Can't figure out how to put a Line "-" over and "E" for pronunciation...

I can see how to do it for other accent marks but not for the straight line.
Using Appleworks, I would like the "E" in "TELA" to have a line "-"over it, so it is pronounced properly.
I have been at this for at least two hours.
Any suggestions?
thanks
Powerbook Mac OS X (10.4.6)

One could use the Equation Editor to construct any character under a bar quite easily. Launch Equation Editor from the Edit menu. Choose a font that matches your text and set the style to "text". Begin typing your word. When you get to the letter(s) requiring the overbar, select the overbar from the appropriate dropdown menu (the one you want is just right of center in the bottom row), then type your character(s). Hit the right arrow one time (and you'll probably have to reset the font style to "text" again) and continue typing your word. Close the Equation Editor window to place the entry into your document.

Similar Messages

Can't figure out how to PUT

First off, I'm a Newbie to Dreamweaver. So. I'm in a real
learning phase.
I can't figure out how to "Put" my development file to my web
Server. I have an ftp connection. At least I think I do since I
have file list that seems to be pointing to the files I have on
webserver. I manually copied my files from my development folder to
my web server. Now I want to use Dreamweaver to put my files and
then I want to have Dreamweaver manage my file so that next time I
one have to upload my "Changed" files. I searched Dreamweaver Help
and didn't understand what I read. Sorry..
Appreciate any help you can give me, or point me to somewhere
on the web that my a step by step procedure.
Thanks....

Please tell me this - when you look at the name of the site
in the drop-down
list of defined sites on the left top of the Files panel, do
you see a
folder icon, or a little computer icon?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"bruceaj" <[email protected]> wrote in
message
news:epr3mt$4mu$[email protected]..
> First off, I'm a Newbie to Dreamweaver. So. I'm in a
real learning phase.
>
> I can't figure out how to "Put" my development file to
my web Server. I
> have
> an ftp connection. At least I think I do since I have
file list that seems
> to
> be pointing to the files I have on webserver. I manually
copied my files
> from
> my development folder to my web server. Now I want to
use Dreamweaver to
> put my
> files and then I want to have Dreamweaver manage my file
so that next
> time I
> one have to upload my "Changed" files. I searched
Dreamweaver Help and
> didn't
> understand what I read. Sorry..
>
> Appreciate any help you can give me, or point me to
somewhere on the web
> that
> my a step by step procedure.
>
> Thanks....
>

Can not figure out how to put my music in my library onto my ipod shuffle?

can not figure out how to put my music in my library onto my ipod shuffle?

Hello jacquekatiecam
The article below will walk you through setting up and syncing music to your iPod shuffle.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
Regards,
-Norm G

I recently updated by iphone 4s but can't figure out how to put icons on the desktop as short cuts to my games.

I recently updated my iphone 4s but can't figure out how to put my game icons on the front page to use as shortcuts to my games. Anyone know?

Dear Friend ,
Can you please be more clear by mentioning what do you mean by shortcuts to the games ?
Still Here is what it takes you to get what you want .
Firstly , your iPhone by default comes with preset of 16-18 Apps in your Homescreen (including Dock)
Make sure your apps are installed either directly from the app store in your phone or through iTunes in your Mac or PC
once they are installed you can notice them by swiping the homescreens.
Long press the app icon , you can notice they all would be in "jiggle" mode
Drag them and place them in your home screen

I am trying to connect my new iMac to my Buffalo router. I forgot my router password, so I reset it and it is working. I can't figure out how to reset my router password and lock it on my iMac.

I am connecting my new iMac to my Buffalo router. I forgot my router password so I pushed the reset button and my computer was able to connect. The problem is, I can't figure out how to set my new password and lock the router. I went to the Buffalo website and downloaded the CD, as I can't find that either. I can't open any of it because it says it is Windows and can't open it. I am new to Apple!

kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution.

I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!

I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!

If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

I can't figure out how to put a login form on my site

Hello, I have a site that I created in flash and I need to add a login to a site caleld sharefile. This form works correctly in html but I can't get it to work in my flash file. Can anyone please help me out with transferrign this simple html form into flash. Here is the code snippet:
<form method="post" action="https://fmc-service.sharefile.com">
<table cellspacing="0" cellpadding="0" border="0">
    <tr><td>Email:</td></tr>
    <tr><td><input type="text" name="username" /></td></tr>
    <tr><td height="5"></td></tr>
    <tr><td>Password:</td></tr>
    <tr><td><input type="password" name="password" /></td></tr>
    <tr><td height="10"></td></tr>
    <tr><td><input type="submit" value="Log In" /></td></tr>
    <tr><td height="10"></td></tr>
</table>
</form>
I have the input text ready with one input box labeled username and the other labeled password in flash and on the submit button I have the script:
on (release) {
    getURL("https://fmc-service.sharefile.com", "", "POST");
When I publish the file it takes me to the right website but it does not log me in. It just acts as if I just put a regular link to the sharefile login page. I figured this was too simple. Any help would greatly be appreciated.
Thanks,
Jason

if you're testing locally, you probably have a security sandbox issue. fix it here:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml
otherwise, you don't have username and password defined on the timeline that contains your button and/or your button is a movieclip button

HT2534 I have already set up an Itunes account, but it says that i need to review the account. I guess i am not finished setting it up yet. I don't have a credit or debit card, and now i can't figure out how to put in 'none.' How do I do this??? Pleaase

I have already set up and Itunes account, but it says that i need to reveiw the account. I guess i have not finished setting it up yet. But when i go into the payment information it says that i need to fill out the type of credit/debit card that i have. Well, i don't have one! How do i put that i have 'none?' it doesnt even have a 'none' button. PLLEEAAASseeee help me!!! Please:)

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

Can't figure out how to put Site Meter or Statcounter on my site?

Hi,
I'm using Notebook style for my website and wanting to put Sitemeter or Statcounter on the footer of my first Welcome page and it's all like a graph border thing. So I followed the instructions of how to do it with Sitemeter, use a text box and then type some code in and paste. Then I tried to do it with Statcounter and had a phrase where I wanted it to go on the footer.
I'm using Transmit FTP and you can edit the HTML before you publish and I the copy paste for the code. When I go to publish it to my website all I see is the HTML code come up and not the counter at all. What am I doing wrong?
S.

varkgirl,
I haven't tried this yet but I think I know what the problem is, I was doing the edit in Transmit FTP before I publish to my server instead of after and I'm guessing that is why it didn't work.
Right now I'm focused on getting my pages down with photos and text and it's a big job since I have a lot of products.
S.

I have never used my mac for desktop publishing before and am having some problems. This sounds really dumb, but I can't figure out how to put a border around a text box. Also, how do you edit the border, i.e. border color, thickness, etc. Help!

I have never used my mac for desktop publishing before and am running into some real problems. How do you put a border around a text box? Can you edit the border - color, thickness, etc.? Help!

I think the best solution is to read Pages documentation, go to Help and you have a long list of options. Pages is capable of quite sophisticated things, some features are above Nisus or Mellel, so it is not so simple to summarize things in a few lines.

HT2188 How do I download and install iTunes to my new computer. I had everything on the old computer but can't figure out how to put it on the new one.

How do I download and install to my new computer? This is not a new IPod (classic), I had everything on the old cpu. Thank you in advance for any help you can give me.

aholli11 wrote:
How do I download and install to my new computer?
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

Officejet Pro L7780 Offline, can't figure out how to put back online??

Hi, My power went out a couple of days ago and my printer wasn't on when I came to use it. I unplugged and replugged in and now it is on but won't print. It says it is offline. I have re-configured the network and it show on my computer but won't print still says offline. Please help. I have things I need to print asap;!!

Please describe your system:
What computer operating system?
What router, encryption and ISP?
Did you have a static IP address set for the printer?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT201493 After recent iOS update, no longer have names and pics, but only email addresses of friends? Can't figure out how to put names/pics back on. Suggestions??

Advice??

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

I updated iTunes on my computer and now I can't figure out how to put songs on my iPod

Before I could just hit the "On this ipod" or whatever it was button, and do the whole drag and drop thing and it was all good. But now that button is gone and I don't know what I'm supposed to do. help?!

IUf iTunes sees the iPod:
iTunes 11 for Windows: Syncing overview
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Mac: Syncing overview
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
If iTunes does not see the iPod:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Keychain was not set up correctly, and i can't figure out how to edit or change the phone number for it. can anyone help?

I did the whole thing when i bought my MBP, now a year or so later its getting more annoying asking for my keychain password aldo keychain seems like a neat feature that i don't want any info texted or sent to the other number i entered.

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Can't figure out how to put a Line "-" over and "E" for pronunciation...

Similar Messages

Maybe you are looking for