Can't Even Open After Upgrading to iTunes 7.6!

I upgraded two days ago to 7.6 (which, on a side note, when looking about "About iTunes" it still listed it as 7.5) and all of the sudden today it says "The file "iTunes Library" cannot be read because it was created with a newer version of iTunes." What happened? Has anybody else had this problem? After clicking "OK" it just closes and I can't use iTunes.
Wow, thanks Apple!

Okay! Thanks! Followed the link to that threat and figured out the problem. I had moved iTunes to a sub-folder in Applications (for grouping together as a stack in the dock, something stacks should have been able to do anyway) and when it installed the new version it didn't check where the old one was, it just dropped the new one in Applications.
Everyone else who has this problem double check and make sure you don't have two different versions of iTunes: one in the applications folder and another that your dock shortcut directs to.

Similar Messages

ITunes wont open after upgrade to iTunes 9

I upgraded to iTunes 9 unaware that apparently it doesn't work with 10.4.11 and now itunes won't even open, instead I get an "requires Quicktime 7.5.5 or later" message and when I click the OK button iTunes still doesn't open. I can't upgrade to QT 7.5.5, as far as I know it is for intel Macs only and apparently so is iTunes 9. I can uninstall iTunes 9 and reinstall itunes 8.2, but since I can't open iTunes and backup the music to a disc, I'm not sure if or how I would replace the music in the reinstalled iTunes, will the music folder be effected and if it is, can I simply copy the music folder to the desktop and then drag and drop it into the iTunes application folder after the reinstall? If not, what would be the best procedure?

Don't touch your iTunes Music folder. All your iTunes data is stored there completely separate from your iTunes application. You can delete or reinstall your iTunes Application without affecting your data. However, you should be able to use iTunes 9.
iTunes 9 requires OS X 10.4.11 or later and a Mac computer with an Intel, PowerPC G5 or G4 processor.
It also needs QuickTime 7.6 or later. You can download it here: http://www.apple.com/quicktime/download/
Note that there are separate versions for Leopard and Tiger. Pick the right one.

Can't share videos after upgrade to iTunes 7.2

I share videos wirelessly from my iMac to my MacBook Pro which is connected to my widescreen LCD in my living room.
Using Frontrow, after upgrading to 7.2, I now get the message: "This shared video cannot be played. The shared video server may be having problems playing video."
Shared photos and music still play fine.
I've rebooted everything including my Linksys router.
There was no problem playing my shared videos this way with iTunes 7.1
Anyone else having a similar problem, or can anyone offer a hint or solution?
thanks, Chuck

We are working getting a resolution to this issue as well.
http://discussions.apple.com/thread.jspa?threadID=980231
Joe

Finder.app Can't be Opened after upgrade

I just upgraded to Yosemite and my desktop will load for a few seconds before disappearing and Finder.app Can't Be Opened
2014 MacBook Air

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Can't sync ipod after upgrade of itunes!

When I upgraded to itunes 7, it took all of the songs off of my ipod, but they are still in my library. When I restored the ipod, I got a message that the library was not copied into my ipod "because you are not authorized to play them on this computer." Anybody have any idea how to fix this?

try playing one of the songs for a few seconds in iTunes. do you get asked to authorise? if so, and if you do, do the songs transfer the next time you sync?

App store can't be opened after upgrading to Mavericks

After I upgraded to Mavericks, the app store was still working but the next day, it can no longer be launched. Tried rebooting but it still does not work

I Reinstalled mavereicks and worked great for one day... now i am back to how it was... If only my time capsule worked.
Do we know if this a nown apple issue or is there some software conflicting with this?
I can´t reinstall every week...

Can't sync iPod after upgrading to iTunes 11

I had a Windows XP computer with an older version of iTunes which I synced (by cable) with my iPod Classic (version 2.0). The XP computer recently crashed and I bought a Windows 8.1 computer on which I installed iTunes 11, and authorized the new computer. I managed to restore my music to the new computer from backup, but now when I sync, newly purchased tracks are not transferred to the iPod. Also I can't seem to rip from CDs anymore, the "Import" window doesn't open when I put a music CD in the drive. The tracks in my playlist purchased from iTunes have a "cloud" icon next to them, which I believe means they haven't been redownloaded to my computer but are on the iCloud servers. I don't understand iTunes 11. Does iCloud stop devices from syncing by wire? I don't want iCloud or any new features, I just want my old functions to work! Help!

Okay! Thanks! Followed the link to that threat and figured out the problem. I had moved iTunes to a sub-folder in Applications (for grouping together as a stack in the dock, something stacks should have been able to do anyway) and when it installed the new version it didn't check where the old one was, it just dropped the new one in Applications.
Everyone else who has this problem double check and make sure you don't have two different versions of iTunes: one in the applications folder and another that your dock shortcut directs to.

After upgrading to itunes 7.3.1.3 I can't run the backup to dics anymore.

After upgradeing to itunes 7.3.1.3.1 I can not run the backup any more. Also the CD burning runs very slow.
The DVD burner run ok with other software.
After it checks for file to be backed up it kept ejecting the blank DVD and asking for a blank disc.
I have even replaced the DVD drive with drive from another computer.I also reinstalled ITUNES once-- It ran as a repair during the install.

I have used this same DVD Burner to backup my list from within iTunes before. I did this back in June just after I purchase 30 songs. I think I was running version 7.1 or 7.2 when the DVD backup worked. If not sopport then why does their diagnostics say DVD/CD Diagnostics. Even so I have the same problem on my other PC with a CD Burner. I think Apple support sound a little like Microsoft. I once had a problem with Windows NT and had to call MS support 5 times before they said their software had a defect and issued a patch.

I haven't synced my iphone 4 with my windows xp pc since Nov 2011. now I can't even open Itunes. I get a message that says :the feature you are trying to use is on a network resource tat is unavailable". I can't uninstall it either.

When I try to uninstall iTunes so that I can reinstall it, I receive this message: "The installation source for this product is not available. Verify that th esource exists and that you can access it".
I don't understand this as I'm the only one who has ever accessed it. I set it up when I got my iphone last fall, and haven't synced it since. Now I can't even open iTunes, nor can I update it, remove the program or reinstall it.
Any ideas out there? I'm not a computer whiz, so please keep it simple. Thanks.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again , it's really frustrating , any solution ??

After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?

Hello kumarsenthil210317
Check out the article below to start troubleshooting issues with touchscreen response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G.

After installing the latest IOS 5, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?pleas help.. thanksafter installing the latest IOS 5, my phone went off and all i can see now is an apple logo.i can´t even o

after installing the latest IOS 5 on my iphone 4, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?please help.. thanks

thanks a lot.. its ok now..

Error windows keep popping up on our laptop (Windows) it has to do with MobileMe. Trying to uninstall but not able to. Now can't even open itunes???

Error windows keep popping up on our laptop (Windows) it has to do with MobileMe. Trying to uninstall but not able to. Now can't even open itunes???

MobileMe should be uninstalled. See note 2 of Troubleshooting issues with iTunes for Windows updates.
tt2

Hollie**it! I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes twice today. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an

Hollie**it!
I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes Trice Now. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe. R6034 An application has made an

Hello there, Vinnie.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forc

My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forcing close again? does anyone have a solution to the above problem?

You mean the default OS X mail app? Try reinstalling OS X Yosemite if that's the case.
If you are referring to 3rd party mail applications, that's a compatibility issue. Some apps don't work in the new operating system. You have to wait until the developer updates the app, or you have to revert back to Mavericks to continue using it.

Can't Even Open After Upgrading to iTunes 7.6!

Similar Messages

Maybe you are looking for