Can't extend duration

I'm using Final Cut Express 2 and I can't extended the scrolling text in my timeline. If I control click and select duration and change it to 3:00:00 it keeps going back to 02:00:04. No matter what I do, even trying to extend it in the timeline, it won't allow me to go beyond the 02:00:04 length. I need to make it at least 3 minutes because the text is scrolling too fast. I've seen this issue in the past with stills in Final Cut Pro 4.0 HD as well. I'm used to using Adobe Premiere and this was never an issue.
PowerMac G5   Mac OS X (10.3.9)  

Create your text roll. Before you do anything else go to the Video tab. You'll see the available duration for the text. Dial in a new duration BEFORE you edit it into the timeline. Any length you want, but you have to do it before it's edited into the timeline.

Similar Messages

  • Extending duration of template

    I am using a template and want to extend the duration that it animates on screen. I display the timeline and drag the duration of a clip on a layer, however, it only lets me drag it so far. How can I extend the duration of the entire template so I can drag the layer farther?
    Thanks.

    If you look at the bottom right of the viewer you'll see a display in a eliptical box with the length in frames of the template (probably 300). Click and drag to the right to increase this number. If you want to significantly increase it, hold the SHIFT key down when you drag and the value will increase much faster. Or if you know how much you want to increase it, you can click in the box and type in a number.
    Once you've done one of the above, use the zoom slider to zoom out and view your whole timeline and lengthen your template as much as you want.
    Andy

  • Extend duration

    I'm using Final Cut Express 2 and I can't extended the scrolling text in my timeline. If I control click and select duration and change it to 3:00:00 it keeps going back to 02:00:04. No matter what I do, even trying to extend it in the timeline, it won't allow me to go beyond the 02:00:04 length. I need to make it at least 3 minutes because the text is scrolling too fast. I've seen this issue in the past with stills in Final Cut Pro 4.0 HD as well. I'm used to using Adobe Premiere and this was never an issue.
    PowerMac G5   Mac OS X (10.3.9)  

    If you need to make the scroll really long you have to set the duration before you bring it into the timeline. Drag the scroll into the browser from the timeline. In the duration column in the browser change the time to something more than you need. Edit it back into the timeline.

  • Can't extend music track

    One more question here, quite a learning curve with this new iMovie 11. I have a purple music track with a duration of 3:22 sec but it seems locked at 3:00 now and I can't extend it for some reason. Any ideas why? It's like my whole movie is frozen at 3:00 and I can't make it any longer?? When I select the whole music track, a yellow line appears all the way around it but there is no way to click and drag it to make it longer. I know in GarageBand, I can make a song longer by dragging the marker at the top of the window. But no such thing in iMovie. Hope this makes sense.

    The muic cannot be longer than the video clips and photos. iMovie is a visual medium.
    I would recommend adding some dummy clips at the end of your project and you will see all the music.
    An easy wasy to do this is to clip the Maps tab and scroll down. You will see both Black and colored backgrounds and animatic placeholders. Put one of these in and make it long enough and you will see your whole track.

  • I get a neighbor's wifi on my MacBook in my bedroom.  How can I extend the range to the MacMini in my living room?

    I get a neighbor's wifi on my MacBook in my bedroom.  How can I extend the range to the MacMini in my living room?

    You can't. It's not your network.

  • How can I extend a wireless network with my AirPort Extreme Base Station?

    Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
    The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
    So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
    -MacUser

    The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
    Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
    Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
    One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

  • Can TC extend a non-apple router via wireless?

    I believe this ground has been covered by prior questions, but I just need to confirm before giving up hope.
    Can the Apple TC extend a wireless network that eminantes from a non-Apple router (in my case, UBee, Time Warner Cable)?
    Our cable modem enters the living room, where it is plugged via ethernet cord to the UBee router. The range just barely reaches my upstairs office. In a perfect work, I'd like to keep the TC in the upstairs office so that I can a) share our USB printer, and b) extend our network to the second floor.
    Is this possible? I get the sense that it's not.
    Thanks for all your help,
    Mike

    Not possible except with WDS.. which means far too many compromises.. wep security, G only wireless.. and a very good chance it won't work anyway.
    Use EOP adapters and setup the TC as a WAP and switch.. or run ethernet .. they are the best ways.
    Turn off the wireless on the cable router.. and plug an extreme or express into it.. TC can then extend wireless.
    Again this is not the best solution but is the one apple's bottom line really likes.. which is why the limitation is there.

  • How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

    How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

    If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.

  • Can I extend the slideshow horizontal in a straight line but not full page up and down?

    Can I extend the slideshow horizontal in a straight line across the page end to end, but not full page up and down?

    Hi
    Please check these videos for help :
    https://www.youtube.com/watch?v=BDgERSf2a5k
    https://www.youtube.com/watch?v=diUtfwFGI1w
    Thanks,
    Sanjit

  • Can I extend a network with an AirPort Extreme Base Station Rather than with an Express?

    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?

    pcbjr wrote:
    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?
    Hiya.
    You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage.

  • Can i extend ram upto 2x8=16GB in pavilion dv6-3050tx?

    can i extend ram upto 2x8=16GB in pavilion dv6-3050tx?
    This question was solved.
    View Solution.

    Hi,
    The following link shows its specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02621602&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Max is 8GB.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have photoshop on pc and mac can i extend my licence

    I currently have a full master collection licence on my work pc and a cc subscripion on my work mac, ive just built a pc at home can i extend my cc licence to a mac and PC.

    Hi mheaders,
    You can install CC on two machines and work on both the machines at the same time. To install CC on the third machine you will have to purchase an additional subscription.
    Regards,
    Romit Sinha

  • How can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

    how can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

    Only AppleTV1 has an internal PATA drive. The largest PATA drive available is 250gb.
    Hacks are available to use the USB port on AppleTV1 to access more storage.
    AppleTV2 does not have an internal drive.
    Why do you need more storage in your AppleTV? iTunes streams video to AppleTV so no need to store it locally.

  • How can I extend the range of my chart?

    I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
    My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
    How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
    Thanks!

    "I want to add some series that are missing from the chart. How do I do that?"
    Here's a two step process to do that:
    Select the chart to show the the data selection on the associated chart.
    Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
    Grab the control handle (small circle) at the bottom right corner of the selection, and drag  right, as indicated by the blue arrow.
    Result shown below.
    Reassign colours and do other formatting as desired.
    Regards,
    Barry

  • HT1689 How can I extend the number of times my phone rings before going to answerphone

    How can I extend the number of times my Iphone 4s rings before it goes to answerphone

    Call you carrier and ask them how you can change this.  The number of rings before voicemail kicks in is set by your carrier.  Some have the option to do it from your phone if you know the sequence of codes to send, but you need to ask your own carrier how to do it for their system.

Maybe you are looking for

  • BI Content Tab, objects missing

    Hi, When i go to BI Content tab ib RSA1 or directly go with RSORBCT, I find that under BI content tab, there are no options available. That are genarally by-default, like Obects type, Roles, Infoobjects etc. Though my user id has been assigned with S

  • How do I get word file to convert to pdf

    How do I get word to convert to pdf? It worked yesterday and not working today.

  • How to attach f4

    how to attach f4 value request for selection screen as subscreen. The values is not coming for selection screen field. looking for help Regards, Satya Vani

  • Reloading Applet w/ a button....

    I have a tic tac toe game i just made, it pretty much works fine, except for few minor technical errors (such as the next player text being dispalyed after a win has occured.) However, what I would like to do is add a button that says "Play Again". S

  • Outlook Exchange on iMac - crashes

    I cannot get Outlook for Mac 2011 to run on my iMac, even though it runs fine on both my MacBook Pro and Air. It boots up, starts to connect to the Exchange Server, and before long it crashes. Here is an example of a detailed error message I have rec