Can't execute query after upgrading to 7.0

Hi
After upgrading from 3.5 to 7.01 some users can't execute queries. After opening the query in BEx Analyser (3.5 version) nothing happens, just a 'blank' excel screen. And then I again can try to open the query.
If they execute the same query by a workbook there is no problems.
I made a copy of one of the users and then no problems.
Any hint or solutions?

Dear All,
I am facing the same issue: I am not able to run BEx3.5- queries in Excel 2010 (I can log on, select the query but then nothing happens...), with 7.0- queries everything works fine. For another user with exactly the same profile, the issue doesn't occur.
Were you able to fix the issue, and if yes, what needs to be done?
Regards,
Harald

Similar Messages

  • I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

    I can't open firefox after upgrading to 4.0
    I get the message over and over again that i have to restart my computer for upgrading to firefox.
    I tried new installation. But i got problems on all my accounts

    Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
    Starting The Computer In Safe Mode;
    If running, turn your computer off.
    Remove any disks and thumb drives that are in your hard drives or ports.
    Now start your computer but also;
    '''Windows; '''Press the <F8> key repeatedly.
    '''Mac: '''Hold down the Shift key.
    '''Linux; '''Using the command line, Linux/Unix computers can be booted
    into various run levels that determine which resources are loaded.
    For example, "runlevel 1" is typically the equivalent to Windows and
    Mac safe modes.
    * Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
    When the '''Boot''' menu is displayed, release the key you were pressing.
    You must now choose what mode to use. The most used are;
    * Safe Mode; The computer runs with only a minimum set of programs.
    * Safe Mode '''With '''Networking; Same as above, but with internet access.

  • Can't launch color after upgrading to OS 10.5

    I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?

    Click here and follow the instructions.
    (46092)

  • Can´t open LR after upgrade to 5.3 without entering a licens key

    Can´t open LR after upgrade to 5.3 without entering a licens key

    I have seen comments from someone who indicated that every time they started Lightroom they were prompted for the serial number, even though they had already entered it. Is this your situation? I can't remember what the solution is, but I have seen that problem mentioned in the past.

  • Can't open Pages after upgrading to snow leopard on 10.6.8

    Can't open Pages after upgrading to snow leopard on 10.6.8

    Has Spotlight finished its indexing?  Check in the upper right.  If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

  • I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • WiSM can't function normally after upgrading from vesion 6.0.182 to 7.0.220.

    I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.
    When it was unstable, I found three strange condition
    1. A lot of log looks like this
    *osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)
    *osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'
    2. Internal Temperature was showed "sensor failed"
    3. CPU User load is Zero
    Anybody can tell me what wrong with the wireless controller ?

    Could be a hardware failure.

  • I can't load modules after upgrade

    I can't load modules after upgrade xfree 4.4.0-2, gcc 3.4.0-1, perl 5.8.4-1 and kernel 2.6.5-3.I don't have even access to the internet from Arch.System says that modules have invalid version.
    What can I do now?

    You were right robot5x. After command lilo I have got modules loaded properly.Thanks.

  • HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • Can't run KDE after upgrade

    I've upgraded glibsc, filesystem and migrated to systemd. I can't load KDE after it. I didn't find any info about KDE and systemd, but seems systed is the problem. KDM and initializations works without troubles, but kde plasma and desktop doesn't show up. Black screen or wallpaper and cursor is visible. Some of my daemon.log:
    Dec 27 11:40:17 localhost dbus[195]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
    Dec 27 11:40:17 localhost systemd[1]: Starting Authorization Manager...
    Dec 27 11:40:17 localhost systemd[1]: upower.service: main process exited, code=dumped, status=5/TRAP
    Dec 27 11:40:17 localhost systemd[1]: Unit upower.service entered failed state
    Dec 27 11:40:17 localhost systemd[1]: polkit.service: main process exited, code=exited, status=1/FAILURE
    Dec 27 11:40:17 localhost systemd[1]: Failed to start Authorization Manager.
    Dec 27 11:40:17 localhost systemd[1]: Unit polkit.service entered failed state
    Dec 27 11:40:42 localhost dbus-daemon[195]: dbus[195]: [system] Failed to activate service 'org.freedesktop.PolicyKit1': timed out
    Dec 27 11:40:42 localhost dbus[195]: [system] Failed to activate service 'org.freedesktop.PolicyKit1': timed out
    Dec 27 11:40:42 localhost udisks-daemon[664]: (udisks-daemon:664): udisks-daemon-CRITICAL **: error getting authority reference: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Activation of org.freedesktop.PolicyKit1 timed out
    Dec 27 11:40:42 localhost systemd[1]: udisks.service: main process exited, code=exited, status=1/FAILURE
    Dec 27 11:40:42 localhost systemd[1]: Unit udisks.service entered failed state
    Probably I need to show some other log? I'm not sure which exactly.

    I've dived into systemd and had some progress. One of problems was with conflict between udisk2 and udisk (both were loaded). As far as I understand KDE doesn't support udisk2, so I did systemctl disable udisk2.service. Now there are no failed units:
    UNIT LOAD ACTIVE SUB DESCRIPTION
    proc-sys...t_misc.automount loaded active running Arbitrary Executable File Fo
    sys-devi...-net-eth0.device loaded active plugged /sys/devices/pci0000:00/0000
    sys-devi...-sda-sda1.device loaded active plugged ST3120026A
    sys-devi...-sda-sda2.device loaded active plugged ST3120026A
    sys-devi...-sda-sda3.device loaded active plugged ST3120026A
    sys-devi...block-sda.device loaded active plugged ST3120026A
    sys-devi...block-sr0.device loaded active plugged HL-DT-ST_DVDRAM_GSA-4163B
    sys-devi...und-card0.device loaded active plugged /sys/devices/pci0000:00/0000
    sys-devi...block-fd0.device loaded active plugged /sys/devices/platform/floppy
    sys-devi...tty-ttyS2.device loaded active plugged /sys/devices/platform/serial
    sys-devi...tty-ttyS3.device loaded active plugged /sys/devices/platform/serial
    sys-devi...tty-ttyS0.device loaded active plugged /sys/devices/pnp0/00:09/tty/
    sys-devi...tty-ttyS1.device loaded active plugged /sys/devices/pnp0/00:0a/tty/
    sys-module-fuse.device loaded active plugged /sys/module/fuse
    sys-subs...ices-eth0.device loaded active plugged /sys/subsystem/net/devices/e
    -.mount loaded active mounted /
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File Sys
    home.mount loaded active mounted /home
    proc-sys...infmt_misc.mount loaded active mounted Arbitrary Executable File Fo
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted Temporary Directory
    systemd-...ord-console.path loaded active waiting Dispatch Password Requests t
    systemd-...ssword-wall.path loaded active waiting Forward Password Requests to
    colord.service loaded active running Manage, Install and Generate
    console-kit-daemon.service loaded active running Console Manager
    console-...em-start.service loaded active exited Console System Startup Loggi
    crond.service loaded active running LEGACY unit for "crond" rc s
    cups.service loaded active running CUPS Printing Service
    dbus.service loaded active running D-Bus System Message Bus
    [email protected] loaded active running Getty on tty1
    kdm.service loaded active running K Display Manager
    network.service loaded active running LEGACY unit for "network" rc
    openntpd.service loaded active running OpenNTP Daemon
    polkit.service loaded active running Authorization Manager
    rc-local.service loaded active exited /etc/rc.local Compatibility
    samba.service loaded active running LEGACY unit for "samba" rc s
    syslog-ng.service loaded active running System Logger Daemon
    systemd-binfmt.service loaded active exited Set Up Additional Binary For
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-remount-fs.service loaded active exited Remount Root and Kernel File
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-...es-setup.service loaded active exited Recreate Volatile Files and
    systemd-...-trigger.service loaded active exited udev Coldplug all Devices
    systemd-udevd.service loaded active running udev Kernel Device Manager
    systemd-...sessions.service loaded active exited Permit User Sessions
    systemd-...le-setup.service loaded active exited Setup Virtual Console
    udisks.service loaded active running UDisks
    udisks2.service loaded active running Disk Manager
    upower.service loaded active running Daemon for power management
    dbus.socket loaded active running D-Bus System Message Bus Soc
    dmeventd.socket loaded active listening Device-mapper event daemon F
    lvmetad.socket loaded active listening LVM2 metadata daemon socket
    syslog.socket loaded active running Syslog Socket
    systemd-initctl.socket loaded active listening /dev/initctl Compatibility N
    systemd-journald.socket loaded active running Journal Socket
    systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
    systemd-...d-control.socket loaded active listening udev Control Socket
    systemd-udevd-kernel.socket loaded active running udev Kernel Socket
    dev-sda2.swap loaded active active /dev/sda2
    arch-daemons.target loaded active active Arch Daemons
    basic.target loaded active active Basic System
    cryptsetup.target loaded active active Encrypted Volumes
    getty.target loaded active active Login Prompts
    graphical.target loaded active active Graphical Interface
    local-fs-pre.target loaded active active Local File Systems (Pre)
    local-fs.target loaded active active Local File Systems
    multi-user.target loaded active active Multi-User
    remote-fs.target loaded active active Remote File Systems
    sockets.target loaded active active Sockets
    sound.target loaded active active Sound Card
    swap.target loaded active active Swap
    sysinit.target loaded active active System Initialization
    syslog.target loaded active active Syslog
    systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary D
    But it's still not working. Seems now it's dbus problem or so. What do I need to run KDE? How can I figure it out? Any wiki? suggestions?

  • Can't open project after upgrade

    Hi
    After upgrading from iMovie 9 to iMovie 11, i have a project that i can't open any more. When i choose it in the project library the preview window freezes and the "edit project" button fades out so that I can't open it.
    Any one else got the same problem or know how to fix it.

    Hi I have the same problem. Did you manage to find a solution?
    Thanks

  • Can't log in after upgrading to mavericks

    After upgrading to Mavericks, I at first seemed to lose the 2nd HD (all data), then list the ability to log in
    Help!

    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

  • I can't hear sound after upgrading to lion

    I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. When it happens So I have to restart system everytime it happens. Anyone any ideas or maybe someone out there has the same problem?

    I'he double checked everything, only 1 output device (internal speakers). As I said before, it is weird because I can play iTunes and can hear "beep", but neither youtube sound, nor game sound or internet radio seems to be working, no sound whatsoever. But this time system didn't go to sleep, it has just happened suddenly.... Restart again then!

  • I can't update packages after upgrading pacman to 4.0.3

    I know this was already treated broadly about two months ago, but I can't update after upgrading pacman because of continuous problems with certain signatures (at least one).
    I have already tried this:
    rm -rf /etc/pacman.d/gnupg
    pacman -Scc
    pacman-key --init
    pacman-key --populate archlinux
    But I still get this error when trying to upgrade the system:
    error: virtuoso: signature from "Andrea Scarpino (Arch Linux) <[email protected]>" is invalid
    error: failed to commit transaction (invalid or corrupted package)
    Errors occurred, no packages were upgraded.
    Could anybody help me? I'm pretty devastated with this.
    Thanks!
    My /etc/pacman.conf
    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir = /
    #DBPath = /var/lib/pacman/
    #CacheDir = /var/cache/pacman/pkg/
    #LogFile = /var/log/pacman.log
    #GPGDir = /etc/pacman.d/gnupg/
    HoldPkg = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst = pacman
    #XferCommand = /usr/bin/curl -C - -f %u > %o
    #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    #CleanMethod = KeepInstalled
    Architecture = auto
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    #IgnorePkg =
    #IgnoreGroup =
    #NoUpgrade =
    #NoExtract =
    # Misc options
    #UseSyslog
    #UseDelta
    #TotalDownload
    CheckSpace
    #VerbosePkgLists
    # By default, pacman accepts packages signed by keys that its local keyring
    # trusts (see pacman-key and its man page), as well as unsigned packages.
    #SigLevel = Optional TrustedOnly
    # NOTE: You must run `pacman-key --init` before first using pacman; the local
    # keyring can then be populated with the keys of all official Arch Linux
    # packagers with `pacman-key --populate archlinux`.
    # REPOSITORIES
    # - can be defined here or included from another file
    # - pacman will search repositories in the order defined here
    # - local/custom mirrors can be added here or in separate files
    # - repositories listed first will take precedence when packages
    # have identical names, regardless of version number
    # - URLs will have $repo replaced by the name of the current repo
    # - URLs will have $arch replaced by the name of the architecture
    # Repository entries are of the format:
    # [repo-name]
    # Server = ServerName
    # Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # The testing repositories are disabled by default. To enable, uncomment the
    # repo name header and Include lines. You can add preferred servers immediately
    # after the header, and they will be used before the default mirrors.
    #[testing]
    #SigLevel = PackageRequired
    #Include = /etc/pacman.d/mirrorlist
    [core]
    SigLevel = PackageRequired
    Include = /etc/pacman.d/mirrorlist
    [extra]
    SigLevel = PackageRequired
    Include = /etc/pacman.d/mirrorlist
    #[community-testing]
    #SigLevel = PackageRequired
    #Include = /etc/pacman.d/mirrorlist
    [community]
    SigLevel = PackageRequired
    Include = /etc/pacman.d/mirrorlist
    # An example of a custom package repository. See the pacman manpage for
    # tips on creating your own repositories.
    #[custom]
    #SigLevel = Optional TrustAll
    #Server = file:///home/custompkgs
    Last edited by [DoodoM] (2012-08-03 23:39:56)

    Thanks everyone! I guess it was a faulty mirror.
    I also had problems upgrading glibc because /lib had to be linked to /usr/lib, but I fixed it seeking for helpful tips on the forum. What I did was move everything from /lib to /usr/lib, shutdown, start adding break=postmount to kernel line, mount the filesystem, remove /lib folder, link /usr/lib to /lib and reboot. Then I reinstalled glibc and everything went well.
    Now some fonts look half-cutted in Gnome Shell when the window or panel which contains them is in background and I don't know why. But it is not the first time I have "graphical artifacts" with Arch Linux on this laptop. I think has something to do with the compositing.

  • Xclock Error: Can't open display: - after upgrading to openSSH 5.2p1

    I have got two servers apssvrX and apssvrZ on OEL. Both were built by the same team using their standard build scripts.
    Having received the servers I had installed Oracle (ODI) product on it successfully.
    Then as a part of requirement and as per Oracle support's advise, I had upgraded the ssh version on apssvrX server from OpenSSH_4.3p2 To OpenSSH_5.2p1, so that, I can implement the chroot jailing.
    As per Oracle advise, I had downloaded the 3 RPMs from "_http://layer1.rack911.com/openssh/rhel5/x86_64/" to run them on my first server i.e., apssvrX and then configured the sshd services following the below steps:
    a) Modify /etc/ssh/sshd_config to comment the below line:
    #Subsystem sftp /usr/libexec/openssh/sftp-server
    b) Add below lines:
    Subsystem sftp internal-sftp
    Match Group sftponly
    ChrootDirectory %h
    X11Forwarding no
    AllowTcpForwarding no
    ForceCommand internal-sftp
    Then lastly, Restart sshd services complete the configuration
    # /etc/init.d/sshd restart
    apssvrX server current details are as below:
    apssvrX$ uname -a
    Linux apssvrX 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    apssvrX$ ssh -V
    OpenSSH_5.2p1, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
    My problems started from this point onwards. I want to install another Oracle product using OUI, but when I try to execute xclock using the Exceed HummingBird tool on apssvrX server then it fails with the error - (xclock) Error: Can't open display:
    I tried the DISPLAY variable setup as well but to no use.
    Whereas I can successfully execute the xclock on apssvrZ and OUI as well. Its config details are as below:
    apssvrZ$ uname -a
    Linux apssvrZ 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    apssvrZ$ ssh -V
    OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
    Please advise the way forward.

    Tried but still same error.
    Affected servers's sshd_config is as below:
    [root@apssvrX]# cat /etc/ssh/sshd_config
    # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
    # This is the sshd server system-wide configuration file. See
    # sshd_config(5) for more information.
    # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
    # The strategy used for options in the default sshd_config shipped with
    # OpenSSH is to specify options with their default value where
    # possible, but leave them commented. Uncommented options change a
    # default value.
    #Port 22
    Protocol 2
    Protocol 2
    #AddressFamily any
    #ListenAddress 0.0.0.0
    #ListenAddress ::
    # HostKey for protocol version 1
    #HostKey /etc/ssh/ssh_host_key
    # HostKeys for protocol version 2
    #HostKey /etc/ssh/ssh_host_rsa_key
    #HostKey /etc/ssh/ssh_host_dsa_key
    # Lifetime and size of ephemeral version 1 server key
    #KeyRegenerationInterval 1h
    #ServerKeyBits 768
    # Logging
    # obsoletes QuietMode and FascistLogging
    #SyslogFacility AUTH
    SyslogFacility AUTHPRIV
    #LogLevel INFO
    # Authentication:
    #LoginGraceTime 2m
    PermitRootLogin without-password
    #StrictModes yes
    #MaxAuthTries 6
    #RSAAuthentication yes
    #PubkeyAuthentication yes
    #AuthorizedKeysFile .ssh/authorized_keys
    # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
    #RhostsRSAAuthentication no
    # similar for protocol version 2
    #HostbasedAuthentication no
    # Change to yes if you don't trust ~/.ssh/known_hosts for
    # RhostsRSAAuthentication and HostbasedAuthentication
    #IgnoreUserKnownHosts no
    # Don't read the user's ~/.rhosts and ~/.shosts files
    #IgnoreRhosts yes
    # To disable tunneled clear text passwords, change to no here!
    #PasswordAuthentication yes
    #PermitEmptyPasswords no
    PasswordAuthentication yes
    # Change to no to disable s/key passwords
    #ChallengeResponseAuthentication yes
    ChallengeResponseAuthentication no
    # Kerberos options
    #KerberosAuthentication no
    #KerberosOrLocalPasswd yes
    #KerberosTicketCleanup yes
    #KerberosGetAFSToken no
    # GSSAPI options
    #GSSAPIAuthentication no
    GSSAPIAuthentication yes
    #GSSAPICleanupCredentials yes
    GSSAPICleanupCredentials yes
    # Set this to 'yes' to enable PAM authentication, account processing,
    # and session processing. If this is enabled, PAM authentication will
    # be allowed through the ChallengeResponseAuthentication mechanism.
    # Depending on your PAM configuration, this may bypass the setting of
    # PasswordAuthentication, PermitEmptyPasswords, and
    # "PermitRootLogin without-password". If you just want the PAM account and
    # session checks to run without PAM authentication, then enable this but set
    # ChallengeResponseAuthentication=no
    #UsePAM no
    UsePAM yes
    # Accept locale-related environment variables
    AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
    AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
    AcceptEnv LC_IDENTIFICATION LC_ALL
    #AllowTcpForwarding yes
    #GatewayPorts no
    #X11Forwarding no
    X11Forwarding yes
    #X11DisplayOffset 10
    #X11UseLocalhost yes
    #PrintMotd yes
    #PrintLastLog yes
    #TCPKeepAlive yes
    #UseLogin no
    #UsePrivilegeSeparation yes
    #PermitUserEnvironment no
    #Compression delayed
    #ClientAliveInterval 0
    #ClientAliveCountMax 3
    #ShowPatchLevel no
    #UseDNS yes
    #PidFile /var/run/sshd.pid
    #MaxStartups 10
    #PermitTunnel no
    # no default banner path
    #Banner /some/path
    # override default of no subsystems
    Subsystem sftp /usr/libexec/openssh/sftp-server
    ## Commented the sftp jailing configuration
    ##Subsystem sftp internal-sftp
    ##Match Group sftponly
    ## ChrootDirectory %h
    ## X11Forwarding no
    ## AllowTcpForwarding no
    ## ForceCommand internal-sftp

Maybe you are looking for