Can't Figure Out Why iPhone 5 Battery Will Not Last

New to the community and looking for some extra insight into my problems.
Cliffs Notes: iPhone 5 won't last more than 4-5 hours on a single charge.
When I got my iPhone 5 on launch day I set it up as a new phone and did not restore from a backup. Only iCloud was able to sync my contacts, calanders, etc.... I setup up everything while hooked up to my MacBook Pro with iTunes. The first day the phone lasted almost 8 hours, it was mostly on WiFi while at the house. It seems whenever I don't use WiFi and am on the 4G network here in Albuquerque, NM that I can't go more than 4-5 hours on a battery charge. The signal is usually 4 bars or more, AT&T. I can't get anywhere near the reported 8 horus of use. The battery also seems to drain too fast while in standby over night. I loose about 10% over 8 hours at night. I should be at 4-5% for 8 hours.
For troubleshooting:
I have had the phone replaced, didn't seem to solve anything.
I've setup the replacement phone as new and didn't help
I've turned off all services like Siri, Push, Location, Notifications, etc... and the battery still drains
I've uninstalled most every app except for a handful of critical apps to me and doesn't help
I've used the reset settings and hasn't helped
My thought is it is related to the cellular data being on. I get better battery when connected to WiFi, but when on cellular data it kills the battery.
I've been running the Carat app for a few days to see if it reports anything.
About the only thing I haven't tried is doing a DFU restore and setting up as new and not doing anything after that to watch the battery life.
Anyone have any ideas or suggestions?

Have you tried resetting the phone?
Resetting Your Device: Hold the home button + the lock button for about 10-12 seconds until the Apple logo appears. You will not lose any data or current settings.

Similar Messages

I can not figure out why acrobat reader will not re-install on my vista business laptop.

I had reader forever. I had a problem with Flash so I un-installed everything to do with adobe. No I have re-installed flash and activex but adobe reader will not istall or download from the website. Please help me get a download link for reader.
I have 64 bit windows vista business.
thanks
josh

You can try using this tool to first remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer.

All of a sudden my new iphone will not hold a charge even when it is not being used and I can't figure out why???

my battery drains even when iphone is not being used. It is a relatively new phone and this battery draining just started and I can't figure out why????

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

Whenever I text this one person, his messages come up green. He has an iPhone and so do I, I can't figure out why our messages are green

Whenever I text this one person, his messages come up green. He has an iPhone and so do I, I can't figure out why our messages are green
We've tried reactivating iMessage, deleting threads, and contacts but nothing seems to work. Has this happened to anyone else?

Restart both devices (press the HOME and power button until the Apple logo appears then releasae). If both devices have iMessage turned on and to send as SMS when iMessage is not available, the the green messages are indicative of iMessage not being available on one or both devices.

HT4993 When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

Can't figure out why my iMac is so slow

My 2.16 Intel Core 2 Duo iMac has suddenly slowed to a crawl, and I can't figure out why. Opening anything (including a Finder window) results in a 30 second to 5 minute lag. I've seen the spinner more in the last month than I did in the previous 4+ years of owning it.
Since it's my spare machine now, I completely re-formatted the hard drive and did a fresh install of 10.4.7 from the discs it shipped with. I have run the Apple Hardware Test, and everything tests OK. Disk Utility tells me there's nothing wrong with the disk, and all permissions are good. What am I missing?

Earl...
I know you said you reformatted the drive but just in case, how much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
fresh install of 10.4.7
Most recent version for Tiger is v10.4.11. Have you tried updating the software from the Apple menu > Software Update?

Can't figure out why it's throwing this exception

Can anyone see a problem with this method? I have checked over everything and can't figure out why it's giving me an exception. All of the get methods are retrieving data and the db table and all the fields are correct.
    // add a Reservation to the database
    public static void addReservation(Reservation aReservation)throws Exception
     try
         String query = "INSERT INTO Reservations (Number, ContactAlias, SPOC, SRNumber, StartDate, EndDate) " +
                       "VALUES ('" + aReservation.getNumber() + "', " +
                       "'" + aReservation.getContact() + "', " +
                       "'" + aReservation.getSPOC() + "', " +
                       "'" + aReservation.getSRNumber() + "', " +
                       "'" + aReservation.getStartDate() + "', " +
                       "'" + aReservation.getEndDate() + "')";
        reservationList.removeAll();
          reservationUIList.removeAll();
          Statement statement = connection.createStatement();
        statement.executeUpdate(query);
          open();
          if( reservationRS !=null)
        while( reservationRS.next() )
               aNumber = reservationRS.getString(1);
               reservationList.add(aNumber);
               reservationUIList.add(aNumber);
          statement.close();
        close();
     catch (Exception e)
            System.out.println("Caught exception in addReservation of DM.");
            throw e;
     }And the exception:java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
     at ReservationDM.addReservation(ReservationDM.java:149)
     at Reservation.addReservation(Reservation.java:268)
     at ReservationUI.invokeAdd(ReservationUI.java:552)
     at ReservationUI.actionPerformed(ReservationUI.java:285)
     at java.awt.Button.processActionEvent(Button.java:324)
     at java.awt.Button.processEvent(Button.java:297)
     at java.awt.Component.dispatchEventImpl(Component.java:2588)
     at java.awt.Component.dispatchEvent(Component.java:2492)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:334)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:126)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:93)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:88)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:80)Thanks,
Shawn

Well, one extreme that I eventually had to go to was inserting a new row with only the primary keys, which were numerical columns, while just setting the strings to empty values.
INSERT INTO Courses VALUES(?,?,?,1,0,?,'','','','','','','','','')
Access finally seemed to handle this without barfing.
Then, I updated each string column ...if you can believe it ...one at a time in a for loop from a custom 'RowUpdateSet' object. This actually worked well because eventually I also used it to update the row when necessary, and to only update columns whose values had changed. One teeny weeny snippet from a great deal of code looked like this...
for ( int i=1; i<length; i++ ) {
    if ( updateSet.getUpdateColumn( i ) ) {
      synchronized ( updateSet ) {
        scrollResults.updateObject(i,(String)updateSet.getUpdateValue(i));
        scrollResults.updateRow();
}I guess I will likely get flamed for participating in this whole discussion, because it all does become quite irrational. I can see why peoples initial response is likely ..."what, couldn't you even debug your own sql string bozo?" All I know is, there seems to be insert statements that Access just mysteriously refuses to perform ...and it has nothing to do with terminated strings or syntax errors. How you choose to perservere and 'get the job done' is probably as unique to each individual as is the whole mysterious error in the first place. I just got tired of staring at what appeared to be a totally disfunctional environment and decided to go around the problem and get done with the project ...which eventually worked like a charm.
This is exactly what I meant when I said don't look too closely or you might wind up distrusting this technology you are working with on a day to day basis. Frankly, the more I work with technology the more I realize that I, for example, will never use my credit card over the web (particularly with .NET in the picture). I am sure you can find another way to get to the results you want if you think about it creatively. I got my project done. I just didn't get there in the way I had expected I would. Maybe that's not even a bad thing, even though it can be extremely frustrating at times. When we look at all the disclaimers that come with software these days, or look at faster and faster computers that just run slower and slower, maybe we shouldn't expect so much from technology. At least Java allows you to write your own logic and often work around these impediments ...which is still alot better than being stuck with .COM libraries that force you to abandon a project half way through when you find out the library fails to live up to its claims in the reference manual.
Sorry your project is on hold at the moment. If no one else answers, start a new thread that asks your question again, and I will butt out. Maybe there is someone who has found out what causes this issue. After all, I can only speak from my own experiences ...and I am far from being an authority on any issue surrounding technology. Good luck, and don't give up. I am sure there is a way to get where you want to go.
After saying all that, I realize kev wrote a response while I was composing this one. As he implores, yes ...do be certain you have eliminated all the obvious possibilities before you adventure into any painfull work-arounds. Really, I wish you all the best of luck.

Almost every time my daughter FaceTimes me, another person answers and he is getting very annoyed. I have checked my settings and can't figure out why this is happening.

Almost every time my daughter FaceTimes me, another person answers and he is getting very annoyed. I have checked my settings and can't figure out why this is happening.

Is she facetiming your phone number or email address, b/c email address should not do that.. Was there an old iPhone associated with your number or email? I've seen texts show up on long "deactivated" devices..

I can't figure out why this page splits in live preview... but not in the browser?

I've finally got my site up and it all runs great... except I can't figure out why this one page behaves like it's too wide.
http://www.johnnez.com/mainbooks.html
It comes apart in the Live Preview.... but not in the browser preview.
Thanks for any tips...
jn

john nez wrote:
HTML is a total incrutable mystery to me... a mystery inside a mystery inside a mystery!
Sounds to me like you've almost cracked it!
You have one error that could cause problems and that's the stray </blockquote> tag. Just delete it.
The alt="" text will show as an error on the validator but that's easy to fix and worth doing.
Here's an easy article on that: http://www.456bereastreet.com/archive/200412/the_alt_and_title_attributes/
In one of your CSS files (JonzheaderindexCSS.css) you have this:
body {
margin-top: 20px;
padding: 0;
color: #666;
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
line-height: normal;
background-attachment: fixed;
background-color: #E1B852;
background-image: url(../images/orange%20plaid.jpg);
background-repeat: repeat;
html { overflow-y: scroll; }
It should be like this:
html {
overflow-y: scroll;
body {
margin-top: 20px;
padding: 0;
color: #666;
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
line-height: normal;
background-attachment: fixed;
background-color: #E1B852;
background-image: url(../images/orange%20plaid.jpg);
background-repeat: repeat;
It looks like you have that rule repeated further down the page like this:
html { overflow-y: scroll; }
There's an extra curly brace there (}) anyway, so it is badly formed but the whole rule and extra curly brace can go.
You can fix those errors but I have a sneaky suspicion that it isn't gong to solve the issue you describe.
Fix those issues anyway and post back. Maybe if you can show a screen shot of what you are seeing in DW it might help?
Martin
PS: It's never a good idea to have file names on the web that have spaces in. Your background rule has this:
background-image: url(../images/orange%20plaid.jpg);
That .jpg should be orangeplaid.jpg or orangePlaid.jpg or orange_plaid.jpg and the change should be reflected in the reference to the image so, orangePlaid.jpg should be:
background-image: url(../images/orangePlaid.jpg);

I tried to Skype someone but I can't see them but they can see me and I can't figure out why?

I tried to Skype somebody and they can see me but I can't see them and I can't figure out why?

I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc and try to repair the drive. Then try the upgrade again.

Apex bug? Items being cleared in session state - can't figure out why

I have an item that is being submitted with a value but is then being overwritten and set to null. I can't see any reason why the submitted value is being overwritten with null.
I have been debugging this problem for most of the day and can't figure out what is happening and was hoping someone in the forum might be able to shed some light.
Some details:
The item is on Page 0, has source type of "PL/SQL Expression or Function", a source expression of "V('REQUEST')", and Source Used = "Always".
I viewed the HTML source of the rendered page and can see the following HTML, so I know the item has a value when the page is rendered:
<input type="hidden" id="RENDER_REQUEST" name="p_t08" value="EDIT" />
I have used Firebug to view the HTTP POST body and can see that p_t08 is being correctly submitted with a value of "EDIT" in the post body.
When I run the page in debug mode and then view the debug log, I see that Apex is indeed setting this item to null:
     0.01500     0.01600     A C C E P T: Request="WIZ_NEXT"
     0.23400     0.00000     Session State: Save form items and p_arg_values
     0.24900     0.01600     ...Session State: Save "BRANCH_TO_PAGE_ID" - saving same value: ""
     0.24900     0.00000     ...Session State: Save "ROWS_PER_PAGE" - saving same value: ""
     0.26500     0.01500     ...Session State: Save "P0_CLEAR_WS" - saving same value: ""
     0.26500     0.00000     ...Session State: Saved Item "RENDER_REQUEST" New Value=""
I can't figure out why the item is being set to null.
This problem also does not occur on every page. The pages in question are a multi-step "wizard" that allows the user to navigate between steps with "Next" and "Previous" buttons. Since this is a page 0 item, it appears on every page in the wizard so I'd expect it to behave the same. When you open the wizard at step 1 and press next to go to step 2, the item (RENDER_REQUEST) is set correctly on step 2 of the wizard, BUT when you then click Next to go to step 3, RENDER_REQUEST is null on step 3. If you open the wizard at step 2 and press Next, RENDER_REQUEST is null on step 3.
I did find a work around, but it doesn't make any sense why it would work: if I move the RENDER_REQUEST item from the "Footer Items" region to a page level item (by using Edit All and setting its region to blank), then the problem goes away. If I move it back to the "Footer Items" region the problem reoccurs.
I am working on Application Express 4.0.2.00.07 on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0.
Any help would be greatly appreciated!
Thank you.

Hi Patrick,
Thanks for the quick response. Unfortunately, I can't reproduce this on apex.oracle.com due because the app requires PL/SQL packages to be installed in several schemas, including some that require system grants (I gave a presentation at Oracle Open World a couple of years ago on some of the techniques I used in building this application that you attended; I think the session was called "Building Large Commercial Applications with Oracle Database 11g and Oracle Application Express").
Is there another way we can work together to debug this without reproducing it apex.oracle.com? For example, if you could send me an instrumented version of the APEX_040000.F procedure (or whatever procedure is clearing the session state) that has some additional APEX_APPLICATION.DEBUG calls, I could install it on my server, reproduce the error and send you the output.
Thank you,
Eric

Can't figure out why I'm dropping frames during capture

I'm dropping frames when capturing 1-hour Mini DV tapes and I can't figure out why.
I'm capturing on a Mac Pro (Early '08) with 8 GB of memory running FCP 7.0.3 and OS X 10.6.6. I'm capturing to a 4 TB G-Speed eS (eSATA) formatted as RAID 5 (Non-Journaled Extended) with about 750 GB of remaining space. I'm capturing via FireWire with a Canon GL-2. This should be a breeze for this system.
I've run Apple Disk Utility, Disc Warrior 4 and Techtool Pro 5 on the drives and they seem to be fine. I've unplugged all USB and FireWire devices besides the keyboard and mouse. No virus protection or background utilities are running. I've trashed preferences. AJA System Test shows a 286 MB/s write speed and 254 MB/s read speed. Blackmagic Disk Speed Test shows a 312 MB/s write speed and a 379 MB/s read speed. No other applications besides FCP are running. I edit 1080p HD footage on this system all day long with no issues but when I try to capture DV SD footage, I run into issues.
The dropped frames error does not ever occur in the same place on the tapes. The tapes are brand new and don't seem to have any time code issues. The only thing I haven't done is to defragment the hard drives. I wouldn't think that capturing simple DV video would be that demanding; the defragment for a 4 TB RAID would likely take 2 or 3 days.
Any other ideas on what's going on and how to try to fix it? Thanks!

Thanks for the prompt reply, Studio X. Yes, I'm using FireWire Basic and no other FireWire devices. I've switched FireWire cables, although I doubt that's the issue as the cable I was using was brand new and fit snuggly. Unfortunately, I don't have an alternate playback device right now. Would switching to Non-controllable device capture settings be worth a try?

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts?

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts? I have closed everyting I can, even took the phone to Verizon and they are not sure what is going on. My company email is active and pushes to the phone....I use Safari regularly to look up stuff for personal and work use. I am on Facebook but have turned it off in notifications. Four phones and a hotspot on the account....we have 6g and have never come close to it, until lately and it's my phone that's eating up the gigs. So what the heck is going on?

Go to Settings/Cellular and you can see how much data each app is using. You can Reset Statistics, then track all of the apps data usage.

Can't Figure Out Why iPhone 5 Battery Will Not Last

Similar Messages

Maybe you are looking for