Can't export to .SWF when I could do it before?

Hello everyone,
My Dashboard was working perfectly fine until I binded colors to my graphs. After that, Xcelsius does not allow me to export to .SWF and I get the following message:
"Could not generate the Flash file (SWF); the cause is not known. Try again. If the problem persists, contact your customer support representative."
Someone please help me
Fernando

What worked for me was the following:
1- Reducing formula ranges. Example: I had an Index/Match combination where my ranges where set to 1000. I reduced them depending on my number of lines. If the lines with data where 500, I would reduce the range of my formula from 1000 to 510. For those lines that were around 1000 I would kept the range the same.
2-Restarted my computer. Sometimes the error would prompt up and sometimes it wouldn't after restarting.
The third solution is what has caused me null problems:
3-Simply click on the canvas and then export. I noticed that if I was placed in a cell in excel it would cause me the error.
Best,
Fernando

Similar Messages

  • Can you export a SWF in photoshop CS5 or CS6?

    I have a client that has provided me SWF files that swear were exported from Photoshop, I know that this could be done in earlier versions. if so then how can this be done in CS5 or CS6. I have access to both.

    To my knowledge, the ability to export as .swf was removed after CS3. Do you know what version of Photoshop your client was using?
    Here are some past threads regarding this topic:
    http://forums.adobe.com/message/2986280?tstart=0
    http://forums.adobe.com/message/4897912#4897912
    http://forums.adobe.com/message/3239504#3239504
    http://forums.adobe.com/message/2512325#2512325
    You might also find some additional information by asking around the Photoshop General Discussion.
    Cheers!
    Kendall

  • Can't export simple swf file.

    Hi, I just started working with after effects so im rly new at this and looking for some help with it.
    I made simple animation text and 2 png files as background. When I try to export it, after 2 frames program stops and I get saved file but i cant open it ( so i guess its broken )
    Please help me with that.

    Ok, i fixed it. Changed to interlaced RGB 8bit files and thats ok.
    BUT
    Now exporting stops at 43frame... Here is my exported banner
    http://gubex.pl/grafika/tanita_bannerr.htm
    Now im getting
    Name - Unsupported Feature
    0:00:00:00
    1: Shape Layer 1 - Shape Layer
    Every 1 seccond...
    Any idea what's wrong ?
    edit:
    Well, i deleted Shape 1, and now we're back to the start, again export crashes at 2nd frame...
    If u could help me with next question, that would be very helpful.
    How can i link swf file as webbanner?
    Thank's in advence.

  • Can not export as swf, can not test movie

    Everything was working fine, then one day, it just stopped
    exporting my document. If i try to "test movie", as it is
    "exporting movie" it just stops half way, same thing when i try to
    export it as a swf. If i try to do this 2 times in a row, the
    application just closes. Please help me, I finally finished my
    site, and now I cant export it. Thanks

    if you can't publish your fla, try removing 1/2 the library
    items and retry. if that fails remove the other 1/2 of library
    items. see if the problem is in your library and try and pinpoint
    it.

  • Can't export photos from iPhoto09, always could in the past.

    I've used iPhoto '09 without incident for years, but now, when trying to export pictures to a flash drive (or to my desktop as a test), iPhoto immediately quits, leaving a long error message. I've recently upgraded this machine to OS10.9.2, but have been able to do this procedure after the upgrade. I'm stuck!

    iPhoto 8.1.2 is marginally compatible with Mavericks.  See my Note 1 below:
    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
    I recommend you purchase iPhoto 9.5.1 from the App Store to get complete compatibility with Mavericks.
    That being said: as a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?
    OT

  • What is error code =-50?  how can I export my project when this error arrives?

    what is error code=-50?  How can I resolve this issue to be able to burn my project to a disc?
    Thanks!

    Hello Russ,
    I have FPC X 10.1.3 and Yosemite. Thanks for your concern but i solved my problem. I created new library and copied event in new library.
    Everything is back to normal now. The share button lives again.
    kindest regards

  • .docx no longer opening on my iPad air, when I could open them before?

    i Have had .docx file types sent to me as recent as September 2014, which I could open simply by tapping on the attachment. Now October 2014, they will not open? Why? can this by changed back to all me to open the .docx which I have attached to mail in my emails, pls?

    It should still be working for you. Try some basic troubleshooting. Close all apps and reset your iPad.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

  • Export as .swf missing in Photoshop Issue

    I'm from Chicago, At my home computer I have both Photoshop CS4 & CS5 (Both Extended Editions) for work, while at my home computer I was able to make animations in Photoshop, and simply create a .swf file by file >> Export as .swf
    I'm currently in New York City for an internship, and they also have both PSCS4 & CS5 (Both Extended), but the problem is creating animations via Photoshop there is no Export as .swf
    I've spent the last 6 houts literally researching this issue, and have only found topics dating back to CS2 & ImageReady when I'm positive that I've done this on my home computer. If there is anyway I can get this computer in New York to export as .swf IN Photoshopshop could someone please steer me in the right direction, I'd me most grateful. Thanks alot.

    As Silkrooster said, this may depend on the Quicktime SWF  export component. However, it only existed in CS3 and before and then Appple and Adobe pulled the plug on it in mutual agreement. It is not part of QT 7, but of course you may obtain it by installing older QT versions (I think it was last seen in 6.1). Other than that, the "good" way to create SWFs is to use Flash Catalyst that comes with every CS5 suite...
    Mylenium

  • I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times.

    I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times. What do I do?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • Flash CS 5.5 - best settings when exporting to .swf to reach widest audience?

    Hi Flash experts!
    I am a 2D illustrator and am relatively new to Flash (and love it!) and want to add some simple Flash animations (using my illustration) to my portfolio website. But I am having issues when exporting to .swf - I have emailed on examples of work to friends and colleagues to view (and check) and most have trouble opening the .swf files. In fact most can't open them at all! Is this more to do with your average (probably a pc user) person not having an up to date Flash player or to do with my settings when exporting?
    Can anyone advise me on how to best export to .swf to ensure the majority of people can open and play the file? Is this a problem just for a newby like me or a wider issue you Flash superstars deal with?
    Eagerly awaiting your advice!
    Thanks,
    Lisa in New Zealand.

    It may just be that they do not have a standalone Flash player to play the file.  Your better bet is to plant the swf on a web page and send the link to the page instead of the file(s).

  • How can I export a video that will loop indefinitely when played from a usb drive?

    how can I export a video that will loop indefinitely when played from a usb drive?

    As far as I know, PPro does not have that capability
    If you were creating a DVD in Encore, you could put an "end action" on the video timeline to itself... so at the end of the DVD video it would go back to the beginning
    I am not aware of any way to do that for a simple file

  • When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?

    When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
    I've tried rebuilding the thumbnail database, but that hasn't helped.

    What version of iPhoto and system are you running?
    Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left.  Does that let more than one photo display in the window?
    OT

  • I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    SSign in to the App Store using the Apple ID that was used to purchase the software.

  • I can't open iTunes. When I do it says "The iTunes application could not be opened. An unknown error occured (13014)."

    I can't open iTunes. When I do it says "The iTunes application could not be opened. An unknown error occured (13014)."
    How can I get rid of this error message and open iTunes?

    are you running any anti virus software on your machine ?

  • How come I can't access itunes when I could  yesterday?

    How come I can't access itunes when i could yesterday?  When I hooked up my iphone to sync it asked me to reset phone to factory settings!  I don't think so!  Then when I tried to download update it won't do it.

    On my iPod touch I don't have a spotlight search icon or option available. Also under my settings and general there is no "restriction" options or settings. I reset the iPod several times and that doesn't work.
    The thing is the music that is on my iPod is not all in my iTunes library so I can never sync automatically. Also if i restore to factory settings then it will erase what i have on my iPod and not in my library. I always manually add songs. When I plug in my iPod and i go under Summary...the only other tabs are music, tv shows, photos and info. There is no Apps tab. When i plug in my iPhone i do get the apps tab.
    I got my iTouch awhile ago....is it possible that this is why i can't get apps?? I got the iTouch back in 2008.
    Ughhh this is so frustrating. I just want to get this one app on my iPod Touch. Please help!!

Maybe you are looking for

  • Urgent : How to upload a tif file without using upload element

    could someone please tell me how to upload a tif file(any file) without using upload element. Function Module GUI_UPLOAD does not work. Please suggest. Appreciate your suggestions.

  • Error while while reading mails

    Hi, I'm getting the following error while I'm trying to read mails from server where POP3 is enabled. Could anyone please let me know how I can fix it? Exception in thread "main" javax.mail.AuthenticationFailedException: The request ed mailbox is not

  • Pool creation issues

    Environment: 2 RD Web Access servers 2012 R2 2 RD Connection Brokers 2012 R2 (who are also RD Licensing servers) 6 RD Virtualization Hosts 2012 R2 When creating a new pool from a newly created master image (sysprep done), I am getting a bunch of the

  • My "pictures" in the movie have text-I want them to scroll slowly from upside to downside-

    My "pictures" in the movie have text- I want the pictures slowly scroll over from upside to downside so that one is able to read the text. I made this happen before in an other I movie project, but I don't remember HOW!!!! Who is able to help?

  • Why should texture size be less than power of 2?

    Hi! I just read in the packagerforiphone_devguide.pdf Make bitmaps in sizes that are close to, but less than, 2^n by 2^m bits. The dimensions do not have to be power of 2, but they should be close to a power of 2, without being larger. For example, a