.

    When I try to publish a video to YouTube over 15 minutes I get this error: "The video duration exceeds the maximum duration supported by the destination.  Please reduce the duration of video and try again."  Clearly YouTube's policies change over tim

  • Console Log Error: org.ntp.ntpd

    Checking my Console Error Logs I came across this listed. *12/19/2007 1:42:58 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight* I did some checking and found that this has to do with the Date & Time preferences... Every time I