Can't export to DVD because Quicktime fails with error: 0

I've got several projects in FCP X that I need to create DVD images of. My first approach was to export them to Compressor, set the settings, and then submit them. When I did that, the first project exported fine, creating an AC3 file and an M2V file needed for a DVD. And since I had a Post-Transcoding Action set to create a DVD image on the hard drive, I got a nice IMG file.
But the second and subsequent projects all failed. The video target worked fine, but each of the audio targets failed with an error. In the History window, they each have this:
Failed: QuickTime Error: 0
So I did some searching here for suggestions, but it seems most of the answers are for older versions of FCP and Compressor. I did Reset Background Processing, but that didn't fix it. So then I went back to FCP X and did a Share to DVD directly, instead of going through Compressor. The same thing happened: the job failed, and I got QuickTime error 0.
So my first question: How can I get more information about why QuickTime is failing? Is there a more detailed log somewhere to tell me specifics other than a vague error code number?
Second, why would the first project's audio export just fine but the second project didn't? They use exactly the same project properties, the same effects, etc.
The only difference I see is that the audio and video clips were encoded with different codecs. The first one (the one that worked) has an audio config of 1 Mono with clips that are Linear PCM. The second project (the one that failed) has an audio config of 2 Mono with clips that are AAC.
But I do tons of projects using AAC clips that I can "share" to DVDs just fine. Any clues?
Thanks,
Todd.

Correction: I don't use AAC audio clips all the time. I was mistaken. Almost all my projects use Linear PCM audio clips (the kind that are working OK). So is there something I need to know about AAC audio that could make it generate QuickTime Error: 0 when converting to Dolby AC3 format?

Similar Messages

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Essbase LCM export on non-foundation machine fails with error message EPMLC

Running an lcm utility command line export on a non- foundation machine fails with an error message:
EPMLCM-30043: Unable to load the plugin class com.hyperion.essbase.lcm.ESBLCMPlugin
bare in mind that:
- other exports like planning and foundation metadata exports run succesfull on this non-foundation machine
- running an essbase export from the foundation user interface succeeds too.
What files can be missing or other issue can cause this?
Detlev

release transfer should work by steps what have you followed only requirement is to have create the similar namespace in the target software component first and then do the release transfer.
one thing just try unchecking the target SWCV (original objects option at down it should work then)
1.To release objectse from one SCV to another you need to follow the following procedure.
Login to Integration Repository.
Click on Tools -> Release Transfer. You can select the source & target interface or select individual objects if you want..
If you need further clarifications do let us know.
2.you may not have authorization to use Release Transfer so i would suggest use copyobject option to copy from one SWCV1 to SWCV2. right click on source select cop option change the SWCV
Select the namespace under your SWCV. Go to Tools->Release Transfer.
It will transfer all the objects under this namespace to the specified SWCV.
For reference plese see the following documents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/18/23078bdbd241f08efb3e36cf10c9d0/frameset.htm
Or else you can select individual objects under the namespace and right click on the object and select Copy Object. You will get a dialog box where you can select the new location where you want to copy this object.

I updated my computer to the os x and now i can't export my videos to quicktime i got the new compressor still won't let me please somebody help

i updated my computer to the os x and now i can't export my videos to quicktime i got the new compressor still won't let me please somebody help

You need to update the software. This is a very old version that will not work with the current OS. Did you purchase the software from the App Store? If do sign in with the Apple ID used to buy it. Go to the Purchases page and find the software.

I can register an OCX file in Windows 7 x64 without incident but with Windows 7 x32 I get a p-up that says "DllRegisterServer failed with error code: 0x80004005. What gives???

Hey yeah. not much else to say. The title says it all.
I'm trying to register an OCX file that my video editing application requires to work properly.
I'm using a Registry (Regsvr32 and Regsvr64) tool to Register DLL/OCX files. Both bit Registry tools work fine. I can Register any DLL or OCX file with Windows 7 x64 and everything goes smoothly.
But, when in Windows 7 x32, again, no problem with merging the Regsvr32 tool, but when I go to register the OCX file message says it was loaded but the DllRegisterServer failed with error: 0x80004005.
Why does everything work in Windows 7 RC 7100 x64 but not in Windows 7 RC 7100 x32???GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

I don't know what happened.
My Video Editing software was working fine a few days ago in Windows 7 x64. Tried using it this morning....couldn't load the .mpg video clip. Just stood there looking stupid like it does in the 32-bit version of Windows 7.
I was hoping the x64 version of Windows 7 RC 7100 was going to make a decent run against my XP Pro SP3 setup. When I was able to register the required .ocx file for the video editing application, I thought "cool". I made a TV recording then used the Video Editor to edit it and it worked fine. Earlier this morinng I made another TV recording, went to go edit it and the video editing application couldn't load the .mpg file at all. This problem just annihilated any chance of me ever purchasing Windows 7, 32 or 64-bit.GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I can not uninstall the newest Muse, the error that i get is: ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group. ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installat

Can somebody please help me, i can not work on my websites anymore. Thanks !!

ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installatie.
MSI Error message: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Third party payload installer Muse_2014_2_CC_LS24.msi failed with exit code: 1603

HT1926 I can't re install iTunes because I get a error saying mobile device could not start.

I can't re-install iTunes because i get an error saying Mobile Device could not start?

Same here TC, very annoying

Page group export failes with error

When i try to export a pagee group, it fails with the following error:
[22-SEP-08 11:43:30][Error: (WWU-74554)] context = wwutl_api_export_provider.start_export user = ORCLADMIN An unexpected error has occurred, which has caused the entire provider export to be rolled back.

I just tried this on a 9.0.2.2.14 version and was able to add, delete, and add again witout an error. It is possible that there was some kind of error during the delete which caused a row in the DB to remain. Unfortunately, there is no way to be sure without delving into the tables and looking for the 'deleted' page group. Not recommended unless absolutely critical. Given that the display name is what is typically shown in most screens, is it reasonable for you to name the new one X1 with a display name of X? If so, that's the safest bet.

Wrapper.createfile failed with error 3: The system can't find this path

Hi,
I have a problem of installing Java on my computer. I saw the error which is "wrapper.createfile failed with error 3: The system can't find this path specified."
I searched a lot of sites to solve it, but i havent found. How do I solve it ?
Thanks...

Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Time Machine backups to OS X Server intermittently failing with error 21

I have a Mac Mini running OS X Server, with two USB drives connected and selected within OS X Server as Time Machine backup destinations. I have an iMac and a Macbook Air, both of which are using Time Machine to backup themselves up to the Time Machine Service on the server (all are running the latest version of Mavericks).
Intermittently, the iMac backup fails. The iMac's console log shows:
Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Waiting 60 seconds and trying again.
Aug 23 13:56:06 Nigels-iMac.local mds[72]: (Normal) Volume: volume:0x7fa702995000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Backups-1
Aug 23 13:56:45 Nigels-iMac.local com.apple.backupd[15418]: Network destination already mounted at: /Volumes/Backups-1
Aug 23 13:57:29 Nigels-iMac.local com.apple.backupd[15418]: Quota in effect for '/Volumes/Backups-1': Zero KB
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Giving up after 3 retries.
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Backup failed with error 21: 21
The Mac Mini console log shows nothing apparently wrong.
Restarting the server (not the iMac) clears the problem and the iMac will then once again backup to the server for some time (e.g. a day).
There are two USB drives, one for each backup sparse bundle and although the two disks have different names in the Finder, OS X Server has named them both Backup (one is shown as 'Backup' and the other as 'Backup-1' in the Time Machine Services Backups tab).
I am wondering whether the failure occurs when coincidentally the iMac and the Macbook both try to back up at the same moment. Any advice about how to isolate the problem, or a solution would be gratefully received!

1. This procedure is a diagnostic test, to be carried out on the server. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Encoding failed with error -43

I push "burn" and the error message: "Encoding of (file name.mov) failed with error -43" pops up immediately upon beginning the encode phase.
This just started today...can't figure out what is different from yesterday...I am importing 16x9 anamorphic Quicktime files (audio and video, directly exported from Final Cut Pro and re-formatted for aspect ratio through QTPro. No menu, no jumps, nothing but video/audio with "first Start" in the track (set for 16x9 letterbox display mode)...
any suggestions? I am dead in the water...

Welcome to the boards
Try sending the movie to Compressor and encode in there (as m2v and ac3 file) then bring those in

Windows 7 update fails with error 8000FFFF

I've got a Windows 7 x64 installation that I've had for around three months. Everything has been fine and working up until a few weeks ago. When I run Windows Update it finds updates and allows me to select them, but when I run the install it fails with error 8000FFFF. Update used to work, but then suddenly quit.
I've dug through tons of forum and web sites regarding this specific error, but they all of their solutions do nothing to fix my problem. In frustration I decided to put in a spare hard drive and install Windows 7 from scratch. I did that and the first thing I tried to do after logging in was updates and it failed for the same reason (8000FFF).
I have the same situation with a Windows Storage Server 2008 x64 that I have as well. It has been runing for about six months or more and updates were working fine. Then update started failing for the same or some other reason about the same time. On this machine I can start the update and see it report a percentage downloading the update. It gets to about 5 or 6 percent and then fails.
Is there some possible networking issue at play in my situation? I have earlier Windows versions (XP, XP64, Svr 2003 and Svr 2003 R2) and updates work fine on those. I know those are using a different mechanism, but I do not notice any other kind of networking issues from my house to the Internet. I have not changed anything or any settings in my firewall at all. Is there some specific protocol, port or something that has to work prefectly in order for the new Windows update to work?
All of my machines are pretty much Intel based. Win7 box is a Core2Duo on an EVGA 680i motherboard. The servers are Intel Xeons with Intel motherboards, chipsets and nics.
Thanks for any advice and help

Wow, suddenly I have the same bizarre error at 11% of downloading, then error #8000FFFF.
Fix IT, registry keys and SoftwareDistribution folder cleaning, uninstalling previous updates, manual downloading of appropriate updates and attempt do install it and creating/deleting user profiles - don't work at all.
Any new ideas?
Thanks,
Win7 x64 SP1
Package KB2633873 failed to be changed to the Installed state.
Status: 0x8e5e0408.Windows update "Security Update for Windows (KB2633873)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2633873-x64.msu"
Package KB2645640 failed to be changed to the Installed state. Status: 0x8e5e0408.
Windows update "Security Update for Windows (KB2645640)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2645640-x64.msu"

FAILED with error NT_STATUS_NO_SUCH_USER

Setup:
OS X Server 10.3.9. PDC. ALL clients are a combination of XP and W2K. No macs (sadly).
Situation:
Over the last 3 years I've been plagued with this problem. Symptoms include new authentications are not granted access, but existing connections suffer no degradation of service. The simple solution has been to simply go into Server Admin and "Restart Service" on the Windows service. Done and done. However, this can happen anywhere from once a week to (up to) 3 times a day. Even on weekends when (likely) no one is in the building, though some users may not log out of their workstations - let alone shut down.
Troubleshooting:
1) I set the smbd logs to 1 (debug) and at the point of degrading, I only see this:
***** Begin: I changed nothing; I left out nothing ***********************
[2008/04/14 10:54:09, 1] authods.c:opendirectory_authuser(208)
User "bvolz" authenticated successfully with "dsAuthMethodStandard:dsAuthSMBNTKey"
[2008/04/14 10:54:09, 2] authods.c:opendirectory_smb_pwd_checkntlmv1(424)
opendirectorysmb_pwd_checkntlmv1: [-14071]opendirectoryuser_sessionkey
[2008/04/14 10:54:09, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(305)
checkntlmpassword: authentication for user [bvolz] -> [bvolz] -> [bvolz] succeeded
[2008/04/14 10:54:10, 1] /SourceCache/samba/samba-60.5/samba/source/smbd/service.c:close_cnum(841)
volzsql (192.168.0.3) closed connection to service Shared
[2008/04/14 10:54:11, 0] pdbods.c:getrecords(1015)
dsGetRecordEntry error (-14085)odssam_getsampwnam: [-14085]getsam_recordattributes dsRecTypeStandard:Users no account for 'jpiper'!
[2008/04/14 10:54:11, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [jpiper] -> [jpiper] FAILED with error NTSTATUS_NO_SUCHUSER
***** End: I changed nothing; I left out nothing ***********************
2) Recently, I tried to change the default allowed connections per KB Article: http://docs.info.apple.com/article.html?artnum=107899 but that actually only seemed to exacerbate the problem. Today I removed the directories that were added in Netinfo Manager from the KB.
3) I also looked at the nmbd.log and frequently see this, which is equally as troubling:
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:27, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
This type of activity in the log is repeated over and over and over again.
Question:
How do I make it stop? Ok, to be fair, I've searched for the last few years for a solution and I'm not sure why samba is continuing to 'break.' Is there someone here that can enlighten me or poke me in the right direction to why this could be happening? I know little to nothing about samba. I DO know networking, and this could be the issue. The server was handed to me by the previous admin and so to rebuild (the easy solution) isn't so easy because the previous admin didn't document anything he did to build it, like NAT forwarding and such, which, if I don't put back into it, will cause MANY headaches. So, eventually I WILL rebuild from scratch (the time may be nigh), and I think it may fix a misconfiguration, but I fear it will be difficult. This is our production server with no test environment (other than using SuperDuper! to image the drive and play with it over a weekend or something).
Plea:
For help.
Edit: How do I suppress the wiki markup? It's butchering the posted log excerpts. <nowiki></nowiki> doesn't seem to work.

Turns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
Proud to say that since that day (10+ months ago) I've not seen it happen again. whew.

Imaging failed with error 175

We recently updated all of our servers with the new ZDM7NWSP1IR4HP1. We distributed the zenworks update through our zenworks for servers so we downloaded the CPK files. Updates were successful except now we have lost our reimage on next boot functionality on all servers. We get the message "imaging failed with error 175". We downloaded and tried the Zenworks Imaging Driver Update for October 2009. We tried this on one server in our environment that we use for testing purposes. This did not fix the problem.
Can anyone help us? We don't see anything additional on the support site to patch.

Originally Posted by spond
Busytech710,
could you please
1) boot to ZENworks maintenance mode
2) export DEVELOPER_LOG=a
3) perform the imaging task and send me the imglog
spond at novell dot com
Shaun Pond
I will be glad to try this and send you the log. I too tried installing the service pack with winsetup.exe and found that also worked for me as far as making image on next boot work. We really want the CPK method to work as we have so many servers and we were able to update them all in one day versus weeks using winsetup.exe. I'll respond back with info you need as soon as possible.

Can't export to DVD because Quicktime fails with error: 0

Similar Messages

Maybe you are looking for