Can't explain why!!!

A few days ago, I read that maybe, Air Tunes drop outs were caused by router. So I went to try new solutions to my problem that exists since iTunes 9.0.
I tried to set new settings on my Belkin wireless G router. As suggested, I made a backup of my settings. The next day, my local net was down. I could not have internet connection on my MBP with Airport, my iMac being connected directly on Internet.
So I was forced to go back to my saved settings. So did I. And then, I could reach Internet on my MBP as usual.
This evening, having moved my MBP 25 feet away Airport Express (usually, it is 10 feet away) I can note that for nearly two hours, now, I got no failure, no drop out!!
I dont understand why, but if I find, I will tell you!

This is not the experience we want you to have Diphone2014.I'm sorry your data usage increased. You went from a 3g device to a 4g device which is much faster than your previous phone. Do you use wifi when available? this will help prevent excessive data usage.
KinquanaH_VZW
follow us on Twitter @vzwsupport

Similar Messages

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

Can anyone explain why all of my Spry Assets on a live website have suddenly stopped working?

Can anyone explain why all of my Spry Assets on a live website have stopped responding? I have checked that the Spry CSS and JS files are in place. Then checked the files on Dreamweavers live view and they are not working there either. It was fine a few weeks ago, it is almost as if the web browsers have stopped rending Spry, for example, the links for the collapsible panels are not even being recognised as links.
I am using 'old' spry assets on Dreamweaver CS4 (if that makes a difference). The Spry Assets used are Tabbed Panels and Collapsible Panels.
Thanks for your help.

Something has been going on, when I look at the bottom of your document (as pasted below), this is normally all at the top after the links to external style sheets.
<script src="js/jquery-1.10.2.min.js"></script>
<script src="js/lightbox-2.6.min.js"></script>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
   <script type="text/javascript" charset="utf-8" src="Menu_Photography_edgePreload.js"></script>
   <script src="SpryAssets/SpryCollapsiblePanel.js" type="text/javascript"></script>
   <script type="text/javascript">

</script>

Can anyone explain why on my iPhone 4S, whenever I play music, it won't hold my place in the song? I pause it, and then when I go back later, it's all the way back at the beginning? A google search was not very helpful, any tips would be great!

Can anyone explain why on my iPhone 4S, whenever I play music, it won't hold my place in the song? I pause it, and then when I go back later, it's all the way back at the beginning? A google search was not very helpful, any tips would be great!

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

I can't deauthorize all computers. It acts like it is doing it, but it never succeeds and no message returns saying why it didn't work. Can anyone explain why this is happening?

I had to rebuild a computer. When I got iTunes installed and tried to sync my iPod it said that I had reached my limit of five computers. I logged into my iTunes account and went through the process for deauthorizing all computers. It comes up with a messaging asking if I am sure I want to deauthorize all computer and I select the "Deauthorize computers" button. It never comes back with a message one way or another whether it was successful. When I get out of that screen and come back in, it still shows that I have 5 authorized computers. I can't sync my iPod. The deauthorization is not working. Can anyone explain why this is happening?

i guess no one helped? I'm having the same problem.
When i press the button to deauthorize all computers, i get an error saying 'my account can't process this at this time. please try again later'

I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

Have you tried reinstalling the original drive? Same symptoms with it?

My wife, daughter and I have iPhones. We all have iMessage and Send Read Receipts activated. All the messages sent between the three of us are blue except those that my wife sends to me. They are green. Can anyone explain why.

My wife, daughter and I have iPhones with iMessage and Send Read Receipts activated. All the messages sent between the three of us are blue however, when my wife messages me, the message appears in green on her iPhone. Can anyone explain why.

Because some kind of error occured. This is only from her iPhone to your iPhone? Whenever she sends a message to any other iPhone, it is sent as blue? And when anyone else sends you a message from an iPhone, it sends as blue?

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why?

My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why? Otherwise, the desktop runs fine.
The battery is new, and I zapped the little button on the main board once. I've noticed that the power supply plug is a little longer than the usual one for G4, and the AGP slot has an extra slot, which is black and about half inch long.

Hi Ursula,
the AGP slot has an extra slot, which is black and about half inch long.
I believe that is for ADC Monitor power if you had one, or a card with ADC, like the little tab on this one...
I think your startup problem is bad capacitors in the power supply or on the logic board, and the need to bleed off their charge before they work right to start.

Can anyone explain why

Can anyone explain why when I signed up to BT broadband some 4 years ago the estimated line speed I would get was estimated at 3.5Mbps (I was actually getting between 1 and 2 and every so often 2.5). Recently I've noticed a drop in speed, last week the estimated line speed was 1Mbps and now this week it is 0.512Mbps! Has this happened to anyone else?
In the last few weeks I have been suffering from dropped connection but it now seems stable. I did the bt speedtest and got the following
Download speedachieved during the test was - 463 Kbps
For your connection, the acceptable range of speeds is 50-500 Kbps.
Additional Information:
Your DSL Connection Rate :1024 Kbps(DOWN-STREAM), 224 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
with following router stats
ADSL
Type
<script type="text/javascript"></script> Interleave
Status
<script type="text/javascript">// document.writeln("No Defect"); // </script> No Defect
Downstream
Upstream
Data rate (Kbps)
<script type="text/javascript">// document.writeln("1024"); // </script> 1024
<script type="text/javascript">// document.writeln("224"); // </script> 224
Noise margin (dB)
<script type="text/javascript">// document.writeln("7.4"); // </script> 7.4
<script type="text/javascript">// document.writeln("6.0"); // </script> 6.0
Output power (dBm)
<script type="text/javascript">// document.writeln("15.3"); // </script> 15.3
<script type="text/javascript">// document.writeln("11.0"); // </script> 11.0
Attenuation (dB)
<script type="text/javascript">// document.writeln("50.0"); // </script> 50.0
<script type="text/javascript">// document.writeln("30.0"); // </script> 30.0
Any advice would be appreciated.

Yes for me and is happening to alot of people just check out threads on this forum.
I have been told by Bt open reach who came out to me, it is Bt doing this, and showed me evidence on the laptop to his computer connected to my master socket.
I quote " People sitting in India at computers messing about with peoples connections this is my 3rd callout to a property this week (week begining 14/06/2010) for the same problem you are fine this end its the exchange".
He added that I should state what he said. It may be worth hanging around for a moderator to contact you keep checking your thread, it would appear they are helpful, certainly alot less stressful than phoning India and chasing your tail. Still trying to get this sorted even got released only 1 month in 18month contract with no charge. However you do have to follow there complaint procedure which is not easy.
Hope you get sorted soon.
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Can anyone explain why I have a big chunk of memory (4.4GB) taking up space on my iPhone4?

can anyone explain why I have a big chunk of memory (4.4GB) taking up space on my iPhone4?

Because there is a big chunk of files in that section that take up space. Kind of a "duh" question.
Now if there is something specific you'd like to ask in an intelligent way, maybe reword the question or try a search.
We simply cannot help if you cannot clearly communicate the issue.

Can someone explain why upgrading to PSE 12 resulted in two kinds of people tags?

Can someone explain why upgrading to PSE 12 resulted in two kinds of people tags? One is the new Group tag (with its own two-person icon) and the other tag is the original People tag (one perswon silhouette icon) from previous version. If person already had been tagged the new People Group will not work. Anyone else having a problem or has found a solution?

jlovettjr wrote:
I would have no problem with using the new People tabs except for two things:
1) There are pictures of people that facial recognition cannot handle. An example would be a profile view. These have already been tagged with old people tags. The new People Tab is dependent on facial recognition and will not accept these.
I don't use facial recognition at all, sorry.
2) The mystery is that the conversion from old to new was not automatic during the upgrade. Hours on telephone with Adobe tech did not resolve how one reconciled the two different tags. It appears to be more than a problem of naming the tags.
As I explained, there was no conversion at all with my own categories, and I was too happy for that. From a number of other posts on that subject, I don't think that reconciling the two different kinds of tags is possible. I think I'll try a new conversion from an old PSE6 catalog so that I can play with the new scheme; that should work even without face tagging.

Can someone explain why the Secure Easy Setup light on a...

Can someone explain why the Secure Easy Setup light on a WRT54G would change from a steady green to steady orange after firmware upgrade? Everything is connecting properly, and I see no change in performance of network other than light change described. Thanks.

The way I understand the Secure Easy Setup button is this.
It will be orange when the router is in normal operation mode. The light turns green when you press the Cisco Systems button (that is orange normally) so that the router will search for the web device you are trying to connect to the router. If you want to disable this feature all together go into your router settings page at 192.168.1.1
Go to the Wireless tab, and then the Advanced Wireless Settings sub-heading, once in there look for the option SecureEasysetup and simply set it to disable (enabled is default) then click the save now and apply the settings. The light should be out now meaning you don't have the Secure Setup feature enabled.
It is just a personal choice to have it on or off, it should not affect router or internet performance unless you hit the button trying to connect a device to the network.
Message Edited by MontanaXVI on 12-14-2007 07:12 PM

HT3775 I have a .avi file that is not playing. It keeps telling me additional software is needed. I have Mac OS X 10.6.8. Can anyone explain why?

I have a .avi file that is not playing. It keeps telling me additional software is needed. I have Mac OS X 10.6.8. Can anyone explain why?

Because there's no codec installed on your system for that specific AVI, and there may be no Mac OS X component for it. Try installing Perian.
(65484)

Can any explain why the teathering option has dissapeared in GM iOS 5?

Can anyone explain why the teathering option has dissapeared in ios5?

You would have to ask the maker of the apps. They are the ones who choose what versions to release and make available.

Can you explain why there is an error at the line *pStart = *pEnd;

//program should reverse a given string.
//Original string is "SAW", and the same string reversed should be "WAS"
#include <stdio.h>
#import <string.h>
int main (int argc, const char * argv[]) {
// insert code here...
printf("This program reverses a string without blank spaces.\n");
char *sentenceArray = "SAW";
char temp;
char * pStart, *pEnd;
pStart = sentenceArray;
int stringLength = strlen(pStart);
pEnd = (pStart + stringLength -1);
printf("\nOriginal sentenceString is: %s", pStart);
printf("\naddress of pStart:%lu, value: %c", pStart, *pStart);//make sure pointer is at the start
printf("\naddress of pEnd:%lu, value: %c", pEnd, *pEnd);//ensures pointer is at the end
while (pStart < pEnd)
temp = *pStart;
*pStart = *pEnd;//can somebody explain why this is an error? Thank you.
*pEnd = temp;
++pStart;
--pEnd;
printf("\nReversed sentenceString is: %s", sentenceArray);
return 0;
//Thank you for your assistance!

To expand on Keith's answer a bit:
The problem, as you know, is with this line:
*pStart = *pEnd;
So, let's break this down a bit. This statement uses the dereference operator (the asterisk before each pointer) twice, and, as you probably know, the dereference operator allows you to access the value that a pointer points to, instead of accessing the value of the pointer itself (a memory address), which is what you would be accessing if you didn't use the dereference operator.
So, on the right side of the assignment you have *pEnd, which is basically saying to take the value pointed to by the pointer pEnd and assign in to whatever is on the left side of the assignment, and that's where your problem is -- the left side of the assignment. The *pEnd part is fine, but the +*pStart =+ part is not fine. What you are saying here is to take whatever is on the right side of the assignment (*pEnd) and assign it to the value that is pointed to by the pointer pStart. And, as Keith mentioned, that's your problem. The value that is pointed to by pStart is a string literal ("SAW" here), and a string literal (like any literal) can not have anything assigned to it -- it can not be written to -- it is read-only, as Keith said. And like anything else read-only, this means that it can not be on the left side of an assignment statement, and that's where you have it, so, we get an error.
The solution, as Keith gave, is to change pStart from a character pointer (which is what you have declared it as) to a character array, like so:
char sentenceArray[32] = "SAW";
This will fix your problem.
Hope this helped some. Pointers are rough business, especially when it comes to character pointers and character arrays and whatnot, and I still don't understand them well by any means, so keep at it. Best of luck!

Can't explain why!!!

Similar Messages

Maybe you are looking for