Can't export to Quicktime: problem with file or disk full (Keynote v3)
I'm getting the same problem mentioned in these posts but the solution does not work for me:
http://discussions.apple.com/thread.jspa?messageID=775355
http://discussions.apple.com/thread.jspa?messageID=1173816
I'm using Keynote 3
I tell a lie, the "check Exit presentation after last slide" option didn't work (it was already checked), but deleting my preference file did.
Similar Messages
-
Can't export to Quicktime: problem with file or disk full
Keynote 2.02 won't export files to quicktime. I've tried every format and even custom ones. I've tried changing destination disks and I've exported to PDF, JPEG, PowerPoint. Only Quicktime (7.02) is having this problem. I've even exported a movie in quicktime to verify that's working. Keynote goes through the motions of compressing the file and then fails at the very end.
PLEASE HELP! I NEED THIS TO WORK AGAIN!Have you tried the remedy posted here?
http://www.keynoteuser.com/news/?p=42 -
Problems with files saving in a quicktime format
I am having a problem with files from several programs in my adobe CS6 Master Collection saving in a quicktime format. I am running a Windows7 PC. It appears to be happening in both photoshop and fireworks from what I can tell. Does anybody have any idea why this is doing it and how to fix it?
Fireworks doesn't save or export in Quicktime format.
-
I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files. -
The full alert is " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features."
This is just started three/four days ago. I need assistance quickly as I can't access any secure sites e.g bank accounts/homepage etc.See [[Could not initialize the browser security component]]
-
why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Mac OS 10.7.4, updating new version Microsoft Office 14.2.7, ERROR "The Installer can’t open the package. There may be a problem with file ownership or permissions."
The Apple Installer version is Version 5.0.1 (537).
When I check the Installer Log, I find only these two messages that I do not understand.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Install's runner tool is not properly configured as a setuid tool.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Unable to create InstallController
I changed all the permissions for all the Microsoft Office Folder users to Read and Write.
Restart, same errorSee:
https://discussions.apple.com/thread/1948155?threadID=1948155&tstart=1
I had identical Installer Log failure notices: I used Houdini to view the invisible files and per Limnos' suggestion cautiously dragged
user > library > preferences > com.apple.installer.plist out of that folder onto my desktop and double-clicked on the .pkg file again and it opened and installed properly.
My Installer now works properly on all .pkg files. -
Can you export a Quick Time REFERENCE file from Final Cut Pro X?
Used to be in FCP-7, you could export your timeline and at the bottom of the Export dialog box, there was a check box where you could check "Make the movie self-contained," which would export a full Quick Time .mov file, or you could UNCHECK that box and FCP would export a Quick Time REFERENCE file (referencing the source media used within the timeline), which you could then bring in to any one of a number of different encoding apps.
I prefer to use Sorenson Squeeze to do my encoding, as it's much, much faster than Compressor and has infinitely more format options (Flash, Windows Media, Real, etc., etc.).
But now, I don't see a way to export a Quick Time Reference file from the Final Cut Pro timeline, er, uh, storyline, er, uh, project.
Anybody know if there's a way to export a Quick Time REFERENCE file (not a full Quick Time .mov)?R&B wrote:
Anybody know if there's a way to export a Quick Time REFERENCE file (not a full Quick Time .mov)?
I do the same thing with Final Cut Express, actually. Only I then open the reference file up in QuickTime Pro and re-export it to an h.264 mp4. I can do that multiple times in the background vs. getting caught up in Final Cut's pathetically non-threaded user interface when it's saving/exporting.
I was going to ask the exact same question here, but you beat me to it. And so far it sounds like the answer is "no" ... :-(
jas -
Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?
Absolutely. Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion). Make sure you check the Self-Contained box. The export will be an exact copy of your Sequence, complete with any filters or other effects you've added. Import the self-contained movie back into the project (or another project) if needed.
-DH -
How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby. -
Problems with File Transfers Over Firewire 800
Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.
-
Hello all,
I am making a simple HttpServlet, which takes input
from html page and saves in to a file, but I'm having a
bit of a problem with file permissions.
I'm getting the following exception
java.security.AccessControlException: access denied (java.io.FilePermission ./data/result read)
java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
java.security.AccessController.checkPermission(AccessController.java:427)
java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
java.lang.SecurityManager.checkRead(SecurityManager.java:871)
java.io.File.exists(File.java:700)
SyksyHTTPServlet.doPost(SyksyHTTPServlet.java:31)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)The exception seems to occur when I'm trying to check whether the file already
exists or not.
The data directory has all permissions (read, write and execute) set for all users,
and I have made an empty file called result inside the data directory for testing.
This file has read and write permissions enabled for all users.
Here's my code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.Enumeration;
import java.util.List;
import java.util.ArrayList;
public class SyksyHTTPServlet extends HttpServlet
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
int totalCount = 0;
List list;
String song = request.getParameter("song");
PrintWriter out = response.getWriter();
File file = new File("./data/result");
if(file.exists()) // this is line 31, which seems to cause the exception
list = readFile(file);
else
file.createNewFile();
list = new ArrayList();
list.add(song);
writeFile(file, list);
for(int i = 0 ; i < list.size() ; i++)
out.println(list.get(i));
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
doPost(request, response);
private List readFile(File file)
List list = null;
try
FileInputStream fis = new FileInputStream(file);
ObjectInputStream ois = new ObjectInputStream(fis);
list = (ArrayList)ois.readObject();
ois.close();
catch(Exception e)
e.printStackTrace();
return list;
private void writeFile(File file, List list)
try
FileOutputStream fos = new FileOutputStream(file);
ObjectOutputStream oos = new ObjectOutputStream(fos);
oos.writeObject(list);
oos.flush();
oos.close();
catch(Exception e)
e.printStackTrace();
}I'm using Tomcat 5.5 on Ubuntu Linux, if that has anything to do with this.
I'll appreciate all help.
kari-mattiHello again.
I'm still having problems with this. I made
a simple servlet that reads from and writes
to text file. The reading part work fine on my
computer, but the writing doesn't, not even
an exception is thrown if the file exists that
I'm trying to write to. If I try to create a new
file I'll get an exception about file permissions.
I also asked a friend of mine to try this same
servlet on his windows computer and it works
as it should.
Here's the code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ReadServlet extends HttpServlet
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
String s = "";
PrintWriter out = response.getWriter();
String docroot = getServletContext().getRealPath( "/" );
out.println("docroot: "+docroot);
File file = new File(docroot+"test.txt");
if(file.exists())
s = readFile(file);
out.println(s);
else
out.println("file not found");
//file.createNewFile(); // causes exception
//out.println("new file created.");
writeFile(file, "written by servlet");
out.println("Now look in the file "+file.getPath());
out.println("and see if it contains text 'written by servlet'");
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
doPost(request, response);
private String readFile(File file)
FileInputStream fis = null;
BufferedInputStream bis = null;
DataInputStream dis = null;
String s = "";
try
fis = new FileInputStream(file);
bis = new BufferedInputStream(fis);
dis = new DataInputStream(bis);
s = dis.readLine();
fis.close();
bis.close();
dis.close();
catch(Exception e)
e.printStackTrace();
return s;
private void writeFile(File file, String s)
FileOutputStream fos = null;
BufferedOutputStream bos = null;
DataOutputStream dos = null;
try
fos = new FileOutputStream(file);
bos = new BufferedOutputStream(fos);
dos = new DataOutputStream(bos);
dos.writeChars(s);
fos.flush();
bos.flush();
dos.flush();
fos.close();
bos.close();
dos.close();
catch(Exception e)
e.printStackTrace();
}And if someone wants to test this servlet I can
give a war package.
Any advices?
kari-matti -
Problem with File Content Conversion
Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PMYou will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ -
One of the desktops on my macbook 2007 steel case will not open.
The message i get on screen at login is that there is a problem with file vault.
my dissertation is on that desktop.
all other desktops/user accounts are unaffected and i have admin permissions on them
i recently upgraded to osx 10.9.4
how can i get back in?
chaiman 22If you restored the account to which the FileVault protected Home folder belonged, then you need to log into that account and enable FileVault.
If you just need access to the data in the FV protected Home folder, then locate the sparsebundle disc image file that contains the encrypted folder. Double-click on it as if to mount it. You will then need to enter the FV password associated with the account to gain access (this is NOT the admin nor login password.) -
Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandraHi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth
Maybe you are looking for
-
Software Update not finding missing loops
I've just updated my MacBook Pro (OS X 10.6.8) from iLife 09 to iLife 11. In Garageband most of the loops are missing (greyed out). When I click on one I'm given the option of downloading later or now. When I choose 'now' it opens Software Update whi
-
I have my Photoshop CS6 Serial number and thought it would be easy to re-install software. Message says my serial number is VALID but not for this version of software. Any help with re-installing Adobe Photoshop CS6 on same computer after doing a Win
-
3 Decimal place values for Amount Key Figure
Hi Experts, I have created an ODS in BI 7.0. This has a amount key figure which is getting calculated by a routine. Now The value that is getting calculated is getting stored into the ODS with only two decimal places. For example if the value that is
-
How do I add $$ to my iTunes ID account without adding a monthly automatic deposit?
How do I add $$ to my iTunes ID account without adding a monthly automatic deposit?
-
How can I restore my windows vista backup in my new imac?
I Have bought the new iMac 21.5 29ghz and would like to rrestore my old pc backup in vista. Can anyone help?