Can't Figure Out How to Create a Pre-Set leaving Exposure Unchanged

LR4.3, Windows 7 Home Premium 64bit
I have been trying to create a preset that updates the Process Version to 2012, changes contrast, highlights and shadows, but leaves the Exposure unchanged.
So, I change the Process Version to 2012, set the sliders for contrast, highlights and shadows where I want, and then I create the preset, leaving Exposure (and a bunch of other things) unchecked.
Then, I apply the preset to a photo that is currently Process Version 2010. The process version, contrast, highlights and shadows all change as expected, but the Exposure goes to zero. What am I doing wrong?
Thanks!

Ok, additional information
If I apply this preset to a photo that is already Process Version 2012, then the exposure remains unchanged.
If I apply this preset to a photo that is a previous Process Version, the exposure is set to zero. Why? How do I fix this?

Similar Messages

How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB.

Can't figure out how to create an update form in a cfwindow tag

I finally was able to figure out how to do an add form inside
of a cfwindow tag yesterday. But I want this form to be
multipurpose, and allow edits as well. But for the life of me, I
can't figure out how to pass a row of data to the form inside a
cfwindow. Normally, I'd pass the primary key via the URL but if I
try to do that here, it basically reloads the page and closes out
the cfwindow since I have the window set to not show by default.
My page has a list of departments. My page is called
departments.cfm. For each row in the department list, there is a
link called edit. When the user clicks this link, I want the
cfwindow to open with the cfform populated with the data from the
department list for the row selected. Sounds simple enough, except
how do I pass the department_id to the form? If my link is <a
href="departments.cfm?id=#department_id#>Edit</a>, the
cfwindow tag displays and I can see the data in it, but then closes
right away. I finally figured out that it was calling the page
again and the cfwindow is closing because I have it set to not
display by default. I'm about ready to drop this cfwindow and just
do real popup windows via javascript. And I'm normally not in favor
of doing popup windows, but the application I'm working on doesn't
have enough real estate on the screen to do a hidden form, so a
separate window containing the form is my best solution.
Anyone have any suggestions?

Well, this is kind of a tough one for me, but it sounds like
the best way will be to launch a JavaScript function everytime the
user clicks the link, like this:
<cfoutput query="getDepartments">
<a href="javascript:showWin(#yourID#)">show
window</a>
<br>
</cfoutput>
the showWin function will both create the window and launch
it, passing in the user chosen var:
function showWin(id) {
var URL = 'editDeptPage.cfm?dept_id=' + id;
var winName = 'deptWin' + id;
ColdFusion.Window.create(winName, 'Edit the Department',
URL,
{x:100,y:100,height:300,width:400,modal:false,closable:true,
draggable:true,resizable:true,center:true,initshow:true,
minheight:200,minwidth:200 })
The following line of code is supposedly to make sure that
the window refreshes each time it is launched, by naming it
something new each time:
var winName = 'deptWin' + id;
However, if it doesn't work, I think there's a Window refresh
function in the Ext library but I'm not sure.
Also, in the showWin function, after the Window is created,
you might need this but I'm not sure:
ColdFusion.Window.show(winName)
Talk to you later,
Peter

Can't figure out how to create a Slideshow

I've read the online Help instructions. Read the Apple Support instructions and I just don't understand them. I'm new to iDVD and that's probably the problem. Can anyone send me detailed instructions on how to create a slideshow using my photos in iPhoto?

Why the limit of only 99 photos in a slide show?
Well the answer here deals more with Video DVD specifications than iDVD. The way iDVD builds slideshows each slide is more like a separate chapter, since these can have navigation buttons.
And here are some details of DVD authoring from http://www.dahnielson.com/dvdprimer.html
A DVD comprises of one or more video title sets, abrevated VTS, that contain the video and audio information as data streams. Each disc can have up to 99 VTSes, and each title set can be subdivided into 99 chapters.
So it is the way iDVD build the slideshows in "chapter-like" manner that limits you to 99 slides......going from iPhoto using Quicktime export or "Send to iDVD" quicktime avoids this limit. But you can use the iPhoto "Send to IDVD" with slideshows without the 99 limit....so you can put them on DVDs....
John

HT5312 When I get to the part where I need to fill out the 2-3 security questions, the option to send the answers to an e-mail does not show up, and I can't figure out how to create a rescue e-mail address. Help?

This problem is starting to aggravate me, as I have over $40 in iTunes credit that I can't use, as every time I try to purchase something it asks me to answer my security questions, which I have forgotten the answers to and have no way of recovering them. It also states that it is my "first" time purchasing something, though I've had this account for a while. Please help.

You need to contact Apple. Click here, phone them, and ask for the Account Security team.
It isn't possible to create a rescue email address without correctly answering at least two of the questions.
(86502)

I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten.

I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten. I need to download the product and I can't figure out where to begin.

Ask someone at your school... Do you have a Cloud redemption code, or a CS6 serial number?
If Cloud, Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html and
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
If CS6, download at Other downloads and enter your serial number when prompted
Again... your 1st resource is your school

I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where

I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections. I need to be able access files without going to acrobat.com. Help!!!@

Post the PDF files to a web site. The browse to them in Safari on the iPad. When you Open the files specify the Open to occur in Adobe Reader. Then you can have/Save them in your Documents folder on the iPad. An iPad has limited access to files otherwise.

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 on the page Am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

Click on the Layout button lower right and choose a Vertical lyout from the dropdown

I am creating a list. Page 1 is full and I can't figure out how to get to page 2.

I am creating a list. Page 1 is full but I can't figure out how to get to page 2.

It would help if you told us which ages version you use? Are you still on MacOs 10.6.8?
Did you use text boxes?

I created a folder from my camera roll and shared with my icloud acct, can't figure out how to access it from my computer?

I created a folder from my camera roll and shared with my icloud acct, can't figure out how to access it from my computer? I log onto icloud and can't find anywhere where "shared" photos are..

You need Mountain Lion (10.8.2 or higher) and iPhoto '11 (9.4 or higher) or Aperture 3.4 to get shared photo streams on Mac.
Another option to transfer them is to either import them to iPhoto using your usb cable, as explained here:http://support.apple.com/kb/HT4083, or to us an app like PhotoSync to transfer them to your Mac over your wifi. (PhotoSync will also transfer albums, not just photos from the camera roll.)

I am having trouble setting up icloud it keeps sending me back to install instructions and I'm just getting frustrated. So far I'm not liking the new itunes I can't figure out how to look at my duplicate music like I used to.

I can't sign on to icloud. It says I need an icloud account. I click the help option it send me back to the same page. I reinstall it nothing.
Download the iCloud Control Panel.
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).
ok I can't seem to set up iCloud on any device I don't understand... Ive already installed it three times.
Turn on iCloud.
From the Windows Start menu, choose iCloud Control Panel.
Enter the Apple ID you used to create your iCloud account and select the iCloud services you’d like to enable.
For mail, contacts, and calendars, you can use iCloud.com or Outlook 2007 or later.
there is no iCloud control panel but I click on i cloud. Then entere the Apple ID you used to create your iCloud account - WHAT!!!!? where is this I keep trying to find out how to create and iCloud account but I keep getting these stupid directions!!!
Enable automatic downloads.
To enable automatic downloads for your music, apps, and books, open iTunes > Edit > Preferences > Store and select Music, Apps, and Books.* (Requires iTunes 10.5 or later.)
- This is the only step that makes sense and already did it...
Turn on iCloud for the rest of your devices.
To get the most out of iCloud, set it up everywhere.
This is soooo frustrating!!!!
Also I want to be able to look at duplicate songs on my itunes but after I downloaded the new version I can not figure out how to get that back. If the duplicate setting isn't in the new itunes I want the old version back.

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Can't Figure Out How To Implement IEnumerable T

I have no problem implementing IEnumerable but can't figure out how to implement IEnumerable<T>. Using the non-generic ArrayList, I have this code:
class PeopleCollection : IEnumerable
ArrayList people = new ArrayList();
public PeopleCollection() { }
public IEnumerator GetEnumerator()
return people.GetEnumerator();
class Program
static void Main(string[] args)
PeopleCollection collection = new PeopleCollection();
foreach (Person p in collection)
Console.WriteLine(p);
I'm trying to do the same thing (using a List<Person> as the member variable instead of ArrayList) but get compile errors involving improper return types on my GetEnumerator() method. I start out with this:
class PeopleCollection : IEnumerable<Person>
List<Person> myPeople = new List<Person>();
public PeopleCollection() { }
public IEnumerator<Person> GetEnumerator()
throw new NotImplementedException();
IEnumerator IEnumerable.GetEnumerator()
throw new NotImplementedException();
class Program
static void Main(string[] args)
// Create a PeopleCollection object.
PeopleCollection peopleCollection = new PeopleCollection();
// Iterate over the collection.
foreach (Person p in peopleCollection)
Console.WriteLine(p);
Console.ReadLine();
That code compiles (basically because I haven't really done anything yet), but I get compile errors when I try to implement the GetEnumerator() methods.

The List<T> class implements the IEnumerable<T> interface, so your enumerator can return the GetEnumerator call from the list.
class PeopleCollection : IEnumerable<Person>
List<Person> myPeople = new List<Person>();
public PeopleCollection() { }
public IEnumerator<Person> GetEnumerator()
return myPeople.GetEnumerator();
IEnumerator IEnumerable.GetEnumerator()
return myPeople.GetEnumerator();
class Program
static void Main(string[] args)
// Create a PeopleCollection object.
PeopleCollection peopleCollection = new PeopleCollection();
// Iterate over the collection.
foreach (Person p in peopleCollection)
Console.WriteLine(p);
Console.ReadLine();

Can't figure out how to keep two different sites...

How can I keep two sites and be able to get to both of them. When I create an iMovie and go to the share tab to share it wants to put it in the last site I created. What if that's not the site I want it on? I can't figure out how to go back and forth to the sites and update them without them writing over each other...

Baldredlion:
Regarding Varkgirls suggestion about iWebSites:
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
Do you Twango?
15 MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.9) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

CAN'T figure out how to make/edit movies in QuickTime Pro...

I can't seem to figure out how to creat and edit movies in Quicktime Pro. I would do this in windows movie maker as its sooo simple, but it doesn't save in a format that works on a mac computer (I'm emailing the video to someone who uses a mac!). And, I can't seem to find a program that is as easy to use as Windows Movie Maker...PLEASE help me, I really NEED to get this movie in a format to work on a Mac! I'm at a total loss as to what to do! And I can't seem to find a tutorial, either!
=( Kourtney

First of all, Quicktime is not really an "editing" program in the traditional sense. If you are expecting to really edit in QT Pro, you will be disappointed. Yes, you can actually import video directly into QT Pro and edit it, but the functions will be limited to roughly selecting chunks of video and deleting them, and you won't have frame-accurate control like other real editing programs. But lets start at the beginning: 1) Your post does not give enough information to anyone for them to help you. Where are the videos coming from that you want to edit? Camcorder? Digital camera that takes MPEG movies? VHS or DVDs? 2) The answer to #1 will be the clue as whether you are plugging a USB device or a Firewire device into the computer. Once this is determined, then instructions will vary as to how you go about editing. 3) I'm not sure if you are using QT Pro on a PC or a Mac. If you have a Mac, why don't you use the built-in video editing program that came with your computer? It's called iMovie? Quicktime can convert some video files into something that is compatible with iMovie, if they're not already. If you are using QT Pro on a PC, then I'm a little unfamilar as if it works exactly the same between between a Mac and PC. Seeing that you come from the PC side of the Universe, I'd bet that you are trying to plug in and use a USB device. On a Mac, QT Pro can record video directly from a camcorder, but it needs to be connected via Firewire. Otherwise for something transferred via USB, you most likely have an MPEG file. QT Pro can open this, but again, the editing will be very rough as QT is not a refined edit program.
Message was edited by: Daniel Filice
Message was edited by: Daniel Filice

Can't Figure Out How to Create a Pre-Set leaving Exposure Unchanged

Similar Messages

Maybe you are looking for