Can't export MP3 audio from Premiere Elements 9

I want to export the audio from my movie. The File, Export option appears to be unavailable, regardless of what I do; I saw elsewhere on the forum that all exporting is now done through the Share tab, and referring to PE8, the post recommended the "share to computer" tab. Under advanced options, I set the audio to be exported as an MP3, with no video. However, the "advanced" button leads to a screen with 3 tabs: "Format," "Video," and "Audio." I can make those changes under the "Audio" tab with no problem, and because I have chosen to export only the audio, there is no information under the "video" tab. The problem is that the "Format" tab only gives me two options, ".flv" and ".fl4" or something like that, and the resulting file appears to be a 7 second long, blank and silent video, played by Windows Live Movie Maker. How can I get my audio exported?

Are you using version 8 or version 9? It's hard to tell because you reference both.
In version 9, if you go to the Share tab and select the Computer option, you'll be taken to a screen with seven output options.
Audio wil be listed as your last option. (You do have to click on the Audio listing to select it.) and MP3s are certainly among the options listed on the Preset menu.
If you can't see it, you need to scroll down or resize your panels -- or your computer monitor may not be large enough. But it's there.

Similar Messages

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
If so how do I accomplish this act?
Are their additional menus available for Encore CS4?

The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
Good luck,
Hunt
PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

Can i transfer a project from premiere elements 13 to premiere elements 12?

i am working on a project in a free trial of premiere elements 13. i am going to buy premiere eements 12. will i be able to open my project from premiere elements 13 in premiere elements 12?

mefe
It has been the case that you cannot open a Premiere Elements project file (.prel) created in a later version in an earlier version.
And, you cannot open a Premiere Elements Windows project file in Premiere Elements Mac and vice versa.
ATR

Problems exporting HD video from Premiere Elements 9 for Vimeo (program crashes or video is blurry)

I have a 10 minute wedding video I am trying to export from Adobe Premiere Elements 9 to upload to vimeo. I followed the directions from this video: Exporting for upload to Vimeo with Adobe Premiere Elements on Vimeo to figure how to accomplish this. The first time I followed the directions, the resulting video file was fuzzy and blurry, not at all like the HD video I could view in the program before export. Since then, I've tried exporting it multiple times with different settings, and each time the program crashes when the video is around 95% complete. How can I rectify this situation? This is a wedding video I made for a paying customer who would like their video on vimeo as soon as possible.
Thanks for your help!
Let me know if you need more details or clarifications.
Laura

Laura
What are the properties of what you are putting on the Premiere Elements 9.0/9.0.1 Timeline? Are you working with a SD or HD file?
What have you set as the project preset when you started the projec?
1. So, video compression, audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio...as
much information as you can supply....sometimes the brand, model, settings of the camera recording the video will give us all the
information that you need to set up the project correctly or to verify that it has been set up correctly.
Case Study....
Let us assume that your video is 1920 x 1080 @ 29.97 progressive frames per second.
Project Preset in New Project Dialog
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
When you go to take your Timeline content to Vimeo from within the Premiere Elements 9.0/9.0.1 feature
Share/Online, you will discover that there is no Vimeo choice in that version.
So, what you are going to do is to export your Timeline to a file (AVCHD.mp4) saved to your computer hard drive and then upload that file
to Vimeo at the Vimeo website.
Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30
Have you been there and done that?
Summary...
The answers are in the details....needed
a. properties of source media
b. project preset
c. details of your project's Timeline content
c. export settings used
We will be watching for your follow up.
Thank you.
ATR

Exporting to QuickTime from Premiere Elements 9.0

A couple of years ago, there was an internet post by a guy named John Cloudman about export settings for high-quality videos for web sharing. There are a few parameters that he changed in the default export that produced very high quality videos. I noticed that in Premiere Elements 9.0, or in the updated version of QuickTime, there are a couple of new parameters that I don't know what to do with. Specifically, the following 4 parameters in Quicktime:
1) Field Order: the recommendation was to set it at "none," however, that is not an option. Options are: Progressive, Lower first, or Upper First
2) Then, there is a checkmark box for "Render at maximum depth." Not sure what to do there
3) Advanced Settings, there is a checkmark box for each of the following:
Key frame every _______frames
Optimize stills
Frame reordering
4) Bitrate Settings: There is a checkmark next to this item. If you check it, you can fill in a number
Limit data rate to ________ Kbps
Any suggestions?

Unfortunately, the poster cannot award themselves "points." Otherwise, Harm and I would have over 50,000!
Glad that you got the answer and the fix.
Good luck,
Hunt

I can't export an AAF from Premiere to Avid.

Why can I not open an AAF from Premiere CC 2015 in Avid Media Composer 7.0.4?
It is a simple edit in Premiere in 1080p 2997. The AAF imports to Avid but the video is offline
but the audio embeds in the AAF but the timecode of the audio is not matching the video.
The audio is stereo, not 5.1 dolby. Is there a metadata glitch somewhere? This is a bit
maddening. Thanks for any help.

Hi Dave,
Why can I not open an AAF from Premiere CC 2015 in Avid Media Composer 7.0.4?
There's no such thing as "Premiere CC 2015." Check the "About" splash screen and inspect the version number in the lower left corner. It should be 8.0, 8.1, or 8.2.
Regarding your issue, my guess is that the two are incompatible as much work was done on AAF for Premiere Pro CC 2014.2 (8.2), however, I do not know how far back it will affect versions of Media Composer imports. Can you try a trial of the current version of Media Composer and see if it works?
Thanks,
Kevin

Can you export created videos from Premiere Pro Trial to youtube?

Is it posible to export a created video from a trial of Premiere Pro to social media networks such as youtube or vimeo?

Yes.
Mylenium

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How can I export a completed project from Premiere Elements?

There are a number of formats you can export from Premiere Elements. All are available under the Share tab and the major output formats are available under the Personal Computer option.
To export your completed video for use in another project, use the DV-AVI output option.
To export your video for display on the internet, use the WMV or MOV output options.

I experienced the same problem as mreingrover. The Share features of iMovie appear to be completely unimplemented.
I had had MacKeeper installed for a short while on my previous Mac; never on my new MacBook Pro. I could not find any trace of it in Application Support, Launch Daemons, or LaunchAgents, in either my user Library or the root Library. But I figured maybe there was some trace somewhere that had been copied over from the old system, so I deleted iMovie and went to reinstall it from the App Store.
Now the App Store wants $14.95 for an app that has never worked right, and which is (I think) supposed to be free with my new MacBook Pro Retina.

Exporting 5.1 ac3 audio from Premiere Pro CS4

Hi there,
I wonder if anybody can help me out with exporting 5.1 ac3 audio from Premiere CS4 version 4.1.0?
I have a 3min long HD 5.1 clip that I need to cut down to 60seconds and add fade transitions to. The final clip will be used in a media player with very specific spec - the clip needs to remain HD 1080p with a frame rate of 29.97 and a maximum CBR of 38. The audio must be 5.1 aac. The format can be mpeg 2 or h.264. The overall quality loss needs to be minimal.
Up to now I have been cutting up footage that only needs to be stereo and I found the best way to to this while keeping quality was to use Prem Pro and export as mpeg 2 1080p 29.97, quality:5, bitratre: CBR 38, audio as mpeg layer 2 (as these clips were stereo only). These clips played back fine and looked great so I wanted to keep the 5.1 clip process as close to this as possible.
So far all I have been able to get from Premiere Pro is an audio codec called DVD_LPCM which the media player will not recognise. I'm a bit of a novice when it comes to 5.1 audio so I may be doing something obviously wrong...
- I have purchased the 5.1 surcode codec and its activated.
- I have started a new AVCHD (I need 1920x1080) 1080p 29.97 project with a 5.1 audio master
- The orignal file is an mpeg which I have pulled into PPro and selected Clip > Audio > Breakout to mono
- I take the 6 mono channels in the project panel and put them into thier own mono tracks in the sequence.
- the video I use is the original mpeg with the 5.1audio muted in the sequence.
- When i select each track in the project panel and go to Clip > Audio > Source channel mappings, I see that track has already been allocated a source channel. So I go to the Audio Mixer panel and adjust the 5.1 panners for each tyrack according to what the Source Channel Mapping window has told me - Audio 1 is is L, audio 2 is R, audio 3 is LS, 4 - Rs, 5- C and 6- LFE
- I cut the video and all the mono track to the 60seconds I need and export using these settings:
Video - exactly as before
Audio -
Format - Dolby Digital, Codec - SurCode, Audio Coding Mode: 3/1 (L, R, C, LFE, Ls, Rs - 5.1 Surround), LFE: on.
The clip exports with DVD_LPCM 5.1 audio. Is it to do with the AVCHD preset? Could anyone help me get aac? Any help would be appreciated.
Thanks in advance

Using AME and the SurCode Plug-in, here's how the dialog screen looks for the Audio Tab in PrPro 2.0. It should be similar in CS4:
You do have the Minnetonka SurCode DD 5.1 SS plug-in, right?
Good luck, and hope that this is helpful.
Hunt
PS - note that in the screen-cap, I have composited the dialog box, as though it fully displayed, with no need to scroll it. Depending on your display, you may need to scroll, and your scroll bars will look different from what you see here - just ignore that part of it.
Message was edited by: the_wine_snob - Added PS

Can I edit footage recorded in 1080p24 with 5.1ch surround audio using Premiere Elements 12? I'm only seeing stereo audio...

Hi all,
Quick one - I've recorded footage using a Sony HDR-PJ810 in 1080p24 with 5.1ch surround audio (currently experimenting with different frame rates, resolutions and audio). If I import this into a 1080p24 preset in Premiere Elements 12 then I see only stereo audio with no obvious way to add a 5.1 channel.
If I import this into a 5.1ch surround preset (like 1080i 30 5.1) then I can see the audio across 6 channels but it's obviously having to unevenly spread 24 frames across 30 spaces in order to match the frame rates (skipping some of the slots which I suspect will cause playback artifacts).
Is there any way to get a 5.1ch surround audio track within a 1080p24 project? (I don't see it as a preset). Thanks!

OraAmator
What computer operating system is your Premiere Elements 12 running on?
The answer is to create a 1080p24 5.1 Channel project preset.
Please see my work on the approach to doing this and related information. If necessary, I will write instructions specific to 1080p24 5.1 channel
ATR Premiere Elements Troubleshooting: PE11: Exporting a 1080p50 or 1080p60 file with 5.1 Channel Audio
ATR Premiere Elements Troubleshooting: PE11: Exporting a 1080p25 or 1080p30 file with 5.1 Channel Audio
ATR Premiere Elements Troubleshooting: PE12: Exporting a 720p50 or 720p60 file with 5.1 Channel Audio
Are you in a NTSC or PAL area? Reason for that question will be mentioned later.
ATR

Always asynchronous audio if I export an MXFop1a file with 8 channel audio from Premiere 2014.1 for delivery to XDCam HD U1 Sony.

I try now for hours to export an MXF op1a with 8 channel audio from Premiere CC2014.1 and with AME 2014.1 to copy the file on my XDCam drive u1 to a disc.
The file is always asynchronous after 20 or 30 minutes. The project is synchronous and also other codecs are synchronous if I export them. So I think it's a bug...
I use the newest Sony XDCam drivers. Also parts with no audio can't be render with intelligent render. If I use this option, Premiere or AME crashes...
I work on a mac system with 10.8.5 OSX.
Does anybody have the same problems or any ideas to solve my problem...
Best regards,
Florian

The following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

Exporting from premiere elements 4 to premiere elements 10

I am converting over from premiere elements 4 to premiere elements 10. I Have titles that were created in 4 that I would like to use in elements 10. Is there an easy way to export from one to the other?

Welcome to the forum.
You will want to Export as a Template, into the folder of your choice. That will yield a .PRTL file, that can then be opened in PrE 10. Unfortunately, I know of no way to automate, or batch that, so you will want to launch PrE 4, and then the Project(s), Select the particular Title, and choose Export>Template (or similar syntax).
I have my personal Title Templates located in a "Hunt Titles" folder. It is then available to PrE and PrPro.
Good luck,
Hunt

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

Can't upload from premiere elements to youtube

I'm trying to upload a 25 minute video to youtube. It says the following: "The video duration exceeds the maximum duration supported by the destination. Please reduce the duration of the video and try again."
youtube supports videos of this size now. How can I get past this? Thanks!

Thanks A.T. So far the default setting are working just fine, but this is good info in case that changes.Jan
From: A.T. Romano <[email protected]>
To: Janice Yuvan <[email protected]>
Sent: Saturday, May 2, 2015 11:30 AM
Subject: can't upload from premiere elements to youtube
can't upload from premiere elements to youtube
created by A.T. Romano in Premiere Elements - View the full discussionjanicey For your workaround, you have been pointed to Publish+Share/Computer/AVCHD with Presets = YouTube Widescreen HD.The default for that preset is 1280 x 720 @ 24 progressive frames per second with a bitrate of 8 Mbps (megabits per second). If you want other than that default setting, you can customize that preset to 1920 x 1080 @ 29.97 or 25 progressive frames as well under the Advanced Button Video tab of the preset. Determine if the bitrate needs adjustment and the file size is acceptable You might also want to explore using Presets = MP4 - H.264 1920 x 1080p30 (or 25 as appropriate) and customize the preset under the Advanced Button/Video Tab of the preset. Watch the file size. If you are OK with the 1280 x 720 for quality and file size, then please disregard the suggestion for this. If you are interested in the suggestion, do not hesitate to ask questions or ask for clarification if needed. ATR If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7505552#7505552 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7505552#7505552 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can't export MP3 audio from Premiere Elements 9

Similar Messages

Maybe you are looking for