Can`t export to tape

When I try to export to tape the start dialog box appears after some minutes and nothing else happends
what is wrong, it is no problem when capture
It also appears a dialogbox Premiere runs at low memory ,is these two problems related?

Yes.
For the rest look here and read carefully, inluding all the included links and report back with at least all 16 questions answered: Some suggestions

Similar Messages

Can't export to tape on Premier Pro CS4 Extended

When I attempt to export to tape from Premier Pro CS4 Extended, version 4.1.0, to a DV Cam, the tape rolls and records (with device control) but I get no video or audio.
I have:
-selected the timeline for the sequence
-the work area bar is over the entire sequence
-I’ve made sure the tape is record enabled
-I have tried two DV cameras, and three fire wire cords
-I am able to capture video into the computer using all of the above
-I’ve tried moving my project from my external hard drive to my internal one
Still no export…….
Any ideas why?
-I am using a Dell computer with:
            - Windows XP Professional 2002 Service pack 3
            - Intel[R] Core [TM]2 Quad CPU
            -Q9450 @ 2.66JHz
            -2/66 GHz, 3.25 GB of RAM
            -Physical Address Extension
            -Unfortunately I can not find the name of my video card but this computer was built specifically to edit video so I am sure it has one.

Make sure External Device under Export is enabled in the Playback Settings of the Program monitor.
See the picture below.

Can't export to tape...HELP PLEASE

Hi,
I can't seem to export my sequence to tape on my Sony DCR-PC8E PAL camcorder.
I select select File -> export -> export to tape
It says it is ready; starts the camera recording automatically; but the camcorder screen remains blue and no signal is recorded.
The camcorder says 'DV IN' on the screen.
Sending a sequence to tape from windows movie maker works fine.
Capturing from tape works fine.
Anyone got any ideas on how to make this work?
Thanks D.

Solved
You have to change the playback settings in the sequence settings for each sequence.

Can't Export to tape with CS4 and Canon XL2

I can capture just fine from my XL2 but I can't export out to tape. It doesn't set the camera up as a playback monitor. How can I remedy this situation? Is there a setting I am missing?

Make sure External Device under Export is enabled in the Playback Settings of the Program monitor.
See the picture below.

Can't export to tape ! Help !

Hi,
I'm having some trouble exporting an HDV sequence back out to tape from Premiere Pro CC.
I click on "File > Export > To Tape".
Then the "render and record" window pops up.
I click ok, but instead of the render line coming up and then recording, it just jumps to the "Transcoding to HDV" box, and almost instantly just returns to the "Render and record" one without doing anything.
And when I try to export a DV sequence, the VCR starts recording but received neither picture nor sound from PC.
Import works normally !
The problem is the same regardless of the recording device: Camcorder Canon HV20 and XHA1, or VCR Sony M25 .
Curiously, a few weeks ago, export was ok.
I don't understand !!!
With Premiere Pro CS6, everything is ok, both import AND export.
Has anyone experienced something like this before ?
Thanks in advance for your help !

Same problem here, double checked on another system with Adobe Premiere CS6 export works fine.
The same project settings / sequence settings (HDV 1440x1080@50i in Premiere CC and unable to export to Sony HDV deck. It starts rendering and writing but image stays black.
Using an other NLE software on the same system exports normally, so the firewirecard / deck and connections are fine.
Device control is the same as in CS6, disabled mercury engine (problem in the past)
Any idea would be appriciated

Can't export to tape - Premiere Pro CS3

I'm using Vista 64 bit and haven't noticed other problems. The file is not HD.
Export to Tape is grayed out in Premiere and other programs. Should I be able do the export even so, if everything is set up right? I'm going through a Sony DSR-11 to VHS. I set the DSR-11 to record (with no tape in it) as well as the VCR. When I put in a VHS tape with video on it, it shows up on TV, but when I try to come in from Premiere, the screen is blue and shows the time elapsed if I play the blank tape or try to record on it. And nothing gets recorded.

Basically what you are doing is a D-A (Digital to Analog) passthru with your Sony, right? I'm not familiar with that camera, but if the manual does not cover D-A operation, you might try placing a blank tape in the camera. If that has no effect, you might try placing the camera in Play Mode. Different cameras behave differently. That's why I mentioned the manual. It *might* have instructions for doing the passthrough operation, though more often, one is doing an A-D passthrough.
Also, does this camera offer passthrough? Many UK/Euro models have this feature disabled, an a lot of mfgr's are omitting it entirely.
Good luck, and please let us know if you find the exact scheme to do the direct D-A transfer.
Hunt
PS One could record to miniDV tape, and then Play to the VHS recorder. Downside - uses a tape and takes twice as long, but might get you to the VHS in less time than tracking down the exact sequence to do it via passthrough.

Help! Deck rental ends Monday, and I can not export to tape...

I am trying to export my movie to tape from FCP to the sony dsr-1500. I started to export, and made the mistake of stopping to go back and see if it worked. Now I have time code on about 3 minutes of tape, and the deck will no longer record on the tape. How can I erase\fix the time code issue, so that I can record to this DVCAM tape? Thanks.

Frankie,
It is nit true that you cannot control the DSR1500 from within FCP.
It can be done over FireWire and over RS422.
For the latter you'll need extra hardware, so let's asume you don't have that. Then you'll will have FireWire-control left.
I suppose the video Signal goes from FCP to the deck over FireWire?
Then check ON THE DECK: (and see what happens in the deck's display)
MENU button.
Tap UP or DOWN, until you see SETUP MENU.
TAP Right Arrow once to select this setup menu.
Tap Up or DOWN, Until you see INTERFACE
TAP Right Arrow once to select this INTERFACE menu.
Tap Up or DOWN, Until you see REMOTE I/F
TAP Right Arrow once to select this Remote menu.
Tap Up or DOWN, Until you see i.LINK
now press SAVE.
Set the deck to REMOTE with the switch top-right.
FCP now can control your deck.
Go to FCP
Select the sequence.
Remove in and out points
Go to File > Edit to Tape
Go to the Mastering-tab
Under LEADER:Choose Colorbars and black that you want to have before your program.
(Use the checkboxes. and fill in the amount of seconds).
I'd advice to at least have 1 minute of color bars/black before the start of your program.
Under MEDIA select ENTIRE MEDIA
UNDER TRAILER check the checkbox and select at least 10 seconds of black
Go to the Device Settings tab. Choose the right Device control FireWire NTSC I suppose, because you live in USA right?
Now go to the VIDEO tab.
Rewind your tape
Look on the deck what the timecode is of the first frame,
Now in the lower left corner of the EdittoTape window fill in a TC that is 10 seconds higher that the start TC of the tape.
In the top-middle of the Edit to Tape window choose MASTERING (not editing)
NOW find your sequence in your browser and pick it up and drag it over the video part of the edit to tape window. Keep mouse down until you have the mouse over the ASSEMBLE part. Release the mouse. Let FCP render if needed and press OK to start when it is asking if you are ready.
Well. Is this working?
And if not. Tell us exactly what went wrong and in what step.
NB: On the deck menu it could be that you can't find the right settings. Look for ADVANCED menu then. You might be in Basic menu...
Rienk

How can I export to tape in CS4 without a glitch?

When I export an edited video file to tape, I always get one glitch (i.e., one second delay at some point in the tape) in a one-hour video. This happens regardless of the video editor or the camcorder. I have discovered that it happens hourly, within the second. Therefore, I have surmised that something is running in the background that is pulsing the system hourly. Accordingly, I have disabled the internet, the virus protector, the automatic software updaters, the scheduled tasks, and the startup routines. These actions have not solved the problem. Does anyone have any other suggestions?

There are many weird and wonderful ways for Windows to auto-start software... not all of them are visible in the "regular" places
Utilities http://windowssecrets.com/comp/110106 (Startup Solutions) may help

Can I export to tape with 4 audio channels

I am editing a short piece in PP CS3 for a TV station who require delivery by tape (I'm proposing to use mini-DVCAM). Part of their audio requirements are that program audio be on tracks 1 & 2, with Music and effects on tracks 3 & 4.
Is it possible to deliver this as one file (video plus 4 audio tracks) or will I need to deliver either 3 files (video plus 2 seperate stereo audio files) or 5 files( video plus 4 individual mono audio files)? The last two options seem a little unprofessional, requiring them to recompile the final product.

No, yes.

Can't export to DV tape

Hi there
I have a G5 PowerMac, 3 years old, and a Cannon XM2, 3 years old.
I have a question I hope a 3 year old can answer...
I can import from my camera - so it's connected fine, but I can't export to tape - it boots me out. iMovie just dissapears and I get the option of sending a gobbledy gook 'report', but that's it.
Strange. Don't remember having this problem before - is there a setting I need to change? On my camera perhaps? Or in iMovie? I just don't get why I can import but not export.
many thanks
Rich
Power Mac G5 Mac OS X (10.4.9)

If your problem is not a communications problem between Mac and the camcorder, it is likely the problem is related to your system being too slow to deal with the high data rate of exporting. Try exporting a few second video with no titles and no extra sound tracks for testing purposes. I am assuming that your camcorder moves the tape when exporting and that you just get a blank screen when you play back. If you have what appears to be a blank video recording, play it back again but this time push pause and see whether you see a still frame? Wish you luck.
I had experienced two circumstances that caused your problem, especially when I had multiple soundtracks and effects. Apple support was no help when I struggled to fix this problem and I found solutions below.
1) I used an external Firewire drive that was PC formatted. I reformatted the drive to MacOS and the problem went away.
2) I used an Firewire external drive that was too slow where I stored my iMovie project. I could capture and create DVDs just fine, but the bit rate was too slow to export to my Firewire camcorder. (Is your hard drive 7200rpm, not something slower?) Do you have any background applications running slowing down iMovie operation?
3) Have you disconnected your camcorder from your computer and turned it off. Also have you shut down your iMac, not just rebooting, then started it from scratch and then connected your camcorder? Also try plugging in your powered up Firewire camcorder before starting iMovie. It turned out to be a miscommunications with one camcorder under certain conditions.
4) In Sony camcorders in the menu system there is a item "A/V to DV out". Try turning that off if you have it.
Ed

Premiere CS 5.0.3 problem export to tape via firewire

hi
My problem is that i can't able to export a sequence into a tape dv by firewire
I use premiere cs5.0.3, matrox rtx2hd, win 7 and a sony hvr-M15J
I've not problem to IMPORT tape from a matrox sequence neither from a premiere sequence but I CAN'T export to tape (i use firewire connecting my hvr-15j to matrox rtx2)
My workflow
I create a premiere sequence, the device control is online, in sequence setting>Playback setting i set DV 25i (720 x 576) but when i start to export to tape my sony hvr start to rec, timecode going on but it's all black and no audio
i try different setting in playback setting but nothing change, what's the problem?
Device control is online but maybe i have to change setting ofsony hvr-M15j ? The strange thing is that I've not problem to import dv tape
please help me
thanks

Matrox has no bearing on this - RTX2 just passes video through. It uses Adobe settings for capture and export.
Make sure your playback settings reflect what you are trying to export. Try this:
1. External Device set to DV, etc.
2. Audio button set to "External Device Audio"
3. External Device set to your DV device, not None.
4. MPE set to software only in the Project panel.

Audio drop out and picture wobble during export to tape

I use a camera to capture footage from DV tapes - it's its only job and is always connected to the Mac.
But when playing back the footage from the FCP 4.5 timeline to make a back up DV copy of a finished job it all goes awry.
The audio cuts in and out - from normal audio to silence and back again at no regular intervals but every few seconds.
The picture wobbles just as though the camera isn't getting enough power (it is connected to the mains)I watch the playback with the camera's flip out screen.
On the computer it all looks fine. Playing back the DV tape shows me what I saw on the flip out screen - a wobbly picture with intermittent sound.
The cables are good. The camera works fine in all other respects, the external firewire drives work fine, the computer is good.
I'm stumped! I can't export to tape any more...
But exporting the files via compressor to make DVDs is fine - no problems.

Playing back the DV tape shows me what I saw on the flip out screen - a wobbly picture with intermittent sound.
The cables are good. The camera works fine in all other respects, the external firewire drives work fine, the computer is good.
Not quite sure how you reach your conclusion in the second paragraph. If it displays fine on the computer and is TOTAL JUNK after it heads out the firewire cable - I'd start with every piece of equipment that connects to the computer. Time to do A/B testing. find another camera, A-DV converter, firewire cables, even the computer and test each element.
good luck.
x

How to export to tape

Hi, i have camera panasonic dvpro200, and fcpx, with the FW, I edit my movie and i like to export it to tape thro the fw, but it not work, why

You can't export to tape with FCP X . . . it just doesn't do it.
The future of video shooting is on non-linear storage devices not linear tapes.
FCP X reflects this fact and caters mainly for such cameras.
We are lucky that Apple has permitted us to even import from a tape camera.

Can I export an .mp4 file created by Adobe Premiere Pro CS4 to tape using alternative software?

I am editng with Premiere Pro CS4 on a Windows XP system. I attempt to disable all startup and background software . When i export a one hour completed project to tape, I invariably get at least one glitch (momentary stop) on the resulting tape. Is there an alternate program I can use to export to tape an .mp4 file created by CS4?

Could be wrong, but as far as I know the only way to "export" to tape is to PLAY the timeline while the camera is connected via Firewire and in record mode

Can someone explain how to export to tape?

I see this window then I export to tape device control works nice, but I need to know what timecode is that? Why there is 4 timecodes and what do they mean>? I cant export to tape I want to export to betacam sony uvw 1400 deck. I can export by playing in timeline fine, but sometimes my computer crashes or timeline lags, so I want to use export to tape function for best results

>sometimes my computer crashes or timeline lags
You have a serious problem that you need to find and fix
First, work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link

Can`t export to tape

Similar Messages

Maybe you are looking for