Can't even boot Phone... Freezing... HELP?!?!?!?!

So my phone has been freezing , and i assumed it was because of the recent update. As it only started happening after update. Now ive tryed booting my phone up over 15x+ and it just freezes on droid on load up screen. What can i do?!?!?!?! I even tryed the clear cach from boot screens and a few other things. Blah.... HELP!!!
<3 The Kikster

I went down to vw store..Its fried. Sending me out another phone today, should be delivered soon... but ill loose all my photos! Any ideas on how to grab them through a pc or such? It for some reason didnt save it to my memo card, and i dont think it used back up assistants except for my contacts. I just came back from a trip from maine .. and most of my vacation photos were done on my phone!!
Gahhh HELP!

Similar Messages

I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help

I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help!!

micron12
Hi I had a simular problem with my iPhone 4 and iPad 3 and found that the USB connection on the computer was at fault so I moved the connection to a USB port on the Mother board.This curred my problem,see if ti works for you.
Windows 7 and windows XP

HT201210 my iphone has the USB connector icon on the screen & I can't use my phone. Help?

I triued installing the itunes update on my iphone & now it has the USB connector icon on the screen & I can't use my phone. Help?

Can you please explain what happend and tell us exactly what you were doing before the mishap occured? Your ambigous post will not help us help you.

HT4623 Hi,This morning I had software updated my iPhone 4s and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me

Hi,This morning I had software updated my iPhone 4s and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

My iphone can't load facebook "news feed" when connect wifi but when connect 3G it load normal . can't connect all phone . pleas help me

My iphone can't load facebook "news feed" when connect wifi but when connect 3G it load normal . can't connect all phone . pleas help me

Hi, Shadiamond Murray.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection. The second article cover the recommended settings for current Wi-Fi access points.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

I tried to restore my phone this morning, but the phone is stuck on the screen showing I'm plugged into itunes. I have no service, and although my device registers in itunes, the right side of the screen is blank. I can't use my phone. Help!

I tried to restore my I Phone today but now its not working. The screen is stuck with the plug in picture, and only allows me to make emergency calls. It says I have no service and I can't use my phone.
Why does the device show in the left hand side of I tunes, but the right hand side is blank and shows no options?

Walter...seems to be a multiplying problem. My problem appears to be the same:
(Original iPhone Restore...HELP !!!
I was having syncing issues with my iPhone (an original) and ultimately took the step to restore the factory default settings in an attempt to start over from fresh...iTunes 'sees' the iPhone device and seems to go through all the requisite restore, load, verify steps, but I can't get the iPhone to load the main menu. I continue to get a window that shows a USB Cable pointing to iTunes...I have had 800 call support technicians and genius bar techs look at the problem without result.
Anybody run into this problem or have any ideas how to resolve? Thanks in advance for any assistance you might offer! regards, mdh)
That was a post I put in LinkedIn hoping to find someone with a similar experience and perhaps a solution. Had intended to post here...then saw your post of what appears to be the same issue.
HEEEEEEEEEEEELP! I want my iPhone back (please)

*MAJOR* System Failure after Javascript Upd. Can't even Reinstall OS. Help!

I updated my javascript to my white iMac 2.16 Intel Duo (24"), and suddenly I could no longer log into the account (an admin account) that I was signed into when I upgraded. I could signed into the others (1 admin, 1 non-admin). For the 1 account, I would sign in, it would go blue, and then cycle back to the sign-in screen. It was very similar to the Apple post regarding this, except Apple said this was ONLY for the aluminum iMacs. This one is a white 2006 2.16 Intel Duo model.
So, I then I tried to repair permissions. That just about failed (got "stuck") at "47 minutes to go".
So, I started up the iMac off of TechTool5 CD. Repaired permissions that way (a LOT were wrong). I ran the suite of tests, and it said my Directories were seriously messed up. Trying to repair the directories would have caused a loss of 75% of my files, so I canceled it.
A few weeks ago, I bought a new iMac, gave this now-dead one to my wife, had wiped it clean, installed OS 10.5.8 and did an account transfer. I still have her oldr machine to transfer the accounts again, BUT I CAN'T EVEN ERASE THE HARD DRIVE TO CONTINUE! (Read on)
I tried booting into Safe Mode. Didn't work. It cycled from gray/Apple logo screen to blue to black to gray/apple screen ad nauseam until it just shut down. Now I can't even get it to boot up (remember, some accounts used to still work ... now it won't even boot) passed this cycle of gray/Apple logo screen and black until it shuts down. I wanted to just erase and start again, but I cannot. The iMac WILL boot from a TechTool 5 CD, but will NOT boot from An Apple OS Install CD or even an Apple Care CD
I tried to access the iMac's drive via Target Disk mode and my PowerBook 17" (10.4), but while the iMac went into target disk mode, the laptop would not see it.
I went back to the TechTools CD start-up, and decided to repair the Directory ANYWAY, just to get in and then erase the HD. NOW, I cannot even do that. Repair the Directories is grayed out in the TechTool's window!! (It just keeps getting worse!)
I am at a complete loss on what to do now. I have used Macs since 1990 and have never had something like this.
Any suggestions? Even just to wipe the hard drive clean and resinstall ??

OK, I was FINALLY able to get into iMac using the OS DVD that came with the computer. Unfortunately, the darned DVD says that 10.5 cannot be installed on the iMac because 10.4 is not already installed. What?? This is the only DVD that came with it! The iMac came with 10.4 installed, and a 10.5 disk in the box. It did not come with 10.4. What the ****, Apple? How am I supposed to install 10.4 if you never gave it to me?
So, I used Disk Utilities to erase the HD. I put it in Target disk mode, and tried to use older OS discs to install using my laptop or other iMac via Firewire. But the other computers now do not even SEE the iMac as a external disk. It doesn't even show up on the list. OR, in case of the laptop, it showed up, but the installation hangs right at "checking destination" (or something like that). The progress bar does not even move... for over an hour.

Can't even boot with 4gb, 975x Plat PowerUP, XP Pro 3d bit

Hey all, I've had a Core 2 Duo e6600 running on a 975x Platinum PowerUP edition since august now with 2 GB of memory. I recently added an additional 2GB.
I understand that I may never actually see all 4gb of memory in Windows as I only have Windows XP Pro 32 bit, but it my OS won't even boot with the other 2 sticks in there (4gb). I get a BSOD on the loading screen. The BIOS detects all 4gb correctly. I have tried the /PAE switch and /noexecute=optin swith and neither work. I've even tried disabling PAE and putting /noexecute=alwaysoff in there and I still can't boot (you'd think that I'd be able to at least get it to boot with 3.25 or whatever GB showing up, right?). I have the current official 7.40 BIOS. Does anyone have any advice for me?
Summary: 4GB recognized by bios, Win XP Pro 32 bit won't boot BOTH with or without /PAE and /noexecute=optin(or AlwaysOff).
Conroe E6600 and 975x Plat PUP bios v 7.40
THANKS!

Run memtest with all 4 dimms installed - Since it's valueram there's a chanse those sticks are not identical. They just use the cheapest chips they can find at the time to produce valueram, so even if you buy valueram from the same make and type, but at a diffirent time, they might still use diffirent chips ...
Non-identical RAM can cause errors in a dual channel enviroment (wich your core2 is)...
Core2 64 bit performance is where it should be. Just as fast as 32 bit for normal applications and loads faster for applications wich put the extra cpu registers to use...

Hello I am really struggling with iCloud. I have changed my Apple ID but when I go into iCloud it has my old id and won't let me press it to change it and will only let me change password so I can't even delete iCloud pleas help

I Can't even delete the account as it keeps asking for the password for the account I don't have anymore! It's really frustrating!

Apple ID: Changing your Apple ID

HT4623 I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help

I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help

Connect the iPhone to the compter you usually sync with
and use iTunes on that computer to do the restore.

I connected to my hotspot on my phone but it took two tries, the first didn't work. The message saying it didn't work won't go away and i can't even shut down. Help

I tried connecting to my phones hotspot and the first time it didn't connect. I tried again and it worked fine but the message saying it didn't work was still there. After a day it is still there and my computer even died and when it charged again the message was still there. My computer won't allow me to shut down or restart because i can't close the system preferences. What do I do?

Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the device restarts, so you should be able to use it

Can only boot into Windows 7. Can't even boot from Snow Leopard DVD.

I have no idea what prompted this. I don't recall installing any OS updates recently, other than some Windows Live apps in Windows 7.
I have an early 2009 Mac Mini with Snow Leopard, and have Windows 7 64-bit installed in a Boot Camp partition. When I installed Windows 7, I couldn't get the Boot Camp utility to install within Windows (I guess because it's 64-bit) so to switch back and forth between OSes, I just shut down the Mac and restart it with the Option key pressed, and select Mac OS X when I want to return to Mac. This has worked for about a month and a half now (ever since I got Windows 7). Suddenly I have problems.
I first had problems booting into Windows or Mac. I got to the grey screen with the Apple logo, with that spinning "progress" thing going for a while, then it would freeze up and get stuck on the grey screen with the Apple logo. I zapped the PRAM. No help. Then, after disconnecting all external drives (I have several) and extra USB devices, I was able to boot from the DVD install disk and reinstall Snow Leopard on my internal drive. Joy, or so I thought. Then I booted into Windows 7, and after some weirdness getting it to start, it did successfully start and ran just peachy.
Then I turned off the Mac and held down the option key (as usual) to return to Mac OS. But now all that happens is that I get a grey screen for a few seconds, then the Mac boots back into Windows 7, which seems to work fine. (I'm in Windows 7 right now.) I turned on one my external drives (Snow Leopard installed, connected via Firewire 800) in hopes that the Mac would boot into that, but same thing. Ignored and back to Windows 7.
Then I thought I'd boot from the install DVD again by putting it in the drive and holding down the C key as I restart, but the same thing--a grey screen for a few seconds, and then booting right into Windows 7. I can't seem to escape Windows 7! It's a bit disturbing when it won't even recognize the install DVD.
I tried to call Apple Care since I'm within my 90 day support window, but of course they are closed. I'm figuring that I'm going to have to take this into an Apple Store, but thought I'd see if anyone has any ideas. Any advice will be appreciated. Thanks.

According to Apple, Win 7 64bit is supported with Bootcamp 3.0. If bootcamp 3.0 is available; I could not find it anywhere on Apple's website. It appears the most recent version is 2.2. The only place I could find 3.0 is not on Apples website and it's a questionable source so I won't post it here.
It may just be a matter of time before Apple makes it available. I'm not suggesting you wait, however if the install disk can't be used, I'm not too sure where u could go from there. Calling Applecare might work.
If you do a simple google search using the terms 'download bootcamp drivers windows 7' u will see what I was referring too.
Here's what I found from Apple (It doesn't specifically mention 64bit however just win7): http://support.apple.com/kb/HT3920
This is not from Apple, but specifically addresses whether they support win7 64bit: http://www.macnn.com/articles/09/08/31/boot.camp.win.7.64.support/
Here is more info about bootcamp 3.0 and win7: http://www.apple.com/support/bootcamp/

I lost all my apps on iPad 2 and I can't even restore it. Help?

Hello,
Few days ago I was downloading an application but for some reason it kept freezing, so I thought I might just turn it off and on again. Once I turned it on again, ALL my apps were swiped clean... even the default apps like Settings or App Store were nowhere to be found ! I tried doing the search thing on the right on web or wikipedia, but it kept giving me errors. I finally tried restoring it with my laptop but it kept giving me an error.. I tried all the solutions they suggested from the help page.. and still NOTHING! I dont know what else I can do! Please help?
P.S: My photos are still on it, I could locate them from the drive when I plugged it to my laptop.

Hello,
Few days ago I was downloading an application but for some reason it kept freezing, so I thought I might just turn it off and on again. Once I turned it on again, ALL my apps were swiped clean... even the default apps like Settings or App Store were nowhere to be found ! I tried doing the search thing on the right on web or wikipedia, but it kept giving me errors. I finally tried restoring it with my laptop but it kept giving me an error.. I tried all the solutions they suggested from the help page.. and still NOTHING! I dont know what else I can do! Please help?
P.S: My photos are still on it, I could locate them from the drive when I plugged it to my laptop.

My phone freezes//HELP

I HAVE A CURVE 3g,,, HAD IT JUST OVER A YEAR SO now out of warranty,,,
so fustrated as my phoe keeps freezing...the keys will work but im unable to use the track pad.
it will freesze for 5 min to the whole day,,,
i was told to take battery out and reinsert after a few minutes,,, this no longer works,,,
ive plugged it to my laptop to update my software but no updates available...
ANY OTHER SUGGESTIONS.
CURRENTLY FEELING VERY LET DOWN BY MY BLACKBERRY AND ORANGE WHO SAY THEY WILL DO NOTHING.

Hello amydw2116
Welcome to the Community
I understand how it feels to have a freezing phone. If the 9300 is on OS6, it may have been lacking memory that's why it freezes. You can delete some applications that you don't use. If there are no updates available, reloading the same OS clean can also do the job for you. Pleasecheck the Article below.
How to perform a clean reload of the BlackBerry Device Software for Windows
Goodluck and please let us know if it helps.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

After resizing a disc partition using disk utilities, I can no longer boot windows. HELP! what is the best thing that I can do to fix this

Bare with me as Im no computer genius but ... This afternoon I wanted to create more disc space on my Windows partition as I am using CAD software and wanted to free up as much space as possible. So, I went into disk utility and reduced the size of the Mac partition, then clicked apply.
When I came to reboot the computer to use windows the windows OS, the option to use windows was no longer there.
After looking at some online forums, I've found that most people suggest reformatting the hard drive and re-installing mac OS and also windows from back up data.
Is there no easier way for which I will not lose any data? Please help! I really need to use Windows ASAP!

The only apps I know of that can backup a Windows partition and or resize a windows parttition on a Mac so you don't have to go through the wipeing out, resizing and reinstall is WinClone for backing it up and WinTune (I think that is the name) for resizing a Windows partition on a Mac.
Once you create a Windows partition, install Windows in that partition, you can't fool around with any partition on your drive with either Windows Disk Management or OS X Disk Utility and expect Windows to boot.
The only thing you can try is to run Boot Camp Assistant.app again and remove the Windows partition and then run it again to create a larger partition and then reinstall Windows. Once you remove the windows partition put all the space back into the OS X partition and start fresh.

Can't even boot Phone... Freezing... HELP?!?!?!?!

Similar Messages

Maybe you are looking for