Can't Export to tape with CS4 and Canon XL2

I can capture just fine from my XL2 but I can't export out to tape.  It doesn't set the camera up as a playback monitor.  How can I remedy this situation?  Is there a setting I am missing?

Make sure External Device under Export is enabled in the Playback Settings of the Program monitor.
See the picture below.

Similar Messages

  • Can I export to tape with 4 audio channels

    I am editing a short piece in PP CS3 for a TV station who require delivery by tape (I'm proposing to use mini-DVCAM). Part of their audio requirements are that program audio be on tracks 1 & 2, with Music and effects on tracks 3 & 4.
    Is it possible to deliver this as one file (video plus 4 audio tracks) or will I need to deliver either 3 files (video plus 2 seperate stereo audio files) or 5 files( video plus 4 individual mono audio files)? The last two options seem a little unprofessional, requiring them to recompile the final product.

    No, yes.

  • How can I export to tape in CS4 without a glitch?

    When I export an edited video file to tape, I always get one glitch (i.e., one second delay at some point in the tape) in a one-hour video.  This happens regardless of the video editor or the camcorder. I have discovered that it happens hourly, within the second. Therefore, I have surmised that something is running in the background that is pulsing the system hourly.  Accordingly, I have disabled the internet, the virus protector, the automatic software updaters, the scheduled tasks, and the startup routines.  These actions have not solved the problem.  Does anyone have any other suggestions?

    There are many weird and wonderful ways for Windows to auto-start software... not all of them are visible in the "regular" places
    Utilities http://windowssecrets.com/comp/110106 (Startup Solutions) may help

  • Can I take a frame from my project and use it as a custom menu background with CS4 and its Encore

    My project is edited in CS4.
    I moved it to Encore CS4.
    I don't want to use any of the supplied menu templates in CS4 Encore.
    I was hoping CS4 would be all I needed to create custom menus using scenes from my project.
    My question is: Can I take a frame from my project and use it as a custom menu background with CS4 and its built in Encore or do I need some other element from the Adobe catalog to make these custom chapter menus and sub-menus?
    Thanks Jim

    OK, I'm back. Here are my steps for creating Custom Menus with PS, En and PrPro:
    In PrPro, move the CTI (Current Time Indicator) to the desired Frame. Check Frames on either side, with the Program Monitor’s Magnification to 100%, or maybe even 200% (you’ll need to scroll, but get a really clear picture). You want the clearest Frame in that area. With AME, in CS4, you’ll want to Export that Frame as .TIFF, or .BMP. I use .TIFF for this.
    Now, for a caveat. When you Import this Exported Frame into Photoshop, be sure to check the specs., especially the PAR. You may have to use Image>PAR to adjust this to match your Project’s specs. Or, all might be perfect - just check this out.
    Now, at this point, I choose the Library Menu, Blank, so that everything is setup. One can create the Menu from scratch, but careful attention needs to be paid to the exact naming conventions. At the very least, unless you’ve done this dozens of times before, use that Blank Menu, or similar as a guide, so you get things done, as they must be done.
    Using that Blank Menu, just drag the Layer from your Exported Frame to your Menu image. It will appear above the black Background.
    Add, or manipulate your Button Layer Sets, as is required, keeping them together. Remember that Button #1 will be the Button Layer Set, that is lower down in the Layers Palette. This can play a roll with Button Routing, back in Encore. Lower Button Layer Sets will have lower Button numbers.
    Now, I always rename my Button Layer Sets, keeping the required characters - just changing the name. I also do all of my Button text in PS, and make sure to turn OFF Sync Button Names.
    When done, Save_As .PSD, and then Import_As_Menu into Encore. Note: if you start with the Blank Menu, you can choose Edit in Photoshop, and then when done in PS, you just need to Save, and it will update in Encore. This is a personal workflow choice. I do the Edit in Photoshop route, but it is not necessary. One just needs to Import the resulting .PSD into Encore with Import_As_Menu, so that Encore does all the things that it needs to and recognizes the .PSD as a Menu.
    When deciding what to base your Menu on, remember that you can "populate" your Menu with Buttons from the Functional Content. I’d suggest studying these Assets, and picking the ones that work best for you. You can still alter/edit those back in PS, so you just need to "get close."
    Pay special attention to the required naming conventions. You cannot deviate from those first characters in the Button Layer Sets. They MUST be followed.
    If you have any questions, do not hesitate to ask.
    Good luck,
    Hunt

  • I'm trying to replace a missing font and apparently it's a graphic.  It's not letting me replace with another font and click change.  I can't export until it's fixed and I need to fix / bypass as soon as possible.

    I'm trying to replace a missing font and apparently it's a graphic.  It's not letting me replace with another font and click change.  I can't export until it's fixed and I need to fix / bypass as soon as possible.

    Go find the graphic in question, and open it in its native program. The problem will have to be fixed there.

  • Cannot export to tape from CS4

    I have PPro CS4 connected by firewire to either a Canon HV 30 MiniDV camera or a Sony GV-D1000 Mini DV deck.  (I've tried both).
    I am trying to export my project to MiniDV tape.  I have succeeded in the past but for some reason now can't do it.
    I select "Export to tape" in PPro and all seem to go smoothly, the device being controlled from the PPro device controller and the tape starting to roll.  It's just that no image appears in the screen on the HV30 or GV-D1000, and nothing is recorded.  I am following the instructions for each device regarding recording via this method.  It just seems no data is being sent from the PC to the device.
    Options in Edit - Preferences - Device Control are set for the approrpriate PAL system and device.
    I can record from the device onto my PC using the same firewire port and cable.
    I'm using Windows 7.
    12Gb RAM
    i7 chip
    ATI Radeon HD5870 graphics card
    Can anyone help, please?

    Thanks again, Ann, but as mentioned in my "Dropping frames during capture" thread, this has already been tried and failed.
    The following things have been tried and have all failed to prevent, roughly every minute or so during capture or export, two or three seconds of interference which results in lots of dropped frames during capture or a blank screen during export:
    Different firewire cables
    Different programs:  PPro CS4; Pr Elements 9, Windows Live Movie Maker
    Capturing to different hard discs
    Capturing to external hard disc
    Closing every non-essential process
    Detaching every non-essential peripheral
    Switching off all other electronic devices in that part of the house, phone included
    Capturing from/exporting to different devices from different makers
    Changing the firewire driver
    I think it's either the firewire driver on Windows 64 bit, (althouhg I've treid changing it) or a problem with the graphics card.
    The firewire slot is not in a card by itself, but part of a panel of many slots and plugholes at the back of my PC - USBs, minijacks, firewire etc  I have no further slots available for a separate firewire card.
    The only solution I can see is to save the project as a huge AVI file, transfer that to my lap top, make a movie out of it with Windows Live Movie Maker, and export from there.

  • Exporting h.264 with CS4 vs CS3

    Maybe I'm just dumb and this is an easy question....I'm not sure, but here goes:
    I had a project in Premiere Pro CS3, a music video. I'm used to exporting videos as quicktime with an h.264 codec for online streaming from CS3, and they always looked great. A lot of websites cap video uploads to 500MB or a gig, so it was a perfect way to get a high quality video on the net. The 3 minute music video I was working on became a great looking 450MB h.264 movie.
    With CS4 and the adobe media encoder, things are a bit different. I export as a quicktime movie with the h.264 codec, at the same settings (100% quality) but it looks awful. The same music video was around 80MB and didn't look anywhere near the quality of same video exported from CS3. I've tried a number of options and presets, and havn't been able to get the same quality or size file.
    I even checked both files in G-Spot codec reader (great tool) and they were the exact same AVC1-h.264 codec.
    What is happening here? Is the codec somehow used differently in CS4 than in CS3? Is there something I'm not doing to get a high quality h.264 movie out of CS4?
    Thanks,
    Peter

    The bitrate of your output movie depends on your Export Settings. At the bottom of the Preset list is "Edit Export Settings". There you can adjust all the settings just like CS3.

  • How can I export a video with audio from premiere cs 5.5 to a DVD

    how can I export a video with audio from premiere cs 5.5 to a DVD

    You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • How is the best way to export my project with clips and videos?

    I would like to save my project and export the project with clips and videos included. What is the best way to do it?

    Can you clarify:
    clips and video
    Seems as though you want to retain the original media?
    Export as a Master File to get a good quality export file of your Timeline.
    Al

  • How can I export a file with transparent background?

    Hi all,
    I know InDesign doesn't allow to export a PNG file, but I need my file to be in image file format with transparent background.
    I'm still learning so I am stuck here. How can I export a file with transparent background?

    If you can't get the PNG file export to work, you can export a pdf and open it in Photoshop, from there you can save it as whatever you like.

  • TS2446 Can sign in to accts with ID and password   When I try to ed out. app I'd disabled comes up. I've tried every thing suggested help

    Can sign in to accts with ID and password   When I try to install app Id disabled comes up. I've tried every thing suggested help

    What id shows in Settings > iTunes & App Store ? If it's the old one then tap on it and log out of it and then log in with the updated version

  • Can I upgrade from CS2 to CS4 and skip CS3?

    Can I upgrade from CS2 to CS4 and skip CS3? It would save me time.

    Colin,
    >But I did exactly what everyone on here said they did, went onto adobe.com to do our research, saw that the upgrade works from CS2-CS4
    Adobe shows there are multiple versions of the suites on their site and clearly points the way for purchasing at the Adobe Store. Just for the heck of it, I also went to MacMall.com and MacConnection.com, two well-known online resellers. I checked their Adobe CS4 upgrades, and they clearly indicate which older versions they are meant to go with. Not quite so clear from MacZone.com and a few other reseller sites I visited.
    >I am an IT person for a printing company, and as such I spent hours upon hours preparing for this transition.
    It took me just a few minutes to find the correct version I needed.
    >no one can tell the difference, and most vendors don't know it exists. We could help you, but you didn't buy it from us."
    Maybe the reseller you bought from is just sloppy and didn't mark the SKUs properly. But how is this Adobe's fault -- particularly when other vendors can and DO get it right?
    Also as both Mac and Win upgrades are pretty much determined and marketed the same way, what does this sloppiness have to do with Mac market share?
    But that said, there is enough good information on the Adobe site that should trigger some questions if you as the IT guy have any doubts and are responsible for buying for your company. At the least, doesn't it make sense to call Adobe and ask which SKUs you should buy? It could've saved hours of research time.
    If you truly did your research and purchasing carefully and were still fooled, I suggest you start with a complaint to the reseller who sold you the goods.
    Neil

  • How Can I Export A Table With Its Entries ( values )

    Hi guys,
    How can i export a table with the entries that the table is populated with ??!!
    Best Regards,
    Fateh

    To export a table and its data you can do it a number of ways.. Do you have access to SQL Developer? If not you can do it through the APEX SQL Workshop..
    Under SQL Workshop, Utilities, Data Unload, To text (or XML, whichever you are more comfortable with..).. Select your schema, click next button, select the table, click next, select the columns you want exported (select ALL ITEMS in the select List), click next, on optionally enclosed by I usually enter a " (Sometimes I have long strings in columns), click the include column names checkbox to get the column names at the top of the document, click unload data button..
    To get the ddl (code to build table) Sql Workshop, utilities, generate ddl, create script, select schema, select next, click table checkbox, select next, click the checkbox of table you want to get ddl for...
    Thank you,
    Tony Miller
    Webster, TX
    There are two kinds of pedestrians -- the quick and the dead.
    If this question is answered, please mark the thread as closed and assign points where earned..

  • Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick

    Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick
    THE use of the apple support is a mess also.
    I want to be able to use my MAC fully and easily like I used to with Snow Leopard. 
    What is wrong with this maverick OS?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

    Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

    Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
    Has it returned to normal for you?

Maybe you are looking for