Can't export/share project. share halts/freezes at 5%

My version of final cut pro does not have a share tab at the top thus I have to share > master file through the file tab. Each time I attempt to share it only reaches 5% complete before freezing. I have attempted many different variables and am thinking maybe theres an issue with the files I imported.
they are mostly mpeg 4 and some are protected mpeg 4s. please help, thank you.

Select the media in the browser, right-click and use transcode media. It will need a great deal of drive space, about 10 times more than the original.
Before that you should try switching off background rendering and trashing the existing render files.

Similar Messages

  • How can I export a project on an external drive in the latest version of iMovie?

    Before the latest release of iMovie I easily managed to export a project on an external usb drive and re-import such project on a different Mac... In the latest iMovie version, however, I cannot see my drive any more..
    So, how can I export a project on an external drive in the latest version of iMovie?
    Thank you in advance

    I'm not sure this is the best way, but you could create a new iMovie Library, move your project to that Library, then close the library. Then move the Library to your USB drive. Then, on the other Mac, in iMovie open the Library.

  • TS4168 i can't export my project the menu is in gray?

    i can't export my project the menu is gray and can select any thing.there is no problem with the project it edited just fine and had no problem with the clips too.
    thank you..

    Try and export from the project library. If it's still grayed out reinstall the application.

  • I can not export a project to roll the camera

    I can not export a project to roll the camera displays a message "an error occurred in exporting"

    Hi wishborne,
    I'm here to help! Are you unable to log in to ExportPDF, or unable to convert files once you're logged in? I tried to check your order history, but don't see any orders under the email address that you use here. Did you perhaps sign up using a different email address, or sign up via Adobe Reader?
    I look forward to hearing back from you. We will get to the bottom of this.
    Best,
    Sara

  • I can't Export my Projects in FINAL CUT PRO X

    HI Guys,
    I have got the Version 10.0.3 of FINAL CUT PRO X unfortunately i can't export any projects anymore. It always says com.apple.Compressor.CompressorKit.ErrorDomain error -1. . Is there any possibility to export the project anyways, without an update? I can't update the application because my internet is too slow.
    Best Regards
    Johannes Rausch

    You must update FCPX, how did you get your current version? You must have downloaded it from AppStore.

  • How can I export my project which is a fla. format to a avi. format? I am using FlashPro CC.

    How can I export my project which is fla. format to avi. format? I created my project using the "timeline" in FlashPro CC. I would like to have it as a avi. file. Thank you in advance.

    File > Export > Export Movie...
    That should do the trick! Then convert using Adobe Media Encoder, if desired.

  • My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project.  Does anyone know of a way to still export this project?

    My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project.  Does anyone know of a way to still export this project?

    jkrijgsman wrote:
    Does anyone have a good workaround for burning a DVD from an iMovie project now that iDVD is no longer around?
    There's Toast.
    http://www.roxio.com/enu/products/toast/titanium/
    $79.99
    Final Cut Pro X will also burn DVDs.
    $299.99
    How large is your movie?  Is it possible that you could output it as a QuickTime file and then burn that as a data DVD?  Is uploading to YouTube an option?
    Matt

  • I can't export my project in Final Cut Pro X

    Hey Troops. So after buying my new powerbook few months back finally have had a chance to use Final Cut Pro X. After completing my project, I went into 'FILE' clicked on 'SHARE' just see all my options greyed out. I checked to see if I needed an update and that doesn't appear to be the problem.
    In past versions I would of thought I forgot to render, but with the auto render thats not the case.
    Could use some help.
    Cheers,
    Dallas

    I don't think this has anything to do with updates/
    Make sure that your timeline has focus.
    Also, it may well be that some of your clips has not been completely imported and still references the camera card. In that case, you can't export.
    Locate the clip or clips (they may be showing a little camera badge in the browser) and do File->Import->Reimport from Camera/Archive...

  • I can not export my Project (vers. 10.0.8)

    I have a Problem to export my Project to for instance "Apple Devices 1080p" or any other option. My Mac says it's working in the Background when I want to switch it off, but the Projct is stil 0% after hours. Length of the Project 8'54". Other Projects some Weeks ago, I think before the last update worked with no Problems.

    Take a look at the list below and se whether something fixes your problem. Many reports of export issues.
    Russ
    Russ H Boston MA
    Re: How do I find a certain frame that is causing an error when sharing project 
    May 31, 2013 5:22 PM (in response to PapaSnowSmurf)
    If it doesn't export you could copy the project to a new project and/or use the replace edit to replace the guilty clip.
    Magic Feather posted a few other export fixes recently. Let me look for them.
    Russ
    Magic Feather Los Angeles, CA
    Re: Quicktime error: -50
    May 30, 2013 7:30 PM (in response to Russ H)
    Hey Russ,
    Just to throw it out there but we encounter this bug every day (literally) and the easist solution we've found is:
    1.  Turn off background rendering when you want to export.
    2.  Quit FCPX
    3.  Delete the "Renders" folders from both the Event and Project.
    4.  Empty Trash
    5.  Open FCPX, export.
    I only mention it because sometimes changing a clip in the edit can cause problems with clients if your forget to change it back.

  • I can't export my project because error (-108)

    There is no way to export my project, i've tried all qualities from mobile to HD1080p...
    Whats the problem??

    9 cases of 10 - there use to be an extra hard disk connected working as TimeMachine.
    By selecting this and set it to OFF usually works.
    But in rare cases - No external hard disk is there and TimeMachine not active.
    • Then a low free space on Main hard disk (<1Gb) can be the culprit.
    NOT so here - And I can only guess
    • that material used in iMovie is of a strange format (a format iMovie have hard to use) and by converting it outside iMovie first helps. I would convert it to streamingDV or AIC.
    Still there are many more possibly problem makers - I would search forum for Error -108 to get inspiration to track the mischief down.
    Yours Bengt W

  • Can I export a project from iMovie 11 to a camera?

    Can I export a movie from imovie 11 to a camera?  If so, how do I do it?  Thank you!!!

    iDVD is not avail via the MAS.
    only in the boxed version of iLIfe (any version).
    consider other tools, as Roxios Toast or the free Burn .
    those are less integrated into iLife, less easy modifyable and for sure not as 'good looking' as iDVD.
    in case you still own old installer-disks of any old Mac, consider a 'custom install' of iDVD/iLife from those (mostly on Disk #2).

  • How can I export/share a project/movie with iMovie 10(.0.1)?

    Hi,
    I generate a movie with images from iPhoto and underlaid a sound file. In iMovie the film looks great and now I want to share/export it. But the share button doesn't work: I click on it and nothing happens – no submenu, no window, nothing. It seems there is missing a function behind the menu item.
    I closed iMovie, restart it – nothing.
    I shut down the Mac and reboot it – nothing.
    I deleted the preferences after closing the app and restart it – nothing happens.
    What can I do?
    This happens with image movies AND with clip movies generated with iMovie.
    Thanks for a hint.
    CK

    Thanks Chris,
    I will uninstall the imovie app using the mackeeper uninstaller, but wanted to ask if I trash /delete all the files
    when I do this? When it scans my computer it says I have two versions of imovie and other files as well.
      Just wanted to check if I will still have my trailer left in my user file on the computer.
    Sorry to bug you, but I spent alot of time doing it and dont want to lose the work . So want to be sure I am doing it the right way!
    Cheers Graham

  • How can I export/share events (not projects)?

    Hi,
    I would like to share my raw video footage-- "events" in iMovie-- with a colleague so she can use it for her own projects. At a one-to-one appointment last week, the trainer told me the only way to share it was to save it to an external hard drive. She said the hard drive would appear in the events window and then I could just drag the events onto the drive. I just bought a drive, plugged it in, and it appears in the events window, but iMovie won't let me drag the events onto it.  I can't figure out a way to move the events over to the hard drive. I'm not using Time Machine because I only want to copy the video footage and my colleague uses a PC.
    Help??  Thanks!

    Update: I reformated the hard drive to be just for Mac, and I could drag the events over.
    So is there a way to save the events to a hard drive formated for BOTH Macs and PCs?
    Thanks!

  • Can I export/share a line file from free CC as pdf or illus cs2 file so client can view/edit?

    I can't find a clear answer to this really simple question so I hope someone here can help me.
    I haven't purchased my ink and slide yet, or used any of the creative cloud software. Before I do I want to make sure I understand what I can share with Line and the free level of CC. I want to use them for a particular client who is still old school. So... If I have a drawing created in Line on my ipad and a client with an older macbook pro, still running CS2 (so osx 10.6.8), and I have an ipad with Line and a free Creative Cloud membership (but no CC versions of Adobe software other than Line), is it possible to:
    send her a pdf she can open and print?
    send her a file she can open/edit/print in CS2?
    send her anything she can open and/or edit and/or print?
    Print something I can mail to her.
    I guess I'm basically asking: what are my limitations for sharing/printing Line drawings with only the free CC membership?

    Short answer is No.
    Be aware the free level of CC is for CCStorage only. Although they don't mention it you need a Creative Cloud Subscription (which includes all their pro desktop applications) to export Vectors.
    If your friend has a CC subscription you might ask her to log in using her details and transfer the files that way

  • I can´t export(share) mi proyect using motion 5, Help me please

    Hi, when i try to share mi proyect(export) don´t do nothing, just a flash i share word
    thanks

    solve i updated and works cool

Maybe you are looking for

  • Rip dvd's into itunes/ipod???

    Hi -- with itunes 6 and the new ipod, how can I transfer my own video files to the ipod? can i rip a dvd I own to itunes/ipod??? -Eric

  • Cant edit sql files,help!

    when I edit a sql file,I can't delete anything ,if there is any configuretion that can block the rights?But It's strange to see that ,I can append any words to the files,anybody can help me ,thanks!

  • When is Solaris 10 update 9 due?

    At the beginning of the year there were hints that Solaris 10 update 9 was due in around April/May, as we are now into July 2010. Is Solaris 10 update 9 due ( or Solaris 11 ) going to arrive before the end of year?

  • Accessibility : correspondance between buttons and menu items

    Hello, I have been dealing with accessibility API to retrieve information from menu items and buttons in tool bar. In addition, I would like to be able to create a correspondance between a button (let's say, the "new message" button in mail) and a me

  • You don't have permission to save in this location win 7

    Hi am only the user of my laptop and am the admin and when am try to save any file in Local C or on Pen drive I get this message  " You don't have permission to save in this location.  Contact the administrator to obtain permission.  Would you like t