Can't fast forward in QuickTime for iPhone 3.0?

Does anyone know how to get the slider bar that allows you to fast forward a Quicktime on iPhone 3.0? On the previous version, any quicktime apps had the volume slider on the bottom, and the play timer up top, which you could slide to forward to or go back to a time on the track. On 3.0, i only see the volume slider, and a 30 second rewind, and a 'next track' button. what if you want to fast forward?

I suspect it's the way they were recorded. I've seen that behaviour before with music and video files I have downloaded. I'm not sure of the actual reason or any possible solution.

Similar Messages

  • Can not fast forward though podcasts on iPhone 4.

    When I first got the phone I was able to fast forward though them. Then something happened three days ago and now I can't fast forward though them at all. When I'm looking at the podcast selection screen it shows '--:--' as the time for all the podcasts. When the podcast is playing it shows '-00:00' as the play time and the scrubber never moves. If I try to fast forward at all it just jumps back to the beginning of the podcast.
    Anyone find a fix for this?

    I have the same problem. But it happens in mp3 music as well as podcasts. The only solution I've found is to reboot my iPhone. It's kind of a hassle, so I'd like to see a fix from Apple.

  • When using imovie for Ipad, how can I fast forward a project to cut the length down?

    When using imovie for Ipad, how can I fast forward a project to cut the length down to fit under the 15 minutes required for Youtube? My current project is 23 minutes, and need to cut it down below 15 minutes. I was hoping to speed up the video. The content would actually be better viewed in at a faster speed anyhow.

    Jon,
    It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
    Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
    Good luck,
    Hunt

  • Apple TV- How can I fast forward through commercials while watching movies on Crackle?

    How can I fast forward thru commercials while watching movies on Crackle.
    I have done it during my first nigh of watching but now in my second evening, I can'r replicate.

    Hey koko3052,
    If you are having playback issues or questions for a specific 3rd party content provider on your Apple TV, you may find the steps and contact infomation outlined in the following article helpful:
    Apple TV: Troubleshooting third-party content providers - Apple Support
    Cheers,
    - Brenden

  • App Store on the iPad (iOS 6), can you view the Top Charts for iPhone?

    In the App Store on the iPad (iOS 6) can you view the Top Charts for iPhone? It used to be possible in a previous version of iOS.

    disregard post.

  • Can applw make a new software for Iphone 3g with multitasking

    can apple make a new software for Iphone 3g with multitasking

    No. Apple stated that the 3G does not have the processing power to provide multitasking to Apple's reuired standards.

  • I can't track my shipping yet for Iphone 6

    I can't track my shipping yet for Iphone 6, I got emailed yesterday with tracking number is anyone having this problem.

    ....shipping is being done by UPS I meant, I don't work for them..LOL

  • Can i install the battery 5S for iphone 5

    Can i install the battery 5S for iphone 5
    if it is possible kindly send me the link to buy it via the store.
    thanks

    the iphone isnt user servicable, if you do that, it will void all support from apple and us here.

  • Hi all can any bady forward me questionier for developing blue print in CRM

    hi friends
    Hi all can any bady forward me questionier for developing blue print in CRM Sales and Service
    my peronal email id is- [email protected]
    goods suggetion will be awarded
    gegds
    devi

    Dear Devi,
    You have taken a good decision.
    CR Docs:
    http://mysapbi.blogspot.com/2006/12/sap-crm-tutorials.html
    Sap CRM Help:
    http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
    SAP Building Block Library:
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    Service MarketPlace:
    https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000288472004E
    SDN CRM Links:
    Links to CRM Documentation
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Can you fast forward in movies?

    When I view a video, if I click the center button I sometimes see the "timing" bar (that shows time played and time remaining) although it doesn't seem to work all the time.
    Even when I see the bar displayed, it looks like I can't use the wheel to select a starting time to play from? I expected to see a diamond that I can move around just like when I play music.
    Am I missing something about the user interface, or do I just have to make sure I have the time to watch the whole video in one sitting?
    FYI, for some reason the video appears under "music video" rather than movies, I'm nt sure why nor do I know if this might have an impact on playback capabilities

    Hi Papa....
    I have the classic 80. While a video is playing, if I push the center button once, I can use the touch wheel to change volume. If I double click the center button, then I can scroll through the video to fast forward and reverse. When I find the section of video I want, then I click the center button again and it goes to the point I selected.
    Also, if I push and hold the right or left arrow, the video will fast forward and reverse. This way of fast-forwarding and reversing is not very precise. But it works for me.
    Hope this helps. Good luck.
    Message was edited by: david-iPod80Gb

  • How can I fast forward Audio Files without itunes?

    So I like having the ability to preview audio files directly in the finder folders. I would like the ability to fast forward and rewind them but I cant seem to figure out how to do it without opening itunes first. Kind of annoying. I like how in windows you click play on an audio file and windows media player opens and you can ffwd and rewind. Any Jedi's out there know how I can do this? Thanks!

    There are plenty of other audio players for Mac that are lighter weight than iTunes.
    I use VLC, but here are some others:
    http://www.apartmenttherapy.com/10-mac-osx-music-player-altern-139519

  • How can I fast forward in Podcast?

    I want to know how to fast forward in a podcast?  I can hold down the fast forward button and it goes a few seconds and I can rewind for a few seconds.  However I want to fast forward minutes.
    Any suggestions?  I see in the manual on page 62 about podcast and audiobook controlls but I don't have playback speed or a skip to any point in the timeline.

    To skip to any point on the timeline, drag the playhead along the scrubber bar.  While dragging, slide your finger down to slowdown the scrub rate.

  • Can`t fast forward youtube movie in Lumia 800

    Any one could help, I am unable to forward youtube movie with Lumia 800 which is quite annoying. Similar problem with Nokia Music as well if I want to fast forward any audio song I am unable

    If Music is playing and you push the volume button you can hold the forward button and it scrolls through the the number but for YouTube I don't know same problem on Lumia 900.

  • Can't fast forward videos on

    I've been trying to get transferring video from my linux machine working properly. I'm using iri'verter to convert to a suitably formatted xvid avi file.
    When I transfer that file to by Zen using gnomad2 or mtpfs, while I can play it, I cannot fast forward or rewind.
    If I copy the same file over to my windows machine and use the ZEN Media Explorer to transfer it, it works fine.
    I've even then pulled the file back off the Zen using mtpfs and it is byte identical to the original.
    It seems that the Windows software (or some facet of the interaction there) performs some sort of indexing of video file that is transferred, which doesn't happen if you use other tools...
    Any ideas?

    Hi ecognito,
    I have the same problem as I use a Mac. Only if you use the Creative Converter it is working fine for me...

  • Problem using QuickTime for iPhone

    Hi Everybody,
    I am a developer and i program an application for the iPhone. I want to know if it is possible to block the controller in the Quicktime player for iPhone ?
    I use the embed code with the "<param name='controller' value='false'>" but the controller is always here.
    I want to stream a video, where the user can't paused the video.
    Can you help me ?
    Thanks a lot

    I had this same problem and solved it when I realized that the software upgrade download was about 600MB, but I had less free space available on the iPhone.
    So I deleted some large music files to make space available, then started the upgrade again and it worked fine.
    One caveat: since I had "Automatically fill free space with songs" checked in iTunes, under the iPhone "Music" tab, simply deleting songs from the iPhone's playlist did not clear up the space.  Other songs got loaded to fill up the space.  I had to uncheck "Automatically fill free space with songs" as well as delete songs in order to free up the space.
    Hope this helps.

Maybe you are looking for

  • Find material and batch based on batch characteristic name

    Hi, I need to fetch all material and batch that have a particular batch characteristic. Can someone let me know how i can establish this link. I only have a characteristic name with me, need to find batches that use them. Thanks & Regards, Naresh.

  • Spark Skin - Trouble finding selected itemimage

    Hey All, I've applied this solution to my project http://www.flex4fun.com/Ex/ComboBoxNew3/ComboBoxNew3.html except what I want to do is display the image and not the text. In the skin for the solution above I replaced this <s:TextInput id="textInput"

  • ODI send email with latest error file attachment

    We have kick-out/error file with the format *err.txt. Whenever error occurs the same gets overwritten by the latest file. We are attaching this error file on the completion of the job. If error file generates, everything is fine. But, on the successf

  • How to update child item expense account as master item expense account

    Hi, As my master item expense account is not as same as child item expense account, I want to update child item through item import program, what should i do, please suggest thanks in advance Regards, Dhananjay

  • Tomcat server automatically close

    i made some changes to website n now my mentor say that tomcat server automatically shut down .can anyone help me what r the causes of automatically shuting of server n some links which help me .its very urgent thank in advance