Can't execute command - drive didn't come online; check configuration/hardw

I have a Scalar i500 on a Linux host attached via fiber channel. I have everything working accept automounting the drive. I can't seem to get it working.
I can use the web interface of the i500 and then put a tape in the drive. I can then mount the drive from Secure Backup and run a back up just fine. Yet, I can't run a backup without a tape mounted. If I choose "Load Volume (Drive).... I get the error "can't execute command - drive didn't come online; check configuration/hardware"
I can inventory the library and do just about anything except automount the drives. I run a verify and the configuration comes back clean with no errors. I have tried using the SCSI params in the obl0 and obt0 ,and obt2 with no success. I have tried using the raw /dev/sg paths with no success. Same error.
This is a upgraded installation from 10.1 to 10.3. I have tried doing a clean install with same issue. I have restored the installation and then run a upgrade with the same issue.
I am stuck. Please help :)
Thanks

It appears you may have the DTE's swapped.
Swap the DTE #'s assigned to the drive device objects and try again. This could happen during an upgrade if you reassigned scsi settings and the obt0 and obt1 devices swapped scsi settings from when they ran things last.

Similar Messages

  • Can I execute commands when my system switches to UPS battery or shutdown?

    Hi, I am trying to execute some custom commands when the power goes out and my mac is running on battery from an uninteruptible power supply (UPS).  I did some research and read that a script is executed when OS X shuts down when critera are met while its is running on battery from a UPS. UPS is supported by Mac OS because it shows up in the Energy Saver Preference plane.
    This script is:  /usr/libexec/upsshutdown
    I modified this script, but it looks like my custom commands are not executed.
    Does anyone know if mountain lion still executes this script?
    2012 Mac Mini Server
    CyberPower CP1000PFCLCD

    Okay. I think I know what the problem is. Here's the exact sequence I follow. I am thinking SQL Developer is not doing exactly what it should.
    a) File > New and then click okay
    b) The top dialog box shows the file name: Untitled2.sql
    c) I rename this to abcd and click okay
    d) SQL worksheet opens with the following filename "abcdsql" <- there's no dot between abcd and sql !
    e) I enter in "select * from dual"
    f) execute and it works fine
    g) I click save and it saves it as abcdsql <- NO extension
    Before I had not been looking carefully. I had seen the word "abcdsql" and thought it was "abcd.sql".
    Now my question is why does it append "sql" to the filename? I was in the box for naming a new sql file. It allowed me to type in a file name but then instead of adding "sql" as an extension it just appended this to the filename and didn't give it an extension.
    Anyone else tried this? It seems like a very non-standard thing to do. I never saw an application that just appended "sql" to the filename when it should have given the file a ".sql" extension.
    Richard

  • How can I execute command passwd in solaris with Java (ProcessBuilder)

    Hi all, my problem is that I want to change the user password in solaris 10, but from a Java programm, I was trying with ProcessBuilder but I don't know how insert the new password, Who can help me?

    I'm not sure, but I think passwd is one of those programs that only lets itself be run interactively from a terminal.

  • HT5559 Can't execute command number 4.

    sudo ln -sf /System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPlugin2_NPAPI .plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
    sudo ls -sf /System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPlugin2_NPAPI .plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
    ls: /Library/Internet Plug-Ins/JavaAppletPlugin.plugin: No such file or directory
    /System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPlugin2_NPAPI. plugin:
    total 0
    0 .                    0 ..                    0 Contents
    This How To doesn't work. Please help me with this.

    Please see
    http://java.sun.com/j2ee/1.4/docs/tutorial/information/faq.html#compile

  • I lost my phone, is there anything apple can do as far as making it come online?

    I just lost my phone about an hour ago, is there anything apple or my provider can do?

    The only way to track your device would be with "Find My iPhone" via www.icloud.com. (Of course this requires that your phone is on and has a wifi or cellular connection, and that you set up and enabled iCloud's "Find My iPhone" service) 

  • Execute commands on a remote server

    hello,
    1. how can i execute commands on a remote server using java (how to connect and how to execute) without having java on the remote server
    (i cannot connect with Socket object)
    2. how can i execute commands on the local computer
    please help me

    Well, for #1, if you can possibly know what commands you'd have to call you could set a perl script up on the remote machine to perform that command and return to you the results. problem is, you'll have to have a web server of some sort to do this (as far as i know).
    I know it's not a very good solution, but it's helped me plenty of times where i couldnt install Jakarta or the likes on a server and couldnt connect to it using sockets.
    Justin

  • Ix4-300 fan keeps running full blast and the NAS never comes online

    When I turn on the ix4-300 after a couple of seconds its fan starts running full blast but the NAS never comes online.  The NAS lcd was damaged in the move so I don't know what is going on, it was working fine for a couple of weeks (with the damaged lcd) but this started happening a few days ago.  Things that I've tried:
    Used the other ix4-300 (I've 2) with the faulty NAS... same result
    Let the NAS run with full FANS for 4 plus hours ......, Still didn't come online
    Also both the blue and white light are constant .... no blinking whatsoever.
    Any ideas ...
    Solved!
    Go to Solution.

    It could be the device itself. Is it covered by the warranty?
    Are you concerned about retrieving the data or do you just want the device back up and running properly?
    If you are not concerned about data, you can try the following procedure at your own risk:
    Power down the device and reseat all the drives in the device. Power the device back on.
    If this doesn’t allow unit to boot, continue with below process.
       1. Turn off the device and pull out all the drives.
       2. Place any other drive 2, 3 or 4 in the first slot and boot up the device.
       3. Wait for sometime as the boot-up process can be slow.
             a. If it doesn’t boot, try another disk in slot 1.
       4. If it boots up correctly, insert another disk in slot 2.
            - Check UI for disk detection.
            a. If second disk is detected, turn it off, place disk 3 and 4 in unit and boot up.
            b. If it doesn’t boot-up correctly, remove 3 or 4 and retry. You may need to try to determine if 3 or 4 is bad in this case.
       5. Recreate the volume if it doesn’t start regenerating automatically
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • I bought a used macbook air,  it didn't come with the flash drive to do a factory reset.  Can I download the info needed and save it to my own flash drive and then do a factory reset?  If not what can I do?

    I bought a used macbook air,  it didn't come with the flash drive to do a factory reset.  Can I download the info needed and save it to my own flash drive and then do a factory reset?  If not what can I do?

    If it originally shipped with Mac OS X 10.6.8 or earlier, click here, phone Apple, and order a replacement.
    If it originally shipped with Mac OS X 10.7 or newer, restart it with the Option, Command, and R keys held down.
    (113079)

  • Can I execute MySql's command from java application?

    Can I execute MySql's command from java application? And how?
    For example :
    load data local infile 'D:\\myData.txt'
    into table myTable
    fields terminated by ';'
    lines terminated by '\n';

    1. get the jdbc driver for mysql from the mysql site at: http://dev.mysql.com/downloads/connector/j/5.0.html
    2. follow the installation instructiions... which you'll also find in your mysql manual...
    Happy travels. Keith.

  • Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

    Environment:
    OS:  Windows 7 32/64 bit, Windows 2008 Server 64
    bit/ Windows 2012 Server 64 bit
    Priority:
    - Critical
    Requirement: - Since
    the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
    Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
    command
    net use z: \\servername\sharedfolder /persistent:yes.
    Already Attempt:
    We tried to launch the CMD.exe using the DOS Task Scheduler AT command.  Here’s a sample command:
    AT 10:36 /interactive cmd.exe
    But I received a warning that “due
    to security enhancements, this task will run at the time excepted but not interactively.”
    It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
    Interactive services no longer work on Windows 7, Windows Server 2008 and above.
      2.  We
    tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
    <Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
    start RunCMDAsLSA
    In this case the service fails to start and results it the following error message:
    FAILED 1053: The service did not respond to the start or control request in a timely fashion.
      3. One
    suggestion, we found to launch CMD.exe via a Scheduled Task, but
    it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
      4. I read an article, which
    demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
    psexec -i -s cmd.exe
    PSTools worked fine, but It seems that in scope of Sysinternals Software License
    Terms. You may not "use the software for commercial software hosting services."
    Application will deploy on client, which will be like commercial,
    so we are not able to use PSTools.         
    Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
    I will be really thankful.

    Hi Sir,
    Nothing worked from above for us. You can see our remarks on posted query.
    That’s why, we posted on forum.
    And there will not be any vulnerability, because, if we will use "net
    use ..."
    in network domain; definitely,
    we will provide username and password of mapped drive system.
    And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
    We need a way; by which we can complete the requirement. Kindly assist.
    Regards,
    S. P. Singh

  • What does this mean: The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.??

    Is this an iTunes or disc issue?  I have burned music to these disc before.
    Error message: "The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry."
    Using........
    iTunes 10.7
    Memorex Music CD-R 40X 700MB 80min
    MacBook Pro
    Mac OS X 10.7.5
    2.4 GHz Core i5
    4 GB 1333 MHz DDR3

    Not sure. Try this:
    Troubleshooting CD burning errors:
    http://support.apple.com/kb/HT2955

  • ITunes 11.4 The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.

    27-inch, Late 2009
    Processor 2.66 GHz Core i5
    8 GB memory
    Software OS X 10.9.5
    iTunes 11.4
    Can not burn a playlist in iTunes 11.4 to a CD, upon completion of the burn operation get error message, "The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry."  Receive this message using 2 different external drives that are Apple compatible. 1. is a Pioneer SuperDrive that I had replaced from a previous Mac in a OWC enclosure, 2. the other is a OWC 8X Slim Portable USB 2.0 External. After receiving the error message I can re-insert the disc into the drive and it will mount the disc and it will list all the songs with the correct size, but none of them will play. iTunes then comes up asking me if I want to import the CD, at this time iTunes has a (not responding) status in Finder. Can burn from finder with no problem, only have issue in iTunes.
    Background
    Last year I took the iMac to the local Apple Store 3 times and they determined the optical drive was defective and replaced it, the last time even replacing the cable to it. When I attempt to burn playlist from internal Superdrive it states it can not burn due to media errors. I have tried Memorex, TDK and PNY  media with the same results. I thought purchasing the OWC Slim Portable USB 2.0 External would resolve the issue.  If I put a commercial audio CD into the Internal Superdrive it will not mount and will eject it, if I insert the commercial audio CD into the external drive it will mount and play. Now the extended warranty is expired on the iMac and I don't know what next to try.

    After multiple attempts to both find an answer to this problem or to fix it myself I've given up and switched to a Windows PC. The same media works just fine at maximum write speed with no special tricks needed. I got my iMac specifically to manage my photographs and burn images for friends and family. It has been nothing but a big disappointment to say the least. To read messages saying I need to lower my write speed or buy more expensive CDs is just laughable. Unless I see something major change I'm sticking with my Windows PC.

  • Can I add a sub woofer to my dv7-1245dx if it didn't come with one

    I know this laptop is old, about 5-6 years old or so. I have blown one of the speakers in it, and am going to replace it, even though they sound horrible when working, it's better than 1 crackling while you try to watch a movie or something. Since I have to rip the laptop apart for this and another reason, I looked up the woofer that I know was an option for the dv7's, and I have found some I can buy. I am wondering though, since mine didn't come with one, is it just a matter of adding the woofer, or maybe there is no connection to hook it up? Doesn't make much sense to buy one if there is no connector to hook it up to. I know I have room for it, there is a round plastic spacer/cup thing on the bottom of the laptop where the speaker should be pointing out, I just don't know (yet) if there will be a connection for it on my motherboard.

    Forgot Your Account Password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.

  • I updated iPhoto and now can not burn a cd on iPhoto.  I am getting error message: The burn to the SuperDrive drive failed. The disc drive didn't respond properly and can't recover or retry.

    I updated iphoto 9.4.3 and now it will not allow me to burn pictures on disc.  I am recieving the follwing message:
    The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry.
    I have tried to do a SMC Reset and PRAM reset and it still will not work.  Before the update I was burning pics onto the same dics with no problem.
    Any suggestions on what to do?
    Thanks!

    Hey MGRUBE,
    Thanks for the question. I understand you are experiencing issues with burning a disc. The following resource may help to resolve your issue:
    Disc Burning Quick Assist
    http://support.apple.com/kb/ht1152
    Thanks,
    Matt M.

  • Can I return my iPad in the states if I bought it at an apple store in the UAE because I wasn't aware it didn't come with FaceTime at the time?

    Can I return my iPad in the states if I bought it at an apple store in the UAE because I wasn't aware it didn't come with FaceTime at the time?

    Your only option is to sell the iPad and buy a new one.
    Apple Reuse and Recycle Program
    http://store.apple.com/us/browse/reuse_and_recycle
    How to Sell Your Old iPad  http://tinyurl.com/85d69lk
    Other sources to sell.
    eBay Instant Sell http://instantsale.ebay.com/?search=ipad
    Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
    For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
    Sell Electronics for Cash - Next Worth  http://www.nextworth.com/
    Buy My Tronics  http://www.buymytronics.com/
    Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
    Totem http://www.hellototem.com/
     Cheers, Tom

Maybe you are looking for